Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “energy input”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Effect of variable energy input on nitrogen fixation in instantaneous linear discharges

The reported analysis implies that the number of molecules of NO produced per joule of discharge varies with input energy. The calculations assume a cylindrical symmetry but the results are consistent with equivalent calculations using spherical symmetry. If NO yield does vary with input energy, extrapolation of laboratory experiments using small sparks is not as straightforward as has previously been assumed. Calculated curves for the yield of NO as a function of discharge energy are presented and are compared with experimental values and other theoretical values.

Chameides, W. L.↗
NASA NTRS1984

On the rate of energy input in thermal solar flares

The rise phases of solar soft X-ray flares observed by X-ray crystal spectrometers on P78-1 are discussed in terms of the rate of change of X-ray flux as a function of time. It is shown that the flux increases exponentially over most of the rise time. The e-folding time (tau) has a cutoff at approximately 13 s. Soft X-ray flares with smaller values of tau are not observed. It is suggested that this phenomenon is due to the ability of the solar atmosphere to absorb the input energy and convert it into a typical soft X-ray flare, when the value of tau is greater than about 13 s. For energy input rates with tau greater than about 13 s, the temperature attained by the plasma is typically around 2 x 10 to the 7th K, but for values of tau less than 13 s, the gas is heated to much higher temperatures (about 10 to the 8th K), producing a certain class of hard X-ray flares.

Feldman, U.↗
DOE OSTI2026

Analysis of Power Electronic Solutions for Wide-Range Wave Energy Input

Wave energy is a largely untapped energy source with the potential to provide 290 TWh per year to the continental United States. As a new technology, wave energy converters are less efficient and reliable compared to established energy sources, leaving the vast energy of the sea largely unutilized. Wave energy is uniquely inconsistent, with large fluctuations. Paired with harsh operating environments and difficulty in repair, the power electronics designed to harvest wave energy need to be reliable, cost-effective, and able to work in a wide operating band. The literature on existing power electronics in wave energy converters and lessons learned across other industries provide a framework of topologies to simulate. WEC-Sim, an open-source hydrodynamic platform in MATLAB Simulink developed by the National Laboratory of the Rockies, was used to simulate a wide range of power electronics under a variety of wave conditions. This paper provides a comprehensive investigation into existing wave energy power electronics converters, state-of-the-art topologies that can be applied to wave energy, and novel solutions to wave conversion.

16 TIDAL AND WAVE POWER↗
NASA NTRS2022

Connecting Energy Input With Ionospheric Upflow and Outflow

The connection between energy inputs and the generation of ion upflows and outflows is a topic of keen scientific interest and the subject of a number of empirical studies. Despite this interest, it remains uncertain how different ion species respond to energy input, what defines the upper and lower bounds of the ion flux, and what role solar illumination plays in regulating the relationship between energy input and ion upflows/outflows. This work simulates how ion flux scales with low and high altitude energization, and to a combination of both. Furthermore, we examine the influence of solar illumination on these relationships by considering how the scaling of ion flux with energy input changes over the solar cycle, comparing solar minimum and maximum, as well as how they change from day to night conditions. We find O -+ flux tends to respond more strongly to energy inputs than H -+ flux, with the O -+ flux often exhibiting a lower activation energy and a greater dynamic range. The lower bound of the ion flux at 4,000 km is typically defined by the polar wind H -+ , although O -+ upflows can dominate at low altitudes in the presence of significant frictional heating of the ion gas or soft electron precipitation. However, when significant soft electron precipitation and wave-particle interactions are present simultaneously the lower bound of the ion flux at 4,000 km is defined by the O -+ . Finally, we find a difference between the steady state response of the outflow to energy input and the peak response.

