Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “graphene morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Flash Graphene Morphologies

Flash Joule heating (FJH) can convert almost any carbon-based precursor into bulk quantities of graphene. This work explores the morphologies and properties of flash graphene (FG) generated from carbon black. It is shown that FG is partially comprised of sheets of turbostratic FG (tFG) that have a rotational mismatch between neighboring layers. The remainder of the FG is wrinkled graphene sheets that resemble non-graphitizing carbon. To generate high quality tFG sheets, a FJH duration of 30 – 100 ms is employed. Beyond 100 ms, the turbostratic sheets have time to AB-stack and form bulk graphite. Atomistic simulations reveal that generic thermal annealing yields predominantly wrinkled graphene which displays minimal to no alignment of graphitic planes, as opposed to the high-quality tFG that might be formed under the direct influence of current conducted through the material. As a result, the tFG was easily exfoliated via shear, hence the FJH process has the potential for bulk production of tFG without the need for pre-exfoliation using chemicals or high energy mechanical shear.

01 COAL, LIGNITE, AND PEAT↗

Effect of Reaction Kinetics on Graphene-Edge Morphology and Composition

New simulations of graphene growth in flame environments are presented. The simulations employed a kinetic Monte Carlo (KMC) algorithm coupled to molecular mechanics (MM) geometry optimization to track individual graphenic species as they evolve. Focus was given to incorporation of five-member rings and resulting curvature and edge defects. The model code was re-written to be more computationally efficient enabling a larger set of simulations to be run, decreasing stochastic fluctuations in the averaged results. The model also included updated rate coefficients for graphene edge reactions recently published in the literature. Sensitivity analysis, enabled by the more efficient coding, confirmed the importance of the updated rates as well as providing further insight on key reactions controlling layer growth and morphology. The new KMC code was applied to simulate graphene-layer growth in the environments of laminar premixed flames. Finally, in these flame simulations, C-H ratios of evolving structures were computed and compared to those from experiment and from an alternate model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strain and morphology of graphene membranes on responsive microhydrogel patterns

We study the configuration of atomically-thin graphene membranes on tunable microhydrogel patterns. The polyethylene oxide microhydrogel structures patterned by electron-beam lithography show increase in height, with a persistent swelling ratio up to ∼10, upon exposure to vapors of an organic solvent. We demonstrate that modifying the height fluctuations of the microhydrogel affects the strain and morphology of ultrathin graphene membrane over-layer. Raman spectroscopic investigations indicate that small lattice strains can be switched on in mechanically exfoliated few-layer graphene membranes that span these microhydrogel structures. In case of chemical-vapor deposited single-layer graphene, we observe Raman signatures of local depinning of the membranes upon swelling of microhydrogel pillars. We attribute this depinning transition to the competition between membrane-substrate adhesion energy and membrane strain energy, where the latter is tuned by hydrogel swelling.

36 MATERIALS SCIENCE↗

Morphology of graphene on SiC(0001) surfaces.

Graphene is formed on SiC(000{bar 1}) surfaces (the so-called C-face of the crystal) by annealing in vacuum, with the resulting films characterized by atomic force microscopy, Auger electron spectroscopy, scanning Auger microscopy, and Raman spectroscopy. Morphology of these films is compared with the graphene films grown on SiC(0001) surfaces (the Si-face). Graphene forms a terraced morphology on the C-face, whereas it forms with a flatter morphology on the Si-face. It is argued that this difference occurs because of differing interface structures in the two cases. For certain SiC wafers, nanocrystalline graphite is found to form on top of the graphene.

