Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dual function material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Identifying mechanistic differences between co-fed CO 2 hydrogenation and reactive CO 2 capture using Ru and Pd dual function materials

Dual function materials (DFMs) enable reactive carbon capture (RCkeC), an intensified approach to carbon dioxide capture and utilization for cost and energy input reductions. Yet, there is a fundamental lack of understanding of mechanisms around CO 2 adsorption and subsequent conversion on these materials, hindering further development. Herein, we investigated several supported alkaline metal oxides for their CO 2 adsorption characteristics to find that Na/Al 2 O 3 had the highest CO 2 adsorption capacity, accompanied by a variety of CO 2 adsorption geometries as identified by in situ DRIFTS and computational modeling. The addition of catalytic metals (Ru, Pd) increased the adsorption capacity of Na/Al 2 O 3 without altering binding modes. In the subsequent reactive desorption step, acetate and formate intermediates were observed. Notably, this mechanistic investigation identified that the formation of acetate species was unique to RCC on a DFM, as these species were not observed in co-fed hydrogenation over the DFM or RCC over a Na-free catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Noble-Metal-Free, Nickel-Based Dual Functional Materials for Improved Methane Production from In Situ Carbon Dioxide Capture and Conversion

Promoters for dual functional materials have not been well explored, but promoters could improve the efficiency of the process by improving the selectivity of the CO 2 methanation process. Utilizing integrated capture and conversion, where CO 2 is captured and converted to useful products, would allow for a useful avenue to control CO 2 emissions. One such way to accomplish this would be to utilize materials that can both capture and convert CO 2 to useful products. However, these materials are often based on costly noble metals, like ruthenium and platinum, decreasing their viability on an industrial scale. Less expensive metals, for example, nickel, would allow for dual functional materials to be more readily utilized in industrial settings. Nickel-based dual functional materials often do not react with the captured CO 2 and merely desorb the CO 2 rather than form a useful product. However, promoters have not been well explored for these types of materials to improve the catalytic properties, which would be beneficial to improve nickel-based materials. Herein, we report the addition of ytterbium on a nickel-based dual functional material and the improvements to the production of methane from captured CO 2 with the incorporated ytterbium promoter. The ytterbium promoter improves the selectivity of the catalysts for the hydrogenation of captured CO 2 to methane and increases the ability for the material to capture CO 2 due to additional basic sites being formed on the surface of alumina. As a result, the 12%Ni/4%Yb/6%Na 2 O/Al 2 O 3 catalyst was utilized to capture carbon dioxide and then convert the captured CO 2 to methane over five cycles, where both the amount captured and the amount converted remained stable, indicating the stability of the material over long-term use.

Catalysts↗
DOE OSTI2025

A Pressure-Swing Process for Reactive CO2 Capture and Conversion to Methanol through Precise Control of Co-Located Active Sites in Dual Functional Materials

The goals of this project are to design and develop tailored dual-functional materials (DFMs) and the accompanying pressure-swing process for the reactive capture and conversion (RCC) of CO 2 to methanol, a vital product in the chemical market and a versatile precursor to fuels. Throughout this project, NREL researcher team has successfully developed 2 groups of DFM and associated cyclic RCC procedure to selectivity produce either methanol or CO, which is a major intermediate for methanol synthesis with commercially available technologies.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Long-Range Metal–Sorbent Interactions Determine CO 2 Capture and Conversion in Dual-Function Materials

Carbon capture and utilization involve multiple energy- and cost-intensive steps. Dual-function materials (DFMs) can reduce these demands by coupling CO 2 adsorption and conversion into a single material with two functionalities: a sorbent phase and a metal for catalytic CO 2 conversion. The role of metal catalysts in the conversion process seems salient from previous work, but the underlying mechanisms remain elusive and deserve deeper investigation to achieve maximum utilization of the two phases. Here, for this work, preformed colloidal Ru nanoparticles were deposited onto a “NaOx”/Al 2 O 3 sorbent to prepare prototypical DFMs with controlled phases for CO 2 capture and hydrogenation to CH 4 . Ru addition was found to double the high-temperature CO 2 adsorption capacity by activating the “NaOx”/Al 2 O 3 sorbent phase during a reductive pretreatment step. Most importantly, low Ru loadings were sufficient to ensure maximum CO 2 adsorption and conversion. This was attributed to the key role of the metal–sorbent interactions, wherein Ru was required to hydrogenate strongly bound CO 2 on the “NaO x ”/Al 2 O 3 sorbent to CH 4 via the H 2 activated on Ru. This interaction facilitated rate-determining carbonate migration and subsequent hydrogenation at the metal–sorbent interface. Overall, Ru controlled the CO 2 hydrogenation reaction rate, while the “NaO x ”/Al 2 O 3 sorbent dictated the CO 2 uptake capacity. By controlling metal–sorbent interactions at the molecular level, we demonstrate the critical role of the two phases and their synergy, facilitating the design of DFMs with maximum CO 2 capture and conversion efficiency.

