Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “dinuclear catalysts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Highly stable preferential carbon monoxide oxidation by dinuclear heterogeneous catalysts

Atomically dispersed catalysts have been shown highly active for preferential oxidation of carbon monoxide in the presence of excess hydrogen (PROX). However, their stability has been less than ideal. We show here that the introduction of a structural component to minimize diffusion of the active metal center can greatly improve the stability without compromising the activity. Using an Ir dinuclear heterogeneous catalyst (DHC) as a study platform, we identify two types of oxygen species, interfacial and bridge, that work in concert to enable both activity and stability. In conclusion, the work sheds important light on the synergistic effect between the active metal center and the supporting substrate and may find broad applications for the use of atomically dispersed catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dinuclear Ce(IV) Aryloxides: Highly Active Catalysts for Anhydride/Epoxide Ring-Opening Copolymerization

Here, a library of new dinuclear CeIV complexes of the type [NEt 4 ] 2 [Ce 2 X 6 (TP)(sol) 2 ] (X = Cl, ODipp, OSiMe 3 ; sol = py, THF), where TP represents a family of tetraphenolate ligands that control intermetallic distance, are readily made in good yields. The ligands strongly stabilize the cerium +4 oxidation state and allow the incorporation of alkylammonium cocations in an "ate"complex formulation that enables them to be used as soluble, single-component catalysts for the ring-opening copolymerization (ROCOP) of a variety of anhydrides and epoxides. High turnover frequencies (TOFs) are achieved with high ester linkage selectivity, low dispersities, and rates that are highly tunable by the intermetallic distance enforced by the TP ligand, demonstrating that a closely coupled di-Ce IV unit provides excellent rates of ROCOP catalysis and that, more generally, rare-earth complexes deserve further attention as ROCOP initiators.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Photocatalytic Aqueous CO 2 Reduction to CO and CH 4 Sensitized by Ullazine Supramolecular Polymers

There has been rapid progress on the chemistry of supramolecular scaffolds that harness sunlight for aqueous photocatalytic production of hydrogen. However, great efforts are still needed to develop similar photosynthetic systems for the great challenge of CO 2 reduction especially if they avoid the use of nonabundant metals. This work investigates the synthesis of supramolecular polymers capable of sensitizing catalysts that require more negative potentials than proton reduction. The monomers are chromophore amphiphiles based on a diareno-fused ullazine core that undergo supramolecular polymerization in water to create entangled nanoscale fibers. Under 450 nm visible light these fibers sensitize a dinuclear cobalt catalyst for CO 2 photoreduction to generate carbon monoxide and methane using a sacrificial electron donor. The supramolecular photocatalytic system can generate amounts of CH 4 comparable to those obtained with a precious metal-based [Ru(phen) 3 ](PF 6 ) 2 sensitizer and, in contrast to Ru-based catalysts, retains photocatalytic activity in all aqueous media over 6 days. Furthermore, the present study demonstrates the potential of tailored supramolecular polymers as renewable energy and sustainability materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dinuclear Gold(I) Complexes Bearing Alkyl-Bridged Bis(N-heterocyclic carbene) Ligands as Catalysts for Carboxylative Cyclization of Propargylamine: Synthesis, Structure, and Kinetic and Mechanistic Comparison to the Mononuclear Complex [Au(IPr)Cl]

Eight new dinuclear gold(I) complexes, [Au 2 (L)X 2 ] (1–8), were synthesized using a straightforward synthetic procedure under very mild conditions. The complexes have been characterized by NMR spectroscopy, elemental analysis, and single-crystal X-ray structure analysis. Their catalytic activity was investigated in the carboxylative cyclization of propargylamine (PPA). A superior performance in comparison to [Au(IPr)Cl] (9) was obtained for complexes 1 and 2 having an eight-methylene bridge connecting two NHCs with an arene bearing an isopropyl substituent for X = Cl, Br. This prompted more detailed kinetic and mechanistic studies by FTIR comparing dinuclear complex 2 of X = Cl to complex 9. Fortuitously the FTIR studies allowed monitoring of the formation of the products carbamic acid (CA) and carbamate salt (CS), as well as a key cyclized intermediate first discovered by Ikariya. These data allow additional insight into the mechanism as well as the central role which may be played by Au(I) carbamate formation as a higher energy resting state present in the catalytic cycle. In conclusion, the crystal structures of four of the new complexes and a detailed computational study relevant to the role of carbamic acid (CA) and carbamates in the catalytic cycle are also reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Supported Metal Pair-Site Catalysts

