Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dissolution trapping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Hydrogen interactions in aluminum-lithium alloys

A program is described which seeks to develop an understanding of the effects of dissolved and trapped hydrogen on the mechanical properties of selected Al-Li-Cu-X alloys. A proposal is made to distinguish hydrogen (H2) induced EAC from aqueous dissolution controlled EAC, to correlate H2 induced EAC with mobile and trapped concentrations, and to identify significant trap sites and hydride phases (if any) through use of model alloys and phases. A literature review shows three experimental factors which have impeded progress in the area of H2 EAC for this class of alloys. These are as listed: (1) inter-subgranular fracture in Al-Li alloys when tested in the S-T orientation in air or vacuum make it difficult to readily detect H2 induced fracture based on straight forward changes in fractography; (2) the inherently low H2 diffusivity and solubility in Al alloys is further compounded by a native oxide which acts as a H2 permeation barrier; and (3) H2 effects are masked by dissolution assisted processes when mechanical testing is performed in aqueous solutions.

Smith, S. W.↗

Evaluation of Factors Affecting Powdered Drug Reconstitution in Microgravity

Owing to the high cost of transporting mass into space, and the small volume available for equipment in the Space Shuttle Orbiter and the International Space Station, refrigeration space is extremely limited. For this reason, there exists strong motivation for transporting certain drugs in powdered form so that they do not require refrigeration. When needed, the powdered drug will be mixed with saline to obtain a liquid form that may be injected intravenously. While this is a relatively simple task in a 1-G environment, there are some difficulties that may be encountered in 0-G. In non-accelerated spaceflight, gravitational and inertial forces are eliminated allowing other smaller forces, such as capillary forces and surface tension, to dominate the behavior of fluids. For instance, water slowly ejected from a straw will tend to form a sphere, while fluid in a container will tend to wet the inside surface forming a highly rounded meniscus. Initial attempts at mixing powdered drugs with saline in microgravity have shown a tendency toward forming foamy emulsions instead of the desired homogeneous solution. The predominance of adhesive forces between the drug particles and the interface tensions at the gas/liquid and solid/liquid interfaces drastically reduce the rate of deaggregation of the drug powder and also reduce the rate of absorption of saline by the powder mass. In addition, the capillary forces cause the saline to wet the inside of the container, thus trapping air bubbles within the liquid. The rate of dissolution of a powder drug is directly proportional to the amount of surface area of the solid that is exposed to liquid solvent. The surface area of drug that is in contact with the liquid is greatly reduced in microgravity and, as a result, the dissolution rate is reduced as well. The KC-135 research described here was aimed at evaluating the extent to which it is possible to perform drug reconstitution in the weightlessness of parabolic flight using standard pharmacological supplies. The experiment included a parametric assessment of possible factors affecting the reconstitution process. The specific questions that we wished to answer were: (1) Is it possible to reconstitute powdered drugs in weightlessness using standard pharmacological equipment? (2) What are the differences between drug reconstitution in a 1-G and a 0-G environment? (3) What techniques of mixing the drug powder and diluent are more successful? (4) What physical and chemical factors play a role in determining the success of mixing and dissolution? (5) Is it necessary to employ crewmember and equipment restraints during the reconstitution process?

Schaffner, Grant↗

Assessing Organic Preservation and the Implications for Potential Biosignatures in the Bastide Member of the Séítah Formation, Jezero Crater

