Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Electrical edge effect induced photocurrent overestimation in low-light organic photovoltaics

In many literatures, the short-circuit current (J SC ) of indoor organic photovoltaics is overestimated, leading to severely wrong device performance evaluation and analysis. In this work, based on the equivalent circuit model, we demonstrate that electrical edge effect is sensitive to both transverse surface resistance and light intensity. At low light intensity, the electrical edge effect could lead to J SC being significantly overestimated, i.e., by 100% and even more. We show that for a PM6:Y6 device capped with a MoOX layer, when measured under 0.01 sun, the usually overlooked interface doping mechanism would lead to J SC and PCE overestimation by 51% and 15%, respectively. Besides, we show that the magnitude of J SC overestimation drastically increases with high photoactive-layer surface roughness. This work emphasized the significant electrical edge effect on J SC evaluations for low-light solar cells and is conducive to understanding the intrinsic mechanism of edge effect, promoting a healthier development of organic photovoltaics.

14 SOLAR ENERGY↗

Habitat specialization and edge effects of soil microbial communities in a fragmented landscape

Abstract Soil microorganisms play outsized roles in nutrient cycling, plant health, and climate regulation. Despite their importance, we have a limited understanding of how soil microbes are affected by habitat fragmentation, including their responses to conditions at fragment edges, or “edge effects.” To understand the responses of soil communities to edge effects, we analyzed the distributions of soil bacteria, archaea, and fungi in an experimentally fragmented system of open patches embedded within a forest matrix. In addition, we identified taxa that consistently differed among patch, edge, or matrix habitats (“specialists”) and taxa that showed no habitat preference (“nonspecialists”). We hypothesized that microbial community turnover would be most pronounced at the edge between habitats. We also hypothesized that specialist fungi would be more likely to be mycorrhizal than nonspecialist fungi because mycorrhizae should be affected more by different plant hosts among habitats, whereas specialist prokaryotes would have smaller genomes (indicating reduced metabolic versatility) and be less likely to be able to sporulate than nonspecialist prokaryotes. Across all replicate sites, the matrix and patch soils harbored distinct microbial communities. However, sites where the contrasts in vegetation and pH between the patch and matrix were most pronounced exhibited larger differences between patch and matrix communities and tended to have edge communities that differed from those in the patch and forest. There were similar numbers of patch and matrix specialists, but very few edge specialist taxa. Acidobacteria and ectomycorrhizae were more likely to be forest specialists, while Chloroflexi, Ascomycota, and Glomeromycota (i.e., arbuscular mycorrhizae) were more likely to be patch specialists. Contrary to our hypotheses, nonspecialist bacteria were not more likely than specialist bacteria to have larger genomes or to be spore‐formers. We found partial support for our mycorrhizal hypothesis: arbuscular mycorrhizae, but not ectomycorrhizae, were more likely to be specialists. Overall, our results indicate that soil microbial communities are sensitive to edges, but not all taxa are equally affected, with arbuscular mycorrhizae in particular showing a strong response to habitat edges. In the context of increasing habitat fragmentation worldwide, our results can help inform efforts to maintain the structure and functioning of the soil microbiome.

Winfrey, Claire C. [Department of Ecology and Evol↗

Habitat fragmentation alters the distance of abiotic seed dispersal through edge effects and direction of dispersal

Habitat loss and fragmentation are leading causes of species declines, driven in part by reduced dispersal. Isolating the effects of fragmentation on dispersal, however, is daunting because the consequences of fragmentation are typically intertwined, such as reduced connectivity and increased prevalence of edge effects. We used a large-scale landscape experiment to separate consequences of fragmentation on seed dispersal, considering both distance and direction of local dispersal. We evaluated seed dispersal for five wind- or gravity-dispersed, herbaceous plant species that were planted at different distances from habitat edges, within fragments that varied in their connectivity and shape (edge-to-area ratio). Dispersal distance was affected by proximity and direction relative to the nearest edge. For four of five species, dispersal distances were greater further from habitat edges and when seeds dispersed in the direction of the nearest edge. Connectivity and patch edge-to-area ratio had minimal effects on local dispersal. Here our findings illustrate how some, but not all, landscape changes associated with fragmentation can affect the key population process of seed dispersal.

