Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental data error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Millimeter wave near-field study

The possibility is evaluated of current technology measuring large aperture millimeter wave antennas. Included are a mathematical modeling of system errors, experimental data supporting error model, predictions of system accuracy at millimeter wavelengths, advantage of near-field measurements, and a cost estimate for a facility upgrade. The use is emphasized of software compensation and other inexpensive alternatives to develop a near optimum solution to near-field measurement problems at millimeter wavelengths.

Kefauver, Neill↗
NASA NTRS2007

Analysis of Performance of Stereoscopic-Vision Software

A team of JPL researchers has analyzed stereoscopic vision software and produced a document describing its performance. This software is of the type used in maneuvering exploratory robotic vehicles on Martian terrain. The software in question utilizes correlations between portions of the images recorded by two electronic cameras to compute stereoscopic disparities, which, in conjunction with camera models, are used in computing distances to terrain points to be included in constructing a three-dimensional model of the terrain. The analysis included effects of correlation- window size, a pyramidal image down-sampling scheme, vertical misalignment, focus, maximum disparity, stereo baseline, and range ripples. Contributions of sub-pixel interpolation, vertical misalignment, and foreshortening to stereo correlation error were examined theoretically and experimentally. It was found that camera-calibration inaccuracy contributes to both down-range and cross-range error but stereo correlation error affects only the down-range error. Experimental data for quantifying the stereo disparity error were obtained by use of reflective metrological targets taped to corners of bricks placed at known positions relative to the cameras. For the particular 1,024-by-768-pixel cameras of the system analyzed, the standard deviation of the down-range disparity error was found to be 0.32 pixel.

Kim, Won↗
NASA NTRS1980

Determination of efficiencies, loss mechanisms, and performance degradation factors in chopper controlled dc vehical motors. Section 1: Test program results and recommendations

The conventional series motor model is discussed as well as procedures for obtaining, by test, the parameters necessary for calculating performance and losses. The calculated results for operation from ripple free DC are compared with observed test results, indicating approximately 5% or less error. Experimental data indicating the influence of brush shift and chopper frequency are also presented. Both factors have a significant effect on the speed and torque relationships. The losses and loss mechanisms present in a DC series motor are examined and an attempt is made to evaluate the added losses due to harmonic currents and fluxes. Findings with respect to these losses is summarized.

Hamilton, H. B.↗
NASA NTRS1988

Rheology melts and magmatic suspensions. I - Design and calibration of concentric cylinder viscometer with application to rhyolitic magma

The design and calibration of concentric cylinder viscometer for rhyolitic magma applications are described together with the methods of data reduction and error analysis. Experimental data are presented on two rhyolitic magmas (melt plus a small fraction of vapor) under conditions of varying temperature (1100-1350 C) and shear rate (0.05-13.0/sec) at 100 kPa total pressure. Data obtained include a first reported measurement of a normal stress coefficient for magma.

Spera, Frank J.↗
NASA NTRS1992

Rotational relaxation of molecular H2 at moderate temperatures

A coupled rotation-vibration-dissociation model is used to compute the rotational relaxation times for molecular hydrogen as a function of final temperatures (500-5000 K) in a hypothetical scenario of sudden compression. The theoretical model is based on a master equation solver. The bound-bound and bound-free transition rates have been computed using a quasi-classical trajectory method. A review of the available experimental data on the rotational relaxation of hydrogen is presented, with a critical overview of the method of measurements and data reduction, including the sources of errors. The experimental data are compared with the computed results.

Sharma, S. P.↗
NASA NTRS1994

Rotational relaxation of molecular hydrogen at moderate temperatures

Using a coupled rotation-vibration-dissociation model the rotational relaxation times for molecular hydrogen as a function of final temperature (500-5000 K), in a hypothetical scenario of sudden compression, are computed. The theoretical model is based on a master equation solver. The bound-bound and bound-free transition rates have been computed using a quasiclassical trajectory method. A review of the available experimental data on the rotational relaxation of hydrogen is presented, with a critical overview of the method of measurements and data reduction, including the sources of errors. These experimental data are then compared with the computed results.