Introduction: Olivine has the highest CO2 trapping potential of ultramafic minerals, due to its rapid rate of dissolution and high percentage of divalent cations/unpolymerized silicate tetrahedra [1]. It generates divalent carbonates from CO2 and sequesters CO2 into the mineral matrix of the target lithology. The co-occurrence of olivine and carbonate within abraded targets from the Bastide Member of the Séítah Formation (Fm) of the Jezero crater floor [2] suggests the carbonation of olivine occurred within the mineral matrix hosted in a subsurface system. Hydrothermal origins for the subsurface system are hypothesized from orbital data [3]. This is supported by the detection of hydration features within the rock as well as the carbonate features are solely detected within the abrasion patch but not the rock’s surface. Organic preservation potential of abrasion patches: We incorporated the SHERLOC/WATSON results acquired from the Dourbes, Garde, and Quartier abrasion patches in the Séítah Fm to investigate the organomineral associations, and determine the biosignature preservation potential of these rocks. Dourbes is dominated by olivine and has minor amounts of carbonate, hydrated Ca-sulfate, and amorphous or microcrystalline silicate. Fluorescence features (330-340 nm) are detected in discrete locales and could be consistent with double ring aromatic organic molecules; yet, these features do not appear to be associated with an identified mineral phase. Dark subhedral to euhedral olivine grains within the Garde abrasion patch often co-occur with carbonate-consistent spectral signatures in all analyzed scans. The availability of Fe2+ is a known influence on olivine dissolution rates [1] and SuperCam estimates of the olivine composition (Forsterite-60 average for Sols 202-234) may thereby provide a constraint on the carbonation extent. Carbonated olivine phenocrysts within the matrix may be due to aqueous alteration, as the carbonation of nodules is consistent with observations in other hydrothermal systems and within Martian meteorites (ALH84001) [4]. In comparison, the Quartier abrasion patch represents an extensively altered endmember within the Bastide Member of the Séítah Fm. It contains a fluorescence doublet at 305/325 nm that coexists with multiple species of Na-sulfate and Mg-sulfate, Mg-carbonates, olivine [5]. Aqueous alteration and implications for habitability: The identification of primary and secondary mineral phases observed in the Bastide Member suggests the release of cations from primary ultramafic minerals through aqueous alteration. Within Garde, the carbonate detected appears to be Mg-rich and likely formed from the in situ alteration of Mg-rich olivine within the region as carbonate has only been detected within the rock via in situ analysis. Carbonates derived from abiotic and biotic reactions preserve biosignatures (i.e. indices of habitability) on Earth. The detected carbonate phase found in association with fluorescent features within the rock matrix may also indicate potential organic compounds preserved in a putative hydrothermal system. Fluorescent features (~330 nm) are unique to Garde and Dourbes, though they are co-located to carbonate signatures solely within Garde, and between the light toned minerals. Identification of these fluorescent features may be consistent with 1-2 ring aromatic compounds. The limit of detection for Raman is multiple orders of magnitude greater than the limit of detection required for fluorescence [6]. Implications for provenance: Hydrothermal systems represent disequilibrium chemical conditions that are hypothesized to have supported the emergence of life and also preserve ancient carbon within precipitated carbonates [7]. Hydrothermal system associated carbonates are capable of preserving biosignatures up to an estimated ~3.77 – 4.28 Gya [8]. Thus, carbonated olivine found within the Séítah Fm may represent a high-potential biosignature preserving environment on Mars. The formation of carbonates by an aqueous alteration process, such as carbonation of olivine is also consistent with hypotheses for carbonate within the greater regional-olivine bearing unit [2,3], which contains Garde, Dourbes, and Quartier. Acknowledgments: This work was carried out at the Jet Propulsion Laboratory, The California Institute of Technology under a contract from NASA. References: [1] Wood et al., (2019) ES&T, 6, 10. [2] Stack, K. et al., (2020) Space Sci Rev, 216, 127. [3] Tarnas, J. et al., (2021) JGR: Planets, 126, 11. [4] Steele et al., (2007) Meteorit. Planet. Sci., 42, 9. [5] Murphy, A.E. et al., (2022) LPSC [6] Bhartia et al., (2021) Space Sci Rev, 217, 58. [7] Luther (2021) GRL, 48, e2021GL094869. [8] Dodd et al., (2017) Nature, 543, 60-64

E L Cardarelli↗

A model for nonlinear collisionless reconnection

The time dependence and scaling of the electric and magnetic field components during the nonlinear phase of reconnection of 'thin' unstable neutral layers (thickness approximately equals electron gyroradius) are investigated. Solutions to model equations show an initial interval of rapid growth and subsequent large-amplitude fluctuations of the trapped magnetic flux and the ion kinetic energy. The fluctuations arise from the transient formation, merging, and dissolution of magnetic islands.

