Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extended structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

RESOLVING THE STELLAR OUTSKIRTS OF M81: EVIDENCE FOR A FAINT, EXTENDED STRUCTURAL COMPONENT

We present a wide field census of resolved stellar populations in the northern half of M81, conducted with Suprime-Cam on the 8 m Subaru telescope and covering an area {approx}0.3 deg{sup 2}. The resulting color-magnitude diagram reaches over one magnitude below the red giant branch (RGB) tip, allowing a detailed comparison between the young and old stellar spatial distributions. The surface density of stars with ages {approx}<100 Myr is correlated with that of neutral hydrogen in a manner similar to the disk-averaged Kennicutt-Schmidt relation. We trace this correlation down to gas densities of {approx}2 x 10{sup 20} cm{sup -2}, lower than typically probed with H{alpha} flux. Both diffuse light and resolved RGB star counts show compelling evidence for a faint, extended structural component beyond the bright optical disk, with a much flatter surface brightness profile. The star counts allow us to probe this component to significantly fainter levels than is possible with the diffuse light alone. From the colors of its RGB stars, we estimate that this component has a peak global metallicity [M/H] {approx} -1.1 {+-} 0.3 at deprojected radii 32-44 kpc assuming an age of 10 Gyr and distance of 3.6 Mpc. The spatial distribution of its RGB stars follows a power-law surface density profile, I(r) {proportional_to} r {sup -{gamma}}, with {gamma} {approx} 2. If this component were separate from the bulge and from the bright optical disk, then it would contain {approx}10%-15% of M81's total V-band luminosity. We discuss the possibility that this is M81's halo or thick disk, and in particular highlight its similarities and differences with these components in the Milky Way. Other possibilities for its nature, such as a perturbed disk or the faint extension of the bulge, cannot be completely ruled out, though our data disfavor the latter. These observations add to the growing body of evidence for faint, complex extended structures beyond the bright disks of spiral galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

The detection of diffuse extended structure in 3C 273: implications for jet power

We present deep Very Large Array imaging of 3C 273 in order to determine the diffuse, large scale radio structure of this famous radio-loud quasar. Diffuse extended structure (radio lobes) is detected for the first time in these observations as a consequence of high dynamic range in the 327.5 and 1365 MHz images. This emission is used to estimate a time averaged jet power, 7.2 × 10{sup 43} erg s{sup −1} < Q-bar < 3.7 × 10{sup 44} erg s{sup −1}. Brightness temperature arguments indicate consistent values of the time variability Doppler factor and the compactness Doppler factor for the inner jet, δ ≳ 10. Thus, the large apparent broadband bolometric luminosity of the jet, ∼3 × 10{sup 46} erg s{sup −1}, corresponds to a modest intrinsic luminosity ≳10{sup 42} erg s{sup −1}, or ∼1% of Q-bar . In summary, we find that 3C 273 is actually a “typical” radio-loud quasar contrary to suggestions in the literature. The modest Q-bar is near the peak of the luminosity distribution for radio-loud quasars and it is consistent with the current rate of dissipation emitted from millimeter wavelengths to gamma rays. The extreme core-jet morphology is an illusion from a near pole-on line of sight to a highly relativistic jet that produces a Doppler enhanced glow that previously swamped the lobe emission. 3C 273 apparently has the intrinsic kpc scale morphology of a classical double radio source, but it is distorted by an extreme Doppler aberration.

79 ASTRONOMY AND ASTROPHYSICS↗

A DEEPER LOOK AT LEO IV: STAR FORMATION HISTORY AND EXTENDED STRUCTURE

We present MMT/Megacam imaging of the Leo IV dwarf galaxy in order to investigate its structure and star formation history, and to search for signs of association with the recently discovered Leo V satellite. Based on parameterized fits, we find that Leo IV is round, with {epsilon} < 0.23 (at the 68% confidence limit) and a half-light radius of r{sub h} {approx_equal} 130 pc. Additionally, we perform a thorough search for extended structures in the plane of the sky and along the line of sight. We derive our surface brightness detection limit by implanting fake structures into our catalog with stellar populations identical to that of Leo IV. We show that we are sensitive to stream-like structures with surface brightness {mu}{sub r} {approx}< 29.6 mag arcsec{sup -2}, and at this limit we find no stellar bridge between Leo IV (out to a radius of {approx}0.5 kpc) and the recently discovered, nearby satellite Leo V. Using the color-magnitude fitting package StarFISH, we determine that Leo IV is consistent with a single age ({approx}14 Gyr), single metallicity ([Fe/H] {approx} -2.3) stellar population, although we cannot rule out a significant spread in these values. We derive a luminosity of M{sub V} = -5.5 {+-} 0.3. Studying both the spatial distribution and frequency of Leo IV's 'blue plume' stars reveals evidence for a young ({approx}2 Gyr) stellar population which makes up {approx}2% of its stellar mass. This sprinkling of star formation, only detectable in this deep study, highlights the need for further imaging of the new Milky Way satellites along with theoretical work on the expected, detailed properties of these possible 'reionization fossils'.

