SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
We describe the Energetic Gamma Ray Experiment Telescope (EGRET) data products which we anticipate will suffice for virtually all guest and archival investigations. The production process, content, availability, format, and the associated software of each product is described. Supplied here is sufficient detail for each researcher to do analysis which is not supported by extant software.
The one point probability density function (PDF) method is examined in light of its use in actual engineering problems. The PDF method, although relatively complicated, appears to be the only format available to handle the nonlinear stochastic difficulties caused by typical reaction kinetics. Turbulence modeling, if it is to play a central role in combustion modeling, has to be integrated with the chemistry in a way which produces accurate numerical solutions to combustion problems. It is questionable whether the development of turbulent models in isolation from the peculiar statistics of reactant concentrations is a fruitful line of development as far as propulsion is concerned. There are three issues for which additional viewgraphs are prepared: the one point pdf method; the amplitude mapping closure; and a hybrid strategy for replacing a full two point pdf treatment of reacting flows by a single point pdf and correlation functions. An appeal is made for the establishment of an adequate data base for compressible flow with reactions for Mach numbers of unity or higher.
We describe the EGRET data products which we anticipate will suffice for virtually all guest and archival investigations. The production process, content, availability, format, and the associated software of each product is described. This paper also supplies sufficient detail for the archival researcher to do analysis which is not supported by extant software. Where published references don't exist, the EGRET team documentation is cited.
OVERVIEW A NASA Flight Medicine optometrist teamed with a human factors specialist to develop an electronic questionnaire for crewmembers to record their visual acuity test scores and perceived vision assessment. It will be implemented on the International Space Station (ISS) and administered as part of a suite of tools for early detection of potential vision changes. The goal of this effort was to rapidly develop a set of questions to help in early detection of visual (e.g. blurred vision) and/or non-visual (e.g. headaches) symptoms by allowing the ISS crewmembers to think about their own current vision during their spaceflight missions. PROCESS An iterative process began with a Space Shuttle one-page paper questionnaire generated by the optometrist that was updated by applying human factors design principles. It was used as a baseline to establish an electronic questionnaire for ISS missions. Additional questions needed for the ISS missions were included and the information was organized to take advantage of the computer-based file format available. Human factors heuristics were applied to the prototype and then they were reviewed by the optometrist and procedures specialists with rapid-turn around updates that lead to the final questionnaire. CONCLUSIONS With about only a month lead time, a usable tool to collect crewmember assessments was developed through this cross-discipline collaboration. With only a little expenditure of energy, the potential payoff is great. ISS crewmembers will complete the questionnaire at 30 days into the mission, 100 days into the mission and 30 days prior to return to Earth. The systematic layout may also facilitate physicians later data extraction for quick interpretation of the data. The data collected along with other measures (e.g. retinal and ultrasound imaging) at regular intervals could potentially lead to early detection and treatment of related vision problems than using the other measures alone.
Dr. Derek Sears, the editor of the journal Meteoritics and Planetary Science, has established a policy of having each issue of the journal contain an invited review of an area that he deems to be of special cur-rent importance. Typically 20 to 25 pages of the beginning of the journal are devoted to each review. He has asked me to prepare such a review summarizing what we know about the composition and structure of interstellar materials. The attached paper is the result. This is a good time for such a review since tremendous progress has been made in the field of interstellar dust in recent years through the use of telescopic observations, theoretical studies, laboratory studies of analogs, and the study of actual interstellar samples found in meteorites. It is increasing clear that the interstellar medium (ISM) contains an enormous diversity of materials created by a wide range of chemical and physical processes. This understanding is a far cry from the picture of interstellar materials held as recently as two decades ago, a picture which incorporated only a few generic types of grains and few molecules. In the paper I review our current knowledge of the more abundant materials thought to exist in the ISM. The review concentrates on matter in interstellar dense molecular clouds since it is the materials in these environments from which new stars and planetary systems are formed, although materials in circumstellar environments and in the diffuse ISM are also discussed. The paper focuses largely on solid materials since they contain a major fraction of the heavier elements in clouds and because solids are most likely to survive incorporation into new planetary systems in identifiable form. The paper concludes with discussion of some of the implications resulting from the identification of these interstellar materials. I also present some new thoughts, the most intriguing being that meteoritic 'microdiamonds' may be the same material that modelers of the interstellar extinction call graphite! If my suggestion is correct it will help resolve the dilemma associated with the current over-subscription of cosmic C and should lead to some new approaches to both extinction models and the study of meteoritic interstellar microdiamonds.
