Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “fuel cell components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

(Invited) Fuel Cell Component Durability for Million Mile Fuel Cell Trucks

While significant advances have been made and early commercial fuel cell light-duty vehicles (LDVs) are starting to be produced, fuel cells in the heavy-duty-vehicle (HDV) transportation sector (including trucks, long-haul semitrailers, maritime, trains, etc.) are nascent, despite the fact that advantages of fuel cells compared to both diesel and electric powertrains are very compelling in terms of emissions, charging time, efficiency, power-to-weight ratio, among others. However, the fuel-cell technology for HDVs requires a paradigm shift in fuel-cell research and development compared to LDVs, where the emphasis becomes efficiency and improvements in durability instead of a focus on increased power densities and lower cell costs. Heavy-duty applications require significantly longer vehicle lifetimes (>25,000 hours/1,000,000 miles for heavy-duty trucks), and therefore require improved fuel cell durability compared to light-duty vehicles. In 2020, HFTO formed the Million Mile Fuel Cell Truck Consortium (M2FCT) that includes a core team of five national laboratories to overcome durability and efficiency challenges in PEMFCs for heavy-duty applications with an initial focus on long-haul trucks. While targets and testing protocols have been developed for light-duty vehicles, the same level of targets and testing protocols have not been established for heavy-duty transportation. With operational times of greater than > 25,000 hours required, the need for well-developed accelerated stress tests (ASTs) is amplified. Results from these ASTs demonstrate the need for more durable electrode layers and well-controlled potential variations. Finally, this presentation will provide an overview of the DOE's Fuel Cell R&D approach, highlighting past and current activities, as well as strategies to enable fuel cell competiveness for heavy-duty applications.

25 ENERGY STORAGE↗
DOE OSTI2021

A review of functions, attributes, properties and measurements for the quality control of proton exchange membrane fuel cell components

Quality control (QC) is an essential part of fuel cell technology industrialization, providing means to reduce cost of components, enhancing the reliability of the final product, and offering specification guidance for new entrants in the supply chain. The membrane electrode assembly (MEA), including membrane, catalyst layer (CL), and gas diffusion layer (GDL), as well as bipolar plate (BP), are key components of a proton exchange membrane (PEM) fuel cell, and the attributes of each component strongly correlate with the cell performance and longevity. To ensure the quality of the fuel cell, it is of great importance to characterize the properties with respect to the standardization of component/sub-component specifications. In collaboration with the fuel cell industry, this work aims at establishing compendiums of attributes, or so-called books of attributes, of key fuel cell components for the QC of PEM fuel cells through reviewing, identifying, categorizing, and prioritizing the main attributes/properties that determine their functionalities. The books of attributes for the major PEM fuel cell components include catalyst coated membrane (CCM) as a sub-assembly, GDL, and BP. To address the full spectrum of fuel cell components, gaskets and sub-gaskets are also included.

25 ENERGY STORAGE↗
DOE OSTI2016

High durability fuel cell components with cerium salt additives

A fuel cell membrane electrode assembly is provided comprising a polymer electrolyte membrane which comprises a polymer that comprises bound anionic functional groups, wherein the polymer electrolyte membrane additionally comprises cerium cations. In another aspect, a fuel cell membrane electrode assembly is provided comprising a polymer electrolyte membrane which comprises a polymer that comprises bound anionic functional groups, wherein at least a portion of the anionic functional groups are in acid form and at least a portion of the anionic functional groups are neutralized by cerium cations. In another aspect, a polymer electrolyte membrane is provided which comprises a polymer that comprises bound anionic functional groups, wherein the polymer electrolyte membrane additionally comprises cerium cations, and wherein the amount of cerium cations present is between 0.001 and 0.5 charge equivalents based on the molar amount of acid functional groups present in the polymer electrolyte, more typically between 0.005 and 0.2, more typically between 0.01 and 0.1, and more typically between 0.02 and 0.05.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2017

Changes in the wettability of polymer electrolyte fuel cells components during cationic contamination and mitigation

