Rate parameters for the reaction of atomic hydrogen with dimethyl ether and dimethyl sulfide
Explore the source record for details and available documents.
Lee, J. H.↗
SEARCH · Engineering Papers
Results for “dimethyl ether”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Radio detection of interstellar dimethyl ether
The detection of interstellar dimethyl ether, in emission from the direction of the Orion Nebula molecular cloud, is reported. The largest molecule detected in space, dimethyl ether has a large collisional cross section and C (sub 2V) symmetry. Hence, it should be useful for future studies of molecular pumping models.
Snyder, L. E.↗
Extraction of Terpenoids from Pine Needle Biomass Using Dimethyl Ether
Pine needles are an industrial feedstock for extracts used in a variety of applications, but conventional extraction methods often result in a degradation of the terpenoid compounds that naturally occur in loblolly pine ( Pinus taeda ). Separation of these compounds from pine biomass is an energy-intensive operation, typically requiring a significant input of thermal energy. An alternative separation approach with potential energy savings is extraction with a condensable gas, namely, dimethyl ether. Biomass materials are exposed to liquid dimethyl ether under pressure, which mobilizes the organics. The extract is then separated from the insoluble pine matter, and dimethyl ether is volatilized away from the separated organic species. A variety of terpene derivatives were extracted from pine needle biomass using this approach, including monoterpenes, sesquiterpenes, and related oxygenates, which were identified using two-dimensional gas chromatography/mass spectrometry. Additionally, the dimethyl ether-treated needles resemble needles subjected to low-temperature drying, whereas needles treated with a high-temperature drying method appear to have shrunken structures. The results suggest that dimethyl ether extraction has significant potential for separating valuable organics from complex matrices without the application of thermal energy during treatment.
dimethyl ether (DME) extraction↗
Autoignition Delay Time Measurements of Dimethyl Ether at 110 Bar Inside a Shock Tube
Fuel mixtures of propane and dimethyl ether have been proposed as potential diesel substitutes for use in compression-ignition engines. There is an interest in phasing out diesel fuel because its combustion byproducts are harmful to the environment. Propane and dimethyl ether burn cleaner and produce significantly less carbon dioxide than diesel. The combustion of these fuels at engine-relevant conditions must be characterized to create an engine capable of running on propane and dimethyl ether. In this work, IDT measurements of stoichiometric neat DME diluted in 75% argon were completed for temperatures spanning 800-1200K at 110 bar. A shock tube will be used for all experiments in this work. Experimental IDTs were then compared to simulated values using several well-established mechanisms in the literature.
Guenther, Aaron C. [University of Central Florida]↗
CH3O(A-X) fluorescence from photodissociation of dimethyl ether
The paper reports the quantitative photoabsorption and fluorescence cross sections of dimethyl ether (DME) measured with synchrotron radiation. Determinations were also made of the absolute fluorescence cross sections, the fluorescence quantum yield, and the radiative lifetime.
Suto, Masako↗
Rate Constants for the Reactions of Hydroxyl Radical with Several Alkanes, Cycloalkanes, and Dimethyl Ether
Relative rate experiements were used to measure rate constants and temperature denpendencies of the reactions of OH with propane, n-butane, n-pentane, n-hexane, cyclopropane, cyclobutane, cyclopentane, and dimethyl ether.
