SEARCH · Engineering Papers

Results for “hydrometallurgical recycling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Unraveling the nature of sulfide ions in hydrometallurgical recycling of NCM622 cathode material

The use of lithium-ion batteries (LIBs) has increased dramatically since its initial inception in the late 20th century. Such a surge in the LIB market and industry has resulted in a huge demand for mineral resources. Besides, the large scale of production will lead to massive amounts of waste batteries in the end. As such, recycling is seen as an end-of-pipe process to resolve sustainability and environmental concerns. The hydrometallurgical recycling is considered to be the most prominent method to recover cathode materials from spent LIBs owing to its high leaching efficiency and low energy costs. A series of procedures including pretreatment of the spent LIBs, acid leaching of the black mass, chemical co-precipitation of the hydroxide precursor, and sintering of the cathode active material need to be operated precisely. In this aspect, the impurities introduced during the process could pose a serious threat to the reaction stability as well as recycling consistency. Here, the impact of sulfide ions on recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode material with the method of hydrometallurgy is first investigated in detail. This study shows that hydrometallurgical process is not obviously influenced by sulfide impurity. No signs of secondary phase or impurity inclusion are spotted in synthesized cathodes. Under 5 at % sulfide concentration conditions, the obtained NCM622 cathode exhibits a capacity of 159.4 mAh/g after 100 cycles at 1/3C, which is at the same level as virgin benchmark. The difference in rate performance between cathodes with and without additional sulfide is less than 2 % or even smaller. In short, the results indicate a neutral status of sulfide ions in hydrometallurgical recycling.

25 ENERGY STORAGE↗

DOE OSTI2025

Hydrometallurgical Recycling of Black Mass of Spent Lithium-Ion Batteries Using Methanesulfonic Acid: Leaching, Kinetic Studies, and Potential for Total Recovery of Valuable Components

Methanesulfonic acid (MSA) exhibits several advantageous properties rendering it a promising candidate for circular hydrometallurgical processes. These properties include a high acidity (pKa = - 1.9) comparable to that of classical mineral acids as well as biodegradability, high stability, and high solubility of metal-MSA complexes in aqueous solutions. In this study, MSA was employed as a lixiviant for the leaching of metals (lithium, nickel, cobalt, and manganese) from the black mass of spent lithium-ion batteries (LIBs). The effect of various parameters, including MSA concentration, H 2 O 2 concentration, temperature, and pulp density, was systematically investigated. Under the optimized conditions (1.5 M MSA, 0.2 M H 2 O 2 , 60 °C, and 50 g/L pulp density), quantitative leaching of lithium was achieved within 30 min, while for nickel and cobalt it was after 2 h, and 4 h for manganese leaching. The leaching kinetics of Li, Ni, Co, and Mn were studies using the shrinking particle models (SPM) and the Avrami model. The results indicated that the Avrami model provided the best fit to the kinetic data, with apparent activation energies of 46.81 kJ/mol for Li, 58.61 kJ/mol for Ni, 59.69 kJ/mol for Co, and 58.86 kJ/mol for Mn, within the temperature range of 25-70 °C (except for Li, which was analyzed in the range of 25-60 °C), consistent with chemical reaction control. Subsequently, residual contaminants in the leaching residue were eliminated through pyrolysis. The quantitative leaching of metals in MSA solution (a green lixiviant), combined with the pyrolytic treatment of leaching residues, represents a circular strategy for the total recovery of valuable components from the black mass of spent LIBs.

25 ENERGY STORAGE↗

DOE OSTI2023

Efficient separation and coprecipitation for simplified cathode recycling

Hydrometallurgical recycling of spent lithium-ion batteries is among the most promising recovery approaches. The current hydrometallurgical method for battery recycling faces challenges such as complex separation and precipitation processes, and environmental concerns from the use of caustic inorganic acid and hazardous hydrogen peroxide. Our proposed modified method, namely polyol-metallurgy, uses citric acid in ethylene glycol as dual-function green solution to overcome these obstacles. This bifunctional solution leaches valuable metal ions from cathode materials (e.g., LiCoO 2 ), and then acts as chelating agents to selectively precipitate cobalt through an esterification reaction, without the need for additional precipitation agents. The leaching efficiency of cobalt and lithium reaches 99.55% and 97.65%, respectively, and more than 96% of cobalt could be directly self-precipitated and recovered. Further, the unique characteristics of the dual-function solution also avoids impurities from Al foils and PVDF/carbon black films, enabling the simple separation process. Therefore, the process can be completed in one-pot system with efficient leaching, separation and coprecipitation, making it more efficient and feasible for operation than existing alternatives.

