Radar as a tool in meteorology, entomology and ornithology.
Radar application to meteorology, entomology and ornithology, discussing clear air turbulence detection and flight tracking of birds and insects
Konrad, T. G.↗
SEARCH · Engineering Papers
Results for “entomology”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The NASA radar entomology program at Wallops Flight Center
NASA contribution to radar entomology is presented. Wallops Flight Center is described in terms of its radar systems. Radar tracking of birds and insects was recorded from helicopters for airspeed and vertical speed.
Vaughn, C. R.↗
Capabilities of radar as they might relate to entomological studies
A tutoral background of radar capabilities and its potential for insect research is provided. The basic principles and concepts of radar were reviewed. Information on current radar equipment was examined. Specific issues related to insect research included; target cross-section, radar frequency, tracking target recognition and false alarms, clutter reduction, radar transmitter power, and ascertained atmospheric processes.
Skolnik, M. I.↗
Human behavior determinants of exposure to Anopheles vectors of malaria in Sumba, Indonesia
Malaria vector control interventions in Sumba, Indonesia, have not been able to eliminate malaria. Human drivers of exposure to Anopheles bites were investigated as part of a larger clinical trial evaluating the impact of a spatial repellent product on malaria incidence. Human behavioral observations (HBOs) evaluating temporal and spatial presence, sleeping behaviors, and insecticide treated net (ITN) use, were collected parallel to entomological collections—indoor and outdoor human landing catches (HLCs), and house hold surveys. Data demonstrates that mosquito access to humans, enabled by structurally open houses, is evident by the similar entomological landing rates both inside and outside households. The presence of animals inside houses was associated with increased mosquito entry–however, the number of humans present inside houses was not related to increased mosquito landing. Analyzing mosquito landing rates with human behavior data enables the spatial and temporal estimation of exposure to Anopheles bites, accounting for intervention (ITN) presence and usage. Human behavior adjusted exposure to Anopheles bites was found to be highest in the early in the evening, but continued at lower levels throughout the night. Over the night, most exposure (53%) occurred when people were indoors and not under the protection of nets (asleep or awake) followed by exposure outside (44%). Characterized gaps in protection are outdoor exposure as well as exposure indoors–when awake, and when asleep and not using ITNs. Interestingly, in the primary trial, even though there was not a significant impact of the spatial repellent on vector biting rates by themselves (16%), when factoring in human behavior, there was approximately 28% less exposure in the intervention arm than in the placebo arm. The treated arm had less human behavior adjusted bites in all spaces evaluated though there was proportionally higher exposure indoors. This analysis points to the importance of using HBOs both towards understanding gaps in protection as well as how interventions are evaluated. To mitigate ongoing transmission, understanding context specific spatial and temporal exposure based on the interactions of vectors, humans and interventions would be vital for a directed evidence-based control or elimination strategy.
60 APPLIED LIFE SCIENCES↗
Nanostructure‐Derived Antireflectivity in Leafhopper Brochosomes
Understanding how insect‐derived biomaterials interact with light has led to new advances and interdisciplinary insights in entomology and physics. Leafhoppers are insects that coat themselves with highly ordered biological nanostructures known as brochosomes. Brochosomes are thought to provide a range of protective properties to leafhoppers, such as hydrophobicity and antireflectivity, which has inspired the development of synthetic brochosomes that mimic their structures. Despite recent progress, the high antireflective properties of brochosome structures are not fully understood. Herein, a combination of experiments and computational modeling is used to understand the structure‐, material‐, and polarization‐dependent optical properties of brochosomes modeled on the geometries found in three leafhopper species. The results qualitatively represent that light interference interaction with nanostructures naturally occurring in brochosomes is responsible for the spectral tuning and the asymmetric line shape of the reflectance spectra. Whereas prior work has focused on the computational modeling of idealized pitted particles, this work shows that light–matter interactions with brochosome structures can be tuned by varying the geometry of their cage‐like nanoscale features and by changing the arrangement of multiparticle assemblies. Broadly, this work establishes principles for the guided design of new optically active materials inspired by these unique insect nanostructures.