A. Glocer↗
NASA NTRSDate not supplied

Decoding the energy inputs that drive the upper atmosphere with NASA’s Geospace Dynamics Constellation (GDC)

NASA’s Geospace Dynamics Constellation (GDC) mission will study the effect of space weather phenomena on Earth’s upper atmosphere ion and neutral gases and, in turn, their impact on human assets. GDC will provide multi-point observations to determine how the Earth’s upper atmosphere is driven to dynamic changes and extremes by the solar wind. Magnetospheric energy input, both kinetic and electromagnetic, will be captured by the Comprehensive Auroral Precipitation Experiment (CAPE), the Thermal Plasma Sensor (TPS), and the Near Earth Magnetometer Instrument in a Small Integrated System (NEMISIS). CAPE captures the complete kinetic energy inputs with observations of the precipitating and upgoing electrons and precipitating ions. TPS captures part of the electromagnetic energy inputs with observations of the thermal plasma velocity that map E-field inputs, and NEMISIS captures the other part of the electromagnetic energy input with measurements of magnetic field variations due to field aligned currents. We use similar observations from the Defense Meteorological Space Platform (DMSP) satellites to demonstrate the balance between the different energy inputs (electron and ion Joule heating and Poynting flux) during the different phases of storms. We explore the local time and spatial structure and the impact they have on atmospheric density and winds with simulations of the Global Ionosphere and Thermosphere Model (GITM) and demonstrate how GDC will enable us to reconstruct those energy inputs locally and regionally

Eftyhia Zesta↗
NASA NTRS2005

Transition Region Emission and the Energy Input to Thermal Plasma in Solar Flares

Understanding the energetics of solar flares depends on obtaining reliable determinations of the energy input to flare plasma. X-ray observations of the thermal bremsstrahlung from hot flare plasma provide temperatures and emission measures which, along with estimates of the plasma volume, allow the energy content of this hot plasma to be computed. However, if thermal energy losses are significant or if significant energy goes directly into cooler plasma, this is only a lower limit on the total energy injected into thermal plasma during the flare. We use SOHO UVCS observations of O VI flare emission scattered by coronal O VI ions to deduce the flare emission at transition region temperatures between 100,000 K and 1 MK for the 2002 July 23 and other flares. We find that the radiated energy at these temperatures significantly increases the deduced energy input to the thermal plasma, but by an amount that is less than the uncertainty in the computed energies. Comparisons of computed thermal and nonthermal electron energies deduced from RHESSI, GOES, and UVCS are shown.

Holman, Gordon D.↗
NASA NTRS1984

Latitudinal Dependence of the Energy Input into the Mesosphere by High Energy Electrons

Night-time ionspheric absorption measurements give the possibility to study the precipitation of high energy electrons into the mesosphere during and after magnetospheric storms. The uniform Finnish riometer network was used together with measurements from Kuhlungsborn and Collm (GDR) to investigate the night-time absorption as a function of latitude (L=6.5 to 2.5) and storm-time for seven storms. The common trends visible in all these events are summarized in a schematic average picture, showing the distribution of increased ionospheric absorption as a function of latitude (L value) and storm-time.

Wagner, C. U.↗
NASA NTRS1988

Monte Carlo modeling of the net effects of coma scattering and thermal reradiation on the energy input to cometary nucleus

A Monte Carlo simulation method is presented that can, to an accuracy of a few percent, calculate the effects of a dusty coma on the total energy input to the cometary nucleus. This method treats nonconservative nonisotropic scattering, as well as the reflection from the nucleus surface. Results are presented as a function of the optical thickness of the dust column in the sun-comet axis. The total energy input to the nucleus appears to be only weakly dependent on the opacity of the coma, the radial distribution of the dust, or the details of the extinction processes.

Salo, H.↗
NASA NTRS2016

Modeling the Ionosphere-Thermosphere Response to a Geomagnetic Storm Using Physics-based Magnetospheric Energy Input: OpenGGCM-CTIM Results

