Engineering PapersSearch

SEARCH · Engineering Papers

Results for “green pricing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Comet 81p/Wild 2: The Updated Stardust Coma Dust Fluence Measurement for Smaller (Sub 10-Micrometre) Particles

Micrometre and smaller scale dust within cometary comae can be observed by telescopic remote sensing spectroscopy [1] and the particle size and abundance can be measured by in situ spacecraft impact detectors [2]. Initial interpretation of the samples returned from comet 81P/Wild 2 by the Stardust spacecraft [3] appears to show that very fine dust contributes not only a small fraction of the solid mass, but is also relatively sparse [4], with a low negative power function describing grain size distribution, contrasting with an apparent abundance indicated by the on-board Dust Flux Monitor Instrument (DFMI) [5] operational during the encounter. For particles above 10 m diameter there is good correspondence between results from the DFMI and the particle size inferred from experimental calibration [6] of measured aerogel track and aluminium foil crater dimensions (as seen in Figure 4 of [4]). However, divergence between data-sets becomes apparent at smaller sizes, especially submicrometre, where the returned sample data are based upon location and measurement of tiny craters found by electron microscopy of Al foils. Here effects of detection efficiency tail-off at each search magnification can be seen in the down-scale flattening of each scale component, but are reliably compensated by sensible extrapolation between segments. There is also no evidence of malfunction in the operation of DFMI during passage through the coma (S. Green, personal comm.), so can the two data sets be reconciled?

Price, M. C.

Techno-Economic Analysis of Green Hydrogen Energy Storage in A Cryogenic Flux Capacitor

The Cryogenic Flux Capacitor (CFC) is a cold, dense energy storage core that is being studied in the cryo-compressed, about 300 bar and 80K, region of gaseous hydrogen (GH 2 ) storage and liquid hydrogen (LH 2 ) region near the normal boiling point. Hydrogen storage is improved by physically bonding the molecules within the nanoscale pores of the aerogel composite blanket material. The process of bonding or debonding is governed by principles of physical adsorption (physisorption) and thermodynamics. The large surface area afforded by the nanoporous aerogel (~1,000 m 2 /g) allows its storage performance to easily exceed capacities of high-pressure GH 2 storage for an equivalent volume. With the integrated aerogel, subscale tests have shown that storage is increased by about 36% over a simple tank filled with GH 2 at the same operating temperature and pressure. For LH 2 conditions, the CFC is shown to operate at improved densities, but testing is ongoing. For the techno-economic analysis (TEA), the source of hydrogen is compared between onsite steam methane reforming (SMR) and onsite solar photovoltaic (PV) panels providing power to electrolyzers to produce green GH 2 . The TEA compares pure hydrogen produced at a small scale for a 25 MW power system and at a large scale in a 500 MW power system. The system allowed for hydrogen imports and exports at a set price with a tank sized for 10 hours of power production. The two power producing technologies are a combined cycle gas turbine (CCGT) and hydrogen fuel cells. The SMR system uses natural gas as an input and includes a carbon capture and storage (CCS) system. The levelized cost of electricity (LCOE), levelized cost of hydrogen (LCOH), and levelized cost of storage (LCOS) are developed based on the capital cost and operating cost of the systems. The results are shown for current costs using a 2021 benchmark and DOE projections for cost improvements by 2030. The TEA showed that onsite hydrogen generation from SMR has an LCOH of about 1.4 to 2 USD per kg over the life of the plant and the PV hydrogen production LCOH is about 5.2 to 5.5 USD per kg. The LCOS of conventional GH 2 systems is estimated to be $210/MWh and cost of storage for LH 2 systems is $205/MWh for fuel cell systems and $249/MWh for CCGT systems. CFC improved the LCOS of all these systems to $198/MWh, $191/MWh and $233/MWh respectively. The LCOE also improved with conventional systems between $171/MWh and $228/MWh improved by CFC to between $167/MWh and $212/MWh. Using projections for improvement in costs following DOE’s goals by 2030, green hydrogen improved to as low as $78/MWh LCOS and LCOE for conventional cases. CFC improved over conventional storage with the lowest LCOS being $62/MWh and the lowest LCOE being $73/MWh. These results correspond to an LCOH of $2/kg. Finally, the TEA shows how LCOE is improved for hydrogen conditioning and storage over conventional systems and caverns in the 10 to 50 hour range.