COUPLED ROTATION VIBRATION DIS↗
NASA NTRS1972

Statistical accuracy of cosmic radiation neutron component recorders

A method is examined for calculating the error of experimental data from a standard neutron monitor with the multiplicity of neutron generation. It is shown that use of the Poisson distribution to estimate the real statistical error is inadequate. The method proposed is for analysis of low-amplitude periodicities in the cosmic-ray variations.

Dorman, L. I.↗
NASA NTRS1972

The role of compressional viscoelasticity in the lubrication of rolling contacts.

A simple model for the time-dependent volume response of a liquid to an applied pressure step is used to calculate the variation with rolling speed of the traction coefficient in a rolling contact system. Good agreement with experimental results is obtained at rolling speeds above 50 in/sec. At lower rolling speeds a very rapid change in the effective viscosity of the lubricant is predicted. This behavior, in conjunction with shear rate effects, is shown to lead to large errors when experimental data are extrapolated to zero rolling speed.

Harrison, G.↗
NASA NTRS2025

Simulations of Large-Scale Zero Boiloff, Densification, and Solidification of Hydrogen

An Integrated Refrigeration and Storage (IRAS) experimental system called the Ground Operations and Demonstration Unit for Liquid Hydrogen (GODU-LH2) demonstrated the ability store cryogens in a zero boiloff (ZBO) process, and to densify liquid hydrogen by reducing the temperature and pressure down to the triple point resulting in solidification. The incompressible Navier-Stokes was utilized to simulate ZBO, densification, and solidification of liquid hydrogen (LH2) in the IRAS tank. The simulations were performed using a commercially available Computational Fluid Dynamics (CFD) pressure-based mass and momentum flow model and an enthalpy-porosity energy model. Results demonstrated the simulation’s ability to predict time-dependent flow and temperature fields and solid-liquid phase locations for hydrogen during ZBO, densification, and solidification. The simulations showed good agreement with experimental data, with errors within acceptable ranges for temperature and pressure predictions, provided detailed insights into natural convection and solid-liquid phase change dynamics. These findings are critical for the design of future cryogenic fluid management systems.

Computational Fluid Dynamics↗
NASA NTRS1972

Aerodynamic characteristics of the Scout 133R vehicle determined from wind tunnel tests

Bending moments and other associated parameters were measured on a Scout vehicle during a launch through high velocity horizontal winds. Comparison of the measured data with predictions revealed some unexplained discrepancies. Possible sources of error in the experimental data and predictions were considered; one of which is the predicted aerodynamic characteristics. A wind tunnel investigation was initiated, including supersonic force and pressure tests, to better define the aerodynamics. In addition to basic aerodynamic coefficients from the force test, detailed pressure and load distributions along the body were established from the pressure test. Pressure coefficients were integrated to determine normal load distributions, total normal force, and total pitching moment of the body. Comparison of the normal forces from pressure and force tests resulted in agreement within 15%. Comparison of pitching moment data from the two tests resulted in larger differences.

Abramson, F. B.↗
NASA NTRS1983

Relative rate constants for the reactions of atomic oxygen with HO2 anad OH radicals

Relative rate constants for the reactions O + HO2 - OH + O2 (1) and O + OH - H + O2 (2) were obtained by using the discharge-flow resonance fluorescence technique at 2 torr total pressure and 299 K. HO2 radicals were generated by reacting atomic hydrogen with an excess of O2. Quasi-steady-state concentrations of OH and HO2 were established in the presence of excess atomic oxygen. Observed concentration ratios, namely the ratio of the OH concentration to the HO2 concentration, resulted in a value of 1.7 + or 0.2 for k1/k2. The error limits are twice the standard deviation obtained from the data analysis. Overall experimental error is estimated to be + or - 25 percent. This result confirms earlier direct measurements of k1 and k2 which required knowledge of absolute radical or atomic oxygen concentrations.

Keyser, L. F.↗
NASA NTRS1993

The characterization of materials using x ray diffraction

The objectives of this educational exercise are the following: to familiarize the student with x-ray techniques for diffraction pattern generation; to show the student how to utilize x-ray diffraction data for crystal structure determination; and to illustrate systematic and random errors associated with experimental data.

