Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Configuration evaluation and criteria plan. Volume 2: Evaluation critera plan (preliminary). Space Transportation Main Engine (STME) configuration study

The unbiased selection of the Space Transportation Main Engine (STME) configuration requires that the candidate engines be evaluated against a predetermined set of criteria which must be properly weighted to emphasize critical requirements defined prior to the actual evaluation. The evaluation and selection process involves the following functions: (1) determining if a configuration can satisfy basic STME requirements (yes/no); (2) defining the evaluation criteria; (3) selecting the criteria relative importance or weighting; (4) determining the weighting sensitivities; and (5) establishing a baseline for engine evaluation. The criteria weighting and sensitivities are cost related and are based on mission models and vehicle requirements. The evaluation process is used as a coarse screen to determine the candidate engines for the parametric studies and as a fine screen to determine concept(s) for conceptual design. The criteria used for the coarse and fine screen evaluation process is shown. The coarse screen process involves verifying that the candidate engines can meet the yes/no screening requirements and a semi-subjective quantitative evaluation. The fine screen engines have to meet all of the yes/no screening gates and are then subjected to a detailed evaluation or assessment using the quantitative cost evaluation processes. The option exists for re-cycling a concept through the quantitative portion of the screening and allows for some degree of optimization. The basic vehicle is a two stage LOX/HC, LOX/LH2 parallel burn vehicle capable of placing 150,000 lbs in low Earth orbit (LEO).

Bair, E. K.↗
NASA NTRS1975

Evaluation program for secondary spacecraft cells: Initial evaluation tests of Eagle-Picher Industries, Incorporated 6.0 ampere-hour, nickel-cadmium spacecraft cells for separator material evaluation

Several groups of nickel cadmium cells were tested for the durability of their separator materials. The cells were rated at 6.0 ampere-hours, and contained double ceramic seals. Two cells in each group were fitted with pressure gauge assemblies. Results are presented for various brands of separator materials.

Harkness, J. D.↗
NASA NTRS1991

Evaluation of Surlyn 8920 as PHE Visor Material and Evaluations of New Adhesives for Improving Bonding Between Teflon and Stainless Steel at Cryogenic Temperature

Two studies are presented, and in the first study, Surlyn 8920 (an ionic and amorphous low density polyethylene made by Dupont) was evaluated as a possible replacement of Plexyglass G as PHE visor material. Four formulations of the polymer were made by adding different amounts of UV stabilizer, energy quencher, and antioxident in a Brabender Plasticorder. The formulated polymers were molded in the form of sheets in a compression molder. Cut samples from the molded sheets were exposed in a weatherometer and tested on Instron Tensile Tester for strength and elongation. Specially molded samples of the formulated polymers were subjected to Charpy Impact Tests. In the second study, preliminary evaluations of adhesives for improvement of bonding between Teflon and stainless steel (SS) were performed. Kapton, a high temperature polyimide made by Dupont, and a rubber based adhesive made by Potter Paint Co., were evaluated against industrial quality epoxy, the current material used to bond Teflon and SS. The degreased surfaces of the SS discs were etched mechanically, with a few of these etched chemically. The surfaces of the SS discs were etched mechanically, with a few of these etched chemically. Bonding strengths were evaluated using lap shear tests on the Instron Tensile Tester for the samples bonded by Kapton and industrial quality epoxy. Bond strengths were also evaluated using a pull test on the Instron for the samples bonded by Potter adhesive (CWL-152) and industrial quality epoxy. Based on limited lap shear data, Kapton gave bond strength favorable compared to that of industrial epoxy. Based on limited pull test data, Kapton bonded and CWL-152 bonded samples showed poor strength compared to epoxy bonded sample.

Ray, Asit K.↗
NASA NTRS2015

Appendix A: NAS-Wide Encounter Rate Evaluation Using Historical Radar Data and the Airspace Concept Evaluation System (ACES)

Regulations that establish operational and performance requirements for unmanned aircraft systems (UAS) are being developed by a consortium of government, industry and academic institutions. Those requirements will apply to detect-and-avoid (DAA) systems and other equipment necessary to integrate UAS with the National Airspace System (NAS) and are determined according to their contribution to the overall level of safety required to operate in the airspace. Several key gaps must be addressed in order to link equipment requirements to an airspace level of safety. Foremost among these is the calculation of the relative effectiveness of a particular system to mitigate violations of a separation standard with other aircraft, which is known as the systems risk ratio. The risk ratio is calculated as the probability of mid-air collision with a DAA system divided by the probability of mid-air collision without a DAA system. The risk ratio of a DAA system, in combination with the risk ratios of other collision avoidance mitigations, will determine the overall safety of the airspace measured in terms of the number of mid-air collisions per flight hour. Defining the required risk ratio that the DAA system needs to ensure the safety of the airspace requires an evaluation of the current airspace and a simulated evaluation that incorporates UAS aerodynamic performance and the mission characteristics of future UAS operations that are projected to be conducted in areas that interact with current operations. These evaluations will produce the frequency of encounters that currently exist in the airspace and those that could be generated with the introduction of UAS. Together, the frequency of encounters, an evaluation of unmitigated risk of collision, and a desired level of safety of the airspace will yield a required risk ratio of the DAA system. This study will focus on evaluating the encounter rates between aircraft based on historical radar data and encounter rates that could occur based on simulated UAS missions.