25 ENERGY STORAGE↗

DOE OSTI2025

Impacts of Lanthanum Impurities on Nickel-Rich Cathode Materials

The widespread use of lithium-ion batteries (LIBs) has led to environmental concerns and exacerbated the scarcity of essential minerals, underscoring the urgent need for effective recycling strategies. Among various recycling methods, the hydrometallurgical process is distinguished by its energy efficiency and minimal environmental impact. Nickel-metal hydride (Ni-MH) batteries are a significant source of nickel sulfate (NiSO 4 ) for hydrometallurgical recycling due to their substantial nickel content. A significant challenge arises from the effective separation of lanthanum (La), which results in at least 20 ppm of La being present in the recycled NiSO 4 . This study explores a critical aspect of the recycling process: the impact of La 3+ impurities, introduced through recycled NiSO 4 , on the performance of the synthesized nickel-rich cathode materials. We conducted a thorough investigation into how La 3+ influences morphology and structural integrity during both the synthesis of precursors and the production of cathode materials. Our findings indicate that La 3+ impurities do not adversely affect the morphology or structural integrity of the cathode precursors relative to virgin materials. However, higher concentrations of La 3+ reduce the discharge capacity with enhanced cycle stability by minimizing cation mixing between lithium (Li + ) and nickel (Ni 2+ ) ions within the cathode. Furthermore, this stability is crucial for extending battery life. Therefore, controlling the concentration of La 3+ impurities is essential for optimizing the electrochemical performance of recycled cathode materials.

Corrosion↗

DOE OSTI2021

Positive Role of Fluorine Impurity in Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials

Lithium-ion battery (LIB) recycling is considered as an important component to enable industry sustainability. A massive number of LIBs in portable electronics, electric vehicles, and grid storage will eventually end up as wastes, leading to serious economic and environmental problems. Hence, tremendous efforts have been made to improve the hydrometallurgical recycling process because it is the most promising option for handling end-of-life LIBs owing to its wide applicability, low cost, and high productivity. Despite these advantages, some extra elements (Al, Fe, C, F, and so forth) remain as impurities in the removal process and are retained in the solution, which is a great challenge to obtain high-quality cathode materials. In this work, the impacts caused by fluorine impurity on the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode are intensively investigated via hydrometallurgical coprecipitation for the first time. Our results show that up to 1 at. % fluorine impurity brings a positive influence on the recovered material due to a higher Ni 2+ ratio on the surface of cathode particles. In addition, the presence of fluoride ions during coprecipitation could lead to the formation of holes in cathode particles, which improves the rate capability and cyclability dramatically. Compared to the virgin material, the capacity of the NCM622 material with 0.2 at. % fluorine impurity is boosted by ~8% (167.7 mA h/g) with a remarkable capacity retention of 98.0% after 100 cycles at 0.33 C. Besides, the cathode with 0.2 at. % fluorine impurity shows a far better rate performance, especially at high rates (~7% increased at 5 C) than that of virgin. Furthermore, these results convince that a low concentration of fluorine impurity is desirable in the hydrometallurgical recycling process. More importantly, this study offers implications in the design of high-performance NCM622 cathode materials via coprecipitation production with ion doping in the near future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

The Effects of Phosphate Impurity on Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Material via a Hydrometallurgy Method