Banerjee, Progna↗
Using X-ray Micro-Computed Tomography to Three-Dimensionally Visualize the Foregut of the Glassy-Winged Sharpshooter ( Homalodisca vitripennis )
Dissecting the heads of small insects belonging to the order Hemiptera for detailed anatomical investigation with light or scanning electron microscopy is difficult, time-consuming, and destructive, often resulting in sample preparation artifacts. Nevertheless, the structural details of these insects often hold critical information regarding their interactions with bacterial pathogens. For example, the glassy-winged sharpshooter (GWSS) is an efficient vector of the bacterium Xylella fastidiosa, the causal agent of Pierce’s disease in grape vines, but the foregut of this species is exceptionally difficult to dissect. Here, we describe a simple, non-destructive method to investigate the structure of the anterior gut of GWSS using high-resolution micro-computed X-ray tomography (microCT). The use of microCT eliminates the need for destructive dissection and reveals the morphology of small insects in three dimensions, allowing the user to virtually dissect the sample. The use of microCT imaging is a promising and powerful tool in the entomological sciences for studying the structures of vector insects, especially for difficult-to-dissect regions such as the foregut.
54 ENVIRONMENTAL SCIENCES↗
KAZR Hydrometeor and Insect Masks
The Ka-band ARM zenith pointing radar (aka, KAZR) is so sensitive that it detects cloud particles and individual insects. While detecting insects with Ka-band radar is beneficial and desirable to advance radar entomology, this sensitivity can be detrimental to radar meteorology because insects could be interpreted as clouds or precipitation. For example, misclassifying insects as clouds has been a problem for the ARM Active Remote Sensing of Clouds (ARSCL) Value Added Product since its inception (Clothiaux et al. 2000). Based on cloud particle and insect radar scattering properties, an algorithm was developed that identifies clouds, raindrops, ice particles, and insects in KAZR co- and cross-polarimeteric Doppler velocity spectra. The algorithm produces affirmative masks in the KAZR native time and height resolution indicating time-height locations of hydrometeors and insects. The hydrometeor mask contains binary information (e.g., yes/no hydrometeor presence), and the insect mask includes a proxy for insect activity that increases when more insects are detected in the Doppler velocity spectra. The algorithm was developed using KAZR medium sensitivity mode (MD) observations and was applied to two summer seasons of KAZR observations at the Southern Great Plains (SGP) Central Facility: May-October 2018 and 2019. In the future, this data set will be expanded to include other KAZR operating modes and observations from other ARM field sites. Details of the algorithm and data set can be found in: Williams, C.R., K.L. Johnson, S.E. Giangrande, J. C. Hardin, R. Oktem, and D. M. Romps, 2021: Identifying Insects, Clouds, and Precipitation using Vertically Pointing Polarimetric Radar Doppler Velocity Spectra. Atmospheric Measurement Techniques, submitted 6-Feb-2021. https://amt.copernicus.org/preprints/amt-2021-27/#discussion.For more information on the ARSCL VAP, see Clothiaux, E. E., T. P. Ackerman, G. G. Mace, K. P. Moran, R. T. Marchand, M. A. Miller, and B. E. Martner, 2000; J. Appl. Meteor., 39, 645-665.
54 ENVIRONMENTAL SCIENCES↗
Radar program at Western Cotton Research Laboratory
An entomological radar similar to those used in England is developed. The radar will detect insects in flight and the data will be used for studying insect dispersal.