54 ENVIRONMENTAL SCIENCES↗

Additive manufacturing enabled hot-wire apparatus with suppressed edge effect error

This invention describes a method of structuring a metal or metal coated wire in a manner such that it provides enhanced accuracy when used in a hot-wire apparatus for transient thermal conductivity measurements for low-density materials. This is accomplished by using a diameter varying structure with two ends of the wire of sufficiently small diameter that the edge-effect induced error can be reduced by generating a more uniform temperature profile along the wire, whereas in conventional apparatus the temperatures always drop at the ends of a finite wire due to its ends that are being cooled by the wire-supports.

36 MATERIALS SCIENCE↗

Urbanization and edge effects interact to drive mutualism breakdown and the rise of unstable pathogenic communities in forest soil

Temperate forests are threatened by urbanization and fragmentation, with over 20% (118,300 km 2 ) of U.S. forest land projected to be subsumed by urban land development. We leveraged a unique, well-characterized urban-to-rural and forest edge-to-interior gradient to identify the combined impact of these two land use changes—urbanization and forest edge creation—on the soil microbial community in native remnant forests. We found evidence of mutualism breakdown between trees and their fungal root mutualists [ectomycorrhizal (ECM) fungi] with urbanization, where ECM fungi colonized fewer tree roots and had less connectivity in soil microbiome networks in urban forests compared to rural forests. However, urbanization did not reduce the relative abundance of ECM fungi in forest soils; instead, forest edges alone led to strong reductions in ECM fungal abundance. At forest edges, ECM fungi were replaced by plant and animal pathogens, as well as copiotrophic, xenobiotic-degrading, and nitrogen-cycling bacteria, including nitrifiers and denitrifiers. Urbanization and forest edges interacted to generate new “suites” of microbes, with urban interior forests harboring highly homogenized microbiomes, while edge forest microbiomes were more heterogeneous and less stable, showing increased vulnerability to low soil moisture. When scaled to the regional level, we found that forest soils are projected to harbor high abundances of fungal pathogens and denitrifying bacteria, even in rural areas, due to the widespread existence of forest edges. Our results highlight the potential for soil microbiome dysfunction—including increased greenhouse gas production—in temperate forest regions that are subsumed by urban expansion, both now and in the future.

54 ENVIRONMENTAL SCIENCES↗

Discovering and Demonstrating a Novel High-Performing 2D-Patterned Electrode for Proton-Exchange Membrane Water Electrolysis Devices

Proton-exchange membrane water electrolysis (PEMWE) produces hydrogen with high efficiency and purity but uses high-loading platinum-group metal (PGM) catalysts. Such concerns call for the development of novel electrode architectures to improve catalyst utilization and mass activity, thus promoting PEMWE cost competitiveness for large-scale implementation. In this study, we demonstrated, for the first time, a novel two-dimensional (2D)-patterned electrode with edge effects to address these challenges. The edge effect was induced by membrane properties, potential distribution, and counter electrode coverage and could be optimized by tuning the catalyst layer dimensions. To achieve identical PEMWE performance, the optimal pattern saved the 21% anode PGM catalyst compared with the conventional catalyst fully covered electrode. The PGM catalyst could be further reduced by 61% to boost mass activity with no significant performance loss. The results also indicated that the electrode uniformity in PEMWE cells might not be as critical as that in PEM fuel cells. Finally, the novel 2D-patterned electrode could effectively reduce PGM catalyst loading, accelerating affordable and large-scale production of hydrogen and other value-added chemicals via electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measuring and Modeling Bifacial Technologies

Measuring and modeling bifacial technologies is of interest for new system design, capacity testing, and performance evaluation. The bifacial PV field at NREL has been gathering data for different bifacial technologies and sensors for the last 2.5 years, making it possible to compare bifacial performance with monofacial counterparts, as well as experimental demonstrations of best locations to place sensors to match modeled and perceived irradiance non-uniformity on the rear of the bifacial modules. This presentation summarizes performance, degradation, sensor position for module edge effects and the impact of row edge effects, and the roadmap for NREL bifacial modeling tools.

bifacial PV↗

Ants disperse seeds farther in habitat patches with corridors

Habitat fragmentation impacts ecosystems worldwide through habitat loss, reduced connectivity, and edge effects. Yet, these landscape factors are often confounded, leaving much to be investigated about their relative effects, especially on species interactions. In a landscape experiment, we investigated the consequences of connectivity and edge effects for seed dispersal by ants. We found that ants dispersed seeds farther in habitat patches connected by corridors, but only in patch centers. We did not see an effect on the total number of seeds moved or the rate ants detected seeds. Furthermore, we did not see any differences in ant community composition across patch types, suggesting that shifts in ant behavior or other factors increased ant seed dispersal in patches connected by corridors. Long-distance seed dispersal by ants that requires an accumulation of short-distance dispersal events over generations may be an underappreciated mechanism through which corridors increase plant diversity.

