Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Deep glassy state dynamic data challenge glass models: Elastic models

The idea of an “ideal” glass transition temperature has persisted at least since the work from Kauzmann when it was observed that the entropy of glass-forming liquids extrapolated to below that of the crystal, thus suggesting the need for a phase transition at a finite or non-zero absolute temperature. This thermodynamic paradox was also found to be related to the observations of a diverging of the extrapolated viscosity or relaxation times at a temperature near to this ideal glass transition. Recently, however, we have carried out experiments using both an ancient amber material and an ultra-stable amorphous fluoropolymer that challenge the ideas of the divergence of the viscosity or relaxation times at this ideal glass transition. In the present manuscript we have evaluated two theories of the glass transition that are based on ideas related to elasticity of the amorphous glass-forming material. We find that the models from both J. Dyre and his group and of K.S. Schweizer and his group not only show non-diverging behavior but are also in some agreement with the new data, though still showing somewhat slower dynamics than those observed in the experiments. The work shows that the data are good enough to distinguish between theories and it is suggested that other mechanisms may be needed to fully describe the non-diverging responses of the ultra-stable glasses.

36 MATERIALS SCIENCE↗

Hypo-Elastic Model for Lung Parenchyma

A simple elastic isotropic constitutive model for the spongy tissue in lung is derived from the theory of hypoelasticity. The model is shown to exhibit a pressure dependent behavior that has been interpreted by some as indicating extensional anisotropy. In contrast, we show that this behavior arises natural from an analysis of isotropic hypoelastic invariants, and is a likely result of non-linearity, not anisotropy. The response of the model is determined analytically for several boundary value problems used for material characterization. These responses give insight into both the material behavior as well as admissible bounds on parameters. The model is characterized against published experimental data for dog lung. Future work includes non-elastic model behavior.

59 BASIC BIOLOGICAL SCIENCES↗

Correlation between relaxations and plastic deformation, and elastic model of flow in metallic glasses and glass-forming liquids

We study the similarity and correlations between relaxations and plastic deformation in metallic glasses (MGs) and MG-forming liquids. It is shown that the microscope plastic events, the initiation and formation of shear bands, and the mechanical yield in MGs where the atomic sites are topologically unstable induced by applied stress, can be treated as the glass to supercooled liquid state transition induced by external shear stress. On the other hand, the glass transition, the primary and secondary relaxations, plastic deformation and yield can be attributed to the free volume increase induced flow, and the flow can be modeled as the activated hopping between the inherent states in the potential energy landscape. We then propose an extended elastic model to describe the flow based on the energy landscape theory. That is, the flow activation energy density is linear proportional to the instantaneous elastic moduli, and the activation energy density {rho}{sub E} is determined to be a simple expression of {rho}{sub E}=(10/11)G+(1/11)K. The model indicates that both shear and bulk moduli are critical parameters accounting for both the homogeneous and inhomogeneous flows in MGs and MG-forming liquids. The elastic model is experimentally certified. We show that the elastic perspectives offers a simple scenario for the flow in MGs and MG-forming liquids and are suggestive for understanding the glass transition, plastic deformation, and nature and characteristics of MGs.

36 MATERIALS SCIENCE↗

Viscoelastic Model for Lung Parenchyma for Multi-Scale Modeling of Respiratory System Phase I: Hypo-Elastic Model for CFD Implementation

An isotropic constitutive model for the parenchyma of lung has been derived from the theory of hypo-elasticity. The intent is to use it to represent the mechanical response of this soft tissue in sophisticated, computational, fluid-dynamic models of the lung. This demands that the continuum model be accurate, yet simple and effcient. An objective algorithm for its numeric integration is provided. The response of the model is determined for several boundary-value problems whose experiments are used for material characterization. The effective elastic, bulk, and shear moduli, and Poisson’s ratio, as tangent functions, are also derived. The model is characterized against published experimental data for lung. A bridge between this continuum model and a dodecahedral model of alveolar geometry is investigated, with preliminary findings being reported.