Wolf, W.↗
Malaria Modeling using Remote Sensing and GIS Technologies
Malaria has been with the human race since the ancient time. In spite of the advances of biomedical research and the completion of genomic mapping of Plasmodium falciparum, the exact mechanisms of how the various strains of parasites evade the human immune system and how they have adapted and become resistant to multiple drugs remain elusive. Perhaps because of these reasons, effective vaccines against malaria are still not available. Worldwide, approximately one to three millions deaths are attributed to malaria annually. With the increased availability of remotely sensed data, researchers in medical entomology, epidemiology and ecology have started to associate environmental and ecological variables with malaria transmission. In several studies, it has been shown that transmission correlates well with certain environmental and ecological parameters, and that remote sensing can be used to measure these determinants. In a NASA project, we have taken a holistic approach to examine how remote sensing and GIs can contribute to vector and malaria controls. To gain a better understanding of the interactions among the possible promoting factors, we have been developing a habitat model, a transmission model, and a risk prediction model, all using remote sensing data as input. Our objectives are: 1) To identify the potential breeding sites of major vector species and the locations for larvicide and insecticide applications in order to reduce costs, lessen the chance of developing pesticide resistance, and minimize the damage to the environment; 2) To develop a malaria transmission model characterizing the interactions among hosts, vectors, parasites, landcover and environment in order to identify the key factors that sustain or intensify malaria transmission, and 3) To develop a risk model to predict the occurrence of malaria and its transmission intensity using epidemiological data and satellite-derived or ground-measured environmental and meteorological data.
Kiang, Richard↗
An Automated Flying-Insect-Detection System
An automated flying-insect-detection system (AFIDS) was developed as a proof-of-concept instrument for real-time detection and identification of flying insects. This type of system has use in public health and homeland security decision support, agriculture and military pest management, and/or entomological research. Insects are first lured into the AFIDS integrated sphere by insect attractants. Once inside the sphere, the insect's wing beats cause alterations in light intensity that is detected by a photoelectric sensor. Following detection, the insects are encouraged (with the use of a small fan) to move out of the sphere and into a designated insect trap where they are held for taxonomic identification or serological testing. The acquired electronic wing beat signatures are preprocessed (Fourier transformed) in real-time to display a periodic signal. These signals are sent to the end user where they are graphically displayed. All AFIDS data are pre-processed in the field with the use of a laptop computer equipped with LABVIEW. The AFIDS software can be programmed to run continuously or at specific time intervals when insects are prevalent. A special DC-restored transimpedance amplifier reduces the contributions of low-frequency background light signals, and affords approximately two orders of magnitude greater AC gain than conventional amplifiers. This greatly increases the signal-to-noise ratio and enables the detection of small changes in light intensity. The AFIDS light source consists of high-intensity Al GaInP light-emitting diodes (LEDs). The AFIDS circuitry minimizes brightness fluctuations in the LEDs and when integrated with an integrating sphere, creates a diffuse uniform light field. The insect wing beats isotropically scatter the diffuse light in the sphere and create wing beat signatures that are detected by the sensor. This configuration minimizes variations in signal associated with insect flight orientation.
Vann, Timi↗
The First Prediction of a Rift Valley Fever Outbreak
El Nino/Southern Oscillation (ENSO) related anomalies were analyzed using a combination of satellite measurements of elevated sea surface temperatures, and subsequent elevated rainfall and satellite derived normalized difference vegetation index data. A Rift Valley fever risk mapping model using these climate data predicted areas where outbreaks of Rift Valley fever in humans and animals were expected and occurred in the Horn of Africa from December 2006 to May 2007. The predictions were subsequently confirmed by entomological and epidemiological field investigations of virus activity in the areas identified as at risk. Accurate spatial and temporal predictions of disease activity, as it occurred first in southern Somalia and then through much of Kenya before affecting northern Tanzania, provided a 2 to 6 week period of warning for the Horn of Africa that facilitated disease outbreak response and mitigation activities. This is the first prospective prediction of a Rift Valley fever outbreak.
