Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ethyl methyl carbonate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigating the effect of screen-printed structured graphite electrodes with low tortuosity for high-capacity and fast-charging lithium-ion batteries

A flexible screen-printed graphite electrode was fabricated as an anode for developing fast-charging lithium-ion batteries with low tortuosity. A homogenous anode ink was prepared by mixing graphite as the active material, carbon black (C45) as the conductive additive, and polyvinylidene fluoride (PVDF) as the binder in N-Methyl-2-pyrrolidone (NMP) solvent. The ink was deposited on a flexible copper foil via a stainless-steel screen consisting of an array of pores, that act as secondary pore networks (SPNs), using the screen-printing process. Lithium-ion battery half-cells were assembled using the printed graphite anode, lithium metal foil as the counter electrode, and 1.2 M lithium hexafluorophosphate (LiPF 6 ) in ethyl carbonate: ethyl methyl carbonate (EC: EMC = 3:7) as the electrolyte. The effect of SPNs on the cell performance was investigated by performing formation, rate and cycling tests on the assembled cells, at different C-rates. It was observed that the cells consisting of SPNs with a pore size of 100 μm and edge-to-edge distance of 100 μm between the pores exhibited significantly higher specific capacities of 168 and 129 mAh/g when compared to reference cells without SPNs, which had capacities of 120 and 85 mAh/g, at high C-rates of 4 C and 6 C, respectively. The cells with SPNs also demonstrated excellent cycling performance with ~ 95% capacity retention after 100 cycles at 2 C.

Fast charging lithium-ion battery↗
DOE OSTI2025

Impact of Electrolyte Solvent on Li 4 Ti 5 O 12 /LiNi 0.90 Mn 0.05 Co 0.05 O 2 Battery Performance for Behind-the-Meter Storage Applications

Behind-the-Meter Storage (BTMS) systems require dedicated development of battery materials that target long cycle life and low cost at the system level. Pairing Li 4 Ti 5 O 12 (LTO) and LiNi 0.9 Mn 0.05 Co 0.05 O 2 (NMC90-5-5) shows promise to achieve targets for BTMS applications; however, minimal literature is available that discusses electrolyte solvent selection for this pairing. This study explores the role of electrolyte solvent on cycle life in LTO/NMC90-5-5 batteries. Four model electrolytes are evaluated; the baseline, Gen2, is compared with 1M LiPF 6 added to each of three separate solvents: ethylene carbonate (EC), ethyl methyl carbonate (EMC), and fluoroethylene carbonate (FEC). An additional consideration is that NMC90-5-5 undergoes an H2→H3 phase transition that allows for a significant increase to capacity; however, it’s unclear how this phase transition impacts electrolyte stability and cycle life. Therefore, the phase transition is avoided or accessed by cycling to 2.6V or 2.7V, respectively. The cells with Gen2, cycled to 2.6V, show the highest capacity retention due to EC passivating the LTO, EMC improving stability at the NMC90-5-5, and avoiding increased degradation from the 2.7V protocol. Despite having high initial reactivity that causes Li-depletion, FEC was the only solvent to avoid increased degradation when moving to the higher termination voltage.

25 ENERGY STORAGE↗
DOE OSTI2026

Networks of electrochemical oxidation of common lithium-ion Battery solvents revealed by NMR spectroscopy

Raising the upper cutoff voltage of lithium-ion batteries (LIBs) to increase energy density often exceeds the electrolyte’s anodic stability limit, accelerating degradation and creating a major durability tradeoff. Designing electrolytes that can sustain long-term high-voltage cycling requires a clearer understanding of the fundamental mechanisms occurring when commercial carbonate solvents oxidize. Here, to this end, simplified single-salt, single-solvent formulations of LiClO 4 and LiPF 6 in dimethyl carbonate (DMC), ethylene carbonate (EC), or ethyl methyl carbonate (EMC) were anodically electrolyzed on inert electrodes and monitored for extended periods of time using 1 H, 13 C, 19 F, and 35 Cl nuclear magnetic resonance (NMR) spectroscopy. The controlled environment of the experiments, coupled to the unique sensitivity of NMR, unveiled novel metastable intermediates and the formation of branching networks of products with temporal evolution. Oxidation of the pristine solvent primarily proceeds through a radical pathway that also produces highly reactive protons but faces competition from a second pathway involving a radical carbocation intermediate. In all cases, the intermediates follow a variety of downstream pathways that can intersect with each other. The concomitant network of reactions represents a significant increase in complexity compared to common descriptions in the literature, yet, critically, it helps explain the wide range of products typically identified in electrolyte oxidation in complete cells. The results highlight the need for refocusing fundamental research on anodic stability to analysis of the hierarchy of reaction networks to better inform efforts to mitigate the detrimental effects on battery performance, including prevention and harvesting of proton and radical products.