Lovelace, R. V. E.↗

Lunar and Planetary Science XXXV: Viewing the Lunar Interior Through Titanium-Colored Glasses

The session"Viewing the Lunar Interior Through Titanium-Colored Glasses" included the following reports:Consequences of High Crystallinity for the Evolution of the Lunar Magma Ocean: Trapped Plagioclase; Low Abundances of Highly Siderophile Elements in the Lunar Mantle: Evidence for Prolonged Late Accretion; Fast Anorthite Dissolution Rates in Lunar Picritic Melts: Petrologic Implications; Searching the Moon for Aluminous Mare Basalts Using Compositional Remote-Sensing Constraints II: Detailed analysis of ROIs; Origin of Lunar High Titanium Ultramafic Glasses: A Hybridized Source?; Ilmenite Solubility in Lunar Basalts as a Function of Temperature and Pressure: Implications for Petrogenesis; Garnet in the Lunar Mantle: Further Evidence from Volcanic Glasses; Preliminary High Pressure Phase Relations of Apollo 15 Green C Glass: Assessment of the Role of Garnet; Oxygen Fugacity of Mare Basalts and the Lunar Mantle. Application of a New Microscale Oxybarometer Based on the Valence State of Vanadium; A Model for the Origin of the Dark Ring at Orientale Basin; Petrology and Geochemistry of LAP 02 205: A New Low-Ti Mare-Basalt Meteorite; Thorium and Samarium in Lunar Pyroclastic Glasses: Insights into the Composition of the Lunar Mantle and Basaltic Magmatism on the Moon; and Eu2+ and REE3+ Diffusion in Enstatite, Diopside, Anorthite, and a Silicate Melt: A Database for Understanding Kinetic Fractionation of REE in the Lunar Mantle and Crust.

Source record↗

Survival of Organic Materials in Ancient Cryovolcanically-Produced Halite Crystals

Spectroscopic evidence supports the presence of Mg-Na-K salts derived from cryovolcanism on the surface of Europa. Halite (NaCl) is effective at very long-term preservation of organic phases and structures. Collection of salt crystals from Europan plumes would provide solid inclusions of organics, potentially also biomaterials, all suitable for analysis. Two thermally-metamorphosed ordinary chondrite regolith breccias (Monahans 1998 (H5) and Zag (H3-6)) contain fluid and solid inclusion-bearing halite crystals, dated to approximately 4.5 billion years, and thus the trapped aqueous fluids and solids are at least as old. Heating/freezing studies of the aqueous fluid inclusions in these halites demonstrated that they were trapped near 25 degrees Centigrade, and their continued presence in the halite grains requires that their incorporation into the H chondrite asteroid occurred after that body's metamorphism ended, since heating would have dessicated the halite. O and H isotopes of the trapped fluids are consistent with mixing of asteroidal and cometary water. Cryovolcanic Origin of the Halite: We hypothesize that these meteoritic halites derive from ancient cryovolcanism based on the following points. (1) Salts crystals are observed as products of current cryovolcanism on Enceladus. (2) In-situ spacecraft analysis of some of the icy grains associated with the Enceladus salt found minor organic or siliceous components, including methane, also found in the Monahans halite. (3) Cryovolcanic fluids are observed to be in chemical disequilibrium, reflecting incomplete reactions between interior volatiles and rocky materials. The coexistence of N2 and HCN in Enceladus' cryovolcanic fluids requires that the plume consists of a mixture of materials whose sources experienced different degrees of aqueous processing, including primordial material trapped in ice that has not been in contact with liquid water. The observed mineral assemblage within the Monahans and Zag halites is also far from equilibrium. Cryovolcanoes on Ceres are a potential source of our halite, however the processes that form halite should also be operating within Europa. Dissolution of Monahans halite grains has revealed a remarkable variety of organics, which dominate the population of solid inclusions. Thermal alteration of this macromolecular carbon (measured by Raman spectroscopy) shows remarkable diversity. We have identified highly-condensed aromatics, diamond, carbonates and chloromethane. Light organic compounds like methane tend to be water soluble and require cold formation temperatures at high hydrogen fugacity - i.e. require water ice. Another indication that these halites have not been heated is that light organics readily volatilize or aromaticize into PAHs. We are currently analyzing the organics by Raman and C-XANES, and measuring the content and exploring the potential chirality of amino acids in the halite. Implications for Europa Plumes: Organic materials and structures erupted by a Europa cryovolcano should be similarly preserved within halite, and other salts, which will be a convenient form for capture and analysis, since halite will serve to encapsulate and protect the organics from spacecraft contamination. Also, being transparent at many wavelengths halite will permit analysis by spacecraft-mounted spectroscopic techniques. In addition, halite is readily dissolved, permitting further analysis of entrained organics.