Complexes with neighboring metal centers in isolated pairs and their analogues on surfaces are drawing increasing attention as catalysts. These include molecular homogeneous catalysts incorporating various ligands, enzymes, and solids that include pairs of metal atoms mounted on supports. Catalysts in this broad class are active for numerous reactions and offer unexplored opportunities to address challenging reactions, such as oxidation of methane and oxidation of water in artificial photosynthesis. The subject of supported metal pair-site catalysts is in its infancy, facing challenges in (a) precise synthesis, (b) structure determination at the atomic scale, and (c) stabilization in reactive atmospheres. In this Perspective, we summarize key characteristics of molecular and enzymatic catalysts that incorporate neighboring metal centers and build on this foundation to assess the emerging literature of metal pair-site catalysts on various supports. The supported catalysts include those synthesized by anchoring molecular dinuclear precursors to support surfaces and those synthesized by selective formation of dinuclear surface species from mononuclear surface species. Examples of metals in this class are rhodium and iridium, and examples of supports are MgO and Fe 2 O 3 . We summarize characterization of these materials by electron microscopy and spectroscopy, emphasizing atomic-resolution aberration-corrected scanning transmission electron microscopy and spectroscopies that provide atomic-scale structural information and allow characterization of functioning catalysts, especially X-ray absorption spectroscopy. Finally, we list some opportunities for research, including suggestions that might lead to structurally well-defined supported metal pair-sites with new catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Catalytic Ambient Temperature Dinitrogen Conversion to a Bis(silyl)amine by Mononuclear Group 4 Aryloxide Complexes

The homogeneous conversion of ambient dinitrogen to amine products via the N2 reduction reaction (N2RR) remains a prized yet challenging feat for d-block complexes and is scarcely reported for f-block complexes. New, mononuclear TiIV and ZrIV aryloxide complexes Ti(DP)2 (1Ti), Zr(DP)2 (1Zr), and DP = [2-(OC6H2-2-tBu,4-Me)2CHPh] produce up to 51 eq. and up to 7.0 eq. of HN(SiMe3)2 per Ti/Zr, from N2, K0, weak acid, and chlorotrimethylsilane. Complex 1Ti exhibits more than double the activity toward N2-silylation of any previously reported Ti N2RR catalyst and can also catalyze the formation of up to 19 eq. of NH3, a new feature in early metal N2RR chemistry. The mononuclear 1Zr is the most active Zr catalyst for N2-silylation to date. [KSm(DP)2(THF)3] (1Sm), the mononuclear analogue of our previously reported dinuclear A-Sm complex, displays only stoichiometric N2-silylation due to its vulnerability to deleterious side reactions. DFT calculations confirm the catalysis can proceed via a monomeric Ti complex with a terminally bound, activated N2, agreeing with experimental 1H DOSY NMR measurements; the N-H bond is formed first, directing the catalyst selectivity. The isolable reduction product [K3(THF)Ti(DP)(DP-)(N2)] is also an active catalyst, and an intermediate in the calculated cycle.

Hernandez, Matthew↗
DOE OSTI2022

Bioinspired oxidation of benzyl alcohol: The role of environment and nuclearity of the catalyst evaluated by multivariate analysis

Inspired by copper-containing enzymes such as galactose oxidase and catechol oxidase, in which distinct coordination environments and nuclearities lead to specific catalytic activities, we summarize here the catalytic properties of dinuclear and mononuclear copper species towards benzyl alcohol oxidation using a multivariate statistical approach. Here, the new dinuclear [Cu 2 (μ-L 1 )(μ-pz)] 2+ (1) is compared against the mononuclear [CuL 2 Cl] (2), where (L 1 ) - and (L 2 ) - are the respective deprotonated forms of 2,6-bis((bis(pyridin-2-ylmethyl)amino)methyl)-4-methylphenol, and 3-((bis(pyridin-2-ylmethyl)amino)methyl)-2-hydroxy-5-methylbenzaldehyde and (pz) - is a pyrazolato bridge. Copper(II) perchlorate (CP) is used as control. The catalytic oxidation of benzyl alcohol is pursued, aiming to assess the role of the ligand environment and nuclearity. The multivariate statistical approach allows for the search of optimal catalytic conditions, considering variables such as catalyst load, hydrogen peroxide load, and time. Species 1, 2 and CP promoted selective production of benzaldehyde at different yields, with only negligible amounts of benzoic acid. Under normalized conditions, 2 showed superior catalytic activity. This species is 3.5-fold more active than the monometallic control CP, and points out to the need for an efficient ligand framework. Species 2 is 6-fold more active than the dinuclear 1, and indicates the favored nuclearity for the conversion of alcohols into aldehydes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective Reduction of Carbon Dioxide in Water Using [M(bpy2+)(CO)3(I)]2+ (M = Mn, Re) Electrocatalysts with Pendent Cations

