Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “gradients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Towards Robust and Accurate Implicit Gradient Methods for Second- and Third-Order Nodal-Gradient Cell-Centered Finite-Volume Discretizations on Tetrahedral Grids

In this paper, we introduce implicit gradient methods as alternatives to conventional least-squares gradient methods for second- and third-order nodal-gradient cell-centered finite-volume discretizations, where solutions are stored at cells but gradients are stored at nodes. Because of the unique configuration of solutions and gradients, implicit gradient systems developed for the node-centered edge-based discretization method can be directly applied once the numerical solutions are interpolated from cells to nodes with sufficient accuracy. The resulting defect-correction solver can be loosely coupled with a flow-equation solver, and at convergence, solutions and gradients that satisfy the corresponding residual equations are obtained. Each iteration is relatively cheap compared with least-squares methods involving hundreds of neighbors. Numerical results are presented for accuracy verification studies and some simple but realistic flow problems.

Computational Fluid Dynamics↗
DOE OSTI2023

Accelerating gradient descent and Adam via fractional gradients

Here we propose a class of novel fractional-order optimization algorithms. We define a fractional-order gradient via the Caputo fractional derivatives that generalizes integer-order gradient. We refer it to as the Caputo fractional-based gradient, and develop an efficient implementation to compute it. A general class of fractional-order optimization methods is then obtained by replacing integer-order gradients with the Caputo fractional-based gradients. To give concrete algorithms, we consider gradient descent (GD) and Adam, and extend them to the Caputo fractional GD (CfGD) and the Caputo fractional Adam (CfAdam). We demonstrate the superiority of CfGD and CfAdam on several large scale optimization problems that arise from scientific machine learning applications, such as ill-conditioned least squares problem on real-world data and the training of neural networks involving non-convex objective functions. Numerical examples show that both CfGD and CfAdam result in acceleration over GD and Adam, respectively. We also derive error bounds of CfGD for quadratic functions, which further indicate that CfGD could mitigate the dependence on the condition number in the rate of convergence and results in significant acceleration over GD.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

MaNGA DynPop – II. Global stellar population, gradients, and star-formation histories from integral-field spectroscopy of 10K galaxies: link with galaxy rotation, shape, and total-density gradients

ABSTRACT This is the second paper of the Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) Dynamics and stellar Population (DynPop) series, which analyses the global stellar population, radial gradients, and non-parametric star-formation history of ∼10K galaxies from the MaNGA Survey final data release 17 and relates them with dynamical properties of galaxies. We confirm the correlation between the stellar population properties and the stellar velocity dispersion σe, but also find that younger galaxies are more metal-poor at fixed σe. Stellar age, metallicity, and mass-to-light ratio (M*/L) all decrease with increasing galaxy rotation, while their radial gradients become more negative (i.e. lower value at the outskirts). The exception is the slow rotators, which also appear to have significantly negative metallicity gradients, confirming the mass–metallicity gradient correlation. Massive disc galaxies in the green valley, on the $(\sigma _{\rm e},\rm age)$ plane, show the most negative age and metallicity gradients, consistent with their old central bulges surrounded by young star-forming discs and metal-poor gas accretion. Galaxies with high σe, steep total mass-density slope, low dark matter fraction, high M*/L, and high metallicity have the highest star-formation rate at earlier times, and are currently quenched. We also discover a population of low-mass star-forming galaxies with low rotation but physically distinct from the massive slow rotators. A catalogue of these stellar population properties is provided publicly.

Astronomy & Astrophysics↗
DOE OSTI2022

Topology of the $O(3)$ non-linear sigma model under the gradient flow

The $O(3)$ non-linear sigma model (NLSM) is a prototypical field theory for QCD and ferromagnetism, featuring topological qualities. Though the topological susceptibility should vanish in physical theories, lattice simulations of the NLSM find that the topological susceptibility diverges in the continuum limit. We introduce a $\theta$-term and analyze the topological charge as a function of $\theta$ under the gradient flow. Our results show that divergence persists in the presence of the flow, even at non-zero $\theta$.

