Sieved mass and shape data from simulated fluvial transport of icy clasts in the Titan Tumbler
Explore the source record for details and available documents.
Anthony D. Maue↗
SEARCH · Engineering Papers
Results for “fluvial transport”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
How Much of the Sediment in Gale Crater's Central Mound Was Fluvially Transported?
Explore the source record for details and available documents.
Bradley J. Thomson↗
Dominance of Particulate Mercury in Stream Transport and Rapid Watershed Recovery from Wildfires in Northern California, USA
Frequency and intensity of wildfires are expected to increase due to climate change, especially in areas with a long summer drought. Forests are a major sink for the global pollutant mercury (Hg), and fluvial transport of Hg from recently burned watersheds has not been widely investigated. Here, we examined two years of fluvial transport of Hg and its speciation (total Hg, methyl-Hg, particulate, and dissolved forms) under storm events and baseflow in two recently burned watersheds with different burned proportions and one nonburned reference watershed in the Coastal Ranges of northern California. We examined postfire storm-event transport of Hg and its methylated form (methyl-Hg), addressed the importance of the “initial runoff pulse” to postfire Hg fluvial transport and its predominant association with suspended solids, and elucidated potential sources of Hg exports from the burned landscapes using geochemical indicators, which suggested that ash materials were likely the significant sources of particulates in the first high-flow season postfire but not subsequently. The maximum total suspended solid and total Hg levels in the “first pulse” at the severely burned watershed were 442 and 46 times higher, respectively, than those at the reference watershed. Stream suspended solid and Hg levels declined substantially in the burned watersheds after just a few months of rainfall likely due to the rapid regrowth of vegetation commonly observed in postfire landscapes, implying that the wildfire effects on immediate Hg inputs from the burned landscape are at most transient in nature.
54 ENVIRONMENTAL SCIENCES↗
A Photographic Atlas of Rock Breakdown Features in Geomorphic Environments
A primary goal of geomorphological enquiry is to make genetic associations between process and form. In rock breakdown studies, the links between process, inheritance and lithology are not well constrained. In particular, there is a need to establish an understanding of feature persistence. That is, to determine the extent to which in situ rock breakdown (e.g., aeolian abrasion or salt weathering) masks signatures of earlier geomorphic transport processes (e.g., fluvial transport or crater ejecta). Equally important is the extent to which breakdown during geomorphic transport masks the imprint of past weathering. The use of rock features in this way raises the important question: Can features on the surface of a rock reliably indicate its geomorphic history? This has not been determined for rock surfaces on Earth or other planets. A first step towards constraining the links between process, inheritance, and morphology is to identify pristine features produced by different process regimes. The purpose of this atlas is to provide a comprehensive image collection of breakdown features commonly observed on boulders in different geomorphic environments. The atlas is intended as a tool for planetary geoscientists and their students to assist in identifying features found on rocks on planetary surfaces. In compiling this atlas, we have attempted to include features that have formed 'recently' and where the potential for modification by another geomorphic process is low. However, we acknowledge that this is, in fact, difficult to achieve when selecting rocks in their natural environment. We group breakdown features according to their formative environment and process. In selecting images for inclusion in the atlas we were mindful to cover a wide range of climatic zones. For example, in the weathering chapter, clast features are shown from locations such as the hyper-arid polar desert of Antarctica and the semi-arid canyons of central Australia. This is important as some features (e.g., alveoli) occur across climate regimes. We have drawn on the published geomorphological literature and our own field experience. We use, where possible, images of extrusive igneous rocks as the data returned from Mars, Venus and the Moon indicates that this is the predominant rock type. One of the purposes of this atlas is to expand the range of surface features that are known to indicate a particular geomorphic environment or process history. The surface features on boulders in some environments such as aeolian and weathering are well understood. In contrast, those in fluvial or ejecta environments are not. Therefore we have presented a comprehensive assemblage of features that are likely to be produced in each of the geomorphic environments. We hope that this atlas will trigger more research on diagnostic features, particularly their morphometry and detailed morphology, their persistence and rates of formation. In this first edition of the atlas we detail the features found on clasts in three geomorphic environments: aeolian, fluvial and weathering. Future editions of the atlas will include chapters on ejecta, micro-impacts, coastal, colluvial, glacial and structural features.