Unmanned Aircraft Systems↗
NASA NTRS2003

The case for applying an early-lifecycle technology evaluation methodology to comparative evaluation of requirements engineering research

The premise of this paper is taht there is a useful analogy between evaluation of proposed problem solutions and evaluation of requirements engineering research itself. Both of these application areas face the challenges of evaluation early in the lifecycle, of the need to consider a wide variety of factors, and of the need to combine inputs from multiple stakeholders in making thse evaluation and subsequent decisions.

technology transfer↗
NASA NTRS1981

A review and evaluation of the Langley Research Center's Scientific and Technical Information Program. Results of phase 5. Design and evaluation of STI systems: A selected, annotated bibliography

A selected, annotated bibliography of literature citations related to the design and evaluation of STI systems is presented. The use of manual and machine-readable literature searches; the review of numerous books, periodicals reports, and papers; and the selection and annotation of literature citations were required. The bibliography was produced because the information was needed to develop the methodology for the review and evaluation project, and a survey of the literature did not reveal the existence of a single published source of information pertinent to the subject. Approximately 200 citations are classified in four subject areas. The areas include information - general; information systems - design and evaluation, including information products and services; information - use and need; and information - economics.

Pinelli, T. E.↗
NASA NTRS1987

Configuration evaluation and criteria plan. Volume 2: Evaluation criteria plan (update). Space Transportation Main Engine (STME) configuration study

Candidate main engine configurations which enhance vehicle performance, operation and cost are identified. These candidate configurations are evaluated and the configurations which provide significant advantages over existing systems are selected for consideration for the next generation of launch vehicles. The unbiased selection of the Space Transportation Main Engine (STME) configuration requires that the candidate engines be evaluated against a predetermined set of criteria which must be properly weighted to emphasize critical requirements defined prior to the actual evaluation. During a prior study of the STME a Gas Generator Cycle engine was selected for conceptual design, with emphasis on reusability, reliability and low cost while achieving good performance. In this study emphasis is on expendable application of the STME while maintaining low cost and high reliability.

Bair, E. K.↗
NASA NTRS1991

Fuel Systems Architecture (FSA) evaluation criteria and concept evaluation methodology

Consideration is given to two methods developed for the evaluation, screening, and ranking of concepts for Space Exploration Initiative vehicle propellant management systems. The methods selected for handling this multicriteria decision problem are based on the utility theory which transforms both qualitative and quantitative criteria into a nondimensional utility scale for comparison of dissimilar figures of merit. The development of the resultant FSA evaluation criteria and concept evaluation methodology is summarized.

Hendershot, J. E.↗
NASA NTRS1996

Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright-Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level 1/Level 2 performance. Lateral gross-acquisition testing results in Level 1/Level 2 ratings below 45 deg angle of attack, degrading into Level 3 as angle of attack increases. The fine-tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal-Smith, bandwidth, Smith-Geddes, and military specifications.

Stoliker, Patrick C.↗
NASA NTRS1996

Characterization and Evaluation of Acid Rain in East Central Florida from 1978 to 1995 and Evaluation of Some Chromatographic/Spectroscopic Results from Leachate Samples from CELSS

The results of monitoring the chemical composition of rain in east-central Florida have shown that the rain is moderately acid. The measured acidity of rain is less than that observed in other regions of the U. S., however, it does suggest that the level of acidity is substantial. The annual chemical composition of rain at UCF and at KSC has shown moderate variability. Extreme daily and monthly variations are observed, however these variations are not addressed here. The total ionic composition of rain collected at FL99 is greater than that for rain collected at UCF, however this can be accounted for by site proximity to the ocean with the accompanying marine influence. Difference in acidity data collected from the UCF and FL99 sites which are separated by 50 km may be due in part to the differences that have been observed between laboratory and field pH measurements. Trend assessment for precipitation composition requires evaluation of data that covers some minimum time period. In fact, the subdivision of the multi-year UCF record into individual 10 year records as described above can lead to the conclusion that a significant increase, a significant decrease or no trend exists for acidity depending upon the time period chosen for evaluation. Trend evaluation has also been accomplished by linear and nonlinear regression analysis using monthly volume weighted average concentrations and deposition using the UCF data set and some of the Florida NADP data set.

Madsen, Brooks C.↗
NASA NTRS1997

Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg. and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level l/Level 2 performance. Lateral gross-acquisition testing results in Level l/Level 2 ratings below 45 deg. angle of attack, degrading into Level 3 as angle of attack increases. The fine tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg. angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal Smith, bandwidth, Smith-Geddes, and military specifications.