Manganese(I) carbonyl complexes are promising electrocatalysts for CO2 reduction, yet their application in homogeneous aqueous media remains limited by poor solubility and selectivity. Here, we report water-soluble Mn(I) and Re(I) complexes fac-[M(bpy2+)(CO)3X]2+ (X = I or Cl), featuring bipyridine ligands functionalized with -Ph-CH2-(NMe3)+ cationic ammonium groups that integrate water solubility with secondary-sphere stabilization. In bicarbonate buffer at pH 6.8, the Mn catalyst is completely selective for CO production at a low overpotential (η = 0.3 V), operating by a protonation-first mechanism with observed rates of ~10 s−1. Pulse radiolysis reveals that the one-electron reduced Mn species undergoes dimerization in the absence of CO2 but uniquely reacts competitively with CO2 through an initial pre-equilibrium followed by fast formation of a dinuclear CO2-bridged species (ΔGo = −12.4 kcal mol−1). At a higher 0.6 V over-potential, a faster reduction-first pathway (~100 s−1) is available upon reduction of the metallo-carboxylic acid intermediate, Mn-CO2H2+; however, this regime is functionally limited by the formation of a resistive, noncatalytic film on the electrode surface. Comparison to the analo-gous water-soluble Re catalyst (kobs = 440 s−1, η = 0.6 V) highlights the distinct mechanistic ad-vantages of earth-abundant Mn in low-potential catalysis. These results demonstrate how cati-onic second-sphere design enables selective, homogeneous CO2 reduction in water while reveal-ing competing radical and electrode-mediated processes that govern catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manganese(II) complexes of 1,1'-bis[(pyridin-2-yl)methyl)]-2,2'-bipiperidine (PYBP): Synthesis, structure, catalytic properties in alkene epoxidation with hydrogen peroxide, and related mechanistic studies

In this study, several manganese(II) complexes with the stereoisomers of ligand PYBP (1,1'-bis[(pyridin-2-yl)methyl]-2,2'-bipiperidine) and different anions were prepared and characterized by X-ray diffractometry. Complex [Mn II (rac-PYBP)] 2+ (1) was found to be an efficient catalyst of alkene epoxidation by hydrogen peroxide in the presence of acetic acid in acetonitrile at room temperature. Cyclooctene was converted to its epoxide with up to 91 % yield, 99.6 % selectivity, and the turnover number of 180 within 5 min. Fast epoxidations of cyclohexene, 1-decene, styrene, and cis-stilbene were also achieved. Isomeric complex [Mn II (meso-PYBP)] 2+ (2) was catalytically inactive under the same experimental conditions. Stopped-flow spectrophotometry and freeze-quenched EPR spectra show that complex 2 is not oxidized by H 2 O 2 in the presence of acetic acid (AcOH) but instead undergoes partial ligand protonation and liberation of the Mn 2+ cations due to the relatively poor chelating ability of ligand meso-PYBP. The rac-PYBP isomer acts as a better ligand and retains the coordinated Mn center when complex 1 is treated with the H 2 O 2 /AcOH mixture in acetonitrile solution yielding a mixture of intensely colored intermediates likely involving Mn III , Mn IV , and Mn V complexes. Magnetic susceptibility measurements, UV–vis and EPR spectra suggest that dinuclear complexes [Mn III 2 (μ-O)(μ-OAc)(rac-PYBP) 2 ] 3+ and [Mn III Mn IV (μ-O) 2 (rac-PYBP) 2 ] 3+ gradually accumulate in the reaction mixture as inactivated states of the catalyst. Complex 1 also causes fast decomposition of hydrogen peroxide into O 2 gas and H 2 O, which competes with the epoxidation of alkenes and requires gradual addition of H 2 O 2 for its efficient use. The catalytic activity of complex 1 is strongly influenced by its counterions and decreases in order ClO 4 - ≈ SbF 6 - > NO 3 – > Cl - indicating that labile ligands in the coordination sphere of Mn are required for the activation of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ab Initio Molecular Dynamics Study of Pd Nucleation on a γ-Al 2 O 3 Surface