Bourke, Mary C.↗
Escarpment evolution on high-elevation rifted margins: Insights derived from a surface processes model that combines diffusion, advection and reaction
Experiments with a surface processes model of large-scale (1-1000 km) long-term (1-100 m.y.) erosional denudation are used to establish the controls on the evolution of a model escarpment that is related to the rifting of a continent. The mdoel describes changes in topographic form as a result of sumultaneous short- and long-range mass transport representing hillslope (diffusive) processes and fluvial transport (advection), repsectively. Fluvial entrainment is modeled as a first-order kinetic reaction which reflects the erodibility of the substrate, and therefore the fluvial system is not necessarily carrying at capacity. One dimensional and planform models demonstrate that the principal controls on the evolution of an initially steep model escarpment are (1) antecedent topography/drainage; (2) the timesale (or equivalently a length scale) in the fluvial entrainment reaction; (3) the flexural response of the lithosphere to denudation; and (4) the relative efficiencies of the short- and long-range transport processes. When rainfall and substrate lithology are uniform, a significant amount of discharge draining over the escarpment top causes it to degrade. Only when the top of the model escarpment coincides with a drainage divide can escarpment retreat occur for these conditions. An additional requirement for retreat of a model escarpment without decline is a long reaction time scale for fluvial entrainment. This corresponds to a substrate that is hard to detach by flucial erosion, and therefore to fluvial erosion that is not transport limited. Coninuous backtilting of an escarpment due ot flexural isostatic uplift in response to denudational unloading helps maintain the scarp top as a divide. It is essntial if the escarpment gradient is to be preserved during retreat in a uniform lithology. Low flexural rigidieties propote steep and slowly retreating escarpments. For given rainfall and substrate conditions, the morphology of a retraeating model escarpment is determined by the ratio of hte short-range diffusive and long range advective transport efficiencies. A low ration (which is interpreted to correspond to a more humid, temperate climate) produces a convex upper slope, and concave lower slope morphology and only major escarpments are predicted to preserve a high scarp gradient. Lithological contrasts in hte model produce more complex morphologies and predict the formation of scarps crowned by an erosionaly resistant caprock. However, resistant caprocks are not an essential requirement for model scarps to retreat. We conclude that the inferred controls and model behavior are both consistent with the present-day morphology of rifted continental margins and with modern conceptual models of landscape evolution.
Kooi, Henk↗
Weathering in the Forelands of Two Rapidly Retreating Alpine Glaciers of Volcanic Bedrock in the Three Sisters, Oregon, USA
The glaciers of the Three Sisters volcanoes in Cascadia have retreated dramatically over the past century. In order to understand ongoing chemical weathering and solute transport in the proglacial valleys, waters were sampled from glacier outwash streams, local snowmelt, and proglacial springs and lakes at Collier and Diller Glaciers. To understand weathering and transport processes in the proglacial plains, infrared orbital remote sensing data was used to map compositional variability and highlight weathering products, which were then ground-truthed with laboratory mineralogical and chemical analyses of sediments. The hydrochemistry is significantly affected by a sub- and proglacial mafic weathering system lacking carbonate minerals. Here we report major ion concentrations in meltwaters for the summer 2016 and 2017 melt seasons. Total cation concentrations range from 3 to 250 μeq/l and dissolved bicarbonate concentrations range from 2 to 200 μeq/l. Other dissolved anions are negligible compared to bicarbonate. Dissolved silica concentrations range from 2 to 260 μmol/l, comparable to total dissolved cation concentrations. The highest cation and silica concentrations were measured in moraine-sourced springs. Compositional remote sensing analysis identified alteration zones in the proglacial plains at both Collier and Diller indicating potential hydrated silica. This analysis is consistent with laboratory analysis of sediment samples, which indicate the presence of poorly crystalline phases weathering products, including hydrated silica. Weathered materials are preferentially deposited on moraines due to aeolian and glacial transport, as well as intra-moraine alteration, and at abandoned stream terraces due to fluvial transport. Geochemical measurements indicate that the predominant form of chemical weathering in these periglacial mafic systems is the carbonation of feldspar as well as reactive volcanic glass. The presence of poorly crystalline silicates, as indicated by remote sensing datasets and laboratory analysis, is consistent with rapid weathering of feldspars and glass and formation of Fe-Al-Si-bearing mineraloids in these proglacial valleys. This weathering regime has wide-ranging implications for atmospheric CO2 drawdown due to cold-climate volcanic rock weathering.
