Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “formaldehyde”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Engineered Methylobacterium extorquens grows well on methoxylated aromatics due to its formaldehyde metabolism and stress response

ABSTRACT Lignin is a vast yet underutilized source of renewable energy. The microbial valorization of lignin is challenging due to the toxicity of its degradation intermediates, particularly formaldehyde. In this study, we engineeredMethylobacterium extorquensPA1 to metabolize lignin-derived methoxylated aromatics, vanillate (VA) and protocatechuate (PCA), by introducing thevanandpcagene clusters. Compared toPseudomonas putida,M. extorquensPA1 exhibited better formaldehyde detoxification, enabling robust growth on VA without accumulation of formaldehyde. Genetic analyses confirmed that formaldehyde oxidation and stress response systems, rather than C 1 assimilation, were important for VA metabolism. Additionally, VA and PCA were found to disrupt membrane potential, contributing to their inherent toxicity. Our findings establishM. extorquensPA1 as a promising chassis for lignin valorization and provide a framework for engineering formaldehyde-resistant microbial platforms. IMPORTANCE In developing biotechnological solutions for a circular economy, it is critical to valorize all parts of renewable resources, such as lignocellulose from vegetative components of agricultural crops and from bioenergy feedstocks. After chemical breakdown, the aromatics arising from lignin present significant challenges for use due to their toxicity. Here, we address one component of this challenge—the methoxy groups that get released as formaldehyde—and show that existing biotechnological platform organisms with strong formaldehyde metabolism, such asMethylobacterium extorquens, can be transformed into highly capable utilizers of methoxylated aromatics.

Microbiology↗
DOE OSTI2026

Room-Temperature Methane Oxidation to Formaldehyde Mediated by CoMoO + Gas-Phase Cations

Formaldehyde (HCHO) is a fundamental chemical feedstock with widespread industrial applications. The direct oxidation of methane by oxygen to formaldehyde (CH 4 + 1/2O 2 → H 2 + HCHO) under mild conditions represents an attractive but challenging transformation, as it requires both activation of the inert C–H bonds of CH 4 and suppression of overoxidation to products such as carbon dioxide. In this work, mass spectrometry experiments combined with theoretical calculations reveal that CoMoO + cations can efficiently mediate this transformation at room temperature. The unique electronic structure of CoMoO + facilitates the formation of a crucial CoMoOCH 2 + intermediate during the reaction with CH 4 and prevents methanol formation. In the subsequent oxidation reaction, the Mo atom in CoMoO + serves as the active site for O 2 adsorption, and both Mo and Co atoms act as electron donors to activate O 2 , leading to the formation of the C–O bond in formaldehyde. This work reports the first gas-phase example of achieving conversion of CH 4 to HCHO and its radical derivatives by O 2 at room temperature using heteronuclear non-noble metal cations. Remarkably, the CoMoOCH 2 + cation maintains high reactivity after adsorbing one or two CH 4 molecules. Finally, these findings provide new mechanistic insights into selective methane activation and conversion.

aldehydes↗
DOE OSTI2024

Enhanced CO 2 Adsorption Capacity in Highly Porous Carbon Materials Derived from Melamine-Formaldehyde Resin

Here, the present study explores the synthesis of N-doped carbon materials with large surface porosity using commercial melamine-formaldehyde resin as the precursor and KOH as the activator. The resin was carbonized first and then activated by KOH with varying KOH amount and activation temperature. Notably, the as-obtained sorbents display advanced porosity with the highest surface area and pore volume of 1591 m 2 /g and 0.74 cm 3 /g, respectively, along with high N content ranging from 6.43 to 18.34 wt %. Remarkably, maximum CO 2 capture amounts of 5.42 and 3.52 mmol/g were accomplished at 0 and 25 degrees C, 1 bar for as-synthesized carbons. Systematic studies point out that narrow microporosity is the major factor determining the CO 2 uptake of these carbons under ambient pressure. Furthermore, these sorbents display notable CO 2 selectivity, rapid adsorption kinetics, moderate heat of adsorption, substantial dynamic CO 2 capture capacity, and stable recyclability. These results underscore the potential of melamine-formaldehyde resin-derived N-doped porous carbon as an efficient and versatile adsorbent for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A formaldehyde and nitrogen dioxide toxics monitor for environmental justice

