Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inert atmosphere”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Characterization of Ba2YCu3O(7-x) prepared in an inert atmosphere

Reaction data, X-ray data, and critical temperature measurements have been used to show that superconducting Ba2YCu3O(7-x) can be produced in an inert atmosphere using BaO2 as the barium source. Weight loss data are presented for samples produced in O2 and N2. The use of BaO2 is found to result in decreased levels of intergrain BaCO3. The necessity for total inert atmosphere handling and tighter control of the carbon content of starting materials is pointed out. It is shown that materials made with BaO2 and handled in inert atmospheres can be used to improve the J sub c of melt processed materials.

Hepp, A. F.↗
NASA NTRS1969

Two systems developed for purifying inert atmospheres

Two systems, one for helium and one for argon, are used for purifying inert atmospheres. The helium system uses an activated charcoal bed at liquid nitrogen temperature to remove oxygen and nitrogen. The argon system uses heated titanium sponge to remove nitrogen and copper wool beds to remove oxygen. Both use molecular sieves to remove water vapor.

Foster, M. S.↗
NASA NTRS1970

Oxidation-resistant coatings for refractory metals used in inert atmospheres

Test conditions and results are reported for various coatings on a 1 percent zirconium columbium alloy at a temperature of 2000 deg F. Molybdenum silicide over molybdenum is most effective coating, tin-aluminum coating is adequately protective, chromium-molybdenum silicides are not protective.

Phillips, W. M.↗
NASA NTRS2012

SEVO (Space Environment Viability of Organics) Preliminary Results from Orbit

SEVO (Space Environment Viability of Organics) is one of two astrobiology experiments onboard the NASA Organism/Organics Exposure to Orbital Stresses (O/OREOS) cubesat, launched in November 2010. The satellite is still operational with nominal performance and records data on a regular basis. In the SEVO experiment, four astrobiologically relevant organic thin films are exposed to radiation in low-earth orbit, including the unfiltered solar spectrum from approximately 120 - 2600 nm. The thin films are contained in each of four separate micro-environments: an atmosphere containing CO2, a low relative humidity (approximately 2%) atmosphere, an inert atmosphere representative of interstellar/interplanetary space, and a SiO2 mineral surface to measure the effects of surface catalysis. The UV/Vis spectrum of each sample is monitored in situ, with a spectrometer onboard the satellite.

Cook, A.↗
NASA NTRS1993

Chamber free fusion welding root side purging method and apparatus

A method and apparati are presented for non-chamber root side purging in fusion welding of oxygen reactive metals which require that the molten weld zone and local solid areas of the weld seam remaining at high temperatures be shielded from normal atmosphere to prevent degradation of the welded area. The apparati provide an inert atmosphere to the root side of a weld joint through a porous medium whereby the jet-like thrust of the plasma arc actually draws the continuously supplied inert atmosphere into the path of the molten or high temperature solid weld zone. The porous medium is configured so it can be placed at the borders of the weld seam and substantially parallel to the seam without restricting the view of the root side of the seam. The inert gas is dispersed evenly through the porous media and across the weld seam, at the point of arc penetration and in front of and behind the arc. The apparati can be constructed so as to limit the amount of inert gas flow and can be mobile and travel synchronously with the welding arc.

Mcgee, William F.↗
NASA NTRS1995

Chamber free fusion welding root side purging method and apparatus

A method and apparati are presented for non-chamber root side purging in fusion welding of oxygen reactive metals which require that the molten weld zone and local solid areas of the weld seam remaining at high temperatures be shielded from normal atmosphere to prevent degradation of the welded area. The apparati provide an inert atmosphere to the root side of a weld joint through a porous medium whereby the jet-like thrust of the plasma arc actually draws the continuously supplied inert atmosphere into the path of the molten or high temperature solid weld zone. The porous medium is configured so it can be placed at the borders of the weld seam and substantially parallel to the seam without restricting the view of the root side of the seam. The inert gas is dispersed evenly through the porous media and across the weld seam, at the point of arc penetration and in front of and behind the arc. The apparati can be constructed so as to limit the amount of inert gas flow and can be mobile and travel synchronously with the welding arc.

Dailey, J. R.↗
NASA NTRS1969

Isothermal drop calorimeter provides measurements for alpha active, pyrophoric materials

Isothermal drop calorimeter measures the heat content of intensely alpha active and pyrophoric materials in inert atmospheres. It consists of a furnace, calorimeter, and aluminum isothermal jacket contained within an inert-atmosphere glove box, which permits the use of unencapsulated materials without exposing personnel to alpha contamination.

Savage, H.↗
NASA NTRS1996

Molecular Dynamics Simulation of Carbon Nanotube Based Gears

We used molecular dynamics to investigate the properties and design space of molecular gears fashioned from carbon nanotubes with teeth added via a benzyne reaction known to occur with C60. A modified, parallelized version of Brenner's potential was used to model interatomic forces within each molecule. A Leonard-Jones 6-12 potential was used for forces between molecules. One gear was powered by forcing the atoms near the end of the buckytube to rotate, and a second gear was allowed.to rotate by keeping the atoms near the end of its buckytube on a cylinder. The meshing aromatic gear teeth transfer angular momentum from the powered gear to the driven gear. A number of gear and gear/shaft configurations were simulated. Cases in vacuum and with an inert atmosphere were examined. In an extension to molecular dynamics technology, some simulations used a thermostat on the atmosphere while the hydrocarbon gear's temperature was allowed to fluctuate. This models cooling the gears with an atmosphere. Results suggest that these gears can operate at up to 50-100 gigahertz in a vacuum or inert atmosphere at room temperature. The failure mode involves tooth slip, not bond breaking, so failed gears can be returned to operation by lowering temperature and/or rotation rate. Videos and atomic trajectory files in xyz format are presented.

Han, Jie↗
NASA NTRS1970

The Varestraint test for refractory metals, task 2

The principles of the Varestraint test were applied to the evaluation of refractory metal alloys. This required development of a special test apparatus employing a modest specimen size for improved economy and compatible with the high purity inert atmosphere required for welding these alloys. Minimum specimen size is desirable because of the high cost of these alloys and also to permit timely testing of limited production developmental alloys. The Varestraint apparatus satisfies these requirements by providing a timely and economic test for hot crack sensitivity. This test can be used both for alloy development and production surveillance. The test apparatus was designed for use in vacuum purged dry boxes and is completely compatible with high purity inert atmosphere. Augmented strain can be varied continuously from 1/4% thru 4%. In addition to varying the augmented strain, the primary Varestraint variable, the effect on hot cracking of varying other weld parameters such as unit weld length heat input have also been studied. Test reproducibility, in terms of bending or strain rate, was demonstrated using high speed photography.

Lessmann, G. G.↗