We perform ab initio molecular dynamics (AIMD) free energy simulations to investigate the stability and dynamics of dispersed Pd atoms and subnanometer clusters on γ-Al 2 O 3 . We consider nucleation for varying Pd loadings on dry γ-Al 2 O 3 (100), dry γ-Al 2 O 3 (110) and wet γ-Al 2 O 3 (110) and examine temperature, entropy and water coverage effects on the stability and dynamics of Pd clusters. At low Pd loading (1.07 Pd atoms/nm 2 on the (100) and 0.75 Pd/nm 2 on the (110)), association of the Pd atoms is thermodynamically unfavorable on the dry surfaces and almost thermoneutral on the wet (110) owing to water blocking of the AlIII defect sites. In agreement with past studies, the Pd atoms are quite mobile but the diffusion free energy barriers do not increase with the water coverage, as previously suggested, but rather remain similar in magnitude owing to translational entropy at finite temperatures. At these Pd loadings, oxidized Pd(II) atoms on the wet (110) surface are dispersed and immobile. At higher Pd loading (1.12 and 1.5 Pd atoms/nm 2 ) on the (110) surface, Pd 3 and Pd 4 clusters are thermodynamically very stable and form fast. At the 1.12 Pd atoms/nm 2 loading, the formation of the Pd 3 cluster is two orders of magnitude slower when the surface is hydroxylated as the system becomes somewhat trapped before the dinuclear cluster Pd 2 collides with a Pd atom.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Bidirectional Suzuki Catalyst Transfer Polymerization of Poly( p -phenylene)

Suzuki catalyst transfer polymerization (SCTP) has emerged as an effective method for accessing length-controlled π-conjugated poly(p-phenylene). Regio-controlled functional group sequencing along the backbone and the chain ends of synthetic polymers remains a challenge for the successful integration of organic semiconductors in sensors and electronic devices. Here, we report a bidirectional SCTP system based on dinuclear palladium(II) initiators. Functional groups transferred during the initiation and termination steps unlock independently addressable synthetic handles at the polymer core and respective chain ends. These functional groups open opportunities for late-stage regio-controlled and chemoselective derivatizations. Control over key polymer parameters, including molecular weight (M n ), dispersity ( Đ = M w /M n ), degree of polymerization ( DP ), termination efficiency, and functional group interconversion, is corroborated by size exclusion chromatography (SEC) and NMR spectroscopy. The modular design of SCTP initiators, in combination with commercially available terminating groups, represents a highly flexible toolbox for late-stage polymer conjugation, e.g., chemoselective anchoring groups for integration with functional electronics or bioorthogonal conjugation for molecular sensing.

Aldehydes↗
DOE OSTI2021

An Iron-Based Dehydration Catalyst for Selective Formation of Styrene

In this work, we report the synthesis and crystal structure of [Fe(OTf) 2 (FOX)] (A). This robust iron(II) complex was successfully applied as a homogeneous catalyst for the dehydration of 1-phenylethanol to styrene. Even at low catalyst loadings and moderate reaction temperatures, A showed a high catalytic efficiency. It was found to selectively activate the benzylic alcohol group of 1-phenylethanol. This is challenging since the vinyl system of styrene is highly reactive. In contrast to most of the other dehydration processes, the use of a Brønsted acid was not necessary. Furthermore, mechanistic insights into this E 1 -type transformation and its competing S N 1-type side reactions are reported. [Fe( c HexOH)(OTf)(FOX)][OTf] (B), an alcohol adduct of A, [Fe(H 2 O) 2 (FOX)][OTf] 2 (C), the completely hydrated derivative of A, and [μ-O{Fe(OTf)(FOX)} 2 ][OTf] 2 (D), a dinuclear oxidation product of A, were also characterized and are discussed.