Joshua Schmitt

Diode laser-pumped solid-state lasers

An evaluation is made of the consequences for solid-state lasers of novel diode laser-pumping technology. Diode laser-pumped neodymium lasers have operated at an electrical-to-optical efficiency of 10 percent in a single spatial mode, with linewidths of less than 10 kHz, and with a spectral power brightness sufficiently great to allow frequency extension by harmonic generation in nonlinear crystals; this has yielded green and blue sources of coherent radiation. Q-switched operation with kW peak powers and mode-locked operation with 10-picosec pulse widths have also been demonstrated. All-solid-state lasers at prices comparable to those of current flash-lamp-pumped laser systems are foreseen, as are power levels exceeding 1 kW, for coherent radar, global satellite sensing, and micromachining.

Byer, Robert L.

Additive Manufacture of Refractory Metal Green Propulsion Thrusters

High temperature refractory metals are required for a number of high temperature propulsion applications. Refractory metals are expensive, difficult to manufacture with high buy-to-fly ratios, and few vendors. Additive manufacture (AM) is used to produce C103, Molybdenum (Mo), and Tungsten (W) reaction chamber and thrust stand-off as well as Iridium ultra-fine lattice catalysts for integration into 1 N green propulsion thrusters. After printing components underwent post-processing to include heat treatment, surface finish modification, inspection, integration, and testing. Properly utilized AM overcomes existing manufacture limitations by greatly increasing design flexibility, material options, decrease price, decrease lead-time, and increase the commercial supply base.

Omar Mireles

Irradiation history and accretionary processes in lunar and meteoritic breccias

Particle track studies reveal an abundant record of fossil solar flare tracks in breccia components. Metamorphic events govern the degree to which this record is preserved, and studies of phases with different track retentivities allow limits to be placed on temperatures reached during a rock's history. The least affected breccias have never experienced temperatures as great as 300 C. Two breccias which contain xenon from spontaneous fission of Pu-244 (14301 and 14318) and Xe-129 (14301 only) have never been heated above about 700 C. This and evidence for a surface irradiation of some of the breccia components support a surface implantation model for the origin of the xenon in these breccias. Green glass spheres in 15086 have not been heated above about 300 C during or after breccia formation yet have retained fission tracks for less than 0.7 G.y. Argon ages of about 3.5 G.y. for similar green glass are at least five times as great and may indicate that the glass was not completely outgassed at is formation.

Macdougall, D.

NASA Technology Evaluation for Environmental Risk Mitigation Remediation Technology Collaboration Development