Electrolytes↗
DOE OSTI2025

Reactivity of Carbonate Solvent Electrolytes on Lithium Silicon Anodes

Silicon (Si) is promising for lithium-ion battery (LIB) anodes due to their high theoretical capacity and low electrochemical potential. However, significant challenges remain, including severe volumetric expansion during cycling and the electrochemical instability of electrolytes, which leads to the formation of a nonuniform solid electrolyte interphase (SEI). To investigate SEI formation mechanisms, computational molecular dynamics simulations offer valuable insights. In this work, we examine the trajectories and charge transfer behavior of lithium hexafluorophosphate (LiPF 6 ) salt with various solvent compositions using density functional theory (DFT) and ab initio molecular dynamics (AIMD). Among the tested electrolyte systems, LiPF 6 with vinylene carbonate (VC) added to ethyl methyl carbonate (EMC) exhibits the lowest reactivity with the Si anode. In contrast, the effects of fluoroethylene carbonate (FEC) and VC depend on whether the primary solvent is EMC alone or a mixture of ethylene carbonate (EC) and EMC. Moreover, we show that electrolyte reactivity varies with the degree of lithiation of the Si anode (LiSi vs Li 15 Si 4 ) and under different charge states. To decouple electrolyte reactivity from surface effects, we analyze the dissociation and formation energies of individual species from solvated configurations. Overall, these first-principles-based findings provide a strategic foundation for electrolyte design to improve cycling stability and extend calendar life in LIBs using Si anodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Theory of Cation Solvation in the Helmholtz Layer of Li-Ion Battery Electrolytes

The solvation environments of Li + in conventional nonaqueous battery electrolytes, such as LiPF 6 in mixtures of ethylene carbaronate (EC) and ethyl methyl carbonate (EMC), are often used to rationalize transport properties and solid electrolyte interphase (SEI) formation. Solvation environments in the compact electrical double layer (EDL) next to the electrode, also known as the Helmholtz layer, determine (partially) what species can react to form the SEI, with bulk solvation environments often being used as a proxy. Here, we develop and test a theory of cation solvation in the Helmholtz layer of nonaqueous Li-ion battery electrolytes. First, we validate the theory against bulk and diffuse EDL atomistic molecular dynamics (MD) simulations of LiPF 6 EC/EMC mixtures as a function of surface charge, where we find the theory can qualitatively capture the solvation environments. Next, we turn to the Helmholtz layer, where we find the main effect of the solvation structures next to the electrode is an apparent reduction in the number of binding sites between Li + and the solvents, again where we find reasonable agreement with our developed theory. Finally, by solving a simplified version of the theory, we find that the probability of Li + binding to each solvent remains equal to the bulk probability, suggesting that the bulk solvation environments are a reasonable place to start when understanding battery electrolytes. Our developed formalism can be parametrized from bulk MD simulations and used to predict the solvation environments in the Helmholtz layer through reducing the number of available coordination sites, which can be used to determine what could react and form the SEI.

Helmholtz↗
DOE OSTI2025

Delineating the Factors Impacting the Electrochemical Behavior of Single-Crystal High-Nickel Layered Oxide Cathodes