36 MATERIALS SCIENCE↗

Controlling Edge Morphology in Graphene Layers Using Electron Irradiation: From Sharp Atomic Edges to Coalesced Layers Forming Loops

Recent experimental reports indicate that Joule heating can atomically sharpen the edges of chemical vapor deposition grown graphitic nanoribbons. The absence or presence of loops between adjacent layers in the annealed materials is the topic of a growing debate that this Letter aims to put to rest. We offer a rationale explaining why loops do form if Joule heating is used alone, and why adjacent nanoribbon layers do not coalesce when Joule heating is applied after high-energy electrons first irradiate the sample. Our work, based on large-scale quantum molecular dynamics and electronic-transport calculations, shows that vacancies on adjacent graphene sheets, created by electron irradiation, inhibit the formation of edge loops.

36 MATERIALS SCIENCE↗

Dy uniform film morphologies on graphene studied with SPA-LEED and STM

The use of graphene for microelectronics and spintronic applications requires strategies for metals to wet graphene and to grow layer-by-layer. This is especially important when metals will be used as electrical contacts or as spin filters. Extensive work in the literature so far has shown that this is very challenging, since practically all metals grow 3D, with multi-height islands forming easily. Reasons for the 3D morphology are the much weaker metal carbon bond when compared to the metal cohesive energy and the role of Coulomb repulsion of the poorly screened charges at the metal graphene interface. We employed the complementary techniques of SPA-LEED and STM to study the growth of Dy on graphene. It was found that under kinetic limitations it is possible to fully cover graphene with a bilayer Dy film, by growing well below room temperature in stepwise deposition experiments. Lastly, the Dy film, however, is amorphous but ways to crystallize it within the 2D morphology are possible, since long range order improves at higher growth temperature.

36 MATERIALS SCIENCE↗

The correlation of epitaxial graphene properties and morphology of SiC (0001)

The electronic properties of epitaxial graphene (EG) on SiC (0001) depend sensitively on the surface morphology of SiC substrate. Here, 2–3 layers of graphene were grown on on-axis 6H-SiC with different step densities realized through controlling growth temperature and ambient pressure. We show that epitaxial graphene on SiC (0001) with low step density and straight step edge possesses fewer point defects laying mostly on step edges and higher carrier mobility. A relationship between step density and EG mobility is established. The linear scan of Raman spectra combined with the atomic force microscopy morphology images revealed that the Raman fingerprint peaks are nearly the same on terraces, but shift significantly while cross step edges, suggesting the graphene is not homogeneous in strain and carrier concentration over terraces and step edges of substrates. Thus, control morphology of epitaxial graphene on SiC (0001) is a simple and effective method to pursue optimal route for high quality graphene and will be helpful to prepare wafer sized graphene for device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct Growth of Vertically-oriented Graphene for Field-Effect Transistor Biosensor

A sensitive and selective field-effect transistor (FET) biosensor is demonstrated using vertically-oriented graphene (VG) sheets labeled with gold nanoparticle (NP)-antibody conjugates. VG sheets are directly grown on the sensor electrode using a plasma-enhanced chemical vapor deposition (PECVD) method and function as the sensing channel. The protein detection is accomplished through measuring changes in the electrical signal from the FET sensor upon the antibody-antigen binding. The novel biosensor with unique graphene morphology shows high sensitivity (down to ,2 ng/ml or 13 pM) and selectivity towards specific proteins. The PECVD growth of VG presents a one-step and reliable approach to prepare graphene-based electronic biosensors.

NANOSTRUCTURES↗

Confined seeds derived sodium titanate/graphene composite with synergistic storage ability toward high performance sodium ion capacitors