Sprecher, A. F., Jr.↗
NASA NTRS1986

Electron-nitrogen molecular collisions in high-temperature nonequilibrium air

Ab initio calculation of vibrational excitation and deexcitation cross sections of N2 by low energy resonant electron impact have been carried out. The calculation includes initial target state in v = 0-12 and final target state in v = 0-17. The calculated cross sections are found to agree with available experimental data to within reported experimental error. Effect of target rotation has been investigated. Comparison of vibrational excitation cross sections at J = 0, 50, and 150 shows that the major effect of target rotation is to lower the resonance energy. Vibrational excitation and deexcitation rate coefficients are tabulated for electron temperatures of 1100-55,000 K. The present tabulation supercedes an earlier compilation by the Naval Research Laboratory that was derived from experimental data with a factor-of-two error. The tabulated rate coefficients are suited for flowfield modeling of aeroassisted orbital transfer vehicles.

Huo, W. M.↗
NASA NTRS1987

L-band radar backscatter modeling of forest stands

An L-band HH radar backscatter model of a coniferous forest stand is described and compared with SIR-B L-band image data of the Mount Shasta region of northern California. Being based upon an identification and implementation of the expected major components of forest backscattering, the model is simple in form and thus fast computationally, making possible extensive simulations of forest stands. A particularly important component in the model relates to representing the specular reflections expected from tree trunks to the ground and then back to the sensor. These are strong returns and are seen to be necessary to explain both the forest measurements made by the authors and the observations of others. Although the experimental data is limited in quantity and quality, agreement between available experimental and simulated values of forest backscatter is better than the residual uncertainty and relative calibration error of the experimental data, provided the model and experiment are matched initially at one set of parameter values.

Richards, John A.↗
NASA NTRS1986

Parameter estimation and error analysis in environmental modeling and computation

A method for the estimation of parameters and error analysis in the development of nonlinear modeling for environmental impact assessment studies is presented. The modular computer program can interactively fit different nonlinear models to the same set of data, dynamically changing the error structure associated with observed values. Parameter estimation techniques and sequential estimation algorithms employed in parameter identification and model selection are first discussed. Then, least-square parameter estimation procedures are formulated, utilizing differential or integrated equations, and are used to define a model for association of error with experimentally observed data.

Kalmaz, E. E.↗
NASA NTRS1975

Oxygen-to-neon abundance ratio in the solar corona

The oxygen-to-neon abundance ratio in the solar corona is determined to be 4.7 + or - 1.5 on the basis of a relatively model-independent analysis utilizing 25 separate measurements of the O VIII to Ne IX resonance line ratio. The stated uncertainty includes random and possible systematic experimental error in the data but does not include possible error in the calculated flux ratios which have been fitted to the observations. This abundance ratio is smaller than most published results based upon EUV or X-ray observations but is in good agreement with direct measurements of flare cosmic rays.

Acton, L. W.↗
NASA NTRS1975

The effect of initial flaw configuration on leak critical pressure vessel design

The effect of initial flaw shape and depth on the cycles required to produce a pressure leak condition in parent and welded 2219-T87 aluminum was examined for thicknesses from 0.04 to 0.3 inch. Initial flaw aspect ratios of 0.5, 0.3, and 0.15 were examined for tests conducted at a frequency of 4 Hz at room temperature and at 300 F. A computer program developed by Forman was used to predict the cycles to leak curve as a function of initial crack aspect ratio, material thickness, and specimen type and the results compared with the experimental data. Sources of error in the crack propagation analysis and the interface with NDI capabilities are discussed.

Pettit, D. E.↗
NASA NTRS1987

Theoretical study of the N2(+) Meinel system

Atomic natural orbital Gaussian basis sets and large complete-active-space self-consistent field/multireference configuration-interaction wave functions are used to determine the potential curves for the X 2Sigma(+) sub g and A 2Pi sub u states of N2(+). The dependence of the electronic transition moment between the two states on internuclear distance is accurately determined, and is shown to differ significantly from previous determinations. These theoretically determined lifetimes agree with experimental time-of-flight data within stated experimental error bars.

Langhoff, Stephen R.↗