From portable electronics to electric vehicles, lithium-ion batteries have been deeply integrated into our daily life and industrial fields for a few decades. The booming field of battery manufacturing could lead to shortages in resources and massive accumulation of battery waste, hindering sustainable development. Therefore, hydrometallurgy-based approaches have been widely used in industrial recycling to recover cathode materials due to their high efficiency and throughput. Further, impurities have always been a great challenge for hydrometallurgical recycling, introducing challenges to maintain the consistency of product quality because of potential unintended effects caused by impurities. Herein, after comprehensive investigation, we first report the impacts of phosphate impurity on a recycled LiNi 0.6 Co 0.2 Mn 0.2 O 2 ("NCM622") cathode via a hydrometallurgy method. We demonstrate that a passivation layer of Li 3 PO 4 is formed at grain boundaries during sintering, which significantly raises the activation barrier and hinders lithium diffusion. In addition, the distinct degradation of cathode electrochemical properties is observed from poor particle morphology and high cation mixing as a result of phosphate impurity. Cathode powders with 1 at. % phosphate impurity retain a capacity of 146 mAh/g after 100 cycles at 0.33C, 6% less than that of a virgin cathode. Furthermore, cathodes with higher phosphate concentrations perform even worse in electrochemical tests. Therefore, phosphate impurities are detrimental to the hydrometallurgical recycling of NCM cathode materials and need to be excluded from the recycling process.

25 ENERGY STORAGE↗

DOE OSTI2025

Upcycling Mixed Spent Ni-Lean Cathodes into Ni-Rich Polycrystalline Cathodes

Sustainable battery recycling is vital for conserving resources and reducing environmental impacts. Current open- and closed-loop recycling strategies often focus on recovering individual components, making the reuse of mixed cathode materials a complex challenge. Meanwhile, the research on upcycling has been limited to using pristine cathode feedstocks and virgin materials for synthesis. Here, to address this issue, we present an upcycling approach for spent Ni-lean mixed cathode materials that integrate an upcycling hydrometallurgical recycling process with traditional hydrometallurgical methods. This strategy achieves a utilization of 92.31 mol % of recycled materials, enabling the regeneration of Ni-rich cathode materials while significantly reducing the reliance on virgin resources. The regenerated 83Ni cathode materials demonstrate physical properties comparable to those produced from virgin materials. Electrochemical evaluations using single-layer pouch cells show that both recycled and virgin cathodes exhibit initial specific capacity close to 201.1 mAh/g and maintain approximately 88 % capacity retention after 500 cycles. Additionally, 2Ah cells confirmed these findings, delivering 85 % capacity retention after about 900 cycles. Techno-economic analysis demonstrates notable environmental benefits, including reductions in greenhouse gas emissions and energy consumption, achieving 232.75 MJ/kg of product, which is 8.6 % lower than traditional methods and comparable to direct upcycling. Furthermore, the upcycling hydrometallurgical recycling process generates the highest profit, proving its economic viability. This scalable and versatile process is adaptable to varying transition metal compositions, facilitating a closed-loop recycling system that bridges mixed spent cathodes with next-generation cathode materials, and offers a sustainable solution for managing waste battery materials.

Hydrometallurgical recycling↗

DOE OSTI2021

Unveiling the Influence of Carbon Impurity on Recovered NCM622 Cathode Material

With the proliferation of market demand for lithium-ion batteries (LIBs) over the past decades, battery recycling has aroused extensive attention due to the environmental, supply, and economic issues caused by waste batteries. Here, the hydrometallurgical recycling method has been widely adopted to recover cathode materials as a result of its wide applicability and high productivity. However, it is hard to completely eliminate impurities such as copper, aluminum, and carbon, which could bring significant impacts on recovered materials. Here, the influence of the carbon impurity on recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode material is systematically investigated. It shows that the carbon impurity promotes nucleation during coprecipitation and forms holes in the cathode secondary particles after sintering which could enhance cyclability of the NCM622 cathode. The cathode with 0.2 atom % of carbon impurity displays the highest capacity of 159.9 mAh/g with a striking capacity retention rate of 97.9% after 100 cycles at 0.33C, but performs worse at high rates. Nonetheless, excess carbon (5 atom %) results in severe cation disorder and lattice distortion which significantly deteriorates the electrochemical properties of the NCM622 cathode. Therefore, it is important to strictly control carbon impurity during the recycling process for spent LIBs.