Thomas, Stuart↗
DOE OSTI2021

Laplacian Smoothing Stochastic Gradient Markov Chain Monte Carlo

As an important Markov chain Monte Carlo (MCMC) method, the stochastic gradient Langevin dynamics (SGLD) algorithm has achieved great success in Bayesian learning and posterior sampling. Furthermore, SGLD typically suffers from a slow convergence rate due to its large variance caused by the stochastic gradient. In order to alleviate these drawbacks, we leverage the recently developed Laplacian smoothing technique and propose a Laplacian smoothing stochastic gradient Langevin dynamics (LS-SGLD) algorithm. We prove that for sampling from both log-concave and non-log-concave densities, LS-SGLD achieves strictly smaller discretization error in 2-Wasserstein distance, although its mixing rate can be slightly slower. Experiments on both synthetic and real datasets verify our theoretical results and demonstrate the superior performance of LS-SGLD on different machine learning tasks including posterior sampling, Bayesian logistic regression, and training Bayesian convolutional neural networks.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Scale setting the Möbius domain wall fermion on gradient-flowed HISQ action using the omega baryon mass and the gradient-flow scales 𝑡 0 and 𝑤 0

We report on a subpercent scale determination using the omega baryon mass and gradient-flow methods. The calculations are performed on 22 ensembles of 𝑁 𝑓 =2 +1 +1 highly improved, rooted staggered sea-quark configurations generated by the MILC and CalLat Collaborations. The valence quark action used is Möbius domain wall fermions solved on these configurations after a gradient-flow smearing is applied with a flowtime of 𝑡 gf = 1 in lattice units. The ensembles span four lattice spacings in the range 0.06 ≲ 𝑎 ≲0.15 fm, six pion masses in the range 130 ≲ 𝑚 𝜋 ≲ 400 MeV and multiple lattice volumes. On each ensemble, the gradient-flow scales 𝑡 0 /𝑎 2 and 𝑤 0 /𝑎 and the omega baryon mass 𝑎⁢𝑚 Ω are computed. The dimensionless product of these quantities is then extrapolated to the continuum and infinite volume limits and interpolated to the physical light, strange and charm quark mass point in the isospin limit, resulting in the determination of $\sqrt{t}_0$ = 0.1422⁢(14) fm and 𝑤 0 = 0.1709⁢(11) fm with all sources of statistical and systematic uncertainty accounted for. The dominant uncertainty in both results is the stochastic uncertainty, though for $\sqrt{t}_0$ there are comparable continuum extrapolation uncertainties. For 𝑤 0 , there is a clear path for a few-per-mille uncertainty just through improved stochastic precision, as recently obtained by the Budapest-Marseille-Wuppertal Collaboration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1971

Gravity gradient preliminary investigations, part 2: Lunar tidal gravity gradients and stresses (exhibit C)

Preliminary analysis of the gravity gradients associated with gravity tides on the moon caused by the earth indicates that the relative changes in the gradients are very irregular, and large, and about 15 times greater than those experienced on earth. Thus gradients, in preference to gravity tides themselves, may well be an important key in correlating tide effects with lunar transient events and moonquakes, and also in determining triggering mechanisms for crustal movement and faulting. Preliminary analysis of lunar crustal stresses and strains caused by lunar gravity tides indicates that these factors may be more direct causative agents or triggering mechanisms. In particular, the cubic dilation undergoes relatively large changes and is about 11 times greater on the moon than on earth. Thus it should be correspondingly more important.

Houston, M. H.↗
DOE OSTI2025

Accelerating Discovery of Solid‐State Thin‐Film Metal Dealloying for 3D Nanoarchitecture Materials Design through Laser Thermal Gradient Treatment

Thin‐film solid‐state metal dealloying (thin‐film SSMD) is a promising method for fabricating nanostructures with controlled morphology and efficiency, offering advantages over conventional bulk materials processing methods for integration into practical applications. Although machine learning (ML) has facilitated the design of dealloying systems, the selection of key thermal treatment parameters for nanostructure formation remains largely unknown and dependent on experimental trial and error. To overcome this challenge, a workflow enabling high‐throughput characterization of thermal treatment parameters is demonstrated using a laser‐based thermal treatment to create temperature gradients on single thin‐film samples of Nb‐Al/Sc and Nb‐Al/Cu. This continuous thermal space enables observation of dealloying transitions and the resulting nanostructures of interest. Through synchrotron X‐ray multimodal and high‐throughput characterization, critical transitions and nanostructures can be rapidly captured and subsequently verified using electron microscopy. The key temperatures driving chemical reactions and morphological evolutions are clearly identified. While the oxidation may influence nanostructure formation during thin‐film treatment, the dealloying process at the dealloying front involves interactions solely between the dealloying elements, highlighting the availability and viability of the selected systems. Further, this approach enables efficient exploration of the dealloying process and validation of ML predictions, thereby accelerating the discovery of thin‐film SSMD systems with targeted nanostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Hydraulic architecture explains species moisture dependency but not mortality rates across a tropical rainfall gradient