60 APPLIED LIFE SCIENCES↗

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS 2 : The Effect of Edge Termination

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS 2 , it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Here two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS 2 monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.

2D transition metal dichalcogenides↗

Simulated effect of edge plasma density parameters on lower hybrid wave scattering in EAST

The incorporation of lower hybrid (LH) wave spectrum broadening in the poloidal wavenumber (⁠k θ ) space at the last close field surface (LCFS) is reported to lead to better agreement of the modeled LH wave current profile with the experimental results [Baek et al., Nucl. Fusion 61, 106034 (2021)]. To further understand its underlying mechanism and find the possible influence factors, effects of wave scattering caused by drift-wave type density fluctuation on the probability distribution of the LH wave polar refractive index (⁠N θ ) at the LCFS are studied under density parameters in the scrape-off-layer. According to a scattering model [P. T. Bonoli and E. Ott, Phys Fluids 25(2), 359–375 (1982)], scattering probability and scattering angle distribution are two main factors that determine the degree of spectral broadening. Studies presented here show that the total scattering probability increases first and then decreases as the wave propagates toward a smaller normalized radius of poloidal magnetic flux (⁠ρ⁠). The degree of spectral broadening is found to depend on the density and density fluctuation together by changing the intensity and a proportion of the geometrical optics approximation term and the E×B drift term in the scattering model. Additionally, the fluctuation correlation length can significantly modify the probability distribution of N θ at the LCFS, which is found to significantly change the LH wave current profile.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Prototype Hanford Barrier Performance Monitoring Report: Fiscal Year 2024

This report provides an annual update on performance monitoring of the Prototype Hanford Barrier (PHB) at the Hanford Site. The PHB is part of a long-term study that serves as the scientific basis for many of the evapotranspiration-capillary barrier designs currently used globally and for future engineered barrier designs planned for remedial actions over waste and demolition sites at the Hanford Site. The PHB allows us to identify potential future issues and develop better monitoring techniques before these engineered barriers are constructed. Surface barriers like the PHB are essential for preventing water infiltration and curbing the spread of contaminants to groundwater. Effective monitoring of soil moisture levels above and below these barriers is crucial given that performance metrics could span up to 1,000 years. From July 2023 to June 2024, the water flux (as measured by tipping buckets) through the 2-m-thick silt loam layer of the PHB – a fine silty material that stores water under high capillary tension – remained well below the 0.5-mm-per-year performance threshold, demonstrating its effectiveness in preventing water penetration. In 2024, degraded tipping bucket gauges were replaced to ensure the accuracy of future data. Additionally, neutron probes revealed that the wetting front from the rainy season only penetrated to a maximum depth of 1.2 m into the silt loam. This further demonstrated the barrier's efficiency, as the wetting front did not fully penetrate the 2-m-thick capillary barrier. The western gravel slope of the PHB, composed of Hanford Site pit gravel of varying sizes, demonstrated low flux rates. In contrast, the eastern riprap slope exhibited higher flux rates. Zhang (2017) found that the riprap side slope of the PHB had the highest drainage rates in January and the lowest in late summer or early fall, indicating significant summer evaporation. Drainage rates increased significantly under enhanced precipitation conditions, far exceeding the design criterion, which could lead to water infiltration into the waste zone. The study introduced the “edge effect,” where elevated drainage rates from the riprap may migrate laterally beneath the barrier, compromising its ability to isolate waste, and recommended expanding the barrier and conducting further research to mitigate this issue. This report provides a review on surface barrier edge effects and their potential impact to subsurface contaminant migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Monolayer TiS 2 Nanosheets on Au(111)–Structural Characterization and Effect of Edge Stability for Shape Control