Hydroxyl Radical Alkanes Cycloalkanes Dimethyl Eth↗
Model-based optimization strategies for direct hydrogenation of carbon dioxide to dimethyl ether
Here, this study discusses model-based optimization strategies for CO 2 hydrogenation to dimethyl ether (DME) over aCuZnZr (CZZ) and ferrite (FER) mixed catalyst system in a packed-bed reactor configuration. A two-dimensional axisymmetric, nonisothermal packed-bed reactor model was developed using COMSOL Multiphysics 6.2 software. The model solves two-dimensional (radial and axial) heat and mass transport equations in the packed-bed and integrates intraparticle diffusion and heat transfer in a 1D approach. This powerful feature differs from a traditional porous media approach and takes into account any heat and mass transfer limitations that may exist. Analysis shows that the heat transfer limitations are negligible, but strong internal mass transfer limitations were observed at 10 ≤ WHSV ≤ 90 h -1 on the FER catalyst and at 240 °C. The optimum catalyst composition (i.e., mixing ratio) varies depending on the operating regime. The FER catalyst weight in the mixture can be as low as 5 wt.%, but the ideal composition de-pends on the internal mass transfer limitation and its relationship with the operating regime (i.e., weight hourly space velocity, temperature). A catalyst composition of 80 wt.% CZZ and 20 wt.% FER was suggested; this composition can provide high CO 2 conversion and DME production rates at a wide range of temperatures and flow rates.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Design of a High-Pressure Fuel System for Use with Dimethyl Ether
The paper documents the modeling and experimental work on a common rail fuel injection system for Dimethyl Ether, a potential diesel substitute with a low carbon intensity signature. The DME fuel system is deployed on a light duty 2.2L compression ignition engine. The paper describes the injector optimization to shift to higher flows to account for the lower heating value and density of the DME when compared to diesel. The type of the injection system used for the DME application is an advanced rendering of the Common rail noted for a one-piece piston-needle injector construction and a solenoid driven spill valve featuring a pressure balanced poppet. A dedicated high-pressure fuel pump designed to pressurize DME is used. The design results in a fast acting open and close injection event, reduced leakage, with reduced cavitation in the fuel injector volume. Design parameters for system optimization included fill and spill orifices, needle lift, bias spring, and injector hole size. The design model provides good correlation of the instantaneous rates of injection with experiments across a wide range of pressure and injection timings. Proposed performance milestones for the design included similar DME injection duration to the diesel counterpart for same fuel energy injected into the cylinder to retain high engine cycle efficiency. Here, the dedicated DME design provided reduced hydraulic delays of 50%. Tests demonstrated sustained operation at pressures of 1000 bar, with capability to reach 1500bar. Durability tests showed no cavitation-deterioration over a 200-hour test cycle by means of spray imaging and hardware inspection.
De Ojeda, William [WM International Engineering, L↗
Flame dynamics and kinetic coupling of ammonia and dimethyl-ether in non-premixed cool and warm flames at elevated pressure
Developing advanced low-temperature combustion engines with ammonia-biofuel blends requires a comprehensive understanding of low-temperature flame dynamics and kinetic interactions between ammonia and oxygenated fuels at elevated pressures. This work aims to study the dynamics and kinetics of non-premixed Dimethyl Ether (DME)/Ammonia (NH 3 ) cool and warm flames, and their reignition to hot flames. A counterflow burner is employed to establish DME/NH 3 cool/warm flames at pressures up to 5 atm. The extinction limits of cool flame and the reignition limits of warm flame to hot flame are measured by varying NH 3 concentrations and compared to simulations to quantitatively examine the effects on DME/NH 3 flames. It is found that NH 3 inhibits low-temperature DME oxidation and results in lower cool flame extinction limits. Warm flames in the presence of NH 3 are observed for the first time, revealing a non-monotonic effect of NH 3 addition: a small amount of NH 3 presence enhances warm flame chemistry and promotes reignition to hot flames, while a high NH 3 concentration weakens the warm flame. This trend is further explained by 0-D PSR kinetic simulations and 1-D S-curve flame dynamic calculations. Three flame transition regimes between cool flames (CF), warm flames (WF), and hot flames (HF) by different levels of NH 3 additions at a specific strain rate are identified, namely WFHF reignition, WF-CF transition, and WF extinction. Reaction sensitivity analyses of OH at low temperatures show that NH3 inhibits DME oxidation through OH consumption via H-abstraction and the kinetic couplings of RO 2 /NH 2 , RO 2 /NO x , R/NO x , and O 2 QOOH/NO x further suppress the low-temperature branching. At intermediate-temperatures, NH 2 /NO x /HO 2 coupling promotes warm flames via the pathway NH 2 → H 2 NO → HNO → NO by converting O 2 → HO 2 → OH. At even higher NH₃ concentrations, radical termination reactions of NH 2 + NO/NO 2 and excessive OH consumption via H-abstraction inhibit the flame. The insights into the kinetic coupling between NH 3 and low-temperature chemistry at elevated pressure and its impact on the dynamics of cool-warm-hot flame transitions will contribute to advancing combustion technologies with reduced emissions and improved energy-efficiency.