High-nickel (Ni) (≥80%) single-crystal LiNi 1-x-y Mn x Co y O 2 (NMCs) have garnered recent interest as cathodes in lithium (Li)-ion batteries (LIBs). However, capacity fade at high voltages, particularly after the onset of the H2–H3 phase transition, hampers their viability. In this study, single-crystal LiNi 0.8 Mn x Co 0.2-x O 2 (x = 0.2, 0.1, 0) are synthesized and tested in LiPF 6 in ethyl methyl carbonate-based electrolytes, with and without monofluoroethylene carbonate and LiF 2 PO 2 additives, to clarify the effects of Co/Mn ratio and surface stabilization on high-voltage cycling degradation. By imposing a kinetic barrier to the accessible H2–H3 capacity, surface reconstruction is identified as the primary driver of high-voltage capacity loss, being greater in the Co-free cathode and in the absence of fluorinated electrolyte components. This is attributed to a synergy between increased mechanical stress due to worsened bulk and interfacial H2–H3 kinetics and decreased interfacial stability due to the poor passivating capability of the electrolyte. Here, the findings highlight the importance of limiting cathode impedance growth during high-voltage cycling, which can be achieved by tuning bulk dopants and electrolyte chemistry.

25 ENERGY STORAGE↗
DOE OSTI2025

Critical Insights into Solvent Choice for High-Voltage Organosulfur Electrolytes

Organosulfur electrolytes are promising candidates for enabling high-voltage cathodes due to their superior oxidative stability compared to conventional carbonate-based systems. However, their viscous nature and inability to passivate the anode necessitate the use of passivating agents and diluents to achieve meaningful charge/discharge rates. In this study, we investigate the use of cyclic fluorinated carbonates (CFCs) to form passivating interphases on electrode surfaces, aiming to optimize electrolyte performance in high-voltage systems. Electrolyte formulations containing 1.2 M LiPF 6 in a CFC:sulfone:1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TTE) mixture (2/5/3 V/V/V) were assessed in full-cell configurations with a LiNi 0.8 Mn 0.1 Co 0.1 O 2 (FCG-NMC) cathode and a 4.5 V upper cutoff potential. The results reveal that 3-3-3-trifluoropropylene carbonate (TFPC) combined with ethyl methyl sulfone (EMS) optimizes electrolyte performance, resulting in lower resistance buildup and reduced capacity loss compared to commercial electrolytes. We also explore the failure mechanisms of several carbonate/sulfone mixtures and identify key considerations for electrolyte compatibility in high-voltage systems. TFPC enhances cycling stability and lowers overall cell resistance, while fluoroethylene carbonate (FEC) formulations, despite higher ionic conductivity, fail to form adequate passivation layers, leading to rapid capacity loss. Additionally, EMS provides superior physical properties that avoid common failure modes seen with other sulfone solvents like methyl isopropyl sulfone and tetramethylene sulfone. Furthermore, this study underscores the importance of carefully selecting passivating carbonates and sulfone solvents to improve electrolyte performance and expand the viability of high-voltage electrolyte systems.

LiNi0.8Mn0.1Co0.1O2 cathode↗
DOE OSTI2026

Transient hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation. I. Conformer- and isomer-resolved infrared spectra

Transient carbon-centered hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation are characterized by infrared (IR) action spectroscopy under jet-cooled conditions with selective detection of hydroxyl (OH) radical products. Two distinct •QOOH isomers with radical sites at a primary carbon of one of the methyl groups (β-Me) or a secondary carbon (β-Et) of the ethyl group are identified by comparison with theoretically calculated IR absorption features for multiple conformers, including C–O, ethyl, and O–O torsions of the two isomers. Here, a master-equation analysis is developed and utilized to explore the conformational cooling process and the resultant conformer population distributions of the two isomers. Most of the IR features observed, including those in the strong fundamental and first overtone OH stretch regions as well as weaker combination bands involving OH stretch with torsion or OOH bend, are in good accord with computed anharmonic frequencies for the most populated conformers of the •QOOH_Et isomer. Relatively weak IR features most evident in the fundamental and first overtone OH stretch regions are ascribed to multiple conformers of the less stable •QOOH_Me isomer, along with a weak feature that is uniquely attributed to a combination band involving asymmetric CH 2 stretch and HCH bend of •QOOH_Me.