Zolensky, M.↗

Stable isotopic biogeochemistry of carbon and nitrogen in a perennially ice-covered Antarctic lake

Lake Hoare (77 degrees 38' S, 162 degrees 53' E) is an amictic, oligotrophic, 34-m-deep, closed-basin lake in Taylor Valley, Antarctica. Its perennial ice cover minimizes wind-generated currents and reduces light penetration, as well as restricts sediment deposition into the lake and the exchange of atmospheric gases between the water column and the atmosphere. The biological community of Lake Hoare consists solely of microorganisms -- both planktonic populations and benthic microbial mats. Lake Hoare is one of several perennially ice-covered lakes in the McMurdo Dry Valleys that represent the end-member conditions of cold desert and saline lakes. The dry valley lakes provide a unique opportunity to examine lacustrine processes that operate at all latitudes, but under an extreme set of environmental conditions. The dry valley lakes may also offer a valuable record of catchment and global changes in the past and present. Furthermore, these lakes are modern-day equivalents of periglacial lakes that are likely to have been common during periods of glacial maxima at temperate latitudes. We have analyzed the dissolved inorganic carbon (DIC) of Lake Hoare for delta 13C and the organic matter of the sediments and sediment-trap material for delta 13C and delta 15N. The delta 13C of the DIC indicates that 12C is differentially removed in the shallow, oxic portions of the lake via photosynthesis. In the anoxic portions of the lake (27-34 m) a net addition of 12C to the DIC pool occurs via organic matter decomposition. The dissolution of CaCO3 at depth also contributes to the DIC pool. Except near the Canada Glacier where a substantial amount of allochthonous organic matter enters the lake, the organic carbon being deposited on the lake bottom at different sites is isotopically similar, suggesting an autochthonous source for the organic carbon. Preliminary inorganic carbon flux calculations suggest that a high percentage of the organic carbon fixed in the water column is remineralized as it falls through the water column. At nearby Lake Fryxell, the substantial (relative to Lake Hoare) glacial meltstream input overprints Fryxell's shallow-water biological delta 13C signal with delta 13C-depleted DIC. In contrast, Lake Hoare is not significantly affected by surface-water input and mixing, and therefore the delta 13C patterns observed arise primarily from biological dynamics within the lake. Organic matter in Lake Hoare is depleted in 15N, which we suggest is partially the result of the addition of relatively light inorganic nitrogen into the lake system from terrestrial sources.