79 ASTRONOMY AND ASTROPHYSICS↗

pi-Extended Porphyrins: The Impact of Aromatic Heterocycles on the Properties of the Largely pi-Extended Structures (Final Report_UNT_SC0016766)

Largely π-extended carbon-rich materials represent fascinating yet challenging frontiers in chemistry and materials science as it offers numerous opportunities in molecular electronics. pi-Extended porphyrins possess unique set of electronic and photophysical properties and are very attractive for a wide range of applications. However, the synthesis and functionalization of pi-extended porphyrins had been very challenging. To explore and expand this intriguing research field, it is essential to develop synthetic tools to make them accessible. Funded by the Department of Energy Basic Energy Science, my laboratory addressed these synthetic challenges by developing concise and versatile methods for pi-extended porphyrins. Significant progress has been made in multiple directions, including fusing Polycyclic Aromatic Hydrocarbons (PAH), aromatic heterocycles, antiaromatic component, and cross-conjugated component to porphyrins as well as push-pull porphyrins. The availability of these methods has made it possible to rationally design and synthesize functionalized pi-extended porphyrins. Unprecedented electronic and photophysical properties have been discovered for these pi-extended porphyrins.

36 MATERIALS SCIENCE↗

Extended Structures in RNA Folding Intermediates Are Due to Nonnative Interactions Rather than Electrostatic Repulsion

RNA folding occurs via a series of transitions between metastable intermediate states for Mg{sup 2+} concentrations below those needed to fold the native structure. In general, these folding intermediates are considerably less compact than their respective native states. Our previous work demonstrates that the major equilibrium intermediate of the 154-residue specificity domain (S-domain) of the Bacillus subtilis RNase P RNA is more extended than its native structure. We now investigate two models with falsifiable predictions regarding the origins of the extended intermediate structures in the S-domains of the B. subtilis and the Escherichia coli RNase P RNA that belong to different classes of P RNA and have distinct native structures. The first model explores the contribution of electrostatic repulsion, while the second model probes specific interactions in the core of the folding intermediate. Using small-angle X-ray scattering and Langevin dynamics simulations, we show that electrostatics plays only a minor role, whereas specific interactions largely account for the extended nature of the intermediate. Structural contacts in the core, including a nonnative base pair, help to stabilize the intermediate conformation. We conclude that RNA folding intermediates adopt extended conformations due to short-range, nonnative interactions rather than generic electrostatic repulsion of helical domains. These principles apply to other ribozymes and riboswitches that undergo functionally relevant conformational changes.

59 BASIC BIOLOGICAL SCIENCES↗

The ever-evolving active site: transformation of single atoms to extended structures during the Rh-catalyzed reverse water–gas shift reaction

At low temperatures (< 400°C), single atoms of Rh supported on rutile TiO 2 (rTiO 2 ) are responsible for the formation of CO during the reverse water gas shift (RWGS), while methane production is associated with the Rh-TiO 2 interface due to the correlation between methane formation rates and the volume-averaged Rh nanoparticle diameter. As the temperature is increased to >540°C, there is a notable increase in CO selectivity and methane production rates tend towards zero. The time to reach zero depends on the temperature but independent of the initial Rh structure (single atoms and/or nanoparticles), which is controlled by the catalyst preparation method (wetness impregnation versus colloidal nanoparticles). At 600°C and > 4 h time on stream, the catalytic behaviour becomes completely agnostic to the initial Rh structure as well as weight loading, and the catalysts are highly selective for the reverse water gas-shift reaction. Post-reaction HR-TEM image analysis confirms Rh nanoparticles crystallize/order during the reaction; at 400°C, most of the Rh particles are disordered, while at 600°C, they are more ordered (i.e., development of defined faceting). Infrared spectroscopy of CO adsorption on Rh nanoparticles confirms the appearance of defined facets after annealing in nitrogen at high temperatures. Annealing the Rh/rTiO 2 catalysts prior to the RWGS reaction demonstrates the structural transformation of Rh depends only on time and temperature and not on reactant or product fugacity. Sites responsible for stabilizing Rh single atoms are no longer competent at higher temperatures, enabling their integration into existent nanoparticles. As the reaction temperature is increased to temperatures >540°C, the dominant active site for CO production evolves from single atoms to extended Rh structures.