59 BASIC BIOLOGICAL SCIENCES↗

Elastic model of dry friction

Friction of elastic bodies is connected with the passing through the metastable states that arise at the contact of surfaces rubbing against each other. Three models are considered that give rise to the metastable states. Friction forces and their dependence on the pressure are calculated. In Appendix A, the contact problem of elasticity theory is solved with adhesion taken into account.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mesoscale Linear Elastic Modeling and Homogenization of Marine Energy Composites

The design of fiber-reinforced composite (FRC)-based components for marine energy applications necessitates a fundamental understanding of material properties and the resulting geometry to predict long-term performance. In this work, we present a modeling workflow to predict linear elastic and diffusive bulk properties at the mesoscale for an idealized geometry based on knowledge of fiber and resin properties. A parametric study was performed to identify the key model input parameters that influence bulk properties. Furthermore, we demonstrate how bulk properties can be leveraged in high-fidelity image-based simulations, where imperfections in tow geometry and voids captured during X-ray computed tomography imaging are explicitly represented within the simulation. Bulk properties of interest include moduli, Poisson’s ratios, hygroscopic swelling, diffusivity, and moisture uptake, which are key parameters for characterizing FRC performance within marine environments. Modeling predictions agreed well with experimental data, except for estimating swelling coefficients, likely due to crack accumulation as a function of moisture uptake. The mesoscale modeling workflow ultimately highlights a versatile framework for understanding the influence of material and geometric properties, which can be leveraged to rapidly assess new FRC-based components.

computational mechanics↗

On the consistency between nearest-neighbor peridynamic discretizations and discretized classical elasticity models

The peridynamic theory of solid mechanics is a nonlocal reformulation of the classical continuum mechanics theory. At the continuum level, it has been demonstrated that classical (local) elasticity is a special case of peridynamics. Such a connection between these theories has not been extensively explored at the discrete level. This paper investigates the consistency between nearest-neighbor discretizations of linear elastic peridynamic models and finite difference discretizations of the Navier–Cauchy equation of classical elasticity. While nearest-neighbor discretizations in peridynamics have been numerically observed to present grid-dependent crack paths or spurious microcracks, this paper focuses on a different, analytical aspect of such discretizations. We demonstrate that, even in the absence of cracks, such discretizations may be problematic unless a proper selection of weights is used. Specifically, we demonstrate that using the standard meshfree approach in peridynamics, nearest-neighbor discretizations do not reduce, in general, to discretizations of corresponding classical models. We study nodal-based quadratures for the discretization of peridynamic models, and we derive quadrature weights that result in consistency between nearest-neighbor discretizations of peridynamic models and discretized classical models. The quadrature weights that lead to such consistency are, however, model-/discretization-dependent. We motivate the choice of those quadrature weights through a quadratic approximation of displacement fields. The stability of nearest-neighbor peridynamic schemes is demonstrated through a Fourier mode analysis. Finally, an approach based on a normalization of peridynamic constitutive constants at the discrete level is explored. This approach results in the desired consistency for one-dimensional models, but does not work in higher dimensions. The results of the work presented in this paper suggest that even though nearest-neighbor discretizations should be avoided in peridynamic simulations involving cracks, such discretizations are viable, for example for verification or validation purposes, in problems characterized by smooth deformations. Furthermore, we demonstrate that better quadrature rules in peridynamics can be obtained based on the functional form of solutions.

