Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “etc)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Explosive Transient Camera (ETC) Program

Since the inception of the ETC program, a wide range of new technologies was developed to support this astronomical instrument. The prototype unit was installed at ETC Site 1. The first partially automated observations were made and some major renovations were later added to the ETC hardware. The ETC was outfitted with new thermoelectrically-cooled CCD cameras and a sophisticated vacuum manifold, which, together, made the ETC a much more reliable unit than the prototype. The ETC instrumentation and building were placed under full computer control, allowing the ETC to operate as an automated, autonomous instrument with virtually no human intervention necessary. The first fully-automated operation of the ETC was performed, during which the ETC monitored the error region of the repeating soft gamma-ray burster SGR 1806-21.

Ricker, George↗
NASA NTRS1984

The explosive transient camera (ETC) - An instrument for identification of gamma ray burst optical counterparts

The ETC is a wide-field (3-steradian) electronic camera array which can detect coincident optical flashes with durations of 0.1 to 100 sec. Each array element is a 20 x 30 deg FOV, cooled CCD detector. An optical transient (possibly associated with a gamma ray burst) as faint as B = +11 (1 sec duration) can be detected with an S/N of not less than 20, and its position determined to an accuracy of + or - 10 arcsec. Candidate events 1000 times fainter than the archived event (plate taken in 1928) reported for the November 19, 1978 gamma ray burst by Schaefer (1981) should be detectable in real time. A prototype camera was tested in April 1982 to establish sky background levels and spurious event rejection schemes; a 1/2-ster test version of the ETC was planned for operation in early 1984; expansion to the full 3-ster complement of 16 detectors at each of two sites was planned for the 1984-1985 period.

Ricker, G. R.↗
NASA NTRS2014

International Space Station (ISS) External Thermal Control System (ETCS) Loop A Pump Module (PM) Jettison Options Assessment

On December 11, 2013, the International Space Station (ISS) experienced a failure of the External Thermal Control System (ETCS) Loop A Pump Module (PM). To minimize the number of extravehicular activities (EVA) required to replace the PM, jettisoning the faulty pump was evaluated. The objective of this study was to independently evaluate the jettison options considered by the ISS Trajectory Operations Officer (TOPO) and to provide recommendations for safe jettison of the ETCS Loop A PM. The simulation selected to evaluate the TOPO options was the NASA Engineering and Safety Center's (NESC) version of Program to Optimize Simulated Trajectories II (POST2) developed to support another NESC assessment. The objective of the jettison analysis was twofold: (1) to independently verify TOPO posigrade and retrograde jettison results, and (2) to determine jettison guidelines based on additional sensitivity, trade study, and Monte Carlo (MC) analysis that would prevent PM recontact. Recontact in this study designates a propagated PM trajectory that comes within 500 m of the ISS propagated trajectory. An additional simulation using Systems Tool Kit (STK) was run for independent verification of the POST2 simulation results. Ultimately, the ISS Program removed the PM jettison option from consideration. However, prior to the Program decision, the retrograde jettison option remained part of the EVA contingency plan. The jettison analysis presented showed that, in addition to separation velocity/direction and the atmosphere conditions, the key variables in determining the time to recontact the ISS is highly dependent on the ballistic number (BN) difference between the object being jettisoned and the ISS.

Murri, Daniel G.↗
DOE OSTI2021

Data supporting manuscript from L. Sheneman, G. Stephanopoulos, A.E. Vasdekis titled "Deep learning classification of lipid droplets in quantitative phase images" as currently under review at PLOS ONE. This includes: 1) raw and binary labeled Quantitative Phase Images (QPI) of Y. lipolytica cells used in the analyses described within the manuscript. 2) various derived data including classifier scores, etc.

Data supporting manuscript from L. Sheneman, G. Stephanopoulos, A.E. Vasdekis titled "Deep learning classification of lipid droplets in quantitative phase images" as currently under review at PLOS ONE. This includes: 1) raw and binary labeled Quantitative Phase Images (QPI) of Y. lipolytica cells used in the analyses described within the manuscript. 2) various derived data including classifier scores, etc.