Chemical reaction jet spectroscopy↗
DOE OSTI2026

Transient hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation. II. Isomer-resolved unimolecular dynamics

Transient carbon-centered hydroperoxyalkyl intermediates (•QOOH) in isopentane oxidation are characterized by their time- and energy-resolved unimolecular dissociation dynamics to hydroxyl (OH) and cyclic ether products. Two distinct •QOOH isomers are examined with radical sites at a primary carbon of one of the methyl groups (β-Me) or a secondary carbon (β-Et) of the ethyl group. Energy-dependent unimolecular rates are obtained from the time-dependent appearance of OH products for the two isomers and compared with statistical microcanonical rates computed using RRKM theory, including heavy-atom tunneling, based on high-level theoretical calculations. A benchmark-corrected approach is utilized to compute high-accuracy stationary-point energies, most importantly, transition-state barriers, for the •QOOH_Me and •QOOH_Et isomers in isopentane oxidation, building on higher-level reference calculations for the oxidation of ethane (C 2 H 5 O 2 ) and propane (C 3 H 7 O 2 ), respectively. Here, the measured rates are compared with RRKM calculations incorporating the benchmark-corrected transition-state parameters, a vibrationally adiabatic multidimensional hindered-rotor treatment of key torsions, and quantum tunneling. Agreement between experiment and theory validates the statistical description and shows faster decay for •QOOH_Et due to its lower barrier. Both β-QOOH isomers decay almost exclusively to OH + cyclic ether products under the conditions studied.

Oxidation processes↗
DOE OSTI2026

Solvent–Diluent Engineering of Normal-Concentration Organosulfur Electrolytes for High-Voltage Lithium-Ion Batteries

Enabling high‑voltage batteries depends critically on rational electrolyte design. Conventional carbonate electrolytes with LiPF 6 suffer from insufficient oxidative stability, motivating the use of lithium bis(fluorosulfonyl)imide (LiFSI) for its superior high‑temperature and high‑voltage performance. However, LiFSI is relatively costly, and its electrolytes often require high concentrations to suppress aluminum current collector corrosion in cathode architectures and to adequately passivate electrode interfaces. Here, a low‑concentration LiFSI electrolyte is realized by combining a high‑voltage organosulfur solvent, ethyl methyl sulfone (EMS), with a non‑solvating fluorinated diluent, fluorobenzene (FB). Extended cycling of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) full cells to 4.5 V reveals substantial long‑term performance advantages over conventional carbonate electrolytes. Comparison with a popular cyclic sulfone, tetramethylene sulfone (TMS), shows that ring‑containing structures such as TMS strongly influence passivation behavior, ultimately limiting performance and narrowing the viable operating window. Overall, EMS is identified as a uniquely stable solvent for LiFSI‑based electrolytes operating at moderately high voltages.

Dato, Michael A. [Argonne National Laboratory (ANL↗
DOE OSTI2026

Directed Gas-Phase Formation of The Propargyl Family of Resonance-Stabilized Radicals in The Reactions of Ground-State Carbon Atoms (C; 3 P j ) with Butene Isomers (C 4 H 8 ): Dimethylpropargyl and Ethylpropargyl

The propargyl radical (C 3 H 3 ) is the simplest resonance-stabilized free radical (RSFR), but how does stepwise methyl substitution in the alkene reactant affect its dynamics of their formation? We report a crossed molecular beam study of the reactions of atomic carbon (C, 3 P j ) with four butene isomers (C 4 H 8 ) under single collision conditions at a collision energy of 28 ± 2 kJ mol −1 . Barrierless addition of atomic carbon to the alkene C=C bond triggers ring opening to triplet substituted allenes—a de facto insertion mechanism—followed by unimolecular decomposition via atomic hydrogen (H), methyl (CH 3 ) or ethyl (C 2 H 5 ) loss, yielding a family of propargyl‑type RSFRs. RRKM calculations reveal that the branching ratios are highly sensitive to the alkene structure. While the methyl loss channel, affording 1‑methylpropargyl, dominates for 2 butenes (80–90%), the predicted hydrogen atom loss channel (≈10%) leading to 1,3 dimethylpropargyl is identified in the experiment by comparison with theoretical energetics. For isobutene, a near‑equal competition is seen, with the reaction producing 3‑methylpropargyl (≈50%) and 1,1‑dimethylpropargyl (≈40%), along with 2‑vinylallyl (≈5%), whose formation is supported by the experimental data. Most notably, the reaction with 1 butene uniquely favors an enthalpically driven hydrogen shift, eventually producing 1 vinylallyl (≈38%), which is assigned based on the excellent agreement between the measured and calculated reaction exothermicity. Rapid entropically favored fragmentation channels yield ≈40% of propargyl type species (propargyl, 1- and 3-ethylpropargyls), slightly outcompeting the allyl type product. Furthermore, these results establish a systematic progression from C 2 H 4 to C 4 H 8 , where the increasing alkyl substitution unlocks new fragmentation channels, providing a versatile gas phase route to alkylated RSFRs—key intermediates in the growth of methylated and ethylated PAHs and aliphatic chains in combustion and cold interstellar environments (molecular clouds).