DOE’s Integrated Field Laboratories (IFLs) require a vast array of measurements to measure urban air quality. Nitrogen dioxide (NO2) and formaldehyde (HCHO) are ubiquitous pollutants with numerous sources, most notably vehicle exhaust. High-spatial density measurements are critical to understanding how certain neighborhoods are more adversely impacted by pollutants. This report describes the results of a Phase I SBIR project to develop and demonstrate a rapid, affordable, low-power monitor to provide high spatial resolution mobile measurements of formaldehyde and nitrogen dioxide at street-level, where people live and walk. The spatial density will be achieved via rapid measurements on a mobile platform. This sensor will quantify spatial disparities in cities of the toxics, HCHO and NO2, as well as carbon monoxide and carbon dioxide for better source identification. These species are detected in the mid infrared by laser absorption spectroscopy, and fiberoptics are used. Tasks accomplished include identification and testing of the appropriate spectroscopic regions; coupling of laser light into a fiberoptic system; development of software to control miniature electronics to scan and control two lasers simultaneously; coupling of the mid infrared fiber into a multipass cell for enhanced pathlength and sensitivity; characterization of sources of instrument noise; and design work for a Phase II prototype.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Enhanced electrochemical performance and extended cycling of resorcinol-formaldehyde derived N-doped carbon xerogel for alkali metal-ion (Li/Na/K) batteries

Resorcinol formaldehyde-derived carbon xerogel (RFC) is a versatile material with tuneable properties, synthesized through a simple sol-gel method. This study presents nitrogen-doped RF carbon xerogel (N-RFC) with 11.8 at% nitrogen doping, offering a microporous architecture ideal for alkali metal-ion (Li, Na, K) batteries. The porous N-doped framework enhances electrochemical performance by improving ion transport, increasing active storage sites, and significantly boosting metal-ion adsorption, particularly through pyrrolic nitrogen, as revealed by first-principles calculations supported by XPS analysis. N-RFC anodes showed excellent cycling stability, high-capacity retention, and fast charge/discharge capabilities, rendering them suitable for commercial applications. Notably, the N-RFC anode demonstrates high-rate long-term cycling stability, retaining its capacity of 83.5 % (188 mAh/g at 2 C-rate) and 50 % (133 mAh/g at 1250 mA/g) over 1000 cycles for Li and Na-ion batteries, respectively, favorable for commercial battery applications. Additionally, N-RFC demonstrates a reversible capacity of 120 mAh/g after 394 cycles with a retention of 82 % for K-ion batteries. The ability of the material to accommodate larger ions like Na + and K + further emphasizes its versatility and potential application in diverse alkali metal-ion battery systems.

25 ENERGY STORAGE↗
DOE OSTI2026

Flame stabilization in DME spray flames under engine-relevant conditions characterized by OH* chemiluminescence and formaldehyde laser-induced fluorescence

The transient and quasi-steady flame structures of Dimethyl Ether (DME) fuel sprays, produced by a single-hole injector (Spray D), were investigated using Planar Laser-Induced Fluorescence (PLIF) and chemiluminescence imaging in a constant-volume chamber under Engine Combustion Network (ECN) Spray A conditions (900 K ambient temperature, 60 bar ambient pressure, 1500 bar injection pressure, and 22.8 kg/m 3 ambient density). Low-temperature chemical reaction zones were visualized using formaldehyde (CH 2 O) PLIF with 355 nm excitation, while high-temperature flame regions were captured via chemiluminescence imaging of excited-state hydroxyl radicals (OH*). Both transient and quasi-steady flame structures clearly show the transition from CH 2 O to OH*, highlighting the progression from low- to high-temperature combustion, while the position of the flame is displaced for DME compared to reference hydrocarbon n-dodecane. Homogeneous reactor calculations with detailed chemistry and using adiabatic mixing for initial temperature show that CH 2 O peaks are significantly higher for DME at the same equivalence ratio, with a higher heat-release during the cool-flame regime with respect to the fuel heating value. Thus, the cool-flame dynamic as a precursor to high-temperature combustion and flame stabilization exhibit distinct behavior for DME relative to conventional hydrocarbons, and these phenomena are effectively resolved through the soot-free nature of DME and the high-speed, time-resolved diagnostics.