Anyamba, Assaf↗
An Automated Flying-Insect Detection System
An automated flying-insect detection system (AFIDS) was developed as a proof-of-concept instrument for real-time detection and identification of flying insects. This type of system has use in public health and homeland-security decision support, agriculture and military pest management, and/or entomological research. Insects are first lured into the AFIDS integrated sphere by insect attractants. Once inside the sphere, the insect s wing beats cause alterations in light intensity that is detected by a photoelectric sensor. Following detection, the insects are encouraged (with the use of a small fan) to move out of the sphere and into a designated insect trap where they are held for taxonomic identification or serological testing. The acquired electronic wing-beat signatures are preprocessed (Fourier transformed) in real time to display a periodic signal. These signals are sent to the end user where they are graphically. All AFIDS data are preprocessed in the field with the use of a laptop computer equipped with LabVIEW. The AFIDS software can be programmed to run continuously or at specific time intervals when insects are prevalent. A special DC-restored transimpedance amplifier reduces the contributions of low-frequency background light signals, and affords approximately two orders of magnitude greater AC gain than conventional amplifiers. This greatly increases the signal-to-noise ratio and enables the detection of small changes in light intensity. The AFIDS light source consists of high-intensity Al-GaInP light-emitting diodes (LEDs). The AFIDS circuitry minimizes brightness fluctuations in the LEDs and when integrated with an integrating sphere, creates a diffuse uniform light field. The insect wing beats isotropically scatter the diffuse light in the sphere and create wing-beat signatures that are detected by the sensor. This configuration minimizes variations in signal associated with insect flight orientation. Preliminary data indicate that AFIDS has sufficient sensitivity and frequency measuring capability to differentiate between male and female mosquitoes (Figure 1, bottom panel) and fruit flies (data not shown). Similar studies show that AFIDS can be utilized to detect discrete differences between two mosquito species, Aedes aegypti and Aedes albopictus. When fully deployable, a wireless network of AFIDS monitors could be used in combination with other remotely sensed data and visually displayed in a geographic information system (GIS) to provide real-time surveillance (see Figure 2). More accurate and sensitive insect population forecasts and effective rapid response and mitigation of insect issues would then be possible.
Vann, Timi↗
DoD-GEIS Rift Valley Fever Monitoring and Prediction System as a Tool for Defense and US Diplomacy
Over the last 10 years the Armed Forces Health Surveillance Center's Global Emerging Infections Surveillance and Response System (GEIS) partnering with NASA'S Goddard Space Flight Center and USDA's USDA-Center for Medical, Agricultural & Veterinary Entomology established and have operated the Rift Valley fever Monitoring and Prediction System to monitor, predict and assess the risk of Rift Valley fever outbreaks and other vector-borne diseases over Africa and the Middle East. This system is built on legacy DoD basic research conducted by Walter Reed Army Institute of Research overseas laboratory (US Army Medical Research Unit-Kenya) and the operational satellite environmental monitoring by NASA GSFC. Over the last 10 years of operation the system has predicted outbreaks of Rift Valley fever in the Horn of Africa, Sudan, South Africa and Mauritania. The ability to predict an outbreak several months before it occurs provides early warning to protect deployed forces, enhance public health in concerned countries and is a valuable tool use.d by the State Department in US Diplomacy. At the international level the system has been used by the Food and Agricultural Organization (FAD) and the World Health Organization (WHO) to support their monitoring, surveillance and response programs in the livestock sector and human health. This project is a successful testament of leveraging resources of different federal agencies to achieve objectives of force health protection, health and diplomacy.
Anyamba, Assaf↗
A haplotype‐resolved reference genome of Quercus alba sheds light on the evolutionary history of oaks
Summary White oak ( Quercus alba ) is an abundant forest tree species across eastern North America that is ecologically, culturally, and economically important. We report the first haplotype‐resolved chromosome‐scale genome assembly of Q. alba and conduct comparative analyses of genome structure and gene content against other published Fagaceae genomes. We investigate the genetic diversity of this widespread species and the phylogenetic relationships among oaks using whole genome data. Despite strongly conserved chromosome synteny and genome size across Quercus , certain gene families have undergone rapid changes in size, including defense genes. Unbiased annotation of resistance (R) genes across oaks revealed that the overall number of R genes is similar across species – as are the chromosomal locations of R gene clusters – but, gene number within clusters is more labile. We found that Q. alba has high genetic diversity, much of which predates its divergence from other oaks and likely impacts divergence time estimations. Our phylogenetic results highlight widespread phylogenetic discordance across the genus. The white oak genome represents a major new resource for studying genome diversity and evolution in Quercus . Additionally, we show that unbiased gene annotation is key to accurately assessing R gene evolution in Quercus .