42 ENGINEERING↗
Extraction of Oil From Camelina Seeds Using Liquefied Dimethyl Ether
With a changing climate and a push for net-zero carbon emissions, sustainable aviation fuel (SAF) is gaining interest worldwide. Due to its compatibility with current infrastructure and potential to reduce emissions by up to 94%, SAF has been identified as the best near-term opportunity to decrease carbon emissions in the aviation industry. SAF can be produced from various renewable feedstocks, with Camelina sativa (L.) seeds standing out due to their high oil content. Conventionally, the oil is extracted using hydrothermal liquefaction (HTL), which involves the pressurized heating of water and biomass up to 400°C, making it incredibly energy-intensive. Conversely, liquefied dimethyl ether (DME) extraction operates at room temperature and is capable of near 100% solvent recycling. In this work, we propose the use of DME extraction as a substitute for HTL, hypothesizing that it can overcome the challenges of current oil extraction methods while maintaining the same oil yields.
09 - BIOMASS FUELS↗
Analysis of Extracted Ingredients from Dairy Byproduct Using Dimethyl Ether
Whey permeate is a byproduct created in large quantities from the dairy industry with limited applications due to transportation and stability. Whey permeate is primarily comprised of water, carbohydrates, and minerals with minimal contribution of proteins. Various biomasses in food processing have utilized liquid dimethyl ether (DME) as a form of extraction for high-value ingredients and dewatering. DME is a growing interest in wastewater and biomass treatment due to it being a green solvent, ability to dissolve organic solvents, and miscibility with water. The current study is to determine if DME can effectively dewater whey permeate as well as recover components that can be further used in the food industry as a value-added ingredient. Analysis of the liquid extract and solid extract was evaluated with inductively coupled plasma-mass spectrometry (ICP-MS) and solid extracts were further characterized with the application of a scanning electron microscope (SEM).
09 - BIOMASS FUELS↗
Methanol mixing controlled combustion process enabled by methanol dehydration to dimethyl ether
This work demonstrates an initial proof-of-concept approach for operating a compression ignition off-road and marine relevant engine using neat methanol. The approach utilizes mixing controlled compression ignition (MCCI) of methanol that is enabled by a homogeneous charge compression ignition (HCCI) pre-burn of premixed dimethyl ether (DME). Although two fuels are used, this work explores and evaluates the opportunity and performance to generate the premixed fuel via. methanol catalytic dehydration over an alumina catalyst at engine relevant temperatures, pressures, and space velocities. Conversion purity and species output results from catalytic dehydration bench flow reactor studies were coupled with single cylinder experiments of the characterized output species for pre-burn HCCI performance. Subsequent initial methanol MCCI performance is also evaluated and compared relative to conventional diesel combustion. The detailed flow reactor results show that the catalytic dehydration conversion efficiency of methanol to DME is a function of system pressure, temperature, and space velocity. The engine results demonstrate that a 100% conversion of methanol to DME is not required for successful pre-burn HCCI, and the water formed during the dehydration process does not need to be removed to achieve the desired HCCI event from this pre-burn mixture. Subsequent methanol MCCI combustion results show that the level of methanol slip in the dehydration process affects the pre-burn HCCI phasing, low temperature heat release process, and magnitude of energy released, all of which can dictate the available window for direct injection of methanol for MCCI combustion.