CH2O laser-induced fluorescence↗
DOE OSTI2025

Ampere-level co-electrosynthesis of formate from CO 2 reduction paired with formaldehyde dehydrogenation reactions

Current catalysts face challenges with low formate selectivity at high current densities during the CO 2 electroreduction. Here, we showcase a versatile strategy to enhance the formate production on p-block metal-based catalysts by incorporating noble metal atoms on their surface, refining oxygen affinity, and tuning adsorption of the critical oxygen-bound *OCHO intermediate. The formate yield is observed to afford a volcano-like dependence on the *OCHO binding strength across a series of modified catalysts. The rhodium-dispersed indium oxide (Rh/In 2 O 3 ) catalyst exhibits impressive performances, achieving Faradaic efficiencies (FEs) of formate exceeding 90% across a broad current density range of 0.20 to 1.21 A cm −2 . In situ Raman spectroscopy and theoretical calculations reveal that the oxophilic Rh site facilitates *OCHO formation by optimizing its adsorption energy, placing Rh/In 2 O 3 near the volcano-shaped apex. A bipolar electrosynthesis system, coupling the CO 2 reduction at the cathode with the formaldehyde oxidative dehydrogenation at the anode, further boosts the FE of formate to nearly 190% with pure hydrogen generation under an ampere-level current density and a low cell voltage of 2.5 V in a membrane electrode assembly cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Electrochemically mediated disproportionation for selective formaldehyde upcycling in acid

Formaldehyde (FA) electrolysis is attractive for paired production of value‑added chemicals. However, conventional electrolysis adopts alkaline electrolytes, which triggers FA self-disproportionation and severe feed loss. Here we introduce a sustainable and selective strategy for valorizing FA through electrochemically mediated disproportionation in acidic electrolytes. By leveraging a dual-electrode system consisting of a hydrophobic copper tetraminophthalocyanine layer (CuTAPc-layer) cathode and a Pt 2 Ru bimetallic anode, we efficiently convert FA into methanol and formic acid at high Faradaic efficiencies of 93.2% and 91.3%, respectively. Compared with alkaline FA oxidation, which can lose up to 76% FA and complicate downstream separation, the acidic system suppresses side reactions to ensure high product purity. Mechanism studies reveal that the hydrophobic microenvironment of CuTAPc-layer suppresses hydrogen evolution, while the stronger oxophilicity of Pt 2 Ru enhances FA activation and lowers the key deprotonation barrier for FA oxidation. The integrated device demonstrates application potential in polyoxymethylene upgrading, delivering 374.2 mA at 4 V with ~90% single-pass conversion, establishing a scalable and eco-friendly electrochemical pathway for chemical upcycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of chemical production and depositional losses on formaldehyde in the Community Regional Atmospheric Chemistry Multiphase Mechanism (CRACMM)

Abstract. Formaldehyde (HCHO) is an important air pollutant with direct cancer risk and ozone-forming potential. HCHO sources are complex because HCHO is both directly emitted and produced from oxidation of most gas-phase reactive organic carbon. We update the secondary production of HCHO in the Community Regional Atmospheric Chemistry Multiphase Mechanism (CRACMM) in the Community Multiscale Air Quality (CMAQ) model. Production of HCHO from isoprene and monoterpenes is increased, correcting an underestimate in the current version. Simulated June–August surface HCHO during peak photochemical production (11:00–15:00 LT, local time) increased by 0.6 ppb (32 %) over the southeastern USA and by 0.2 ppb (13 %) over the contiguous USA. The increased HCHO compares more favorably with satellite-based observations from the TROPOspheric Monitoring Instrument (TROPOMI) and from aircraft-based observations. Evaluation against hourly surface observations indicates a missing nighttime sink that can be improved by increased nighttime deposition, which reduces June–August nocturnal (20:00–04:00 LT) surface HCHO by 1.1 ppb (36 %) over the southeastern USA and 0.5 ppb (29 %) over the contiguous USA. The ability of CRACMM to capture peak levels of HCHO at midday is improved, particularly at sites in the northeastern USA, while peak levels at sites in the southeastern USA are improved, although still lower than observed. Using established risk assessment methods, lifetime exposure of the population in the contiguous USA (∼ 320 million) to ambient HCHO levels predicted here may result in 6200 lifetime cancer cases, with 40 % from controllable anthropogenic emissions of nitrogen oxides and reactive organic compounds. Chemistry updates will be available in CRACMM version 2 (CRACMM2) in CMAQv5.5.