NASA is committed to finding solutions to agency cleanup problems that are better, cheaper, and more effective than the status quo. Unfortunately, some potential solutions involve innovative technologies for which NASA remediation managers may not have a high level of understanding or confidence. Since 2004, NASA's Stennis Space Center (SSC) in Mississippi has been pumping groundwater contaminated with trichloroethylene (TCE) and other halogenated volatile organic compounds (HVOC) from their cleanup location designated "Area G" through extraction wells to an aboveground treatment system. Over time, however, the effectiveness of this treatment strategy has diminished and an alternative approach is needed. In 2012, professionals from NASA's Principal Center for Technology Evaluation for Environmental Risk Mitigation (TEERM) introduced SSC managers to an innovative technology for enhancing the performance of SSC's existing pump and treat system. The technology, generally referred to as in situ chemical oxidation (ISCO), involves slowly and continuously injecting a strong but safe chemical oxidant into the groundwater. Treatment is enhanced by a "surfactant-type effect" which causes residual contamination from saturated soil to be released into the dissolved-phase where it can be readily oxidized. Any dissolved-phase contamination that was not oxidized can be collected by the extraction well network and treated aboveground. SSC was not familiar with the technology so to increase their confidence, TEERM identified a contractor who was willing to demonstrate their product and process at a significantly reduced price. An initial, small-scale demonstration of ISCO began at sse in March 2012 and completed in August 2012. This successful demonstration was followed by three larger-scale ISCO demonstrations between August and December 2012. The contractor's innovative Continuous Injection System (CIS) incorporated "green" and sustainable technologies and practices. A slow injection rate was maintained autonomously by the CIS, eliminating the need for multiple mobilizations of personnel and powered equipment. The CIS was calibrated to deliver only as much reagent as the formation would accept without "short circuiting", minimizing material waste. Public utility water pressure was used to mix, dilute, and inject the reagent. NASA personnel were trained to operate and maintain the system and remote monitoring and injection control capabilities were developed, further reducing the need for contractor mobilizations to the site. An integrated solar photovoltaic panel was used to power the control valves and web monitoring telemetry. SSC provided hydrogen peroxide for the process using their existing supplier for the aboveground pump and treat systems. The only consumable required from the contractor was their proprietary activator to catalyze SSC's peroxide.

Romeo, James

Crystal Growth of ZnSe and Related Ternary Compound Semiconductors by Vapor Transport

Interest in optical devices which can operate in the visible spectrum has motivated research interest in the II-VI wide band gap semiconductor materials. The recent challenge for semiconductor opto-electronics is the development of a laser which can operate at short visible wavelengths. In the past several years, major advances in thin film technology such as molecular beam epitaxy and metal organic chemical vapor deposition have demonstrated the applicability of II-VI materials to important devices such as light-emitting diodes, lasers, and ultraviolet detectors. With an energy gap of 2.7 eV at room temperature, and an efficient band- to-band transition, ZnSe has been studied extensively as the primary candidate for a blue light emitting diode for optical displays, high density recording, and military communications. By employing a ternary or quaternary system, the energy band gap of II-VI materials can be tuned to a specific range. While issues related to the compositional inhomogeneity and defect incorporation are still to be fully resolved, ZnSe bulk crystals and ZnSe-based heterostructures such as ZnSe/ZnSeS, ZnSe/ZnCdSe and ZnCdSe/ZnSeS have showed photopumped lasing capability in the blue-green region at a low threshold power and high temperatures. The demonstration of its optical bistable properties in bulk and thin film forms also make ZnSe a possible candidate material for the building blocks of a digital optical computer. Despite this, developments in the crystal growth of bulk H-VI semiconductor materials has not advanced far enough to provide the low price, high quality substrates needed for the thin film growth technology.

Su, Ching-Hua

Additive Manufacture of Refractory Metals for Aerospace Applications

High temperature refractory metals are required for a number of high temperature propulsion applications. Refractory metals are expensive, difficult to manufacture with high buy-to-fly ratios, and few vendors. Additive manufacture (AM) is used to produce C103, Molybdenum (Mo), and Tungsten (W) reaction chamber and thrust stand-off as well as Iridium ultra-fine lattice catalysts for integration into 1 N green propulsion thrusters. Refractory AM is in development and like traditional AM alloys requires substantial post-processing to include powder heat treatment, surface finish enhancement, inspection, and machining before placed in service. The combination of limited feedstock sources, high temperature processing, oxygen sensitivity, fracture prone nature, and need for elevated temperature mechanical testing limit the number of qualified facilities capable of post-processing AM refractory materials, which add to cost and schedule constraints. However, properly implemented refractory metal AM can overcome existing manufacture limitations by greatly increasing design flexibility, new material options, reduced price, decreased lead-time, and leverage the ever growing AM commercial supply base.