carbon capture↗
DOE OSTI2023

Aging studies of Dual functional materials for CO 2 direct air capture with in situ methanation under simulated ambient conditions: Ru thrifting for cost reduction

Dual function materials (DFMs) comprised of 0.25 %Ru, 6.1 %Na 2 O/γ-Al 2 O 3 //monolith were evaluated for about 250 hours time-on-stream (TOS) at various simulated ambient climate capture conditions followed by temperature swing methanation to 280 °C. Herein this paper focuses on the impact of thrifting Ru to low levels and the impact on performance. Results showed both stable CO 2 capture capacity and CH 4 production with 0.25 % Ru DFM deposited on a ceramic monolith. The CO 2 conversion to CH 4 production was decreased slightly by the Ru decrease from 1 % to 0.25 %. The capture capacity decreased since a lower Ru content reduces the complete decomposition of the Na 2 CO 3 precursor producing fewer active adsorption sites (“Na 2 O”). The deployment of a low Ru DFM monolith would significantly decrease the overall capital cost and give more potential for a large-scale direct air capture and methanation (DACM) application.

03 NATURAL GAS↗
DOE OSTI2021

Dual function materials (Ru+Na 2 O/Al 2 O 3 ) for direct air capture of CO 2 and in situ catalytic methanation: The impact of realistic ambient conditions

Here a dual function material (DFM) comprised of 1% Ru, 10% Na 2 O/γ–Al 2 O 3 was studied for combined direct air capture (DAC) of CO 2 and catalytic methanation in a temperature swing operation. In the newly proposed operation, the DFM captures CO 2 (400 ppm) from air at ambient conditions. The material is then heated in H 2 to a temperature sufficient for catalytic conversion of the captured CO 2 to renewable natural gas. In this study, we demonstrate high CO 2 adsorption capacity and rates at ambient conditions (25 °C); the adsorbed CO 2 is then successfully catalytically methanated upon heating in H 2 . Adsorption was also carried out in humid conditions, more closely simulating ambient air. Adsorption and methane production were greatly improved with stable initial performance. The rate of adsorption is shown to be flowrate-dependent, which is critical for future reactor design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Improving Conversion of Captured CO 2 on Mixed-Oxide Dual-Function Materials by Low-Concentration Metal Promotion

Reactive carbon capture (RCC) is a promising nascent approach to harness the untapped resource of waste CO 2 to produce fuels and platform chemicals. However, process economics relies on the design of dual-function materials (DFMs) that exhibit maximal conversion of captured CO 2 and high selectivity toward valuable carbon products (e.g., CO). Herein, we report the use of low-concentration (ca. 0.5 wt %) metal promotors (Pt and Au) to improve the conversion of captured CO 2 on a Zn-Al mixed-oxide DFM by >30%, while also more than doubling per-cycle CO yield due to enhanced retention of captured CO 2 and H 2 activation. In situ DRIFTS of bound CO 2 on the DFMs showed distinctions in surface carbonate formation for the Pt- and Au-modified materials that were correlated with product evolution during the reactive desorption step of RCC. Particularly, Pt afforded superior H 2 activation but formed irreversibly-bound bicarbonates, compromising overall productivity, while the Na/Au/ZA DFM predominantly adsorbed CO 2 on Na sites, resulting in polydentate carbonates that are retained until higher temperatures before conversion to CO. In conclusion, these results indicate that adding a low concentration of oxidation-resistant noble metals, especially Au, is an effective strategy for improving key performance metrics of Zn-Al mixed-oxide DFMs to further advance the development of scalable RCC technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Metallic Phase-Free Zn-Al Mixed Oxide Dual Function Materials Enable High Co Selectivity in Reactive Carbon Capture From Dilute Streams