Rutledge, Alicia M.↗
Investigating Relationships Between Geochemistry and Physical Grain Characteristics Along a Glacio-Fluvial-Aeolian Sediment Transport Pathway Using µXRF
Iceland’s basaltic volcanic rocks and glacial, fluvial, and aeolian landscapes resemble those studied on Mars, which makes it an ideal location to study the evolution of basaltic landscapes, the weathering and alteration of basaltic sediments in cold and wet environments, and the generation of a basaltic sedimentary record. The SAND-E: Semi-Autonomous Navigation for Detrital Environments project examines physical and chemical changes in sediments transported through basaltic fluvial and aeolian environments, and tests operational scenarios, which include a drone and a robotic rover instrumented with autonomous terrain analysis software. As part of the SAND-E project, we examined a glacial outwash plain at Skjaldbreiðauhraun, in SW Iceland. This study uses micro X-ray fluorescence (μXRF) to examine the chemical and physical properties of unconsolidated sediment-size fractions from 710 μm to < 63 μm along a downstream transect from a glacial sourced watershed. μXRF is ideally suited for this task because it maps elemental distributions at sub-grain scales thereby allowing a direct correlation between grainsize, grain shape, and chemistry. It is also a good analog technique for the Mars 2020 mission equipped with the PIXL (Planetary Instrument for X-ray Lithochemistry) that will be deployed at Jezero Crater, Mars.
Champion, E.↗
Leaf Wax Hydrogen Isotopes Reflect Storm Track Position Over Western North America
Proxy records of past climates have yielded powerful insights into regional hydroclimate dynamics. Novel insights may be gained by reconstructing spatiotemporal changes in precipitation isotopologues in past climate states that cannot be gleaned from individual site‐level studies. In this paper, we ask whether latitudinal gradients in the stable hydrogen isotopic composition of precipitation, as inferred from sedimentary leaf wax biomarkers, reflect aspects of large‐scale climate conditions in western North America (WNA). Modern coretop samples from offshore WNA show that leaf wax hydrogen isotopes broadly track the hydrogen isotopic composition of rainfall between 20 and 40N, but with an offset corresponding to a relatively constant “apparent fractionation” value. Poleward of 40N, the leaf wax signal may be complicated by fluvial transport of leaf waxes from the continental interior. Leaf wax‐inferred precipitation hydrogen isotopes show a shift to more negative values between 30 and 40N. We use modern observational data to show that this latitudinal range marks a major transition between the subtropical arid zone and the location of the midlatitude storm tracks over the northeast Pacific. Nudged water isotope‐enabled models capture the location of the arid to mesic climate transition with fidelity. This modern data set suggests that reconstructions of the latitudinal gradient of precipitation hydrogen isotopes can constrain the sensitivity of the storm tracks to shifts in climatic boundary conditions in past climate states. This approach can yield novel insights into past, present, and future hydroclimate variability in this arid region.
54 ENVIRONMENTAL SCIENCES↗
Linking Home Plate and Algonquin Class Rocks through Microtextural Analysis: Evidence for Hydrovolcanism in the Inner Basin of Columbia Hills, Gusev Crater
Examining the his-tory of a rock as the summed history of its constituent grains is a proven and powerful strategy that has been used on Earth to maximize the information that can be gleaned from limited samples. Grain size, sorting, roundness, and texture can be observed at the handlens scale, and may reveal clues to transport regime (e.g. fluvial, glacial, eolian) and transport distance. Diagenetic minerals may be of a form and textural context to allow identification, and to point to dominant diagenetic processes (e.g. evaporitic concentration, intermittent dissolution, early vs. late diagenetic emplacement). Handlens scale features of volcaniclastic particles may be diagnostic of primary vs recycled (by surface processes) grains and may provide information about eruptive patterns and processes. When the study site is truly remote, such as Mars, and when there are severe limitations on sample return or sample analysis with other methods, examination at the hand lens scale becomes critical both for extracting a maximum of information, and for best utilizing finite analytical capabilities.