42 ENGINEERING↗

Unconditionally stable, second-order schemes for gradient-regularized, non-convex, finite-strain elasticity modeling martensitic phase transformations

In the setting of continuum elasticity martensitic phase transformations are characterized by a non-convex free energy density function that possesses multiple wells in strain space and includes higher-order gradient terms for regularization. Metastable martensitic microstructures, defined as solutions that are local minimizers of the total free energy, are of interest and are obtained as steady state solutions to the resulting transient formulation of Toupin’s gradient elasticity at finite strain. This type of problem poses several numerical challenges including stiffness, the need for fine discretization to resolve microstructures, and following solution branches. Accurate time-integration schemes are essential to obtain meaningful solutions at reasonable computational cost. Here in this work we introduce two classes of unconditionally stable second-order time-integration schemes for gradient elasticity, each having relative advantages over the other. Numerical examples are shown highlighting these features.

42 ENGINEERING↗

Swept Blade Aero-Elastic Model for a Small Wind Turbine (Presentation)

A preprocessor for analyzing preswept wind turbines using the in-house aero-elastic tool coupled with a multibody dynamic simulator was developed. A baseline 10-kW small wind turbine with straight blades and various configurations that featured bend-torsion coupling via blade-tip sweep were investigated to study their impact on ultimate loads and fatigue damage equivalent loads.

17 WIND ENERGY↗

Properties of the low-spin high-spin interface during the relaxation of spin-crossover materials, investigated through an electro-elastic model

The present work is devoted to the spatio-temporal investigations of spin-crossover lattices during their thermal relaxation from high- to low-spin state. The analysis is performed using Monte Carlo simulations on a distortable 2D lattice the sites of which are occupied by high-spin (HS) or low-spin (LS) atoms. The lattice is circular in shape and the HS to LS transformation results in single domain nucleation followed by growth and propagation processes. The evolution of the LS:HS interface is monitored during the relaxation process, through the mapping of spin states, displacement fields, local stresses, and elastic energy. The results show a curved interface, the curvature of which is reversed at the mid-transformation. The local stresses and elastic energy peak at the vicinity of the HS:LS interface, with sizeable dependence upon the position along the front line which evidences the edge effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A generalized 3D elastic model for nanoscale, self-assembled oxide-metal thin films with pillar-in-matrix configurations

In recent years, functional oxide-metal based vertically aligned nanocomposite (VAN) thin films have gained interest due to their intriguing physical properties and multifunctionalities stemming from the complex interactions between the two phases in the film and the substrate. In this work, we develop a model for studying the energetics of these thin film systems, including the effects of both lattice mismatch and capillary forces due to interface curvature. Each phase is incorporated into the model using a phase indicator function, and we introduce the capillary forces as body forces using a vector density representation of the interface. The model is implemented using the finite element method to study the deformation of the thin film which is composed of Au nanopillars embedded in a La 0.7 Sr 0.3 MnO 3 (LSMO) matrix on an SrTiO 3 (STO) substrate. Further, the results suggest that the total energy is lowest for random configurations of pillars compared to ordered square and hexagonal lattice configurations, consistent with the random distribution of pillars found in experiments. Furthermore, we find that the interfacial energy dominates the total energy of each configuration, suggesting that interfacial energy in the system is an important design parameter for nanocomposite growth, along with the lattice mismatch.

36 MATERIALS SCIENCE↗

Grain2Mesh: Mesh Generation for Grain-Scale Nonlinear Elasticity Modeling

The nonlinear hysteretic behavior of rocks under cyclic loading is a crucial area of study in geomechanics. The macroscopic response of a variety of materials has been found to be contingent upon the behavior of the micro-scale structure. This project aims to develop a functional and maintainable software package for generating a multi-phase numerical mesh and accompanying simulation files for finite element modeling used in computational mechanics solvers. Meshes generated from images often lack key preprocessing that reduces noise and prevents mesh element distortion that can increase computational cost. By incorporating user feedback throughout, grain2mesh ensures a high-fidelity mesh that can be used to model grain-scale interactions such as shearing, crack propagation, and interfacial material contrast. Scientific applications of this software include material fracturing, stress-strain analysis for natural and engineered materials, and nonlinear meso-scale analysis.

54 ENVIRONMENTAL SCIENCES↗