Scaling conventional carbon capture and utilization methods can be limited by cost and permitting issues associated with transportation of captured CO2. Reactive carbon capture (RCC), in which a single solid-phase dual function material (DFM) is used to both capture CO2 from dilute streams (e.g., flue gas) and catalytically convert the bound species to products in a single unit operation, has the potential to reduce energy and capital costs by over 50% relative to separate capture and conversion. To incentivize adoption, high-value products such as methanol and CO should be targeted. Appealingly, CO can be produced at atmospheric pressure, thereby lowering overall H2 demand; however, high reaction temperatures (> 600 degrees C) and the use of oxidizable transition metals, such as Ni, are often necessary to drive the reverse water-gas shift (RWGS) during reactive desorption of the bound CO2. The sensitivity of these transition metals to oxygen undercuts their utility in point source RCC. To further derisk RCC, it is essential to develop metallic-phase free DFMs that are insensitive to residual oxygen in flue gas and can achieve selective reactive desorption to CO at moderate pressures (< 400 degrees C). To this end, we have developed K-modified Zn-Al mixed oxides (K/ZnAlOx) to convert captured CO2 to CO with > 97% selectivity and yields up to 53% of captured CO2 at 400 degrees C. Complementary in situ spectroscopy studies revealed the role of K-modification in improving RCC performance of unmodified ZnAlOx. The top performing DFM was also subjected to extended RCC cycling with oxygen co-fed with CO2 during the capture test to assess durability under simulated flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High Selectivity Reactive Carbon Dioxide Capture over Zeolite Dual-Functional Materials

Reactive carbon dioxide capture (RCC) is a process where carbon dioxide (CO 2 ) is captured from a mixed gas stream (such as air) and converted to products without first performing a separation step to concentrate the CO 2 . Here, in this work, zeolite dual-functional materials (ZFMs) are introduced and evaluated for simulated RCC. The studied ZFMs feature high surface area, crystalline, microporous zeolite faujasite (FAU) as the support. Sodium oxide (“Na 2 O”) is impregnated as an effective capture agent capable of scavenging low concentration CO 2 (1,000 ppm). Exchanged and impregnated sodium on FAU chemisorbs CO 2 as carbonates and bicarbonates but does not promote the conversion of sorbed CO 2 to products when heated in hydrogen. The addition of Ru promotes the formation of formates, while the addition of Pt generates carbonyl surface species when heated in hydrogen. The active metal then promotes extremely high selectivity for CO 2 hydrogenation to either methane on Ru catalyst (~150 °C) or carbon monoxide on Pt catalyst (~200 °C) when heated in reducing atmospheres.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Efficient Synthetic Natural Gas Production from Direct Air Capture Using Titania-Based Dual Function Materials

Converting atmospheric CO2 into methane offers a compelling pathway to store intermittent renewable electricity and enhance energy security using existing natural gas infrastructure. However, current CO2 utilization approaches remain energy- and capital-intensive, largely due to the need for separate capture, purification, and conversion steps. Integrating CO2 capture with catalytic methanation represents a transformative strategy for process intensification on both the unit operation and molecular levels. We report a series of Ru-Na/TiO2 dual function materials (DFMs) for a reactive carbon capture (RCC) process consisting of simulated direct air capture and subsequent CO2 methanation (DACM). Superior methane desorption purity was observed on TiO2-based DFMs (>94 %) relative to state-of-the-art Al2O3-supported DFMs (77 %). Modifying the process to begin CO2 adsorption immediately following the methanation stage, rather than beginning adsorption near ambient temperature, resulted in >97 % methane desorption purity, suitable for injection into the natural gas pipeline without additional CO2 separation steps.

organic↗
DOE OSTI2023

Scalable Metal Phosphides as a Dual-Function Catalyst and Lithium–Metal Stabilizer for Lithium–Sulfur Batteries

Although lithium-sulfur batteries are a promising approach for achieving high energy density, their commercial viability is limited by poor sulfur redox kinetics, polysulfide shuttling, and lithium metal instability. To resolve these issues concurrently, we utilize titanium phosphides (TiP x ) as dual-function materials to catalyze the sulfur redox kinetics at the cathode and stabilize the lithium metal at the anode. Importantly, these phosphides are synthesized via a facile, highly scalable one-step mechanochemical ball-milling process that does not generate toxic phosphine gas as a byproduct, making it more viable compared to traditional synthesis routes. At the cathode, we find that higher phosphorus contents in the phosphide as in TiP 2 leads to superior redox kinetics and reduced polysulfide shuttling due to improved polysulfide adsorption ability. Meanwhile, at the anode, TiP 2 acts as a lithiophilic seed in a 3-dimensional carbonaceous host that can be lithiated to form a Li-TiP 2 /C composite. This composite alleviates the volume changes of lithium metal while utilizing TiP 2 to form a more favorable solid-electrolyte interface (SEI). Full coin cells employing TiP 2 in the cathode and anode were assembled with a sulfur loading of 4 mg cm -2 and a negative to positive capacity (N/P) ratio of 6. After 50 cycles, the TiP 2 full cells retain a higher capacity of 643 mA h g -1 compared to 422 mA h g -1 for the conventional cell, despite the higher N/P ratio of 12 for the conventional cell. Altogether, we showcase the viability of employing metal phosphides as catalysts in practical lithium-sulfur batteries.

25 ENERGY STORAGE↗