25 ENERGY STORAGE↗

DOE OSTI2021

Effects of Lithium-ion Battery Recycling Wastes on Ammonia-Oxidizing Bacteria

Increased demand for lithium-ion batteries (LIB) necessitates development of effective recycling methods for critical battery materials. Oak Ridge National Laboratory (ORNL) is exploring membrane solvent extraction (MSX) for the hydrometallurgical recycling of LIB materials. In this study, waste from MSX was investigated for its impact on the ammonia-oxidizing organism, Nitrosomonas europaea—a model organism for nitrogen removal during wastewater treatment. It was found that Raffinate 4 from ORNL was inhibitory to the growth and nitrite production of N. europaea, likely due to its nickel content. Further investigation is currently underway.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2022

Value-creating upcycling of retired electric vehicle battery cathodes

The electrification revolution in the automobile and other industries demands annual production capacity of batteries of at least 10 2 GWh, which presents a twofold challenge: supply of key materials such as cobalt and nickel and recycling when batteries are retired from use. Pyrometallurgical and hydrometallurgical recycling are currently used in industry but suffer from complexity, high costs, and secondary pollution. Here we report a molten-salt-based method for direct recycling (MSDR) that is environmentally benign and creates value on the basis of a techno-economic analysis using real-world data and price information. We also experimentally demonstrate the feasibility of MSDR by upcycling a low-nickel polycrystalline LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC) cathode material into Ni-rich (Ni > 65%) single-crystal NMCs with increased energy density (>10% increase) and outstanding electrochemical performance (>94% capacity retention after 500 cycles). This work may open opportunities for closed-loop recycling of electric vehicle batteries and manufacturing of next-generation NMC cathode materials.

25 ENERGY STORAGE↗

DOE OSTI2024

Recycled graphite enabled superior performance for lithium ion batteries

Recycling graphite attracts growing attention since cumulative amount of spent Li-ion batteries and the shortage of graphite supply chain. Although various recycling methods have been reported, the recycled graphite cannot reach the strict commercial standards of purity, scalability, efficiency, and capacity, preventing it from battery manufacturing. Herein, the important roles of defects and functional groups on the graphite surface are deeply studied, and a closed-loop graphite recycling process with the surface recovery and modification for the graphite from the end-of-life batteries is demonstrated. The recovered graphite delivers a purity of over 99.9 % and an average initial coulombic efficiency of 91.5 %. Compared with commercial graphite in industrial standard battery testing parameters, full cells with recovered graphite possess enhanced rate reversibility, doubled cycle life, over 10 % higher capacity along with half anode material cost. In conclusion, these impressive results not only underscore the transformative potential of surface reconstruction and modification in graphite recycling, but also present economic feasibility and sustainable pathway for significantly improving battery performance and addressing global resource challenges via integration with the hydrometallurgical recycling process.

25 ENERGY STORAGE↗

DOE OSTI2022

Optimising the geospatial configuration of a future lithium ion battery recycling industry in the transition to electric vehicles and a circular economy

Rapid electrification of the transport system will generate substantial volumes of Lithium-ion-battery (LiB) waste as batteries reach their end-of-life. Much attention focuses on the recycling processes, neglecting a broader systemic view that considers the concentration of the costs and impacts associated with logistics and transportation. This paper provides an economic, environmental and geospatial analysis of a future LiB recycling industry in the UK. Hitherto, state-of-the-art assessment methods have evaluated life cycle impacts and costs but have not considered the geographical layer of the problem. This paper develops a GSC derived supply chain model for the UK electric vehicle and end-of-life vehicle battery industry. Considering both pyrometallurgical and hydrometallurgical recycling technologies, the optimisation process takes into account anticipated EV volumes, and, based on anticipated near-term technological evolution of LiBs, the evolution of the mix of battery cathodes in production, and presents a number of scenarios to show where LiB recycling facilities should ideally be geographically located. An economic and environmental assessment based on a customised EverBatt model is provided.