Refractory metal additive manufacture

Additive Manufacture of Refractory Metals for Aerospace Applications

High temperature refractory metals are required for a number of high temperature propulsion applications. Refractory metals are expensive, difficult to manufacture with high buy-to-fly ratios, and few vendors. Additive manufacture (AM) is used to produce C103, Molybdenum (Mo), and Tungsten (W) reaction chamber and thrust stand-off as well as Iridium ultra-fine lattice catalysts for integration into 1 N green propulsion thrusters. Refractory AM is in development and like traditional AM alloys requires substantial post-processing to include powder heat treatment, surface finish enhancement, inspection, and machining before placed in service. The combination of limited feedstock sources, high temperature processing, oxygen sensitivity, fracture prone nature, and need for elevated temperature mechanical testing limit the number of qualified facilities capable of post-processing AM refractory materials, which add to cost and schedule constraints. However, properly implemented refractory metal AM can overcome existing manufacture limitations by greatly increasing design flexibility, new material options, reduced price, decreased lead-time, and leverage the ever growing AM commercial supply base.

Refractory metal additive manufacture

The Effect of Agricultural Growing Season Change on Market Prices in Africa

Local agricultural production is a key element of food security in many agricultural countries in Africa. Climate change and variability is likely to adversely affect these countries, particularly as they affect the ability of smallholder farmers to raise enough food to feed themselves. Seasonality influences farmers' decisions about when to sow and harvest, and ultimately the success or failure of their crops. At a 2009 conference in the United Kingdom hosted by the Institute of Development Studies, Jennings and Magrath (2009) described farmer reports from East Asia, South Asia, Southern Africa, East Africa and Latin America. Farmers indicate significant changes in the timing of rainy seasons and the pattern of rains within seasons, including: More erratic rainfall, coming at unexpected times in and out of season; Extreme storms and unusually intense rainfall are punctuated by longer dry spells within the rainy season; Increasing uncertainty as to the start of rainy seasons in many areas; Short or transitional second rainy seasons are becoming stronger than normal or are disappearing altogether. These farmer perceptions of change are striking in that they are geographically widespread and are remarkably consistent across diverse regions (Jennings and Magrath, 2009). The impact of these changes on farmers with small plots and few resources is large. Farming is becoming riskier because of heat stress, lack of water, pests and diseases that interact with ongoing pressures on natural resources. Lack of predictability in the start and length of the growing season affects the ability of farmers to invest in appropriate fertilizer levels or improved, high yielding varieties. These changes occur at the same time as the demand for food is rising and is projected to continue to rise for the next fifty years (IAASTD, 2008). Long-term data records derived from satellite remote sensing can be used to verify these reports, providing necessary analysis and documentation required to plan effective adaptation strategies. Remote sensing data can also provide some understanding of the spatial extent of these changes and whether they are likely to continue. Given the agricultural nature of most economies on the African continent, agricultural production continues to be a critical determinant of both food security and economic growth (Funk and Brown, 2009). Crop phenological parameters, such as the start and end of the growing season, the total length of the growing season, and the rate of greening and senescence are important for planning crop management, crop diversification, and intensification. The World Food Summit of 1996 defined food security as: "when all people at all times have access to sufficient, safe, nutritious food to maintain a healthy and active life". Food security roughly depends on three factors: 1) availability of food; 2) access to food and 3) appropriate use of food, as well as adequate water and sanitation. The first factor is dependent on growing conditions and weather and climate. In a previous paper we have investigated this factor by evaluating the effect of large scale climate oscillation on land surface phenology (Brown et al., 2010). We found that all areas in Africa are significantly affected by at least one type of large scale climate oscillations and concluded that these somewhat predictable oscillations could perhaps be used to forecast agricultural production. In addition, we have evaluated changes in agricultural land surface phenology over time (Brown et al., 2012). We found that land surface phenology models, which link large-scale vegetation indices with accumulated humidity, could successfully predict agricultural productivity in several countries around the world. In this chapter we are interested in the effect of variability in peak timing of the growing season, or phenology, on the second factor of food security, food access. In this chapter we want to determine if there is a link between market prices and land surface phenology and to determine which markets are vulnerable to land surface phenology changes and variability and which market prices are not correlated.