The magnetosphere is a major source of energy for the Earth's ionosphere and thermosphere (IT) system. Current IT models drive the upper atmosphere using empirically calculated magnetospheric energy input. Thus, they do not sufficiently capture the storm-time dynamics, particularly at high latitudes. To improve the prediction capability of IT models, a physics-based magnetospheric input is necessary. Here, we use the Open Global General Circulation Model (OpenGGCM) coupled with the Coupled Thermosphere Ionosphere Model (CTIM). OpenGGCM calculates a three-dimensional global magnetosphere and a two-dimensional high-latitude ionosphere by solving resistive magnetohydrodynamic (MHD) equations with solar wind input. CTIM calculates a global thermosphere and a high-latitude ionosphere in three dimensions using realistic magnetospheric inputs from the OpenGGCM. We investigate whether the coupled model improves the storm-time IT responses by simulating a geomagnetic storm that is preceded by a strong solar wind pressure front on August 24, 2005. We compare the OpenGGCM-CTIM results with low-earth-orbit satellite observations and with the model results of Coupled Thermosphere-Ionosphere-Plasmasphere electrodynamics (CTIPe). CTIPe is an up-to-date version of CTIM that incorporates more IT dynamics such as a low-latitude ionosphere and a plasmasphere, but uses empirical magnetospheric input. OpenGGCMCTIM reproduces localized neutral density peaks at approx. 400 km altitude in the high-latitude dayside regions in agreement with in situ observations during the pressure shock and the early phase of the storm. Although CTIPe is in some sense a much superior model than CTIM, it misses these localized enhancements. Unlike the CTIPe empirical input models, OpenGGCM-CTIM more faithfully produces localized increases of both auroral precipitation and ionospheric electric fields near the high-latitude dayside region after the pressure shock and after the storm onset, which in turn effectively heats the thermosphere and causes the neutral density increase at 400 km altitude.

Connor, Hyunju K.↗
NASA NTRS1979

Numerical modeling of quasi-static coronal loops. I - Uniform energy input

A quasi-static numerical model for coronal loops is considered for the case of a uniform energy input per unit volume into the loops. A line dipole model is used to represent the loop magnetic field, and the variations in loop cross section observed in X-ray photographs are parameterized by the ratio between the cross-sectional areas at the loop apex and base. The results of numerical modeling indicate that for an area ratio greater than unity, increases in the area ratio of a loop with a given length and apex area cause a general rise in electron density and a fall in the temperature gradient, leading to large increases in the differential emission factor at high temperatures. The differential function obtained is significantly different from that predicted by analytical models; however, analytical predictions for the temperature-electron density relations are comparable to numerical results. It is also concluded that even a symmetrical loop may have a maximum temperature away from the apex.

Vesecky, J. F.↗
NASA NTRS1982

Modulation of dayside on and neutral distributions at Venus Evidence of direct and indirect solar energy inputs

The details of solar variability and its coupled effects on the Venusian dayside are examined for evidence of short-term perturbations and associated energy inputs. Ion and neutral measurements obtained from the Orbiter Ion Mass Spectrometer and Orbital Neutral mass Spectrometer are used to show that the dayside concentrations of CO2(+) and the neutral gas temperature are smoothly modulated with a 28-day cycle reasonably matching that of the solar F(10.7) and EUV fluxes. Earlier measurements show less pronounced and more irregular modulations and more conspicuous short-term day-to-day fluctuations in the ions and neutrals, as well as relatively large enhancements in the solar wind, which appear consistent with differences in solar coronal behavior during the two periods. It is suggested that the solar wind variations cause fluctuations in joule heating, producing the observed short-term ion and neutral variations.

Taylor, H. A., Jr.↗
NASA NTRS2012

GEM-CEDAR Study of Ionospheric Energy Input and Joule Dissipation

We are studying ionospheric model performance for six events selected for the GEM-CEDAR modeling challenge. DMSP measurements of electric and magnetic fields are converted into Poynting Flux values that estimate the energy input into the ionosphere. Models generate rates of ionospheric Joule dissipation that are compared to the energy influx. Models include the ionosphere models CTIPe and Weimer and the ionospheric electrodynamic outputs of global magnetosphere models SWMF, LFM, and OpenGGCM. This study evaluates the model performance in terms of overall balance between energy influx and dissipation and tests the assumption that Joule dissipation occurs locally where electromagnetic energy flux enters the ionosphere. We present results in terms of skill scores now commonly used in metrics and validation studies and we can measure the agreement in terms of temporal and spatial distribution of dissipation (i.e, location of auroral activity) along passes of the DMSP satellite with the passes' proximity to the magnetic pole and solar wind activity level.