Alkyls↗
DOE OSTI2025

Oxidation of n-alkanes using TS-1 and H 2 O 2 : Effects of chain length and solvents

The selective oxidation of n-C 8 H 18 , n-C 12 H 26 , n-C 16 H 34 , n-C 20 H 42 , and n-C 36 H 74 was studied with a goal of using these as models to provide insight into how to functionalize polyolefins. Reactions were carried out using a TS-1 catalyst and H 2 O 2 in a batch reactor with different cosolvents, including methanol, acetone, acetonitrile, methyl ethyl ketone, and methyl butyl ketone. Rates decreased with increasing alkane size, possibly due to the reduced solubility of larger alkanes into the water-rich phases. Cosolvents that promote the partitioning of alkanes in the aqueous phase increased the rates. 1 H NMR spectroscopy demonstrated that ketones were the primary products, although some alcohols also formed. There was preferential reaction at the 2 position in the alkanes, but reaction at central carbons was also observed. The results of this study suggest strategies for using this catalytic chemistry to functionalize polyolefins.

Alkane oxidation↗
DOE OSTI2025

Constructing synthetic organosulfur additive for high voltage lithium-ion batteries

Despite its high anodic stability, common organosulfur solvents such as ethyl methyl sulfone and sulfolane typically exhibit poor solid-electrolyte interphase (SEI) formation capability. Here, to address this, the fluorinated organic sulfate 4-(trifluoromethyl)-1,3,2-dioxathiolane 2,2-dioxide (TFDTD) was developed as an effective additive for tailoring organosulfur-based electrolytes in lithium-ion batteries. This development was guided by the functionality selection principle and careful evaluation of feasibility in organic synthesis. TFDTD can be readily synthesized through the reaction between trifluoropropylene glycol and sulfuryl chloride. The ring structure of the organic sulfate enables the formation of a stable SEI on the anode, while the fluorination of the sulfate not only enhances its chemical stability and oxidation potential, but also its effectiveness to protect the anode by increasing its reduction potential, rendering it preferentially reduced on the anode surface before the decomposition of other electrolyte components. Introducing TFDTD facilitates the generation of a robust solidelectrolyte interphase on the graphite anode, significantly enhancing cell performance. Moreover, coupling the use of TFDTD with vinylene carbonate provides further protection on the cathode surface, enabling exceptionally stable, high-voltage, long-term cycling of Gr||NMC full cells.

Functionality selection principle↗
DOE OSTI2026

Metallic Pd–Cu Alloy Phases Drive Selective Heterogeneous Electrochemical Ketonization of 1-Butene

Electrification of 2-butanone synthesis via ketonization of 1-butene offers a viable pathway to reduce emissions associated with its production as a commodity chemical and enhance its prospects as a clean carbon-based synthetic fuel. However, the direct electrochemical ketonization of alkenes remains underexplored, with previous studies largely limited to epoxides and glycols. Herein, we report an electrochemical heterogeneous system optimized for 1-butene ketonization, converting 1-butene to 2- butanone using a bimetallic PdCu catalyst in aqueous electrolytes. The system achieves a Faradaic efficiency of 20% and a partial current density of 0.6 mA/cm 2 at 1.8 V RHE . In comparison to monometallic Pd and oxidized PdCu analogs, the PdCu catalyst doubles the ketonization Faradaic efficiency and quadruples the production rate. Postelectrolysis characterization reveals that PdCu preserves the surface metallic alloy phase under anodic polarization, which likely accounts for the enhanced ketonization activity. This work demonstrates the significance of the Pd−Cu speciation dynamics and provides a framework for designing selective electrocatalysts for alkene ketonization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