Larson, Drew A. [Department of Biology Indiana Uni↗
Multi-level movement response of invasive wild pigs ( Sus scroƒa ) to removal
Not provided.
Agriculture↗
Evaluation of a warfarin bait for controlling invasive wild pigs ( Sus scrofa )
Not provided.
Agriculture↗
Evaluation of macadamia felted coccid (Hemiptera: Eriococcidae) damage and cultivar susceptibility using imagery from a small unmanned aerial vehicle ( sUAV ), combined with ground truthing
Abstract BACKGROUND Macadamia felted coccid, Acanthococcus ioronsidei (Williams) (Hemiptera: Eriococcidae), is a significant pest of macadamia nut, Macadamia integrifolia Maiden & Betche (Protaceae), in Hawaii, and heavy infestations can kill branches, resulting in characteristic dead, copper‐colored leaves. Small Unmanned Aerial Vehicles (sUAV) or ‘drones,’ combined with spatial data analysis, can provide growers with accurate and high‐resolution detection of plant stress due to pest infestations. We investigated the feasibility of using RGB (red‐green‐blue) color images from sUAV to detect dieback caused by macadamia felted coccid infestation and compared sUAV estimates with ground‐based damage estimates (ground truthing). RESULTS Spatial analysis showed clustering of foliar damage that reflected cultivar susceptibility to macadamia felted coccid infestation, with cultivars 344 and 856 being susceptible, and cultivars 800 and 333 being tolerant. sUAV and ground‐based estimates of foliar damage were similar for the cultivar 344, but ground‐based assessments were higher than sUAV for cultivar 856, possibly due to the differences in canopy architecture and significant early dieback in the lower canopy. At foliar damage levels <10%, sUAV and ground truthing data were significantly positively correlated, suggesting sUAV may be useful in detecting early stages of macadamia felted coccid infestation. CONCLUSIONS Cultivars showed varying susceptibility to macadamia felted coccid infestation and the foliage damage appeared in clusters. sUAV was able to detect the foliage damage under high and low infestation scenarios suggesting that it can be effectively used for the early detection of infestations. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.
60 APPLIED LIFE SCIENCES↗
Coconut oil derived five‐component synthetic oviposition deterrent for oriental fruit fly, Bactrocera dorsalis
Abstract BACKGROUND Bactrocera dorsalis, oriental fruit fly (OFF), is one of the most destructive agricultural pests. Although bait sprays can effectively control OFF,resistance development has been a concern. We evaluated the oviposition deterrent activity of coconut free fatty acids (CFFA), a mixture of eight coconut oil‐derived fatty acids known to repel hematophagous insects and deter their feeding and oviposition, against OFF females. RESULTS In laboratory 72‐h two‐choice assays using guava‐juice infused‐agar as an oviposition substrate, CFFA deterred OFF oviposition in a dose‐dependent manner with the greatest reduction of 87% at 20 mg dose compared to the control. When the eight CFFA components were tested individually, four compounds (caprylic, capric, oleic, and linoleic acids) significantly reduced OFF oviposition (‘negative‐compounds’), two (lauric and myristic acids) had no effect (‘neutral‐compounds’), and two (palmitic and stearic acids) stimulated OFF oviposition (‘positive‐compounds’). In two‐choice tests, the ‘negative‐compounds’ blend failed to elicit the same level of oviposition reduction as CFFA at equivalent concentrations found in CFFA. Adding the two ‘neutral‐compounds’ recovered the oviposition deterrence similar to CFFA. Subsequent subtraction tests showed that four ‘negative‐compounds’ plus lauric acid was as effective as CFFA in reducing OFF oviposition in guava‐juice agar. This five‐component key‐deterrent blend also reduced OFF oviposition by 95 and 72% on papaya and tomato fruit, respectively. CONCLUSION CFFA acts as an oviposition deterrent for OFF. Given that CFFA compounds are generally regarded as safe for humans and the environment, CFFA and its bioactive components have potential use in behavioral control strategies against OFF. © 2023 Society of Chemical Industry. This article has been contributed to by U.S. Government employees and their work is in the public domain in the USA.
Agriculture↗