36 MATERIALS SCIENCE↗

Tree-level bispectrum in the effective field theory of large-scale structure extended to massive neutrinos

We compute the tree-level bispectrum of dark matter in the presence of massive neutrinos in the mildly non-linear regime in the context of the effective field theory of large-scale structure (EFTofLSS) . For neutrinos, whose typical free streaming wavenumber (k fs ) is longer than the non-linear scale (k NL ), we solve a Boltzmann equation coupled to the effective fluid equation for dark matter. We solve perturbatively the coupled system by expanding in powers of the neutrino density fraction (fν) and the ratio of the wavenumber of interest over the non-linear scale (k/k NL ) and add suitable counterterms to remove the dependence from short distance physics. For equilateral configurations, we find that the total-matter tree-level bispectrum is approximately 16fν times the dark matter one on short scales (k > k fs ). The largest contribution stems from the back-reaction of massive neutrinos on the dark matter growth factor. As a result, on large scales (k < k fs ) the contribution of neutrinos to the bispectrum is smaller by up to two orders of magnitude.

79 ASTRONOMY AND ASTROPHYSICS↗

THE STAR FORMATION HISTORY AND EXTENDED STRUCTURE OF THE HERCULES MILKY WAY SATELLITE

We present imaging of the recently discovered Hercules Milky Way satellite and its surrounding regions to study its structure, star formation history and to thoroughly search for signs of disruption. We robustly determine the distance, luminosity, size, and morphology of Hercules utilizing a bootstrap approach to characterize our uncertainties. We derive a distance to Hercules via a comparison to empirical and theoretical isochrones, finding a best match with the isochrone of M92, which yields a distance of 133 +- 6 kpc. As previous studies have found, Hercules is very elongated, with epsilon = 0.67 +- 0.03 and a half-light radius of r{sub h} approx = 230 pc. Using the color-magnitude-fitting package StarFISH, we determine that Hercules is old (>12 Gyr) and metal-poor ([Fe/H] approx -2.0), with a spread in metallicity, in agreement with previous spectroscopic work. This result is robust with respect to slight variations in the distance to Hercules and mismatches between the observed Hercules color-magnitude diagram and theoretical isochrones. We infer a total absolute magnitude of M{sub V} = -6.2 +- 0.4. Our innovative search for external Hercules structure both in the plane of the sky and along the line of sight yields some evidence that Hercules is embedded in a larger stream of stars. A clear stellar extension is seen to the northwest with several additional candidate stellar overdensities along the position angle of Hercules out to approx35' (approx1.3 kpc). While the association of any of the individual stellar overdensities with Hercules is difficult to determine, we do show that the summed color-magnitude diagram of all three is consistent with Hercules' stellar population. Finally, we estimate that any change in the distance to Hercules across its face is at most approx6 kpc, and the data are consistent with Hercules being at the same distance throughout.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE EXTENDED STRUCTURE OF THE PHOENIX DWARF GALAXY

We present the star formation history (SFH) and its variations with galactocentric distance for the Local Group dwarf galaxy of Phoenix. They have been derived from a (F555W, F814W) color-magnitude diagram obtained from WFPC2-HST data, which reaches the oldest main-sequence turnoffs. The IAC-star and IAC-pop codes and the MinnIAC suite have been used to obtain the star formation rate as a function of time and metallicity, psi(t, z). We find that Phoenix has had ongoing but gradually decreasing star formation over nearly a Hubble time. The highest level of star formation occurred from the formation of the galaxy till 10.5 Gyr ago, when 50% of the total star formation had already taken place. From that moment, star formation continues at a significant level until 6 Gyr ago (an additional 35% of the stars are formed in this time interval), and at a very low level till the present time. The chemical enrichment law shows a trend of slowly increasing metallicity as a function of time until 6-8 Gyr ago, when metallicity starts to increase steeply to the current value. We have paid particular attention to the study of the variations of the SFH as a function of radius. Young stars are found in the inner region of the galaxy only, but intermediate-age and old stars can be found at all galactocentric distances. The distribution of mass density in alive stars and its evolution with time has been studied. This study shows that star formation started at all galactocentric distances in Phoenix at an early epoch. If stars form in situ in Phoenix, the star formation onset took place all over the galaxy (up to a distance of about 400 pc from the center), but preferentially out of center regions. After that, our results are compatible with a scenario in which the star formation region envelope slowly shrinks as time goes on, possibly as a natural result of pressure support reduction as gas supply diminishes. As a consequence, the star formation stopped first (about 7-8 Gyr ago) in outer regions and the scale length of the stellar mass density distribution decreased with time. Finally, no traces of a true, old halo are apparent in Phoenix either in its stellar age distribution or in the stellar mass density distribution, at least out to 0.5 kpc (about 2.5 scale length) from the center.

