Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “high explosives, simulations, modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Verification of a specialized hydrodynamic simulation code for modeling deflagration and detonation of high explosives

A specialized hydrodynamic simulation code has been developed and verified for the simulation of one-dimensional unsteady problems involving the detonation and deflagration of high explosives. To model all the relevant physical processes in these problems, a code is required to simulate compressible hydrodynamics, unsteady thermal conduction, and chemical reactions with complex rate laws. Several verification exercises are presented which test the implementation of these capabilities. The code also requires models for physics processes such as equations of state and conductivity for pure materials and mixtures as well as rate laws for chemical reactions. Additional verification tests are required to ensure that these models are implemented correctly. Though this code is limited in the types of problems it can simulate, its computationally efficient formulation allows it to be used in calibration studies for reactive burn models for high explosives. Furthermore, this study demonstrates how a series of verification tests can be used to ensure that the various physics processes needed to simulate complex phenomenon can be tested to ensure that they are correctly implemented.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

LLNL Macroscopic Anisotropic Explosives Research at INL National Security Test Range - Test Results

A select team of 23 engineers, scientists, and explosives specialists from LLNL, LANL, INL, and Marine Raiders from Marine Special Operations Command (MARSOC) and U.S. Special Operations Command (SOCOM) assembled during the second week of November at the INL National Security Test Range near Idaho Falls to investigate and demonstrate fundamental principles of explosives anisotropy. Today's explosives are isotropic in their detonation performance. That is, no matter what direction a detonation runs through bulk explosive, the performance is the same; whereas, anisotropic explosives exhibit different performance, depending on which direction the detonation wave moves through the explosive. The ANISO Team worked in subfreezing temperatures on the Snake River Plain, carrying out 55 experimental explosives shots in four days that lead to a clear understanding of the performance and behavior of an assembly of small, linerless, C4 shaped charges. These shots clearly demonstrated, for the first time, on a macroscopic scale, the principle of anisotropy in measured progression of the detonation through the explosive assembly. The outputs of nine piezo timing pins in the explosive assembly clearly showed detonation progressing through the assembly faster than nominal detonation velocity and moving slower than nominal detonation velocity in the opposite direction. Basic data from these experiments will be used to design and construct explosives assemblies that will be shot in the LLNL High Explosives Applications Facility's (HEAF). These experimental tests will provide refined basic data that will then be used by modelers to develop high explosives models. Computer simulations using these models will then be run to predict performance and design inhomogeneous, anisotropic bulk explosive charges that will be tested at LLNL.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Modeling detonation with CartaBlanca simulations

The accurate modeling of high explosive (HE) detonation and the con- sequent large solid deformation, failure, plastic flow, porosity growth, and shock wave propagation is important because simulations can capture spatial and temporal features that experimental diagnostics cannot capture. However, the simulation of the explosive event poses challenges to a computational scientist. These include the accurate modeling of ductile damage, crack formation, plastic deformation, as well as physical and nu- merical instabilities. The material response can be history-dependent and subject to large material deformation. Our research simulates the impact of a high explosive (Detasheet) onto a tantulum metal plate. We performed the simulations using CartaBlanca at different mesh resolutions. We decided the study would be impactful if we perform the simulations with the Material Point Method. Differences were observed at the different mesh resolutions in velocity and nodal stress magnitude, so increased mesh resolutions may be required. In addition, the Discontinuous Galerkin method would be needed to account for the large gas expansion.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

The high explosives & affected targets (HEAT) dataset

Artificial Intelligence (AI) surrogate models offer a computationally efficient alternative to full-physics simulations, yet no existing datasets are publicly available for training, testing, and validation of machine learning models of the dynamics of high-explosive driven shocks through multiple materials. Shock propagation through materials is a computationally challenging problem because simulations must include material-specific equations of state (EOS) along with descriptions of other physical processes such as plastic deformation, phase change, damage processes, fluid instabilities, and multi-material interactions. Shocks are typically initiated by high-velocity impacts or explosive loading. The latter case necessitates the addition of models of reactive materials to represent high-explosive (HE) detonation. Here, to address the lack of an expansive dataset for multi-material shock propagation in the AI/ML community, we present the High-Explosives and Affected Targets (HEAT) Dataset. HEAT is a physics-rich collection of two-dimensional, cylindrically symmetric, simulations generated using an Eulerian, multi-material, shock-propagation code developed at Los Alamos National Laboratory. The dataset includes two partitions: (1) the expanding shock-cylinder (CYL) simulations, Figs. 1, and (2) the Perturbed Layered Interface (PLI) simulations, Fig. 2. Entries in both partitions consist of time series of arrays of thermodynamic fields (pressure, density, and temperature), kinematic fields (position and velocity), and additional fields that depend on thermodynamic and/or kinematic fields (e.g., material stress). Materials in the CYL partition include solids (aluminium, copper, depleted uranium, stainless steel, tantalum, and a generic polymer), a liquid (water), gases (air, nitrogen), and a generic detonating material (high explosive, HE). The PLI partition spans a highly varying geometry but consists of fixed materials across entries: Copper, aluminium, stainless steel, generic polymer, and generic HE. HEAT captures critical phenomena such as momentum transfer, shock propagation, plastic deformation, and thermal effects, making HEAT a valuable benchmark for development of AI/ML emulation of multi-material shock propagation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Towards Robust Calibration of the AWSD Reactive Burn Model