Skipper, T. Nash↗
DOE OSTI2026

Restricted Partition Function Semiclassical Transition State Theory (RPF-SCTST): Applications to Reactions Involving Hydrogen Cyanide, Hydrogen Peroxide, and Formaldehyde Oxide

We demonstrate the efficiency of the numerical calculation of thermal semiclassical transition state theory (SCTST) rates across several representative chemical reactions using the restricted partition function (RPF)─viz a function that depends only on the imaginary action associated with a reaction. Here, we treat the potential energy surfaces (PESs) through fourth order expansions around the saddle point and integrate the Hamiltonian up to second order in employing vibrational perturbation theory. We apply this formalism to uni- and bimolecular reactions with different─though relatively high─barrier heights to uncover the influence of the barrier properties, minimal energies, and separability of the rotational motion on rate constants and tunneling corrections. Although all modes are coupled within the RPF, we found in our numerical examples that the rotational component in the absence of significant rotational distortions can be separated from the vibrational contributions. Moreover, a classical treatment of the rotational contribution is adequate over the temperature range from approximately 100 to 1000 K. We also found that the choice of DFT basis set can lead to variations in rate constants of up to an order of magnitude. Lastly, different schemes for counting eligible energy levels result in rate constants that differ by no more than a factor of 2, with the remaining discrepancies attributed to the treatment of near-convergent levels in perturbation theory.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Methanol Partial Oxidation on Cu(111) and PtCu(111) Single-Atom Alloy Surfaces: Effect of Surface Oxygen Coverage on Selectivity

The selective oxidation of methanol to formaldehyde on Cu surfaces is an important and well-studied reaction. However, a systematic analysis of product selectivity as a function of oxygen coverage on Cu(111) and Cu-based single-atom alloys (SAAs) has not been previously reported. In this work, we present a comprehensive investigation of deuterated methanol (CD 3 OH) partial oxidation on Cu(111) and 1% PtCu(111) SAA surfaces as a function of preadsorbed oxygen coverage. Temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) reveal that isolated Pt atoms inhibit the initial surface oxidation of Cu(111) under low oxygen exposures. Despite this difference in oxidation kinetics, the product selectivity remains largely unaffected: on both Cu(111) and PtCu(111), formaldehyde (CD 2 O) is the predominant partial oxidation product over a broad range of oxygen coverages. The selectivity toward formaldehyde peaks at intermediate oxygen coverages (∼0.3 monolayers, ML), indicating the existence of an optimal oxygen loading for partial oxidation. Notably, the similar product selectivities on Cu(111) and PtCu(111) over a range of surface oxygen coverage indicate that Pt single atoms do not significantly alter the reaction pathway or shift the optimal oxygen coverage for formaldehyde formation. Control experiments confirm that Cu(111) is unreactive toward methanol in the absence of oxygen, while PtCu(111) surfaces produce a small amount of formaldehyde even when oxygen is not preadsorbed, indicating that isolated Pt atoms facilitate O−H activation at below 150 K, leading to H 2 desorption, followed by C−D activation at higher temperatures (∼350 K). Density functional theory (DFT)-based calculations show that Pt atoms increase the O 2 dissociation barrier relative to Cu(111), consistent with the observed inhibition of oxidation at low exposures. Overall, this work provides the first detailed selectivity map for methanol oxidation on oxidized Cu(111) and PtCu(111) SAA surfaces. By linking classical mechanistic insights such as methoxy- and formate-mediated pathways with single-atom alloy catalyst design, this work demonstrates that while Pt substitution modulates the oxidation kinetics and oxygen binding, the overall selectivity toward formaldehyde is governed primarily by oxygen coverage. These findings underscore the potential of isolated dopants to tune surface oxidation behavior without compromising the intrinsic partial oxidation selectivity of copper-based catalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Low-voltage syngas synthesis via BPM electrolysis of CO 2 capture and aldehyde solution

A bipolar membrane electrolyzer coupling bicarbonate electrolysis with formaldehyde oxidation directly produces syngas (H 2 : CO = 1) at 1.7 V and 200 mA cm −2 with 200% combined Faradaic efficiency. We demonstrate an electrochemical syngas production platform that couples bicarbonate electrolysis with formaldehyde oxidation in a bipolar membrane electrode assembly. This strategy doubles syngas (CO + H 2 ) throughput compared to conventional CO 2 electrolysis by generating CO at the cathode and H 2 at the anode. The system achieves a full-cell voltage of 1.7 V while operating at an industrially relevant current density of 200 mA cm −2 . The system maintained a combined Faradaic efficiency of 200% over 8 hours. The process produces syngas with a 1 : 1 H 2 : CO ratio, aligning with downstream requirements for Fischer–Tropsch synthesis. We further investigated how Cu anode active sites and electrolyte composition affect formaldehyde oxidation activity. Our integrated electrolytic system reduces levelized energy by 45–61% relative to conventional electrochemical syngas production platforms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Modification and analysis of context-specific genome-scale metabolic models: methane-utilizing microbial chassis as a case study