Prices

NASA’s Lunar Trailblazer Mission: A Pioneering Small Satellite for Lunar Water and Lunar Geology

Selected in 2019 as a NASA SIMPLEx mission, Lunar Trailblazer is in implementation for flight system delivery at the end of 2022. The mission’s goal is to understand the form, abundance, and distribution of water on the Moon and the lunar water cycle. Lunar Trailblazer also collects data of candidate landing sites to inform planning for future human and robotic exploration of the Moon and evaluate the potential for in situ resource utilization. Lunar Trailblazer’s two science instruments, the High-resolution Volatiles and Minerals Moon Mapper (HVM3) and the Lunar Thermal Mapper (LTM) provide simultaneous high-resolution spectral imaging data to map OH/water, crustal composition, and thermophysical properties from a 100±30 km lunar polar orbit. The ~210-kg flight system deploys from an ESPA Grande and utilizes a ~1000 m/s ΔV hydrazine chemical propulsion system, similar to that employed by GRAIL. Trailblazing elements include the novel state-of-the-art dataset collected at substantially reduced price point, fully geographically co-registered data products delivered to the Planetary Data System, planetary mission team demographics, Caltech campus mission operations, and student staffing of select mission ops roles. Lunar Trailblazer’s pioneering development is providing key lessons learned for future planetary small spacecraft.

Zareh, Shannon

The Neutron Star Interior Composition Explorer (NICER): Design and Development

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2{12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017 on the Commercial Resupply Services SpaceX-11 flight. Its scientific objectives are to investigate the internal structure, dynamics, and energetics of neutron stars, the densest objects in the universe. During Phase C, flight components including optics, detectors, the optical bench, pointing actuators, electronics, and others were subjected to environmental testing and integrated to form the flight payload. A custom-built facility was used to co-align and integrate the X-ray \concentrator" optics and silicon-drift detectors. Ground calibration provided robust performance measures of the optical (at NASA's Goddard Space Flight Center) and detector (at the Massachusetts Institute of Technology) subsystems, while comprehensive functional tests prior to payload-level environmental testing met all instrument performance requirements. We describe here the implementation of NICER's major subsystems, summarize their performance and calibration, and outline the component-level testing that was successfully applied.

SEXTANT

On-Orbit Manufacturing From Orbital Factories to In Situ Resource Utilization

This webinar will review commercial prospects for manufacturing in orbit. Doing business in space is rapidly becoming more reliable, affordable and accessible. From 2010 to 2015 launch prices went down by a factor of 10 or more, to about $5,000kg while investments into Space 2.0 companies and technologies are closing in on $2.5 Billion (New Space Global). With three commercial suppliers (SpaceX, Orbital ATK and Sierra Nevada Corp) to Earths orbits, mission frequency is improving dramatically. Moreover, private space companies (SpaceX Reusable Dragon Lab; Bigelows B330) are also scouting the opportunities of renting or selling modules as platforms for orbital free-flying facilities; modules that can be used for automated fabrication to manned experiments.Topics addressed in the webinar include: 1. Case studies of unique competitive advantages that can be gained from microgravity and space vacuum: wafer reprocessing, fiber optics, crystal growth;2. Prospective solar power orbital data centers;3. Reuse and recycling of orbital debris as a possible feedstock for robotic 3D fabrication potentially in the vacuum as well as inside facilities;4. The story behind the original WakeShield wafer fabrication facility and its relevance to todays activities;5. Energy needs for on-orbit manufacturing6. Environmental value proposition of on-orbit manufacturing for products with toxic byproducts or excessively large green house gases footprints;7. Longer term scenario of flexible, connected, automated, intelligent and sustainable orbital factories of the future.Opening up a less-appreciated aspect of NewSpace, this webinar will be of high interest to CTOs, Directors and Managers from product development to RD, Innovation Strategy leaders, and investors, across many different industrial verticals (materials, electronics, pharmaceuticals, advanced sustainable manufacturing, bioengineering, etc.)and anyone trying to understand what value space can have for their business in the near and far future.

Cozmuta, Ioana