Calibration of a reactive burn model for detonation of high explosive is an important step towards predictive hy drodynamic simulations of detonation. A typical calibration consists of varying model parameters (e.g., rate constants, activation energies) until results of hydrodynamic simulations match the experimental data for a certain set of ex periments. Hydrodynamic simulations of the dependence of steady detonation velocity on the radius of a cylindrical high-explosive charge - often used in such calibrations - can be computationally expensive. In this work, we propose a method where such expensive simulations are performed infrequently, and only to parameterize and refine a surrogate model for the dependence of the detonation velocity on calibrated parameters. The method is developed, implemented and applied to an example problem - calibration of the AWSD reactive burn model for important high explosive PBX 9502. Two different flavors of the surrogate model are investigated, and the calibration is performed successfully.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

All-Atom Simulation of 3D Hot Spot Formation in Shocked TATB Explosive

TATB is an insensitive high explosive (IHE) critical to the stockpile that is challenging to model at the continuum scale. Advanced detonation models in the Cheetah high explosive chemistry code require validation though subscale simulations. High explosive initiation is determined by micron-scale physics of hot spots formed a shock-collapsed pores. Pore sizes between 100 nm and 1 μm are believed to be the most important for determining the shock sensitivity of TATB. This range of pore sizes is difficult to access at the atomic scale through allatom molecular dynamics (MD) simulations, even with Sierra-class computers. Quasi-2D simulations are widely used and allow much larger pore sizes (up to 400 nm) to be studied, but the applicability of 2D simulations to the actual 3D pore response is not understood. Resolving these uncertainties through “full physics” MD modeling is key for generalizing, parameterizing, and validating the kinds of continuum models used to inform design, safety, and performance. This work was a continuation of FY20 efforts pushing simulations to full 3D with the largest-ever all-atom simulations of an explosive. These were the first all-atom full-3D simulations of large hot spots thought to govern explosive detonation and required over a billion atoms. Simulations were performed using LAMMPS, an open SNL science code. MD explosive models present unique challenges, even for established codes such as LAMMPS. Their model forms are more complex than typical models for metals, while simulating high temperature-pressure conditions is demanding and increases computational cost. Scaling problems in GPU-enabled MD algorithms initially limited simulations to <100 million atoms but were resolved through collaboration with SNL. An overall 24x speedup was obtained relative to CPU machines. Specialized analysis of these simulations required a bottom-up refactoring and algorithm parallelization of in-house codes and application of computer vision algorithms to extract meaningful information.

36 MATERIALS SCIENCE↗
DOE OSTI2022

LLNL Macroscopic Anisotropic Explosives Research At INL National Security Test Range: Shot Narrative

This series of experiments is exploring new frontiers in explosives science, technology, and engineering. The extensive list of experiment shots is necessary to sort out what works and what does not work in searching for an environment that supports anisotropic detonation properties in explosives. These experiments have been designed to serve as an economical and efficient first-cut determination as to whether there is any validity to an explosive analog to a series circuit of electrical diodes. That is, the detonation moves more easily in the “forward” direction than the “backward” direction. The basic data gleaned from these experiments will be used to design experiments that will be shot in the 10 kg tank at the High Explosives Application Facility (HEAF) at the Lawrence Livermore National Laboratory. In turn, those shots that will be heavy in diagostics and instrumentation, providing basic data that will be used by simulation code developers in creating high explosive models that account for air gap and oblique explosive surfaces undergoing sympathetic detonation.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Calibrating a finite-strain phase-field model of fracture for bonded granular materials with uncertainty quantification