NASA Program Exobiology↗

Dissociation of O(2-)2 defects into paramagnetic O(-) in wide band-gap insulators - A magnetic susceptibility study of magnesium oxide

The magnetic susceptibility of single-crystal MgO has been measured in the temperature range 300-1000 K, using a Faraday balance. The high-purity crystal (less than 100 ppm transition metals), grown from the melt in a H2O-containing atmosphere, was found to be paramagnetic due to the presence of defects on the O(2-) sublattice. The defects derive from OH(-) introduced into the MgO matrix by the dissolution of traces of H2O during crystal growth. The OH(-) converts into O(2-)2 and H2. Each O(2-)2 represents two coupled, spin-paired O(-) states. The observed strongly temperature-dependent paramagnetism can be described by three contributions that overlay the intrinsic diamagnetism of MgO and arise from the low level of transition-metal impurities, O(-) generated by 0(2-)2 dissociation, and O(-) states trapped by quenching from high temperatures from previous experiments.

Batllo, F.↗

Fluids During Diagenesis and Sulfate Vein Formation in Sediments at Gale Crater, Mars

We model the fluids involved in the alteration processes recorded in the Sheep bed Member mudstones of Yellowknife Bay (YKB), Gale crater, Mars, as revealed by the Mars Science Laboratory Curiosity rover investigations. We compare the Gale crater waters with fluids modeled for shergottites, nakhlites, and the ancient meteorite ALH 84001, as well as rocks analyzed by the Mars Exploration rovers, and with terrestrial ground and surface waters. The aqueous solution present during sediment alteration associated with phyllosilicate formation at Gale was high in Na, K, and Si; had low Mg, Fe, and Al concentrations relative to terrestrial ground waters such as the Deccan Traps and other modeled Mars fluids; and had near neutral to alkaline pH. Ca and S species were present in the 10(exp -3) to 10(exp -2) concentration range. A fluid local to Gale crater strata produced the alteration products observed by Curiosity and subsequent evaporation of this ground water- type fluid formed impure sulfate- and silica-rich deposits veins or horizons. In a second, separate stage of alteration, partial dissolution of this sulfate-rich layer in Yellowknife Bay,or beyond, led to the pure sulfate veins observed in YKB. This scenario is analogous to similar processes identified at a terrestrial site in Triassic sediments with gypsum veins of the Mercia Mudstone Group in Watchet Bay, UK.

Gale Crater↗

Environmental fatigue of an Al-Li-Cu alloy. Part 2: Microscopic hydrogen cracking processes

Based on a fractographic analysis of fatigue crack propagation (FCP) in Al-Li-Cu alloy 2090 stressed in a variety of inert and embrittling environments, microscopic crack paths are identified and correlated with intrinsic da/dN-delta K kinetics. FCP rates in 2090 are accelerated by hydrogen producing environments (pure water vapor, moist air, and aqueous NaCl), as defined in Part 1. For these cases, subgrain boundary fatigue cracking (SGC) dominates for delta K values where the crack tip process zone, a significant fraction of the cyclic plastic zone, is sufficiently large to envelop 5 micron subgrains in the unrecrystallized microstructure. SGC may be due to strong hydrogen trapping at T1 precipitates concentrated at sub-boundaries. At low delta K, the plastic zone diameter is smaller than the subgrain size and FCP progresses along (100) planes due to either local lattice decohesion or aluminum-lithium hydride cracking. For inert environments (vacuum, helium, and oxygen), or at high delta K where the hydrogen effect on da/dN is small, FCP is along (111) slip planes; this mode does not transition with increasing delta K and plastic zone size. The SGC and (100) crystallographic cracking modes, and the governing influence of the crack tip process zone volume (delta K), support hydrogen embrittlement rather than a surface film rupture and anodic dissolution mechanism for environmental FCP. Multi-sloped log da/dN-log delta K behavior is produced by changes in process zone hydrogen-microstructure interactions, and not by purely micromechanical-microstructure interactions, in contradiction to microstructural distance-based fatigue models.

Robert S Piascik↗