Stoliker, Patrick C.↗
NASA NTRS2009

Chemical Kinetics and Photochemical Data for Use in Atmospheric Studies Evaluation Number 16. Supplement to Evaluation 15: Update of Key Reactions

This is the supplement to the fifteenth in a series of evaluated sets of rate constants and photochemical cross sections compiled by the NASA Panel for Data Evaluation. The data are used primarily to model stratospheric and upper tropospheric processes, with particular emphasis on the ozone layer and its possible perturbation by anthropogenic and natural phenomena. Copies of this evaluation are available in electronic form and may be printed from the following Internet URL: http://jpldataeval.jpl.nasa.gov/.

atmospheric modeling↗
NASA NTRS1986

Performance Evaluation Tests for Environmental Research (PETER): evaluation of 114 measures

The goal of the Performance Evaluation Tests for Environmental Research (PETER) Program was to identify a set of measures of human capabilities for use in the study of environmental and other time-course effects. 114 measures studied in the PETER Program were evaluated and categorized into four groups based upon task stability and task definition. The Recommended category contained 30 measures that clearly obtained total stabilization and had an acceptable level of reliability efficiency. The Acceptable-But-Redundant category contained 15 measures. The 37 measures in the Marginal category, which included an inordinate number of slope and other derived measures, usually had desirable features which were outweighed by faults. The 32 measures in the Unacceptable category had either differential instability or weak reliability efficiency. It is our opinion that the 30 measures in the Recommended category should be given first consideration for environmental research applications. Further, it is recommended that information pertaining to preexperimental practice requirements and stabilized reliabilities should be utilized in repeated-measures environmental studies.

NASA Program Space Medicine↗
NASA NTRS1971

Pyrotechnic hazards classification and evaluation program. Phase 3, segments 1-4: Investigation of sensitivity test methods and procedures for pyrotechnic hazards evaluation and classification, part A

The findings, conclusions, and recommendations relative to the investigations conducted to evaluate tests for classifying pyrotechnic materials and end items as to their hazard potential are presented. Information required to establish an applicable means of determining the potential hazards of pyrotechnics is described. Hazard evaluations are based on the peak overpressure or impulse resulting from the explosion as a function of distance from the source. Other hazard classification tests include dust ignition sensitivity, impact ignition sensitivity, spark ignition sensitivity, and differential thermal analysis.

Source record↗
NASA NTRS1973

Evaluation of coated columbium alloy heat shields for space shuttle thermal protection system application. Volume 2, phase 2: Subsize heat shield and small size TPS evaluation

Initially a trade study was conducted of seven heat shield configurations. These were evaluated for structural reliability, fabricability, weight, inspectability, and refurbishability. Two concepts, a tee-stiffened and an open corrugation, were selected as offering the most potential for system success. Fourteen subsize heat shields of a full scale section were fabricated from C-129Y and Cb-752 and silicide coated with R-512E. These subsize panels were subjected to a simulated flight profile representing temperature, local surface pressures, and applied pressure differential loads. All corrugated panels of both alloys sustained 100 cycles without structural or coating failure. All Cb-752/R-512E panels performed well with one panel being successfully repaired after 66 cycles and completing 100 cycles. As a result of this evaluating the Cb-752/R-512E system was selected for hardware application during the subsequent phases. In addition, the tee-stiffened configuration was selected for further development and application in Phase III. This selection was based on an overall assessment of relative weight, cost, and structural performance of the tee-stiffened and open corrugation TPS.

Black, W. E.↗
NASA NTRS1986

Technical evaluation report of AGARD Technical Evaluation Meeting on Unsteady Aerodynamics: Fundamentals and Applications to Aircraft Dynamics

From May 6 to 9, 1985, the Fluid Dynamics Panel and Flight Mechanics Panel of AGARD jointly arranged a Symposium on Unsteady Aerodynamics-Fundamentals and Applications to Aircraft Dynamics at the Stadthall, Goettingen, West Germany. This Symposium was organized by an international program committee chaired by Dr. K. J. Orlik-Ruckemann of the Fluid Dynamics Panel. The program consisted of five sessions grouped in two parts: (1) Fundamentals of Unsteady Aerodynamics; and (2) Applications to Aircraft Dynamics. The 35 papers presented at the 4 day meeting are published in AGARD CP 386 and listed in the Appendix. As the papers are already available and cover a very wide field, the evaluators have offered brief comments on every paper, followed by an overall evaluation of the meeting, together with some general conclusions and recommendations.

Mabey, D. G.↗
NASA NTRS2011

Evaluation of Robotic Systems to Carry Out Traverse Execution, Opportunistic Science, and Landing Site Evaluation Tasks

This report covers the execution of and results from the activities proposed and approved in Exploration Analogs and Mission Development (EAMD) Field Test Protocol HMP2010: Evaluation of Robotic Systems to carry out Traverse Execution, Opportunistic Science, and Landing Site Evaluation Tasks. The field tests documented in this report examine one facet of a larger program of planetary surface exploration. This program has been evolving and maturing for several years, growing from a broad policy statement with a few specified milestones for NASA to an international effort with much higher fidelity descriptions of systems and operations necessary to accomplish this type of exploration.

Hoffman, Stephen J.↗