79 ASTRONOMY AND ASTROPHYSICS↗

Extended structure and fate of the nucleus in Henize 2-10

We investigate the structure and nuclear region of the black hole (BH) hosting galaxy Henize 2-10. Surface brightness profiles are analyzed using Magellan/Megacam g- and r-band images. Excluding the central starburst, we find a best-fit two-component Sérsic profile with n {sub in} ∼ 0.6, r {sub eff,} {sub in} ∼ 260 pc and n {sub out} ∼ 1.8, r ∼ 1 kpc. Integrating out to our outermost data point (100'' ∼ 4.3 kpc), we calculate M{sub g} = –19.2 and M{sub r} = –19.8. The corresponding enclosed stellar mass is M {sub *} ∼ (10 ± 3) × 10{sup 9} M {sub ☉}, ∼3 × larger than previous estimates. Apart from the central ≲500 pc, with blue colors and an irregular morphology, the galaxy appears to be an early-type system. The outer color is quite red, (g – r){sub 0} = 0.75, suggesting a dominant old population. We study the nuclear region of the galaxy using archival Gemini/NIFS K-band adaptive optics spectroscopy and Hubble Space Telescope imaging. We place an upper limit on the BH mass of ∼10{sup 7} M {sub ☉} from the NIFS data, consistent with that from the M {sub BH}-radio-X-ray fundamental plane. No coronal lines are seen, but a Brγ source is located at the position of the BH with a luminosity consistent with the X-ray emission. The starburst at the center of Henize 2-10 has led to the formation of several super star clusters, which are within ∼100 pc of the BH. We examine the fate of the nucleus by estimating the dynamical masses and dynamical friction timescales of the clusters. The most massive clusters (∼10{sup 6} M {sub ☉}) have τ{sub dyn} ≲ 200 Myr, and thus Henize 2-10 may represent a rare snapshot of nuclear star cluster formation around a preexisting massive BH.

79 ASTRONOMY AND ASTROPHYSICS↗

THE ARCHES CLUSTER: EXTENDED STRUCTURE AND TIDAL RADIUS

At a projected distance of ∼26 pc from Sgr A*, the Arches cluster provides insight into star formation in the extreme Galactic center (GC) environment. Despite its importance, many key properties, such as the cluster’s internal structure and orbital history, are not well known. We present an astrometric and photometric study of the outer region of the Arches cluster ( R > 6.″25) using Hubble Space Telescope WFC3IR. Using proper motions, we calculate membership probabilities for stars down to F153M = 20 mag (∼2.5 M {sub ⊙}) over a 120″ × 120″ field of view, an area 144 times larger than previous astrometric studies of the cluster. We construct the radial profile of the Arches to a radius of 75″ (∼3 pc at 8 kpc), which can be well described by a single power law. From this profile we place a 3 σ lower limit of 2.8 pc on the observed tidal radius, which is larger than the predicted tidal radius (1–2.5 pc). Evidence of mass segregation is observed throughout the cluster, and no tidal tail structures are apparent along the orbital path. The absence of breaks in the profile suggests that the Arches has not likely experienced its closest approach to the GC between ∼0.2 and 1 Myr ago. If accurate, this constraint indicates that the cluster is on a prograde orbit and is located in front of the sky plane that intersects Sgr A*. However, further simulations of clusters in the GC potential are required to interpret the observed profile with more confidence.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of different thickness crystalline SiC buffer layers on the ordering of MgB{sub 2} films probed by extended x-ray absorption fine structure

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a powerful method to investigate the local structure of thin films. Here, we have studied EXAFS of MgB{sub 2} films grown on SiC buffer layers. Crystalline SiC buffer layers with different thickness of 70, 100, and 130 nm were deposited on the Al{sub 2}O{sub 3} (0001) substrates by using a pulsed laser deposition method, and then MgB{sub 2} films were grown on the SiC buffer layer by using a hybrid physical-chemical vapor deposition technique. Transition temperature of MgB{sub 2} film decreased with increasing thickness of SiC buffer layer. However, the T{sub c} dropping went no farther than 100 nm-thick-SiC. This uncommon behavior of transition temperature is likely to be created from electron-phonon interaction in MgB{sub 2} films, which is believed to be related to the ordering of MgB{sub 2} atomic bonds, especially in the ordering of Mg–Mg bonds. Analysis from Mg K-edge EXAFS measurements showed interesting ordering behavior of MgB{sub 2} films. It is noticeable that the ordering of Mg–B bonds is found to decrease monotonically with the increase in SiC thickness of the MgB{sub 2} films, while the opposite happens with the ordering in Mg–Mg bonds. Based on these results, crystalline SiC buffer layers in MgB{sub 2} films seemingly have evident effects on the alteration of the local structure of the MgB{sub 2} film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-Ray Absorption Near Edge Structure And Extended X-Ray Absorption Fine Structure Analysis of Standards And Biological Samples Containing Mixed Oxidation States of Chromium(III) And Chromium(VI)