02 PETROLEUM↗
DOE OSTI2026

Mechanistic Studies of an Iron-Catalyzed Intermolecular C–H Amination Reaction under Catalytic Conditions and Having a Large KIE

The conversion of C–H bonds into amines by nitrene insertion is an attractive transformation since it is both atom- and step-economical, and provides a direct route to functionalizing hydrocarbons. Using an iron catalyst [{( tBu pyrr) 2 pyr}Fe(OEt 2 )] (1-OEt 2 ) (( tBu pyrr) 2 pyr 2– = 3,5- t Bu 2 -bis(pyrrolyl)pyridine), we recently demonstrated the catalytic conversion of weak C–H bonds into secondary amines using aryl azides as the nitrene source [Zars, E.; Angew. Chem., Int. Ed. 2023, 62, e202311749]. Here, we describe detailed mechanistic studies of this intermolecular C–H amination reaction under catalytic conditions. We find by Variable Time Normalization Analysis (VTNA) that the conversion of xanthene (2-H 2 ) and 2,4,6-trimethyl-phenyl azide ( Me 3) catalyzed by 1-OEt 2 is an overall 3/2 order process, being 1 st order in 2-H 2 and half order in Me 3. A kinetic isotope effect study (KIE) using 2-d 2 results in a significant decrease in the rate (KIE = 61(15)), which clearly implicates the C–H insertion step as rate-determining. Furthermore, treatment of 1-OEt 2 with one equivalent of N 3 -2,6- i Pr 2 –C 6 H 3 yields the mixed-valence C–N coupled product [( tBu pyrr) 2 pyrFe-N═C(2,6 i Pr 2 –Ph)═N-(2,6 i Pr 2 –Ph))Fe tBu pyrrpyr(2-H-pyrr)] (5 iPr ). Quantum chemical calculations confirm the electronic structure of the mixed-valence dimer in 5 iPr and rationalize the Hammett correlation by a delicate balance in the dinuclearization of the catalytically active monomers. Calculations further indicate significant tunneling for the pivotal H atom abstraction by the iron-imidyl complex. Combining all these results allows us to propose a mechanism consisting of imido formation in equilibrium with a radical-coupled diiron system, followed by stepwise C–H insertion via a linear H atom abstraction transition state and subsequent radical rebound.

azides↗
DOE OSTI2025

Active Sites in the Dealuminated Beta Zeolite-Supported Cobalt Catalyst for Non-Oxidative Ethane Dehydrogenation

Dispersed metal species in siliceous zeolites have been actively studied for non-oxidative dehydrogenation of ethane (NDE). Fundamental insights into the dynamics of metal species in zeolites under reaction conditions have rarely been explored. Herein, we report an atomic level understanding of the dynamics and activity of cobalt (Co) sites in dealuminated Beta zeolite (DeAl-BEA) for NDE during induction and reaction conditions with extensive characterization techniques such as diffuse reflectance UV–vis, solid state nuclear magnetic resonance and X-ray photoelectron, X-ray diffraction along with in situ Fourier transform infrared and X-ray absorption spectroscopy. For a catalyst with 0.5 mass % Co loading, tetrahedral Co 2+ mononuclear sites, di-coordinated to the zeolite framework and with two silanol groups in vicinity (i.e., (≡SiO) 2 Co(HO–Si≡) 2 ), form upon exposure to hydrogen during induction and persist through the NDE reaction. Increasing the Co loading to 3.0 mass % yielded Co sites with similar electronic and coordination structures but slightly elongated Co–O bonds. Upon cooling to room temperature, the Co sites persisted in the same coordination environment, though the disappearance of a feature in the Co K-edge near-edge region revealed changes in the active site’s electronic structure coinciding with modest shifts in bond lengths. The electronic structure and activity of (≡SiO) 2 Co(HO–Si≡) 2 sites were studied comparatively to a few other hypothetical Co 2+ coordination structures, using electronic structure calculations and microkinetic simulations. The simulations showed that NDE is controlled by β-hydride elimination following C–H bond activation and that Co-sites possessing flexibility because of neighboring silanol defects are more active. Interestingly, dinuclear Co–O–Co sites (i.e., (≡SiO)Co(HO–Si≡) 2 –O–(HO–Si≡) 2 Co(≡SiO)) were more active than the mononuclear (≡SiO) 2 Co(HO–Si≡) 2 sites because of favorable hydrogen bonding with the vicinal silanol groups. In conclusion, the present study bridges the gap between the knowledge acquired by ex-situ characterizations and the active sites under the reaction conditions in alkane dehydrogenation chemistry.

36 MATERIALS SCIENCE↗