Rastaetter, Lutz↗
DOE OSTI2022

The Unexpected Oceanic Peak in Energy Input to the Atmosphere and Its Consequences for Monsoon Rainfall

Abstract Monsoons have historically been understood to be caused by the low thermal inertia of land, allowing more energy from summer insolation to be transferred to the overlying atmosphere than over adjacent ocean. Here, we show that during boreal summer, the global maximum net energy input (NEI) to the atmosphere unexpectedly lies over the Indian Ocean, not over land. Observed radiative fluxes suggest that cloud‐radiative effects (CRE) almost double the NEI over ocean, shifting the NEI peak from land to ocean. Global climate model experiments with both land and interactive sea surface temperatures confirm that CRE create the oceanic NEI maximum. Interactions between CRE, NEI, circulation, and land‐sea contrast in surface heat capacity shift precipitation from Southeast to South Asia. CRE thus alter the global partitioning of precipitation between land and ocean and the spatial structure of Earth's strongest monsoon, in ways that can be understood through the NEI.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1993

Atmospheric energy input and ionization by energetic electrons during the geomagnetic storm of 8-9 November 1991

The Atmospheric X-ray Imaging Spectrometer (AXIS) of the Particle Environment Monitor investigation aboard the Upper Atmosphere Research Satellite monitors energy input to the upper atmosphere due to energetic electrons. Analysis of the AXIS data from the major geomagnetic storm of 8-9 November 1991 is presented. During the November storm, electrons above a few keV flowing into a substantially expanded auroral zone provided the bulk of the ionizing power to the upper atmosphere. At the peak of the disturbance the total AXIS-observed power reached 40 GW. On 9 November the whole day average atmospheric ionization rate in the auroral zone at 80 km altitude exceeded the rate due to solar UV and solar X-rays by a factor of over 10 to 100.

Chenette, D. L.↗
NASA NTRS1991

Energy balance in the solar transition region. II - Effects of pressure and energy input on hydrostatic models

The radiation of energy by hydrogen lines and continua in hydrostatic energy-balance models of the transition region between the solar chromosphere and corona is studied using models which assume that mechanical or magnetic energy is dissipated in the hot corona and is then transported toward the chromosphere down the steep temperature gradient of the transition region. These models explain the average quiet sun and also the entire range of variability of the Ly-alpha lines. The relations between the downward energy flux, the pressure of the transition region, and the different hydrogen emission are described.

Fontenla, J. M.↗
NASA NTRS1985

The initial mass function and global rates of mass, momentum, and energy input to the interstellar medium via stellar winds

Published observational data are compiled and analyzed, using theoretical stellar-evolution models to determine the global rates of mass, momentum, and energy injected into the interstellar medium (ISM) by stellar winds. Expressions derived include psi = 0.00054 x (M to the -1.03) stars formed/sq kpc yr log M (where M is the initial mass function in solar mass units) and mass-loss = (2 x 10 to the -13th) x (L to the 1.25) solar mass/yr (with L in solar luminosity units). It is found that the wind/supernova injection of energy into the ISM and the mass loss from stars of 5 solar mass or more are approximately balanced by the dissipation of energy by cloud-cloud collisions and the formation of stars, respectively.

Van Buren, D.↗
DOE OSTI2021

Incorporating bubble growth volume feedback to improve simulation of the response of a structure containing liquid and gas to sudden energy input

The SNS target module is a stainless-steel structure that contains and directs mercury. The mercury is struck with short, intense proton pulses to create neutrons. The pulses deposit energy and cause loads on the target structure and mercury cavitation. Helium bubbles are introduced into the mercury to reduce loads and cavitation. This gas complicates the prediction of the target module’s physical response. The current method used to simulate the structural response to the proton pulse incorporates a simple but effective approach to approximate mercury cavitation effects. This method cannot account for the changes from injected non-condensable gas. The ability to model the target vessel response is a prerequisite for estimating its life. Known approaches for simulating a bubbly fluid mixture’s response are computationally expensive and impractical for detailed engineering models. A constitutive model is proposed for target mercury with injected gas bubbles, with the intent of providing more accurate mercury–vessel response behavior without the computing costs required to track individual bubbles. The model’s assumptions and a computational model embodiment are described. The bubbly mercury computational model is subjected to test problems to assess its potential utility. Here, the model was able to better predict the effect of gas on wave propagation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