Mittlefehldt, David W.↗
Overview and Initial Results of SAND-E: Semi-Autonomous Navigation for Detrital Environments
Unmanned aerial systems (UAS) and automated terrain analysis for science and navigation are new technologies for planetary exploration. The Mars Helicopter will fly with the Mars2020 rover, the Dragonfly quadcopter will explore Titan, and Soil Properties and Object Classification (SPOC) software will be used for path planning and navigation on the Mars2020 rover. Using an Argo J5 rover instrumented with stereo cameras and Autonomous Soil Assessment System (ASAS) software, and an off the shelf quadcopter, SAND-E tested the use of automated terrain analysis and UAS data for science operations in a Mars-analog environment in Iceland during July of 2019. Scientifically, we sought to determine changes in the physical and chemical properties of sediments along a glacial-fluvial-aeolian transport pathway. Operationally, we tested rover mission-like scenarios that included UAS images and classified terrain images. Here, we present the initial results for both the operations and science elements of the study. Site Selection: A goal of SAND-E is examine sorting and alteration of sediments in fluvial and aeolian environments in both mineral-dominated and glass-dominated basaltic settings. During the first year of the project we focused on a mineral-dominated environment. Selection of the location was based on prior publications that indicated our selected region had a greater abundance of crystalline sediments than other areas fluvial-aeolian settings in Iceland. Other criteria included the presence of both fluvial and aeolian landforms along a transport pathway such that the sediments in transport could be linked to their source rocks. We chose the Skjaldbreidauhraun glacial outwash plain, which sits at the base of Thórisjökull glacier. The site is 30 km north of Thingvellir National Park and ~2 hours from Reykjavik. The outwash plain is fed by two small catchments that drain from the base of the glacier and cut through hyaloclastite and shield volcano bedrock. The drainage progresses from steep alluvial fans near the glacier into a low-sloping fluvial braidplain that becomes confined by the Skjaldbreidur shield volcano and creates a shallow canyon cut into lava bedrock. The fluvial system was a typical braided alluvial environment composed pebble- and cobble-bedded longitudinal bars and sandy channel beds. The river remained active and fluctuated in response to diurnal runoff cycles near the glacier before disappearing into the sandy substrate downstream. The high concentration of suspended sediment in the river was evident by the cloudy water and the silt and clay-sized sediments that draped the channel beds after abandonment and created playas in the lowest sloping areas of the catchment. The entire fluvial system was affected by the winds generated by frontal systems and katabatic flows descending the glacier. This resulted in the formation of aeolian lag deposits and a wind-deflation plain where the fluvial system was not active. Wind ripples and drifts formed in abandoned fluvial channels from aeolian reworking of the sand-sized fluvial sediments. The silt- and clay-sized sediments found in fluvial channels, bar tops, and playas generated dust plumes during high wind events. Our operation sought to capture the variability in this system by sampling from the range of fluvial and aeolian features 6.3 km (proximal), 11.3 km (medial), and 14.4 km (distal) along the river from its origin at the base of glacier.