For the first time a method has been developed for the extended X-ray absorption fine structure (EXAFS) data analyses of biological samples containing multiple oxidation states of chromium. In this study, the first shell coordination and interatomic distances based on the data analysis of known standards of potassium chromate (Cr(VI)) and chromium nitrate hexahydrate (Cr(III)) were investigated. The standards examined were mixtures of the following molar ratios of Cr(VI):Cr(III), 0:1, 0.25:0.75, 0.5:0.5, 0.75:0.25, and 1:0. It was determined from the calibration data that the fitting error associated with linear combination X-ray absorption near edge structure (LC-XANES) fittings was approximately {+-}10% of the total fitting. The peak height of the Cr(VI) pre-edge feature after normalization of the X-ray absorption (XAS) spectra was used to prepare a calibration curve. The EXAFS fittings of the standards were also investigated and fittings to lechuguilla biomass samples laden with different ratios of Cr(III) and Cr(VI) were performed as well. An excellent agreement between the XANES data and the data presented in the EXAFS spectra was observed. The EXFAS data also presented mean coordination numbers directly related to the ratios of the different chromium oxidation states in the sample. The chromium oxygen interactions had two different bond lengths at approximately 1.68 and 1.98 {angstrom} for the Cr(VI) and Cr(III) in the sample, respectively.

09 BIOMASS FUELS↗

Extended Electronic Structure Inhomogeneity Created by Double Chain Layer Defects Surrounding Columnar Tracks in Heavy-Ion Irradiated YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}.

In YBa2Cu3O7-delta (YBCO), heavy-ion irradiation creates continuous amorphous tracks that are highly effective for vortex pinning. However, the electronic structure landscape of defects and consequently their vortex pinning roles are unclear. Here, we show double chain layer (DCL) defects which intersect the columnar tracks are additionally produced by high energy Pb ion irradiation in YBCO. The DCL defects are similar to 29 nm long, about three times the columnar defect diameter. The electronic structures of the DCL and columnar track defects were determined using atomic-resolution scanning transmission electron microscopy (STEM) and high resolution electron energy loss spectroscopy (EELS). Results show a decrease in the oxygen and copper content at the interface between the track and the YBCO matrix, resulting in interfacial strain. For the DCL defects, the STEM/EELS study revealed a localized electron doped CuO2 plane next to the DCL defect. The DCL defects thus further extend the electronic inhomogeneity into YBCO.

critical current↗

2D and 3D Characterization of PtNi Nanowire Electrode Composition and Structure

Extended surface Pt or Pt-M (M = Ni or Co) catalysts are a viable alternative to supported nanoparticle catalysts for the oxygen reduction reaction (ORR) at the cathode in proton exchange membrane fuel cells (PEMFCs). The activity and durability of these catalysts in membrane electrode assemblies (MEAs) are greatly dependent on the surface and bulk properties of the catalyst material, integration with ionomer, and the three-dimensional structure of the electrode, necessitating extensive characterization of the catalyst in the electrode at multiple scales. In this work, extended surface PtNi nanowire-based electrocatalysts derived by spontaneous galvanic displacement, and post-treated to obtain high specific and mass activities, are characterized by X-ray spectroscopies to assess catalyst composition and to determine the extent of Pt-Ni alloying. Transmission X-ray microscopy (TXM) is used to generate two- and three-dimensional images of catalyst layers with varied compositions within the electrode to show the distribution of nanowires and to study Ni dissolution and redeposition within the electrode. These techniques are complemented by electron microscopy, which is used to confirm leaching of nickel from the nanowires and its redeposition within the electrode. This process is shown to have detrimental effect on the MEA performance, which can be at least in part recovered by soaking electrodes in acid. The combination of these techniques provides unprecedented detail of the evolution of the nanowire-based extended surface catalyst and electrode structure guiding the targeted design of high performance electrodes based on this class of materials.

36 MATERIALS SCIENCE↗