Foreign cations are shown to cause mass transport losses, in particular due to wettability changes in the micro-porous layers (MPL) and the carbon paper substrate, and have a major impact on the durability and the performance of polymer electrolyte fuel cells. Here we studied the effects of cationic impurities on fuel cell system performance, especially on the water management by employing in-situ and ex-situ contamination methods. Changes in the wettability of the carbon paper surface following the in-situ contamination injection were quantified using the Wilhelmy plate method. The CaSO 4 precipitation on the macro-pores of the carbon paper substrate after the contamination injection causes a higher wettability leading to increased flooding of the carbon paper substrate and consequent mass transport losses. An ex-situ cleaning with an acid solution is shown to be very effective in removing the salt deposits of the carbon paper substrate. During the mitigation, the highly hydrophobic MPL acts as a barrier to the transport of the recovery solution into the membrane-electrode assembly (MEA), therefore isopropanol (IPA) was added to both the contaminant solution and the recovery solution to increase the wettability of the MPL. Wetting force measurements confirm that the added IPA can alter the wettability of the MPL and can render it fully hydrophilic, enabling the transport of the recovery solution into the MEA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Integrated Regional Technical Exchange Centers

The Ohio Fuel Cell Coalition (OFCC) with an award from the Department of Energy Fuel Cell Fuel Cell Technologies Office (FCTO), Award No. DE-EE0006931, conducted a project to facilitate the development of a robust supply chain for fuel cell and hydrogen systems that would accelerate mass production, reduced cost, and improve performance and durability of Proton Exchange Membrane (PEM) fuel cell systems.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

A Review on Bioinspired Proton Exchange Membrane Fuel Cell: Design and Materials

With the climate crisis gathering recognition, there has been significant interest in clean energy. As a reliable and clean energy solution, markets transitioning toward sustainable energy have identified polymer electrolyte membrane fuel cells (PEMFCs) as a critical technology. The increasing interest in PEMFCs is primarily due to their high energy density, high efficiency and zero greenhouse gas emission. However, additional development is required to overcome the current barriers associated with fuel cell component design, high manufacturing cost, and insufficient stability. Bioinspired designs have the potential to provide new and valuable insights using novel techniques for extracting design inspirations from biological structures. Applying these design concepts to develop materials and structures for various fuel cell components can be transformative. The well–adapted structures and functional features of biological systems have been proven to greatly enhance the performance of current designs through novel and optimized pathways. Bioinspired designs have indeed lived up to performance expectations and even exceed them. Herein, the potential and value of using these bioinspired designs are discussed. Recent studies and advancements based on nature–inspired structures for components of PEMFCs and how these design considerations substantiate their claim as an attractive alternative to conventional designs are discussed.

25 ENERGY STORAGE↗
DOE OSTI2021

Understanding Carbon Dioxide Transfer in Direct Methanol Fuel Cells Using a Pore-Scale Model

Abstract The gas flow of carbon dioxide from the catalyst layer (CL) through the microporous layer (MPL) and gas diffusion layer (GDL) has great impacts on the water and fuel management in direct methanol fuel cells (DMFCs). This work has developed a liquid–vapor two-phase model considering the counter flow of carbon dioxide gas, methanol, and water liquid solution in porous electrodes of DMFC. The model simulation includes the capillary pressure as well as the pressure drop due to flow resistance through the fuel cell components. The pressure drop of carbon dioxide flow is found to be about two to three orders of magnitude higher than the pressure drop of the liquid flow. The big difference between liquid and gas pressure drops can be explained by two reasons: volume flowrate of gas is three orders of magnitude higher than that of liquid; only a small fraction of pores (<5%) in hydrophilic fuel cell components are available for gas flow. Model results indicate that the gas pressure and the mass transfer resistance of liquid and gas are more sensitive to the pore size distribution than the thickness of porous components. To buildup high gas pressure and high mass transfer resistance of liquid, the MPL and CL should avoid micro-cracks during manufacture. Distributions of pore size and wettability of the GDL and MPL have been designed to reduce the methanol crossover and improve fuel efficiency. The model results provide design guidance to obtain superior DMFC performance using highly concentrated methanol solutions or even pure methanol.