Ewing, R. C.↗
Geomorphology of Ma'adim Vallis, Mars,and Associated Paleolake Basins
Ma'adim Vallis, one of the largest valleys in the Martian highlands, appears to have originated by catastrophic overflow of a large paleola ke located south of the valley heads. Ma'adim Vallis debouched to Gus ev crater, 900 km to the north, the landing site for the Spirit Mars Exploration Rover. Support for the paleolake overflow hypothesis come s from the following characteristics: (I) With a channel width of 3 km at its head, Ma'adim Vallis originates at two (eastern and western) gaps incised into the divide of the approximately 1.1 M km(exp 2) enc losed Eridania head basin, which suggests a lake as the water source. (2) The sinuous course of Ma'adim Vallis is consistent with overland flow controlled by preexisting surface topography, and structural con trol is not evident or required to explain the valley course. (3) The nearly constant approximately 5 km width of the inner channel through crater rim breaches, the anastomosing course of the wide western tri butary, the migration of the inner channel to the outer margins of be nds in the valley's lower reach, a medial sedimentary bar approximate ly 200 m in height, and a step-pool" sequence are consistent with modeled flows of 1-5 x l0 (exp 6) m(exp 3)/s. Peak discharges were likely higher but are poorly constrained by the relict channel geometry. (4 ) Small direct tributary valleys to Ma'adim Vallis have convex-up lon gitudinal profiles, suggesting a hanging relationship to a valley that was incised quickly relative to the timescales of tributary developm ent. (5) The Eridania basin had adequate volume between the initial d ivide and the incised gap elevations to carve Ma'adim Vallis during a single flood. (6) The Eridania basin is composed of many overlapping , highly degraded and deeply buried impact craters. The floor materials of the six largest craters have an unusually high internal relief ( approximately 1 km) and slope (approximately 0.5-1.5 degrees) among d egraded Martian craters, which are usually flat-floored. Long-term, fluvial sediment transport appears to have been inhibited within these craters, and the topography is inconsistent with basaltic infilling. (7) Fluvial valleys do not dissect the slopes of these deeper crater floor depressions, unlike similar slopes that are dissected at higher levels in the watershed. These characteristics (6, 7) suggest that wa ter mantled at least the lower parts of the Eridania basin floor thro ughout the period of relatively intense erosion early in Martian hist ory. The lake level increased and an overflow occurred near the close of the Noachian (age determined using >5 km crater counts). Initially , the Eridania basin debouched northward at two locations into the in termediate basin, a highly degraded impact crater approximately 500 k m in diameter. As this intermediate basin was temporarily filled with water, erosion took place first along the lower (northern) reach of Ma'adim Vallis, debouching to Gusev crater. The western overflow point was later abandoned, and erosion of the intermediate basin interior was concentrated along the eastern pathway. Subsequent air fall depos ition, impact gardening, tectonism, and limited fluvial erosion modified the Eridania basin region, so evidence for a paleolake is restrict ed to larger landforms that could survive post-Noachian degradation p rocesses.
Irwin, Rossman, P., III↗
Erosional dynamics, flexural isostasy, and long-lived escarpments: A numerical modeling study
Erosional escarpments common features of high-elevation rifted continets. Fission track data suffest that these escarpments form by base level lowering and/or marginal uplift during rifting, followed by lateral retreat of an erosion front across tens to hundreds of kioometers. Previous modeling studies have shown that this characteristic pattern of denudation can have a profound impact upon marginal isostatic uplift and the evolution of offshore sedimentary basins. Yet at present there is only a rudimentary understanding of the geomorphic mechanisms capable of driving such prolonged escarpment retreat. In this study we present a nonlinear, two-dimensional landscape evolution model tha tis used to asses the necessary and sufficient conditions for long-term retreat of a rift-generated escarpment. The model represents topography as a grid of cells, with drainage networkds evolving as water flows across the grid in the direction of steepest descent. The model accounts for sediment production by weathering, fluvial sediment transport, bedrock channel erosion, and hillslope sediment transport by diffusive mechanisms and by mass failure. Numerical experiments presented explore the effects of different combinations of erosion processes and of dynamic coupling between denudation and flexural isostatic uplift. Model results suggest that the necessary and sufficient conditions for long-term escarpment retreat are (1) incising bedrock channels in which the erosion rate increases with increasing drainage area, so that the channels steepen and propagate headward; (2) a low rate of sediment production relative to sediment transport efficiency, which promotes relief-generating processes over diffusive ones; (3) high continental elevation, which allows greater freedom for fluvial dissection; and (4) any process, including flexural isostatic uplift, that helps to maintain a drainage divide near an escarpment crest. Flexural isostatic uplift also facilitates escarpment, thereby increasing channel gradients and accelerating erosion which in turn generates additional isostatic uplift. Of all the above conditions, high continental elevation is common ot most rift margin escarpments and may ultimately be the most important factor.