ANN↗
NASA NTRS1973

Steady state analysis of Energy Transfer Control (ETC) and compressor bleed concepts of remote lift fan control

Two new concepts of control for VTOL aircraft remote lift fans are analyzed and discussed. Both concepts employ flow transfer among lift fans located in separate parts of the aircraft in order to obtain attitude control moments in hover and low-speed flight. The results presented are from a digital computer analysis of the YJ97/LF460 remote drive turbofan, although qualitative conclusions should apply to any remote fan system. The basic operating principles of the two systems are described, and their steady-state moment generating capabilities are discussed. Lift-recovery strategies for component failures are also analyzed.

Sellers, J. F.↗
NASA NTRS1974

Plant size, etc., and aerial films

Chlorophyll concentration of chlorotic leaves, expressed as milligrams of chlorophyll per cubic centimeter of leaf volume, was positively correlated to film density readings. Images on the film became darker as chlorophyll concentration increased. Plant size was not related to density readings.

Gausman, H.↗
NASA NTRS1989

Resource letter ETC-1 - Extraterrestrial civilization

This resource letter provides a guide to the literature about intelligent life beyond the human sphere of exploration. It offers a starting point for professionals and academics interested in participating in the debate about the existence of other technological civilizations or in SETI. It can also serve as a reference for teaching. Several extensive bibliographies are cited.

Kuiper, Thomas B. H.↗
NASA NTRS1936

Tank Tests of the Effect of Rivet Heads, etc., on the Water Performance of a Seaplane Float, Special Report

A 1/3.5 full-size model of the Mark V float of the Bureau of Aeronautics, Navy Department, was tested in the NACA tank both with smooth painted bottom surfaces and with roundhead rivets, plate laps, and keel plates fitted to simulate the actual bottom of a metal float. The augmentation in water resistance due to the added roughness was found to be from 10-12% at the hum speed and from 12-14% at high speeds. The effect of the roughness of the afterbody was found to be negligible except at high trims. The model data were extrapolated to full size by the usual method which assumes the forces to vary according to Froude's law, and in the case of the smooth model by a method of separation that takes into account the effect of scale on the frictional resistance. It was concluded that the effect of rivet heads on the takeoff performance of a relatively high-powered float seaplane is of little consequence but that it may be of greater importance in the case of more moderately powered flying boats.

Parkinson, J. B.↗
NASA NTRS2017

TechEdSat-N and ETC Series

This presentation address the issues and how to involve students in the process of develping, building and certifying flight hardware for ISS and development of Mars missions.

Murbach, M.↗
NASA NTRS2016

An A-Train Climatology of Extratropical Cyclone Clouds

Extratropical cyclones (ETCs) are the main purveyors of precipitation in the mid-latitudes, especially in winter, and have a significant radiative impact through the clouds they generate. However, general circulation models (GCMs) have trouble representing precipitation and clouds in ETCs, and this might partly explain why current GCMs disagree on to the evolution of these systems in a warming climate. Collectively, the A-train observations of MODIS, CloudSat, CALIPSO, AIRS and AMSR-E have given us a unique perspective on ETCs: over the past 10 years these observations have allowed us to construct a climatology of clouds and precipitation associated with these storms. This has proved very useful for model evaluation as well in studies aimed at improving understanding of moist processes in these dynamically active conditions. Using the A-train observational suite and an objective cyclone and front identification algorithm we have constructed cyclone centric datasets that consist of an observation-based characterization of clouds and precipitation in ETCs and their sensitivity to large scale environments. In this presentation, we will summarize the advances in our knowledge of the climatological properties of cloud and precipitation in ETCs acquired with this unique dataset. In particular, we will present what we have learned about southern ocean ETCs, for which the A-train observations have filled a gap in this data sparse region. In addition, CloudSat and CALIPSO have for the first time provided information on the vertical distribution of clouds in ETCs and across warm and cold fronts. We will also discuss how these observations have helped identify key areas for improvement in moist processes in recent GCMs. Recently, we have begun to explore the interaction between aerosol and cloud cover in ETCs using MODIS, CloudSat and CALIPSO. We will show how aerosols are climatologically distributed within northern hemisphere ETCs, and how this relates to cloud cover.

clouds↗