25 ENERGY STORAGE↗

DOE OSTI2021

Valence Effects of Fe Impurity for Recovered LiNi 0.6 Co 0.2 Mn 0.2 O 2 Cathode Materials

Iron impurities are generally included in the obtained leaching liquor solution during the hydrometallurgical recycling method of spent lithium-ion batteries (LIBs) due to the usage of iron in battery casings and machinery parts of recycling equipment, which would definitely affect the physical and electrochemical features of the recovered active materials. In this paper, the effects of iron impurity with different valence states (Fe 2+ and Fe 3+ ) and gradient concentrations (0.2, 1.0, and 5.0 at. %) for the obtained LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathodes are fully studied. It is found that Fe3+ impurity could easily lower the tap density and average size of NCM622 particles and even introduce some impurity phases in the NCM622 structure at high concentration (5.0 at. %), leading to much lower specific capacity, worse rate capability, and cycling performance of the Fe 3+ -based NCM622 cathode. On contrast, with certain concentrations of Fe 2+ impurity (0.2 and 1.0 at. %), the NCM622 cathode material exhibits comparable and much better electrochemical properties compared with the virgin NCM622 materials. Based on these results, the valence of Fe impurity should be considered and controlled as well as its concentration during the recycling process design for spent LIBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Techno-Economic Impact of a Smart Battery Sorting System

Create analytical framework to capture costs and benefits of the automated sorting into battery recycling including the development and deployment of various types of battery recycling technologies such as pyrometallurgical, hydrometallurgical, and direct recycling. Li Industries, Inc. is a Virginia startup company focused on reinventing how lithium-ion batteries (LIBs) are recycled. Li Industries is focused on developing direct LIB recycling and automated battery sorting technologies in order to reduce the environmental impact of the LIB lifecycle. This work is to be conducted in support of the American-Made Challenges Lithium-Ion Battery Recycling Prize. Li Industries and NREL will work together to understand how novel technologies, such as those being developed by Li Industries, can impact the development and economics of the battery recycling industry. This voucher is being used to evaluate the profitability of an automated sorting system developed by Li Industries and the potential effect this increased value could have on the domestic lithium-ion battery (LIB) recycling industries in the United States. NREL has developed the Lithium-Ion Battery Resources Assessment (LIBRA) system dynamics model to project the future viability of the US LIB manufacturing and recycling industries under varying technoeconomic conditions and battery adoption scenarios over the coming decades. Additional logic was added to LIBRA to analyze the role automated sorting of recycling feedstock could play in the buildout of the industry and the impacts it has on the recovery of end-of-life (EOL) battery materials. This report summarizes the outcomes of this modeling analysis in the US context through a series of sensitivity analyses run for a range of values of a given input dimension and compared across the unsorted or automated sorting cases for LIB recycling feedstock. For greater detail on the process and analysis, the researchers are publishing a forthcoming journal article titled Techno-Economic Impact of a Smart Battery Sorting System for Lithium-Ion Battery Recycling and Mineral Recovery in the United States by Weigl, et al. In the event the article is not accepted by any currently seeking publication in academic or industry journal, it may be published by NREL. CRADA benefit to DOE, Participant, and US Taxpayer: assists laboratory in achieving programmatic scope competencies, uses the laboratory's core competencies.

25 ENERGY STORAGE↗

DOE OSTI2025

Battery‐Grade Lithium Materials: Virgin Production and Recycling, a Techno‐Economic Comparison

Lithium has been identified as an essential mineral to the economic and national security of the United States. It is vital for rechargeable batteries that surround us daily from the personal electronics to large-scale energy storage. With a comprehensive techno-economic analysis, the cost of battery-grade lithium compounds production, i.e., lithium carbonate (LC) is evaluated and lithium hydroxide monohydrate (LHM), from both virgin (spodumene ore and brine) and recycled feedstocks (spent lithium-ion batteries). The goal of this study is to inform about the economics of lithium compounds production with comprehensive insights into differences in manufacturing routes and pave a pathway to explore more innovative, domestic manufacturing processes in future for their cost competitiveness and environmental impact. The study includes details on mining and extraction operations as well as unit level operation in the refining process. Moreover, process level information has been collected for pyrometallurgical and hydrometallurgical battery recycling routes. This analysis shows that brine and direct lithium extraction are the cheapest pathways to produce LC or LHM (between $\$3.39$ and 6.20 kg −1 ). The cost of production in the ore and recycling routes can range between $\$4.17$ and $\$53.41$ kg −1 and is highly depending on capital equipment investment, plant location, and the price of spodumene concentrate SC6.0.