Sodium ion capacitors (SICs) are increasingly being focused, due to the feature of high energy/power densities derived from the integrated energy storage mechanisms, as well as the ubiquitous sodium sources. Practical anodes with exceptional rate capability can circumvent the kinetic mismatch with cathode, boosting energy/power metrics. Herein, a Na 2 Ti 7 O 15 nanowire/graphene anode is synthesized through an atomic layer deposition (ALD) seeding technique, by which the confined seeds enable Na 2 Ti 7 O 15 with ultra-high aspect ratio and interweaved structure with graphene nanosheets. The composite delivers a superior rate capability of 60 mAh g –1 at a high rate of 17.7 A g –1 , and an exceptional cyclic stability of 90% retention after 10 000 cycles even at 8.85 Ag –1 . It is demonstrated that the morphology, graphene platform, intrinsically low energy diffusion barrier of Na 2 Ti 7 O 15 , and associated reaction mechanism synergize the electron transport, sodium ion migration, and surface capacitive contribution, giving rise to such a decent electrochemical performance. The SICs deliver high energy/power densities (82.7 Wh kg –1 /97.5 W kg –1 , 25 kW kg –1 with 16 Wh kg –1 retained), proving a promise particularly at extremely fast charge/discharge condition. The proposed ALD seeding technique can be developed into a technical strategy for synthesizing high performance energy storage materials.

25 ENERGY STORAGE↗

Surface Morphology and Transport Studies of Epitaxial Graphene on SiC(000-1)

Annealing conditions are critical to the properties of epitaxial graphene formed by thermal decomposition of silicon carbide. Here, we report the evolution of coherent electronic transport with increasing anneal temperatures, combined with low energy electron micrographs of equivalent surfaces showing corresponding structural coherence. Ultrahigh vacuum conditions and temperatures in the range of 1250-1300 C produce granular films with a lateral grain size of {approx}20 nm, while temperatures of 1400 C or higher result in grains with progressively larger lateral dimensions in the micron range. Transport measurements show how the electronic coherence length increases as a result of the more coherent physical structure, with a crossover from two-dimensional variable range hopping to the weak localization regime. Here, we show that while the duration of the anneal affects coverage and clustering of grains, the size of individual grains is determined by anneal temperature, with evidence of coalescence of smaller grains into larger domains, suggesting that multistage anneals at different temperatures may yield high-quality graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Few-Layers Graphene Film and Copper Surface Morphology for Improved Corrosion Protection of Copper

Graphene has shown excellent corrosion protection of copper (Cu). The corrosion protection of Cu is governed by the characteristics of the deposited graphene and Cu surface morphology underneath. In this work, graphene films (1-2, 4-5 layers) were deposited on Cu using a chemical vapor deposition by changing hydrogen (H{sub 2}) concentration during the annealing stage. The chemical structure and surface microstructural features of graphene/Cu were inspected by Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy. The electrochemical corrosion performance of graphene/Cu was studied in 0.5 M sodium chloride solution using potentiodynamic polarization and electrochemical impedance spectroscopic measurements. The 1-2 layers of graphene and rough Cu surface were obtained for low H{sub 2} concentrations (0 and 2.5%), whereas high H{sub 2} concentrations, 20 and 50%, resulted in a smooth Cu surface and 4-5 layers of graphene. Our results showed that Cu with a smooth surface and multilayer graphene film exhibited the best corrosion resistance against electrochemical degradation. Tafel analysis revealed that Cu with 4-5 layers of graphene coating corroded nearly three orders of magnitude slower than the annealed Cu, without graphene coating. The results of this study can be useful for several applications where Cu is in close contact with salt species.

36 MATERIALS SCIENCE↗

Optical and morphological properties of graphene sheets decorated with ZnO nanowires via polyol enhancement

Graphene-ZnO nanocomposites have proven to be very useful materials for photovoltaic and sensor applications. Here, we report a facile, one-step in situ polymerization method for synthesis of graphene sheets randomly decorated with zinc oxide nanowires using ethylene glycol as solvent. We have used hydrothermal treatment for growth of ZnO nanowires. UV-visible spectra peak shifting around 288nm and 307 nm shows the presence of ZnO on graphene structure. Photoluminiscence spectra (PL) in 400nm-500nm region exhibits the luminescence quenching effect. Scanning electron microscopy (SEM) image confirms the growth of ZnO nanowires on graphene sheets.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Temperature effects on the friction characteristics of graphene