Explore the source record for details and available documents.
This presentation explains how to use the World Wide Web (WWW) to distribute scientific and technical information as hypermedia. WWW clients and servers use the HyperText Transfer Protocol (HTTP) to transfer documents containing links to other text, graphics, video, and sound. The standard language for these documents is the HyperText MarkUp Language (HTML). These are simply text files with formatting codes that contain layout information and hyperlinks. HTML documents can be created with any text editor or with one of the publicly available HTML editors or convertors. HTML can also include links to available image formats. This presentation is available online. The URL is http://sti.larc.nasa. (followed by) gov/demos/workshop/introtext.html.
The general purpose film plotting system which is a plot program design to handle a majority of the data tape formats presently available under OS/360 was discussed. The convenience of this program is due to the fact that the user merely describes the format of his data set and the type of data plots he desires. It processes the input data according to the given specifications. The output is generated on a tape which yields data plots when processed by the selected plotter. A summary of each job is produced on the printer.
TES Product File Reader software extracts data from publicly available Tropospheric Emission Spectrometer (TES) HDF (Hierarchical Data Format) product data files using publicly available format specifications for scientific analysis in IDL (interactive data language). In this innovation, the software returns data fields as simple arrays for a given file. A file name is provided, and the contents are returned as simple IDL variables.
A data user's note is presented which announces the availability of the complete set of Apollo 11 pictorial data and aids investigators in the selection of Apollo 11 photographs for study. In addition, this note provides guidance in the interpretation of the photographs. As background information, brief descriptions of the Apollo 11 mission objectives, photographic equipment, and photographic coverage and quality are included. The National Space Science Data Center (NSSDC) can provide all forms of photographs described in the section on format of available data.
This study uses measurements of radiation and cloud properties taken between January and August 1998 by three Tropical Rainfall Measuring Mission (TRMM) instruments, the Clouds and the Earth's Radiant Energy System (CERES) scanner, the TRMM Microwave Imager (TMI), and the Visible and InfraRed Scanner (VIRS), to evaluate the variations of tropical deep convective systems (DCS) with sea surface temperature (SST) and precipitation. This study finds that DCS precipitation efficiency increases with SST at a rate of approx. 2%/K. Despite increasing rainfall efficiency, the cloud areal coverage rises with SST at a rate of about 7%/K in the warm tropical seas. There, the boundary layer moisture supply for deep convection and the moisture transported to the upper troposphere for cirrus-anvil cloud formation increase by approx. 6.3%/K and approx. 4.0%/K, respectively. The changes in cloud formation efficiency, along with the increased transport of moisture available for cloud formation, likely contribute to the large rate of increasing DCS areal coverage. Although no direct observations are available, the increase of cloud formation efficiency with rising SST is deduced indirectly from measurements of changes in the ratio of DCS ice water path and boundary layer water vapor amount with SST. Besides the cloud areal coverage, DCS cluster effective sizes also increase with precipitation. Furthermore, other cloud properties, such as cloud total water and ice water paths, increase with SST. These changes in DCS properties will produce a negative radiative feedback for the earth's climate system due to strong reflection of shortwave radiation by the DCS. These results significantly differ from some previous hypothesized dehydration scenarios for warmer climates, and have great potential in testing current cloud-system resolving models and convective parameterizations of general circulation models.
The retrieval command subsystem reference manual for the NASA Aerospace Safety Information System (NASIS) is presented. The output oriented classification of retrieval commands provides the user with the ability to review a set of data items for verification or inspection as a typewriter or CRT terminal and to print a set of data on a remote printer. Predefined and user-definable data formatting are available for both output media.
A 36 bit time code generator implemented in CMOS is described. A microprocessor is used to minimize chip count. A modified 20 second format is available as an option, by changing two program steps.