battery recycling↗

DOE OSTI2026

Interfacial Chemistry Involved in Selective Separation of NMC/LMO and LCO/LMO Binary Cathode Materials by Froth Flotation Using Oleic Acid

The variability in cathode compositions within recycled lithium-ion battery (LIB) feedstocks poses a significant challenge to efficient downstream refining processes. This study demonstrates the feasibility of using froth flotation with oleic acid as a collector to selectively separate lithium nickel-manganese-cobalt oxide (NMC) and lithium cobalt oxide (LCO) from lithium manganese oxide (LMO) materials. Laboratory-scale flotation tests achieved an 80% separation efficiency in a single stage, producing a froth product with >90% purity of NMC/LCO at approximately 90% yield. Concurrently, the LMO materials were enriched in the sink product with ∼90% purity and ∼90% yield. This approach was further validated using recycled cathode materials, confirming its applicability to realistic feedstocks. The underlying mechanism governing the selective separation of NMC/LCO from LMO was investigated using ζ-potential measurements, contact angle measurements, bubble-particle attachment experiments, and X-ray photoelectron spectroscopy (XPS) analysis. Both contact angle and bubble-particle attachment results confirmed that oleic acid adsorption rendered NMC and LCO surfaces hydrophobic, thereby enhancing flotation recovery. At pH 5, oleic acid adsorbed preferentially onto NMC and LCO surfaces via electrostatic interactions, while exhibiting minimal adsorption on LMO surfaces. However, separation efficiency deteriorated at higher pH, which was attributed to the co-flotation of LMO materials caused by oleate chemisorption on MnOH + species. This work establishes froth flotation as a viable cathode/cathode separation strategy, providing a low-cost, scalable pathway to preconcentrate and enrich nickel-rich and cobalt-rich cathode active materials from incompatible cathode chemistries for direct recycling or hydrometallurgical processing. Furthermore, this study reveals, for the first time, the mechanism of oleate adsorption on the surface of different cathode materials.

PH↗

DOE OSTI2020

Systematic Study of Al Impurity for NCM622 Cathode Materials

Many recycling processes have been developed for spent Li-ion batteries (LIBs), such as pyrometallurgy, hydrometallurgy, and direct recycling. For all the recycling methods, however, impurities are always introduced from the current collectors or casing materials, especially aluminum (Al), which might lead to negative effects on recovered electrode materials. Therefore, it is significant to determine the impacts of Al impurity on recovered materials. Here, the influence of the Al impurity for the synthesized LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) precursor and cathode is systematically studied. The cell with 0.2 at % Al impurity displays the highest reversible capacities (145.2, 130.5, and 100.3 mAh g -1 from 2, 3, and 5 C, respectively) and striking cycling capability at 2 C after 100 cycles with the highest retention capacity of 138.5 mAh g -1 . Meanwhile, the excess Al ions (5 at %) lead to the Li/Mn superlattice structure and deteriorate electrochemical performance of the synthesized NCM622 cathode.

25 ENERGY STORAGE↗

DOE OSTI2024

Impact of Silicon Impurity on the Hydrometallurgical Recovery of NCM622 Cathode

Hydrometallurgy is one of the best approaches to date for recycling LIBs due to its high efficiency, low energy usage, and industrial scalability. However, impurities have always been a thorny issue because they could have unintended impacts on the recovered cathode materials. This research marks the first systematic investigation into the influence of silicon impurity on the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode obtained from hydrometallurgical recycling. Here we find that silicon nanoparticles will be nucleated at the center of the precursor particles during co-precipitation synthesis, and the silicon core will slowly dissolve in the surrounding ammonia, creating a special hollow structure in the particle. More importantly, the dissolution of silicon impurity will eventually lead to the deposition of silicates in the cathode material, which is an unfavorable result. Test data indicate that NCM622 cathode with 5 at% silicon has a capacity of 148.8 mAh g −1 after 100 cycles at 1/3 C, approximately 10 mAh g −1 lower than the virgin. Despite being relatively mild, the adverse influence of silicon impurity in hydrometallurgical recycling still requires attention.

25 ENERGY STORAGE↗