To study the mechanical behavior of mock high explosives, an experimental and simulation program was developed to calibrate, with quantified uncertainty, a material model of the bonded granular material Idoxuridine and nitroplasticized Estane-5703. This paper reports on the efficacy of such a framework as a generalizable methodology for calibrating material models against experimental data with uncertainty quantification. Additionally, this paper studies the effect of two manufacturing temperatures and three initial granular configurations on the unconfined compressive behavior of the resulting bonded granular materials. In each of these cases, the same calibration framework was used; in that, hundreds of high-fidelity direct numerical simulations using a new, graphics processing unit-enabled, high-performance finite element method software, Ratel, were run to calibrate a finite-strain phase-field fracture model against experimental data. It was found that manufacturing temperature influenced the elastic response of the mock high explosives, with higher temperatures yielding a stiffer response. By contrast, it was found that the initial configuration of the grains had a negligible impact on the overall behavior of the mock high explosives though it remains possible that local damage accumulation within the specimens could be altered by the initial configurations. Overall, the calibration framework was successful at creating well-calibrated models, showing its usefulness as an engineering and scientific tool.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling particulate generation during high energy explosive events

Laser produced plasmas are used to simulate high energy events and are useful for a variety of applications e.g. in industrial sectors, such as semi-conductor manufacturing, as well as medical, environmental, and energy sectors. Particulate generation in laser produced plasmas is related to key features of the plasma: temperature and pressure evolution during plume expansion, plasma chemistry etc. Several uncertainties persist in relating initial high energy events (~microseconds) to particulate formation that happens as the plasma cools and evolves (~milliseconds).

42 ENGINEERING↗
DOE OSTI2025

Uncertainty Quantification Enabled by Automatic Differentiation for Hydrodynamic Simulation of Shock‐to‐Detonation Transition in High Explosives

Quantifying the effects of uncertainty in a reactive burn model on the run-to-detonation time in high explosives (HEs) provides a robust methodology for assessing the probability of an HE failing the IHE qualification standard. Moreover, uncertainty quantification helps evaluate whether the model calibration accurately represents data outside the calibration set. This study uses a specialized hydrodynamic simulation code for modeling detonation to determine the run-to-detonation time of the HE PBX 9502 for various impact velocities. To quickly approximate uncertainties in the model, a surrogate was constructed using a Taylor series expansion centered at the mean of the input parameters. To obtain the sensitivities required for constructing the Taylor series, HYP-percomplex Automatic Differentiation (HYPAD) was implemented. HYPAD is a methodology for infusing existing codes with automatic differentiation capabilities by augmenting variables with one or more imaginary units to compute step-size independent partial derivatives. These derivatives are accurate to machine precision with respect to the implemented numerical algorithm, meaning their accuracy reflects that of the underlying method (e.g., integration or discretization schemes). Using reduced order modeling techniques, the mean and standard deviation of the run-to-detonation time of a shock within PBX 9502 were computed for a number of initial impact velocities. A weighted least squares regression was then performed to obtain a best fit curve and prediction interval for the computed statistics. Historical data points from explosively driven wedge tests were utilized to validate the prediction interval, ensuring its reliability in predicting future outcomes. With this prediction interval and a known safety constraint curve, the most probable point of failure and the probability of failure for the HE PBX 9502 were determined.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

GnarlyX: Eulerian multi-material hydrodynamics coupled to equation of state and hyperelastic, plastic constitutive models

GnarlyX is a new hydrocode for direct numerical simulations of the microstructural behavior of high explosives at the mesoscale. We summarize the computational framework for multidimensional, Eulerian multi-material hydrodynamics coupled to EOS and hyperelastic, plastic constitutive models. We present 1D verification tests of multi-material only and combined multimaterial and strength capabilities with comparisons to exact solutions of shock states resulting from an incident shock impacting the material interface of PBX9502 and aluminum. We show that GnarlyX performs well in capturing the resulting shock waves in examining numerical convergence with exact solutions. In later work, we will summarize the thermomechanics and multi-dimensional, parallel computing capabilities in GnarlyX with multi-dimensional verification tests.

42 ENGINEERING↗
DOE OSTI2024

Co-Active Subspace Methods for the Joint Analysis of Adjacent Computer Models

Active subspace (AS) methods are a valuable tool for understanding the relationship between the inputs and outputs of a Physics simulation. In this article, an elegant generalization of the traditional ASM is developed to assess the co-activity of two computer models. This generalization, which we refer to as a Co-Active Subspace (Co-AS) Method, allows for the joint analysis of two or more computer models allowing for thorough exploration of the alignment (or non-alignment) of the respective gradient spaces. We define co-active directions, co-sensitivity indices, and a scalar “concordance” metric (and complementary “discordance” pseudo-metric) and we demonstrate that these are powerful tools for understanding the behavior of a class of computer models, especially when used to supplement traditional AS analysis. Details for efficient estimation of the Co-AS and an accompanying R package (concordance) are provided. Practical application is demonstrated through analyzing a set of simulated rate stick experiments for PBX 9501, a high explosive, offering insights into complex model dynamics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Reformulating a Gurson-based dynamic damage model and demonstrating improved predictive power and numerical robustness