Tucker, Gregory E.↗
Overview of SAND-E: Semi-Autonomous Navigation for Detrital Environments
Rovers are the state of the art for the exploration and detection of past habitability and life on other worlds. One of the most basic functions of a rover is terrain navigation. Information collected by the rover is used autonomously to mitigate terrain hazards such large rocks, while humans qualitatively assess hazardous geologic terrain such as soil type and degree of rock cover. Planetary scientists use the same information to select targets such as drill sites, and for basic scientific analysis such as characterization of rock outcrops. Although the data is complementary, data from terrain analysis for navigation and terrain analysis for scientific investigations are poorly integrated. The lack of integration creates science and operation inefficiencies that limit exploration of habitable environments. As new modes of exploration come online, such as unmanned aerial systems (UAS) (e.g., the Mars Helicopter Scout and Titan Dragonfly), a need exists to integrate terrain data and science analysis to improve operational and scientific outcomes during exploration. We present an overview of a project aimed at evaluating the effectiveness and capability rover and UAS-based semi-automated terrain analysis using the Automated Soil Assessment Systems (ASAS) developed by Mission Control Space Services for navigating, selecting targets for sampling, and characterizing mafic detrital sediments along glacio-fluvial-aeolian sand transport pathways in Iceland. We describe recent advances in automated terrain analysis in sandy environments and scientific uses of terrain assessment from sandy environments. We assess fluvial and aeolian terrains in Iceland and show how terrain analysis data can inform scientific characterization of these environments.
Ewing, Ryan C.↗
Constraining the Timespan of Fluvial Activity From the Intermittency of Sediment Transport on Earth and Mars
Explore the source record for details and available documents.
A. T. Hayden↗
Geomorphic evidence for an eolian contribution to the formation of the Martian northern plains
The northern plains of Mars have many morphologic characteristics that are uncommon or absent on the rest of the planet. Mariner 9 and Viking images obtained north of latitude 30 deg N revealed 'smooth' and 'mottled' plains of an uncertain origin. Some or all of the northern plains were interpreted to consist of lava plains intermixed with eolian and volcanic materials thick eolian mantles that buried portions of the mid latitudes periglacial deposits resulting from the presence of ground ice and as water-transported sediments derived from fluvial runoff, lacustrine deposition in standing bodies of water, or glacial runoff. The highest-resolution Viking images show many intriguing details that may provide clues to the origin of this complex and distinctive terrain. Some of the informative features present in the best Viking images, comparing the observations to what may be expected from various hypotheses of formation, are reviewed. While the results are not conclusive for any single hypothesis, eolian processes have played a major role in the erosion (and possibly deposition) of the materials that make up the surface exposures in the Martian northern plains.
Zimbelman, J. R.↗
Storm Induced Injection of the Mississippi River Plume Into the Open Gulf of Mexico
The direct impact of the Mississippi River on the open Gulf of Mexico is typically considered to be limited due to the predominantly along-shore current pattern. Using satellite imagery, we analyzed chl a distributions in the northern Gulf of Mexico before and after the passage of two storms: Hurricane Lili and Tropical Storm Barry. Our analyses indicate that storm-induced eddies can rapidly inject large volumes of nutrient-rich Mississippi River water to the open gulf, and lead to phytoplankton blooms. Although these events last only a few weeks, they transport significant amounts of fluvial substances to the ocean. These river-ocean interactions are especially significant in tropical and subtropical regions because receiving waters are typically permanently stratified and oligotrophic.