ABSTRACT Context-specific genome-scale model (CS-GSM) reconstruction is becoming an efficient strategy for integrating and cross-comparing experimental multi-scale data to explore the relationship between cellular genotypes, facilitating fundamental or applied research discoveries. However, the application of CS modeling for non-conventional microbes is still challenging. Here, we present a graphical user interface that integrates COBRApy, EscherPy, and RIPTiDe, Python-based tools within the BioUML platform, and streamlines the reconstruction and interrogation of the CS genome-scale metabolic frameworks via Jupyter Notebook. The approach was tested using -omics data collected for Methylotuvimicrobium alcaliphilum 20Z R , a prominent microbial chassis for methane capturing and valorization. We optimized the previously reconstructed whole genome-scale metabolic network by adjusting the flux distribution using gene expression data. The outputs of the automatically reconstructed CS metabolic network were comparable to manually optimized i IA409 models for Ca-growth conditions. However, the CS model questions the reversibility of the phosphoketolase pathway and suggests higher flux via primary oxidation pathways. The model also highlighted unresolved carbon partitioning between assimilatory and catabolic pathways at the formaldehyde-formate node. Only a very few genes and only one enzyme with a predicted function in C1 metabolism, a homolog of the formaldehyde oxidation enzyme ( fae1-2 ), showed a significant change in expression in La-growth conditions. The CS-GSM predictions agreed with the experimental measurements under the assumption that the Fae1-2 is a part of the tetrahydrofolate-linked pathway. The cellular roles of the tungsten (W)-dependent formate dehydrogenase ( fdhAB ) and fae homologs ( fae1-2 and fae3 ) were investigated via mutagenesis. The phenotype of the f dhAB mutant followed the model prediction. Furthermore, a more significant reduction of the biomass yield was observed during growth in La-supplemented media, confirming a higher flux through formate. M. alcaliphilum 20Z R mutants lacking fae1-2 did not display any significant defects in methane or methanol-dependent growth. However, contrary to fae1, the fae1-2 homolog failed to restore the formaldehyde-activating enzyme function in complementation tests. Overall, the presented data suggest that the developed computational workflow supports the reconstruction and validation of CS-GSM networks of non-model microbes. IMPORTANCE The interrogation of various types of data is a routine strategy to explore the relationship between genotype and phenotype. An efficient approach for integrating and cross-comparing experimental multi-scale data in the context of whole-genome-based metabolic network reconstruction becomes a powerful tool that facilitates fundamental and applied research discoveries. The present study describes the reconstruction of a context-specific (CS) model for the methane-utilizing bacterium, Methylotuvimicrobium alcaliphilum 20Z R . M. alcaliphilum 20Z R is becoming an attractive microbial platform for the production of biofuels, chemicals, pharmaceuticals, and bio-sorbents for capturing atmospheric methane. We demonstrate that this pipeline can help reconstruct metabolic models that are similar to manually curated networks. Furthermore, the model is able to highlight previously overlooked pathways, thus advancing fundamental knowledge of non-model microbial systems or promoting their development toward biotechnological or environmental implementations.

Kulyashov, M. A.↗
DOE OSTI2024

Wildland Urban Interface (WUI) Emissions: Laboratory Measurement of Aerosol and Trace Gas from Combustion of Manufactured Building Materials

Wildfires are increasing in intensity and more often threatening the wildland urban interface (WUI) where buildings and homes coexist with the natural environment. WUI emissions have not been as well-studied as emissions from vegetation. Thus, there is a need to quantify the emissions of building materials used in home construction under flaming and smoldering conditions to study their impacts to human health, visibility, air quality, and climate. Here, in a controlled laboratory setting, we quantify emissions of aerosols and trace gases including formaldehyde, particulate matter, and black carbon. We focus on the combustion of traditional single-source wood-based construction fuels. Our results indicate that, similar to natural fuels, the aerosol optical properties were more related to combustion conditions than the fuel type. Overall, we observed significant variability in the gas and particle emissions. Consistent trends include high formaldehyde (HCHO) and carbon monoxide (CO) emissions for smoldering conditions and higher carbon dioxide (CO 2 ), nitrogen oxides (NO x ), and black carbon for flaming conditions. Finally, these observations highlight the need to better characterize emissions for materials in the built environment to assess large-scale climate and human health impacts of fires at the WUI.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Thiohalorhabdus methylotropha sp. nov., an extremely halophilic autotrophic methylotiotroph from hypersaline lakes