The original Tepla (TEnsile PLAsticity) ductile damage model, based on the Gurson yield surface, has long been used to model damage evolution and material failure under dynamic loading. Unfortunately, Tepla suffered from mesh sensitivity, numerical instability, and limited predictive capability. Here, we theoretically reformulate Tepla to address these issues. We especially focus on the prediction of porosity, which is the key state variable used for modeling ductile damage, as compared to more easily measured surface velocities, which are at best an indirect measure of damage. Key model changes include separating the viscosity during volumetric void growth from underlying shear strength behavior and switching to an iterative bisection solver. The new Tepla is then calibrated on incipient spall experiments on half-hard copper and tantalum, which demonstrate its ability to simultaneously fit the model to recovered porosity distributions and measured surface velocities, a stringent test. Improved numerical behavior, such as greatly reduced mesh sensitivity, is also shown in those simulations. Finally, the new Tepla model is applied to several high-explosive loaded, sweeping wave experiments, showing the ability of the model to predict behavior on tests with significantly different loading conditions and histories than the calibration data.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Core-collapse Supernova Sensitivity Machine (Final Technical Report)

Core-collapse supernovae are vital phenomena for understanding the extreme physics of stellar evolution, nuclear interactions, and the origins of elements in the universe. This project developed high-resolution 3D simulations and innovative 1D turbulence models to study the explosion mechanisms, yielding critical insights into the role of turbulence, magnetohydrodynamics, and neutrino physics. The outcomes include enhanced sensitivity analyses connecting nuclear physics inputs to observable supernovae characteristics, tools for the broader research community, and substantial contributions to the training of future scientists.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Large Eddy Simulations of Turbulent and Buoyant Flows in Urban and Complex Terrain Areas Using the Aeolus Model

Fast and accurate predictions of the flow and transport of materials in urban and complex terrain areas are challenging because of the heterogeneity of buildings and land features of different shapes and sizes connected by canyons and channels, which results in complex patterns of turbulence that can enhance material concentrations in certain regions. To address this challenge, we have developed an efficient three-dimensional computational fluid dynamics (CFD) code called Aeolus that is based on first principles for predicting transport and dispersion of materials in complex terrain and urban areas. The model can be run in a very efficient Reynolds average Navier–Stokes (RANS) mode or a detailed large eddy simulation (LES) mode. The RANS version of Aeolus was previously validated against field data for tracer gas and radiological dispersal releases. As a part of this work, we have validated the Aeolus model in LES mode against two different sets of data: (1) turbulence quantities measured in complex terrain at Askervein Hill; and (2) wind and tracer data from the Joint Urban 2003 field campaign for urban topography. As a third set-up, we have applied Aeolus to simulate cloud rise dynamics for buoyant plumes from high-temperature explosions. For all three cases, Aeolus LES predictions compare well to observations and other models. These results indicate that Aeolus LES can be used to accurately simulate turbulent flow and transport for a wide range of applications and scales.

42 ENGINEERING↗
DOE OSTI2021

Uncertainty Quantification in High Explosives Equations of State [Slides]

In order to fit models to data, we need a way to simulate the data given a model. Our projects involved simulators for the Manganin gauge experiment and for cylinder tests, which we use to calibrate models to experiments. We call the parameters we seek to optimize the degrees of freedom (DOF). We use a Bayesian approach with its associated UQ benefits.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Spatio-Temporal Surrogates for Interaction of a Jet with High Explosives: Part II - Clustering Extremely High-Dimensional Grid-Based Data

Building an accurate surrogate model for the spatio-temporal outputs of a computer simulation is a challenging task. A simple approach to improve the accuracy of the surrogate is to cluster the outputs based on similarity and build a separate surrogate model for each cluster. This clustering is relatively straightforward when the output at each time step is of moderate size. However, when the spatial domain is represented by a large number of grid points, numbering in the millions, the clustering of the data becomes more challenging. In this report, we consider output data from simulations of a jet interacting with high explosives. These data are available on spatial domains of different sizes, at grid points that vary in their spatial coordinates, and in a format that distributes the output across multiple files at each time step of the simulation. We first describe how we bring these data into a consistent format prior to clustering. Borrowing the idea of random projections from data mining, we reduce the dimension of our data by a factor of thousand, making it possible to use the iterative k-means method for clustering. We show how we can use the randomness of both the random projections, and the choice of initial centroids in k-means clustering, to determine the number of clusters in our data set. Our approach makes clustering of extremely high dimensional data tractable, generating meaningful cluster assignments for our problem, despite the approximation introduced in the random projections.

97 MATHEMATICS AND COMPUTING↗