Electrochemistry↗
DOE OSTI2018

Protective Ceramic Coatings for Solid Oxide Fuel Cell (SOFC) Balance‐of‐Plant Components

Solid oxide fuel cells (SOFCs) have the potential to meet the growing need for electrical power generation if the cost per megawatt can be further reduced. Currently, SOFC stacks are replaced too frequently to be cost competitive. SOFC service life can be extended by preventing chromium‐ (Cr‐) bearing species from evaporating from the interior surfaces of balance of plant (BOP) components and poisoning the cathode to increase the lifetime. We have developed yttria‐stabilized zirconia (YSZ) and aluminum oxide‐ (Al 2 O 3 ‐) modified sol‐gel paints or inks for coating BOP components. 430 stainless steel (430SS) substrates with three surface conditions were coated with the 0.8–1.5 µ m thick YSZ and Al 2 O 3 paints. The coated 430SS samples were tested for thermal cycling resistance, thermal soak, and Cr evaporation. Thermal soak and thermal cycling test results show promise for the YSZ‐coated 430SS substrates. The Cr evaporation test of a coated substrate showed a 51% reduction in Cr generation, when compared with a bare substrate.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Stable Diacid Coordinated Quaternary Ammonium Polymers for 80-230 °C Fuel Cells

Current automotive fuel cells that use sulfonated polymer-based proton exchange membranes are challenging to operate at > 100 °C without humidification. In this project, we developed polymer electrolyte fuel cells that run at > 100 °C without humidification using a novel class of proton exchange membranes made from thermos-oxidatively stable acid-coordinated quaternary ammonium polymers. These fuel cells remove the external humidifiers/demisters and reduce the size of radiators, thus vastly simplifying fuel cell integration, which increases tolerance to impurities and improves electrode kinetics of catalysts. Operating fuel cells without hydration has a significant benefit on fuel cell cost and economic feasibility was investigated by comparing existing fuel cell systems. This project bridges the scale-up process to manufacture the fuel cell component through the U.S. DOE L’Innovator project sponsored by the U.S. DOE Hydrogen and Fuel Cell Technologies Office (HFTO).

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2024

In-line, High-Throughput Quality Monitoring for Fuel Cell and Electrolyzer Components Based on Transmission and Reflection Imaging

During the manufacturing of fuel cell and electrolyzer membranes and membrane electrode assemblies (MEAs), real-time, in-line, high-throughput optical-based quality monitoring methods are essential for detecting defects and monitoring thickness variations, thus improving the performance and increasing the durability of fuel cell and electrolyzer in the hydrogen industry. For the MEAs with very opaque coatings, optical transmission-based imaging has been developed and applied in the Roll-to-Roll system using a flashlight and a high-sensitivity CCD camera. We observed high signal-to-noise ratio images while the Roll-to-Roll system ran at 5 ft/min. The entire sample image could quickly be recovered from the discrete frames using customized Python codes for automatic frame cropping and stitching. We detected significant non-uniformities in our experimental MEAs specimen. For fuel cell and low-temperature electrolysis (LTE) transparent membranes, we used optical reflectance hyperspectral imaging with interference fringe-based thickness mapping. We set up a hyperspectral camera to measure various rolls of commercial membranes. The measurement results are analyzed to find the thickness distribution of each roll and to check for defects. Transmission and reflection imaging-based quality monitoring techniques demonstrated in this project can be widely used in the mass production environment to improve the production yield and performance of hydrogen devices.