Transition metal dichalcogenides are promising alternatives to noble metal catalysts, e.g., for (photo-)activation of greenhouse gases or hydrogenations. Herein, a direct synthetic route for 2D TiS 2 nanosheets on Au(111) by titanium deposition in the presence of a mild, organic, non-oxidizing sulfur source is presented. High-resolution scanning tunneling microscopy (STM) is used to gain atomic-level insights into the TiS 2 nanosheet morphology. In contrast to the literature, this protocol gains mostly hexagonal and truncated triangular nanosheets with an increased edge contrast in STM, analog to metallic edge states in MoS 2 . Synchrotron-based photoelectron spectroscopy allows insights into compositional details, specifically to distinguish different S sites on the TiS 2 sheets and other S species on the sample. Further, a minimum size is identified (9 S atoms side length), which underlines the importance of moiré reconstructions for stress relief. The TiS 2 sheets coexist with [Au]Ti 1 S 3 clusters, in which a single gold atom is alloyed into the surface and capped by three S atoms. Together with the finding of a critical sheet size, this points toward on-surface Ostwald ripening as a relevant process in the sheet formation. Ab-initio calculations (density functional theory) underscore that the chemical potential of S is an essential descriptor to maintain shape control.

2D nanomaterials↗

Destabilizing effects of edge infernal components on resistive wall modes in advanced tokamak scenarios

The stability of the n = 1 resistive wall modes (RWMs) dominated by the pressure-driven infernal components is investigated using the ideal magnetohydrodynamics (MHD) code AEGIS for the advanced tokamak scenarios. Here, n is the toroidal mode number. In the advanced tokamak scenarios, due to the large fraction of bootstrap current contribution, the profile of safety factor q is deeply reversed in magnetic shear in the central core region and locally flattened within the edge pedestal. Consequently, the pressure-driven infernal components develop in the corresponding flat-q regions of both core and edge. However, the edge infernal components dominate the n = 1 RWM structure and lead to lower β N limits for the advanced tokamak scenarios. In the framework of ideal MHD, the edge rotation is found the most critical to the stabilization due to the dominant influence of the edge infernal components, which should be maintained sufficiently large in magnitude and range in order for the rotation alone to fully suppress the n = 1 RWM in typical advanced tokamak scenarios.

36 MATERIALS SCIENCE↗

Shifts in belowground processes along a temperate forest edge

Abstract Context Forests are increasingly fragmented, and as a result most forests in the United States are within one km of an edge. Edges change environmental conditions of the forest—especially radiation, roughness, temperature, and moisture—that can have consequences for plant productivity and ecosystem functions. However, edge effects on aboveground characteristics of plants and the environment are better understood relative to plant roots and soil in the belowground environment. Objectives Our main objectives were to determine if soil C pools and fluxes are higher at the edge relative to other landscape positions, and to understand how specific belowground processes contribute to bulk differences in pools and fluxes. Methods We measured environmental conditions, live and dead fine root traits, soil chemistry, and soil respiration along a 75 m transect from interior forest to meadow in Gaithersburg, MD. Results We observed differences in the soil chemical, biological and hydrological environment between the forest interior, edge and adjacent meadow. In some cases, the forest edge represented a mid-point in environmental or belowground characteristics between the forest interior and meadow ( e.g. , pH, C-to-N ratio [C:N], live fine root biomass, heterotrophic respiration), likely reflecting the change in litter type and quality associated with the transition from grass to woody species. In other cases, neighboring landscape positions were different from the forest edge, which was drier and had higher dead fine root biomass. Although soil C contents were not significantly different across landscape positions, there was a tendency towards higher average soil C content at the edge relative to other landscape positions, suggesting that increased C loss related to root decay and greater soil respiration at the edge relative to the forest interior may have been offset by increased C gain from high plant productivity and subsequent inputs to soil. Conclusions This research provides insight into how forest edge environments may differ from the interior and how concurrent processes above- and belowground may contribute to those differences.

54 ENVIRONMENTAL SCIENCES↗

3D simulations of spinlike flames in Co/Al multilayers with enhanced conduction losses