So far, there have been no reports of trimethylamine (TMA)-utilizing extremely halophilic microorganisms in hypersaline habitats. Our aerobic enrichments at 4 M total Na + with 5 mM TMA inoculated with surface sediments from hypersaline soda (at pH 9.5) or chloride-sulfate (at pH 7) lakes in southwestern Siberia were successful only for the latter. The initial enrichment included both bacteria and haloarchaea but only the bacterial component was able to grow as a pure culture with TMA. Strain Cl-TMA forms a new-species lineage within the genus Thiohalorhabdus which includes extremely halophilic and obligate lithoautotrophic sulfur-oxidizing gammaproteobacteria. Cl-TMA can grow methyloautotrophically utilizing TMA, dimethylamine (DMA) and methanol (MeOH) as the electron donors or chemolithoautotrophically with thiosulfate. Mixotrophic growth was also observed with the three methyl compounds and thiosulfate. Carbon is assimilated autotrophically via the Calvin-Benson-Basham pathway. Unlike the type species of Thiohalorhabdus, T. denitrificans , Cl-TMA was incapable of anaerobic growth via denitrification. The isolate belongs to extreme halophiles growing between 2.5 and 5 M NaCl with an optimum at 3–3.5 M. Genome analysis identified two gene clusters coding for PQQ-dependent methanol dehydrogenases (MxaFI and XoxF), four homologues of the formaldehyde activating enzymes (Faes), a TMA/DMA oxidation locus, and two cluster of genes encoding an N-methylglutamate dehydrogenase pathway (NMGP) for methylamine oxidation. The first steps of C 1 -subtrate conversions are followed by the tetrahydrofolate (THF)-linked and tetrahydromethanopterin (H4MPT)-linked formaldehyde oxidation pathways and two formate dehydrogenases. All of those signatures of methylotrophy were absent in T. denitrificans . In contrast, genes for two key sulfur oxidation enzymes, thiosulfate dehydrogenase TsdAB and sulfide dehydrogenase FccAB, that are present in the type species are missing in Cl-TMA. Thiosulfate is oxidized to sulfate by a combination of an incomplete Sox cycle and an sHdr system. Strain Cl-TMA T (JCM 35977 = UQM 41915) is proposed to be classified as Thiohalorhabdus methylotrophus sp. nov.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Photocatalytic Methanol Dehydrogenation with Switchable Selectivity

Switchable selectivity achieved by altering reaction conditions within the same photocatalytic system offers great advantages for sustainable chemical transformations and renewable energy conversion. In this study, we investigate an efficient photocatalytic methanol dehydrogenation with controlled selectivity by varying the concentration of nickel cocatalyst, using zinc indium sulfide nanocrystals as a semiconductor photocatalyst, which enables the production of either formaldehyde or ethylene glycol with high selectivity. Control experiments revealed that formaldehyde is initially generated and can either serve as a terminal product or intermediate in producing ethylene glycol, depending on the nickel concentration in the solution. Mechanistic studies suggest a unique role of ionic nickel as an additional photoelectron competitor that can significantly influence selectivity, alongside its well-established function as a hydrogen evolution reaction cocatalyst under photocatalytic conditions. The demonstrated switchable selectivity provides a new tool for producing diverse products from methanol, while advancing the understanding of cocatalyst behavior for versatile catalytic performance.

Luo, Jie↗
DOE OSTI2025

Multistep catalytic abiotic CO2 conversion to sugars through C1 intermediates

Carbon dioxide (CO2) to multicarbon (Cn) upgrading for commodity chemicals, fuel production, or artificial food synthesis using renewable energy input is a golden target for researchers in sustainable carbon emission reduction. Here, we explore and analyze a flexible modular roadmap for the task, utilizing sequential electro-, photo-, and organocatalysis to develop a strategy for CO2 conversion using the key and elusive formaldehyde precursor of interest for sugar generation. We study the electrochemical carbon dioxide reduction reaction to methanol in a flow cell and its discontinuous photooxidation to formaldehyde (PMOR) with excellent selectivity. Utilizing a highly active N-heterocyclic carbene catalyst enables tunable generation of C4-C6 aldoses without undesirable byproducts, with carbon conversion yield reaching 60 to 80% for desired pentose, tetrose, and triose product mixtures and over 20% for hexose. This approach presents a roadmap for CO2 valorization, aiming to bridge carbon waste streams with sustainable sugar synthesis and opening broad avenues for green chemical production.

CO2 valorization↗