The paper presents kinetic studies on the reaction of elongation of the 3-prime-5-prime-linked ribooligoguanylates with guanosine 5-prime-phospho-2-methylimidazolide (2-MelmpG) in the presence or absence of a complementary template, the polycytidylic acid. In the absence of poly(C), the reaction leads to three isomeric oligomers that are elongated by one monomer unit: the 3-prime-5-prime linked, the 2-prime-5-prime linked, and the pyrophosphate, formed in a ratio of 1:2:5. In the presence of the template, the reaction is 20-fold faster and yields products (n + 1), (n + 2), (n + 3), etc., as long as 2-MelmpG is available. The formation of the natural, 3-prime-5-prime-linked isomer, is enhanced selectively by 140-fold at 37 C, and its relative yield increases with decreasing temperature.
Satellite data for climate monitoring have become increasingly important over the past decade, especially with increasing concern for inadvertent antropogenic climate change. Although most satellite based data are of short record, satellites can provide the global coverage that traditional meteorological observations network lack. In addition, satellite data are invaluable for the validation of climate models, and they are useful for many diagnostic studies. Herein, several satellite data sets were processed and transposed into 'history tape' format for use with the Community Climate Model (CCM) modular processor. Only a few of the most widely used and best documented data sets were selected at this point, although future work will expand the number of data sets examined as well as update the archived data sets. An attempt was made to include data of longer record and only monthly averaged data were processed. For studies using satellite data over an extended period, it is important to recognize the impact of changes in instrumentation, drift in instrument calibration, errors introduced by retrieval algorithms and other sources of errors such as those resulting from insufficient space and/or time sampling.
Seafloor hydrothermal systems may be the most likely locations on the early Earth for the emergence of life. Because of the disequilibrium inherent in such dynamic, mixing environments, abundant chemical energy would have been available for formation of the building blocks of life. In addition, theoretical studies suggest that organic compounds in these conditions would reach metastable states, due to kinetic barriers to the formation of stable equilibrium products (CO2 and methane). The speciation of organic carbon in metastable states is highly dependent on the oxidation state, pH, temperature, pressure and bulk composition of the system. The goal of our research is to investigate the effects of a number external variables on the formation, transformation, and stability of organic compounds at hydrothermal conditions. We have begun experimental work to attempt to control the oxidation state of simulated hydrothermal systems by using buffers composed of mineral powders and gas mixtures. We are also beginning to test the stability of organic compounds under these conditions. The experiments are being performed using the hydrothermal bomb apparatus at the U.S. Geological Survey in Menlo Park, CA and the supercritical water oxidizer (SCWO) at NASA Ames Research Center in Moffet Field, CA. The amino acids decomposed rapidly. Even after the approximately 15 minutes between addition of the amino acids and the first sampling, no amino acids were detected in the PPM system by GC- MS, while in the FeFeO system the amino acids were present at a level of less than 50% of original. Carboxylic acids, ammonia, and CO2 were the main products, along with some unidentified compounds. The ratios of carboxylic acids and concentrations of other products seem to have remained stable during the experiments, consistent with observations of other metastable systems and theoretical predictions.
The results of the investigation were presented at a Astrobiology Institute General Meeting. Seafloor hydrothermal systems may be the most likely locations on the early Earth for the emergence of life. Because of the disequilibrium inherent in such dynamic, mixing environments, abundant chemical energy would have been available for formation of the building blocks of life. In addition, theoretical studies suggest that organic compounds in these conditions would reach metastable states, due to kinetic barriers to the formation of stable equilibrium products (CO2 and methane). The speciation of organic carbon in metastable states is highly dependent on the oxidation state, pH, temperature, pressure and bulk composition of the system. The goal of our research is to investigate the effects of a number external variables on the formation, transformation, and stability of organic compounds at hydrothermal conditions. We have begun experimental work to attempt to control the oxidation state of simulated hydrothermal systems by using buffers composed of mineral powders and gas mixtures. We are also beginning to test the stability of organic compounds under these conditions.
This paper compares the specific properties of the X and C band data sets with respect to global coverage, height accuracy, sensor specific errors, product definition, product format and availability.