Reactive Co/Al multilayers are uniformly structured materials that may be ignited to produce rapid and localized heating. Prior studies varying the bilayer thickness (i.e., sum of two individual layers of Co and Al) have revealed different types of flame morphologies, including: (a) steady/planar, (b) wavy/periodic, and (c) transverse bands, originating in the flame front. These instabilities resemble the “spin waves” first observed in the early studies of solid combustion (i.e., Ti cylinder in a N 2 atmosphere), and are likewise thought to be due to the balance of heat released by reaction and heat conduction forward into the unreacted multilayer. However, the multilayer geometry and three-dimensional (3D) edge effects are relatively unexplored. In this work, a new diffusion-limited reaction model for Co/Al multilayers was implemented in large, novel 3D finite element analysis (FEA) simulations, in order to study the origins of these spinlike flames. This reaction model builds upon previous work by introducing three new phase-dependent property models for: (1) the diffusion coefficient, (2) anisotropic thermal conductivity tensor, and (3) bulk heat capacity, as well as one additional model for the bilayer-dependent heat of reaction. These novel 3D simulations are the first to predict both steady and unsteady flames in Co/Al multilayers. Moreover, two unsteady modes of flame propagation are identified, which depend on the enhanced conduction losses with slower flames, as well as flame propagation around notched edges. Finally, future work will consider the generality of the current modeling approach and also seek to define a more generalized set of stability criteria for additional multilayer systems.

42 ENGINEERING↗

Moisture Absorbing and Water Self‐Releasing from Hybrid Hydrogel Desiccants

Abstract Atmospheric moisture is a valuable resource for fresh water and potentially sustainable energy. However, direct harvesting water from moisture (the vapor form) remains the most challenging. Hybrid desiccants made from hydrogels embedded with salt offer promise in absorbing moisture. However, the desorption process often requires additional energy to heat the samples. Here, poly(acrylic acid) (PAA) hydrogels embedded with lithium chloride are prepared, demonstratng simultaneous moisture absorption and self‐release of liquid water at room temperature with 50–90% relative humidity. The water self‐releasing process can be separated into two distinct stages: 1) surface release, where water droplets grow on the hydrogel surface due to differences in nucleation and diffusion rates, and 2) bulk release, triggered by the collapse of polymer chains, subsequently releasing water from the hydrogel network. Factors such as salt concentration, hydrogel crosslinking density, and film thickness are investigated to better understand the moisture absorption and water‐releasing processes. Moreover, hydrophobic domains are introduced onto the salt‐embedded PAA films, creating an edge effect that enhances the droplet growth rates. When the hydrophobic domains are patterned, the movement of released water can be guided, resulting in a threefold increase in water removal rate attributed to gravitational force.

Chemistry↗

Identifying microbial drivers in biological phenotypes with a Bayesian network regression model

Abstract In Bayesian Network Regression models, networks are considered the predictors of continuous responses. These models have been successfully used in brain research to identify regions in the brain that are associated with specific human traits, yet their potential to elucidate microbial drivers in biological phenotypes for microbiome research remains unknown. In particular, microbial networks are challenging due to their high dimension and high sparsity compared to brain networks. Furthermore, unlike in brain connectome research, in microbiome research, it is usually expected that the presence of microbes has an effect on the response (main effects), not just the interactions. Here, we develop the first thorough investigation of whether Bayesian Network Regression models are suitable for microbial datasets on a variety of synthetic and real data under diverse biological scenarios. We test whether the Bayesian Network Regression model that accounts only for interaction effects (edges in the network) is able to identify key drivers (microbes) in phenotypic variability. We show that this model is indeed able to identify influential nodes and edges in the microbial networks that drive changes in the phenotype for most biological settings, but we also identify scenarios where this method performs poorly which allows us to provide practical advice for domain scientists aiming to apply these tools to their datasets. BNR models provide a framework for microbiome researchers to identify connections between microbes and measured phenotypes. We allow the use of this statistical model by providing an easy‐to‐use implementation which is publicly available Julia package at https://github.com/solislemuslab/BayesianNetworkRegression.jl .

59 BASIC BIOLOGICAL SCIENCES↗

Actinide Elemental Ratios of Spent Nuclear Fuel Samples by Resonance Ionization Mass Spectrometry

While resonance ionization mass spectrometry (RIMS) has demonstrated utility in measuring isotopic compositions of elements in complex matrices without the need for chemical separation to remove isobaric interferences, it has had limited application in measuring elemental compositions. The ability to determine elemental compositions via an in situ method like RIMS would be an exceptional asset in spent nuclear fuel analysis, where they are important in assessing reactor histories and whose chemical separation presents a radiological hazard. However, quantitative elemental analysis by RIMS requires special considerations because each element is ionized by its own set of lasers tuned to element specific resonant ionization wavelengths. We present the first comprehensive study of measuring elemental ratios by RIMS in spent nuclear fuel. All actinides produced by neutron capture are enhanced significantly radially from the center to the edge of a fuel pellet. This edge effect is not readily accessible by conventional bulk measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