DIRECT ENERGY CONVERSION,ENGINEERING↗
DOE OSTI2021

Editors’ Choice—Diffusion Media for Cation Contaminant Transport Suppression into Fuel Cell Electrodes

Polymer electrolyte membrane fuel cells provide an alternative option to fossil fuel-based energy conversion devices. However, the corrosion of fuel cell components, specifically the bipolar plates, introduces contaminants (e.g., Fe, Ni) into the membrane electrode assembly (MEA). These contaminants accelerate the ionomer degradation by acting as a Fenton’s reagent, decreasing the fuel cell’s durability. This study presents the mechanism and the diffusion media properties affecting the transport of cation contaminants into the MEA. Cation contaminant transport was studied after altering the gas diffusion layers (GDLs) wettability, emulating the GDL properties after prolonged operation, by ex situ hydrogen peroxide treatment or in situ electrochemical potential cycling. A GDL with crack-free microporous layer (MPL) showed a lower cation transport rate to the catalyst layer than MPL with cracks after both ex situ and in situ treatment. A novel GDL was developed from modification of the conventional GDL via the addition of a hydrophobic layer to the GDL substrate, which suppressed the contaminant cation transport significantly. This novel GDL also showed improved fuel cell performance.

25 ENERGY STORAGE↗
DOE OSTI2022

AST Development in M2FCT (ASTWG and iDWG) Update to 21CTP [Slides]

Accelerated Stress Tests (ASTs) are required to evaluate fuel cell component durability in a reasonable time. Current DOE and FCTT ASTs are light duty focused with 5000 – 8000 hour durability requirements. Heavy duty ASTs need to reflect the 25000+ hour durability requirement. Interim solution is to extend the duration of the current light duty ASTs: Catalyst AST has been extended from 30,000 cycles to 90,000 cycles (From 50 hours to 150 hours). We need to understand Heavy duty stressors and tailor ASTs for heavy duty applications: Longer lifetimes; Higher efficiencies – Higher loadings - Potentially higher operating temperatures and voltages; Heat rejection during low speed hill climbs – Higher operating temperature; Longer Idling times – Higher operating voltages and drier operation; Take into account different hybridization strategies (Vary size of battery).

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

Low-Pressure Electrolytic Ammonia (LPEA) Production

The project goal was to advance and demonstrate the techno-economic viability of a low-pressure electrolytic ammonia (LPEA) process for producing ammonia from electricity, hydrogen, and nitrogen. The critical enabling technology of the LPEA process is a proton-conducting electrolyte (PCE) developed by EERC and North Dakota State University (NDSU) capable of high proton conductivity (at least 1×10 -2 [0.01] siemens/centimeter [S/cm]) at 200°–300°C. An affordable PCE that works at 200°–300°C has been a major goal of the global electrochemistry industry for over 25 years, because it would enable operation at temperatures high enough to prevent catalyst poisoning and simplify water management and low enough to avoid temperature-driven degradation of fuel cell components comprising materials with differing coefficients of thermal expansion. Also critical to LPEA performance is a cathode catalyst capable of ammonia synthesis at a rate of ≥1×10 -10 moles/second-cm 2 catalyst surface area (mol-s -1 cm -2 ) in screening tests conducted at room temperature, and 1×10 -7 mol-s -1 cm -2 at 200°–300°C for commercial viability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Viscous sealing glass compositions for solid oxide fuel cells

A sealant for forming a seal between at least two solid oxide fuel cell components wherein the sealant comprises a glass material comprising B.sub.2O.sub.3 as a principal glass former, BaO, and other components and wherein the glass material is substantially alkali-free and contains less than 30% crystalline material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Membrane electrode assembly manufacturing process

Methods and compositions for making fuel cell components are described. In one embodiment, the method comprises providing a substrate, and forming or adhering an electrode on the substrate, wherein the forming includes depositing an aqueous mixture comprising water, a water-insoluble component, a catalyst, and an ionomer. The water-insoluble component comprises a water-insoluble alcohol, a water-insoluble carboxylic acid, or a combination thereof. The use of such water-insoluble components results in a stable liquid medium with reduced reticulation upon drying, reduced dissolution of the substrate, and reduced penetration of the pores of the substrate.

Edmundson, Mark↗