Yuan, Jinchun↗
Erosion, Transportation, and Deposition on Outer Solar System Satellites: Landform Evolution Modeling Studies
Mass movement and landform degradation reduces topographic relief by moving surface materials to a lower gravitational potential. In addition to the obvious role of gravity, abrasive mechanical erosion plays a role, often in combination with the lowering of cohesion, which allows disaggregation of the relief-forming material. The identification of specific landform types associated with mass movement and landform degradation provides information about local sediment particle size and abundance and transportation processes. Generally, mass movements can be classified in terms of the particle sizes of the transported material and the speed the material moved during transport. Most degradation on outer planet satellites appears consistent with sliding or slumping, impact erosion, and regolith evolution. Some satellites, such as Callisto and perhaps Hyperion and Iapetus, have an appearance that implies that some additional process is at work, most likely sublimation-driven landform modification and mass wasting. A variant on this process is thermally driven frost segregation as seen on all three icy Galilean satellites and perhaps elsewhere. Titan is unique among outer planet satellites in that Aeolian and fluvial processes also operate to erode, transport, and deposit material. We will evaluate the sequence and extent of various landform-modifying erosional and volatile redistribution processes that have shaped these icy satellites using a 3-D model that simulates the following surface and subsurface processes: 1) sublimation and re-condensation of volatiles; 2) development of refractory lag deposits; 3) disaggregation and downward sloughing of surficial material; 4) radiative heating/cooling of the surface (including reflection, emission, and shadowing by other surface elements); 5) thermal diffusion; and 6) vapor diffusion. The model will provide explicit simulations of landform development and thusly predicts the topographic and volatile evolution of the surface and final landscape form as constrained by DEMs. We have also simulated fluvial and lacustrine modification of icy satellites landscapes to evaluate the degree to which fluvial erosion of representative initial landscapes can replicate the present Titan landscape.
erosion↗
The Role of (Delta)C-13 in the Search for Reduced Organics on the Surface of Mars
The capabilities of the Sample Analysis at Mars (SAM) instrument suite on the Mars Science Laboratory (MSL) to detect trace amounts of organic carbon compounds are unprecedented, and MSL may be the first mission to reveal the presence of organic carbon on Mars. The search for reduced organic carbon on Mars is inextricably tied to: a) the preservation potential of the environment from which we take a solid sample, and b) the evolved gas analysis (EGA) techniques used by SAM to release volatiles from this solid sample. Several prospective targets have been identified for sample analysis at Gale Crater. Stratigraphic sequences of phyllosilicates and sulfates at Gale are thought to represent a period of global climate transition from a moderate pH lacustrine environment to an evaporitic environment, both of which could sequester organic carbon (Thomson et al. 2011). The sediment mound in Gale Crater contains a range of lithologies suggesting changes in redox conditions, and evidence of both lacustrine and fluvial depositional processes, which may have transported organic carbon from the layer in which it formed and resulted in its preservation elsewhere within the crater (Anderson and Bell, 2010). Inverted channel fills suggest erosion resistant material that could serve to preserve organics originally deposited in a low energy aqueous environment. The lithology sampled will affect not only the preservation of organics, but also our ability to detect organics during our evolved gas analysis, based on the sample matrix. For example, reduced organics may be trapped in the mineral structure, and thermal evolution of these organics will occur during thermal decomposition of the host mineral. If organics are occluded in minerals that have very high thermal decomposition temperatures, they may be, in effect, "too well preserved," and difficult to detect during EGA. Alternatively, the possible presence of perchlorate, or other strong oxidants in surface regolith, may result in destruction of structural information identifying organic molecules before reaching the QMS on SAM via oxidation to C02 during heating. If this is the case, the stable carbon isotopic composition (delta 13C) of the C02 evolved and measured by the Tunable Laser Spectrometer (TLS) on SAM may help identify the presence of organics. On Earth, biological activity can cause large fractionations of 13C/12C, which can preserved in sedimentary deposits and distinguish the organic products of biotic processes from inorganic atmospheric and geological reservoirs. It is plausible that similar fractionations could occur on Mars and be preserved in reduced organic matter in sediments. Bulk delta 13C measurements alone may not reveal a signature of trace organic carbon that may be present along with inorganic carbon. If both organic and inorganic carbon compounds are present, it may be possible to detect the organic carbon by comparing the 013C of pyrolysis and combustion experiments. The TLS on SAM is capable of obtaining high precision measurements of delta13C from C02 evolved during pyrolysis and combustion of solid regolith samples. Because carbonates are expected to be present at abundances of 0.1-1 % in Martian soil, and organics in the ppb range (Webster and Mahaffy, 2011), analog samples must represent this mix of reduced organic carbon and carbonate. The work presented here will examine the use of delta13C of C02 produced during combustion of bulk Mars analog samples as a proxy for detection of reduced organic carbon.
Stern, J. C.↗