An atomic force microscope is used to study the nanoscale frictional characteristics of graphene exfoliated onto weakly adherent silica substrates. Different from the decrease in the friction force with temperature for Si tips sliding on silica substrates, the friction forces for the same tip sliding on a graphene surface have an increasing trend with temperature. Through exploring the morphologies of graphene in both suspended and supported states and at different temperatures, it is found that surface fluctuations are the main reason behind the suppression of the thermal lubrication, which leads to an increase in the friction force with temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Direct graphene growth from highly ordered pyrolytic graphite using pulsed Nd: YAG laser on p-Si (100) substrate at 700°c

Few layer graphene was deposited on p-type Si (100) substrates by pulsed laser deposition of highly ordered pyrolytic graphite (HOPG) target at a relatively low temperature of 700 °C, without any catalytic layer. Effect of laser energy on the ability to produce the crystalline graphene was studied. It was observed that a laser energy of 220 mJ/pulse lead to form few layer graphene while higher laser energy of 440 mJ/pulse was detrimental to precipitation process. The reasons behind this observation are also discussed. Graphene samples were analyzed using Raman spectroscopy and surface morphology of graphene samples was confirmed using field emission scanning electron microscope (FE-SEM).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and characterization of solar exfoliated graphene

Hummer's method was used for the chemical synthesis of graphite oxide from graphite flakes. Simultaneous exfoliation and reduction of graphite oxide to Graphene was achieved through focused solar light irradiation using a convex lens. The morphological characteristics were studied using SEM and TEM. Layered morphology of Graphene was observed through TEM. Raman spectra and FTIR were used for the structural characterization of Graphene. EDAX analysis showed the drop in oxygen content during exfoliation. The method offered a faster, easier and environmental friendly method to produce Graphene for potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of interfacial alignments on the stability of graphene on Ru(0001) substrate

Structure and electronic properties of two-dimensional materials could be tuned by interfacial misfit or orientation angles. However, graphene grown on Ru(0001) substrate usually shows stable moiré superlattice with a periodicity of 3.0 nm indicating an aligned geometry. The reason for the absence of misaligned structure is still unknown. We have performed first-principles calculation to investigate the microstructure and morphology of graphene on Ru(0001) substrate in both aligned and misaligned geometries with rotation angles of 0°, 7.6°, and 23.4°, respectively. Our results indicate that both the graphene corrugation and moiré superlattice periodicity decrease as the rotation angle increases. Meanwhile the interaction energy between graphene and Ru(0001) substrate also becomes weakened with the rotation angle, as the decrease and discretization of intense charge transfer sites at the graphene/Ru interface, which is closely related to the interface stacking structure. Counterintuitively, the strain energy in graphene also increases anomalously with the rotation angle, which is attributed to the highly distorted local deformation of graphene due to the strong but discrete covalent bonding with Ru substrate. The simultaneous increase in both the interaction energy and strain energy in graphene/Ru(0001) heterostructure with rotation angle contributes to the preferred configuration in the aligned state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray photoelectron spectroscopy for identification of morphological defects and disorders in graphene devices

The progress in the development of graphene devices is promising, and they are now considered as an option for the current Si-based electronics. However, the structural defects in graphene may strongly influence the local electronic and mechanical characteristics. Although there are well-established analytical characterization methods to analyze the chemical and physical parameters of this material, they remain incapable of fully understanding of the morphological disorders. In this study, x-ray photoelectron spectroscopy (XPS) with an external voltage bias across the sample is used for the characterization of morphological defects in large area of a few layers graphene in a chemically specific fashion. For the XPS measurements, an external +6 V bias applied between the two electrodes and areal analysis for three different elements, C1s, O1s, and Au4f, were performed. By monitoring the variations of the binding energy, the authors extract the voltage variations in the graphene layer which reveal information about the structural defects, cracks, impurities, and oxidation levels in graphene layer which are created purposely or not. Raman spectroscopy was also utilized to confirm some of the findings. This methodology the authors offer is simple but provides promising chemically specific electrical and morphological information.

42 ENGINEERING↗