Aim Intensified droughts are affecting tropical forests across the globe. However, the underlying mechanisms of tree drought response and mortality are poorly understood. Hydraulic traits and especially hydraulic safety margins (HSMs), i.e. the extent to which plants buffer themselves from thresholds of water stress, provide insights into species-specific drought vulnerability. Methods We investigated hydraulic traits during an intense drought triggered by the 2015-2016 El Niño on 27 canopy trees across three tropical forest sites with differing precipitation. We capitalized on the drought event as a time when plant water status might approach or exceed thresholds of water stress. We investigated the degree to which these traits varied across the rainfall gradient, as well as relationships amongst hydraulic traits and species-specific optimal moisture and mortality rates. Results There were no differences among sites for any measured trait. There was strong coordination among traits, with a network analysis revealing two major groups of coordinated traits. In one group there were water potentials, turgor loss point, sapwood capacitance and density, HSMs, and mortality rate. In the second group there was leaf mass per area, leaf dry matter content, hydraulic architecture (leaf area to sapwood area ratio), and species-specific optimal moisture. Conclusion These results demonstrated that while species with greater safety from turgor loss had lower mortality rates, hydraulic architecture was the only trait that explained species’ moisture dependency. Species with a greater leaf area to sapwood area ratio were associated with drier sites and reduced their transpirational demand during the dry season via deciduousness.

Hydraulic Saftey Margins, drought, tropical forest↗
NASA NTRS1972

Calculation of turbulent boundary layers with heat transfer and pressure gradient utilizing a compressibility transformation. Part 2: Constant property turbulent boundary layer flow with simultaneous mass transfer and pressure gradient

An analysis of the incompressible turbulent boundary layer, developing under the combined effects of mass transfer and pressure gradient, is presented in this paper. A strip-integral method is employed whereby two of the three governing equations are obtained by integrating the combined momentum and continuity equation to 50 percent and 100 percent, respectively, of the boundary-layer height. The latter equation is the usual momentum-integral equation; the former equation requires specification of shear. Accordingly, Clauser's equilibrium eddy-viscosity law is assumed valid at this point. The third and final equation is obtained by specifying that Stevenson's velocity profiles apply throughout the domain of interest, from which a skin-friction law can be derived. Comparisons of the numerical results with the experiments of McQuaid, which include combined effects of variable pressure gradient and mass transfer, show good agreement.

Boccio, J.↗
DOE OSTI2023

Accelerated Sparse Recovery via Gradient Descent with Nonlinear Conjugate Gradient Momentum

This paper applies an idea of adaptive momentum for the nonlinear conjugate gradient to accelerate optimization problems in sparse recovery. Specifically, we consider two types of minimization problems: a (single) differentiable function and the sum of a non-smooth function and a differentiable function. In the first case, we adopt a fixed step size to avoid the traditional line search and establish the convergence analysis of the proposed algorithm for a quadratic problem. This acceleration is further incorporated with an operator splitting technique to deal with the non-smooth function in the second case. As a result, we use the convex ι 1 and the nonconvex ι 1 – ι 2 functionals as two case studies to demonstrate the efficiency of the proposed approaches over traditional methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Learning electric vehicle driver range anxiety with an initial state of charge-oriented gradient boosting approach

This manuscript focuses on the modeling of electric vehicle (EV) driver’s range anxiety, a fear that a vehicle does not have sufficient range, or state of charge (SOC) of the battery pack, to reach its destination and would strand its occupants. Despite numerous research studies on the modeling of charging behaviors, modeling efforts to understand at what battery percentages do EV drivers charge their vehicles, and what are the associated contributing factors, are rather limited. To this end, an ensemble learning model based on gradient boosting is developed. The model sequentially fits new predictors to new residuals of the previous prediction and, then, minimizes the loss when adding the latest prediction. A total of 18 features are defined and extracted from the multisource data, which cover information on driver, vehicles, stations, traffic conditions, as well as spatial-temporal context information of the charging events. The analyzed dataset includes 4.5-year’s charging event log data from 3,096 users and 468 public charging stations in Kansas City Missouri, and the macroscopic travel demand model maintained by the metropolitan planning organization. Here, the result shows the proposed model achieved a satisfactory result with a R square value of 0.54 and root mean square error of 0.14, both better than multiple linear regression model and random forest model. To reduce range anxiety, it is suggested that the priorities of deploying new charging facilities should be given to the areas with higher daily traffic prediction, with more conservative EV users or that are further from residential areas.

33 ADVANCED PROPULSION SYSTEMS↗