Jatana, Gurneesh [ORNL] (ORCID:0000000288903225)↗
Methanol mixing−controlled compression ignition enabled via homogeneous charge compression ignition of dimethyl ether through catalytic decomposition of methanol
Methanol is a potentially attractive fuel for marine and off−road engines owing to its availability at bunkering and global distribution locations. Although methanol is well−distributed worldwide, its fuel chemistry and ignition properties make it poorly suited as a direct drop−in replacement for diesel fuel in compression−ignition engines. However, industrial processes are regularly used to convert methanol, via catalytic dehydration, to dimethyl ether (DME) over nonprecious metal catalysts. This chemical conversion can occur at relatively low pressures, temperatures, and catalyst space velocities, highlighting a potential opportunity to generate DME via onboard catalytic dehydration of methanol. DME’s fuel kinetic and ignition properties for compression ignition are much more favorable than those of methanol or even diesel fuel, but DME is more challenging than diesel fuel or methanol to pump, store, and deliver through conventional diesel fueling injection hardware. Thus, a potential opportunity exists to use the ignition and kinetic properties of DME, with the transportation and delivery advantages of methanol, in a methanol−fueled mixing−controlled compression−ignition engine. The present work explores performance, combustion behavior, and emissions reduction opportunities for methanol mixing−controlled combustion, enabled by a HCCI of DME that represents a small fraction of the total fuel energy that can be generated onboard via catalytic dehydration of methanol.
Splitter, Derek [ORNL] (ORCID:0000000174044047)↗
Lanthanide Sulfate Recovery by Synergistic Dimethyl Ether and Na 2 SO 4 Fractional Crystallization
Lanthanides (Lns) are important to many technologies including magnets used in high-efficiency traction motors and generators. While commonly occurring in the environment and industrial waste streams, Ln are generally present at low concentrations. This work demonstrates synergistic Ln recovery from an aqueous magnet leachate to single ppm concentrations using Na 2 SO 4 addition and subsequent dimethyl ether-driven fractional crystallization (DME-FC) treatment. It is found that combining DME-FC with low concentrations of Na 2 SO 4 (≈0.1 M) results in synergistic isolation of Lns while making use of Na 2 SO 4 , an excessive byproduct of hydrometallurgical metal production. Combined Na 2 SO 4 + DME reduces Ln metal ion (Pr, Nd, Sm, Gd, Dy, and Ho) solubilities by 700–27,000x with final concentrations ranging from 2 ppm to 200 ppm. Separately, Na 2 SO 4 0.1 M provides a 10–200x reduction and DME provides a 90–1,400x reduction in Ln solubilities. Final Ln concentrations of the combined process are 99.8% lower than what is achieved with each individual process.
dimethyl ether↗
Study on ammonia and dimethyl ether oxidation and kinetic interaction up to 100 atm
NH 3 and DME dual fuel oxidation and kinetic coupling are experimentally studied by using a supercritical pressure jet-stirred reactor (SP-JSR) at 20 and 100 atm, over a temperature range of 500–900 K, and at fuel-lean and stoichiometric conditions with NH 3 to DME molar ratios of 4 and 0.62, respectively. An HP-Mech model for high-pressure NH3/DME oxidation is developed based on our previous studies and it shows generally better performance than other models in the literature on high-pressure oxidation experiments. Due to DME’s strong low-temperature reactivity, it dramatically enhances the oxidation of NH3 at low temperature. However, the effect of NH 3 on DME oxidation varies with temperature. At low temperatures, NH 3 inhibits low-temperature reactivity by consuming OH radicals. In addition, the NH 2 and NO x formation from NH 3 further suppresses the low-temperature DME reactivity by reducing alkylperoxyl and O 2 QOOH radicals via RO 2 + NH 2 = RO + H 2 NO, RO 2 + NO = RO + NO 2 and O 2 QOOH + NO = 2CH 2 O + HO 2 + NO 2 . At intermediate temperatures, due to enhanced kinetic coupling of NH 2 /NO x /HO 2 chemistry, DME oxidation is significantly promoted. It is found that there are two major NH 2 /NO x /HO 2 coupling pathways for OH radical production brought by NH 3 : (1) NH 2 + HO 2 = H 2 NO + OH and (2) NH 2 + NO 2 = H 2 NO + NO with NO + HO 2 = OH + NO 2 . Moreover, the resulting H 2 NO will further contribute to OH production via the H 2 NO/NO x /HONO coupling pathways: H 2 NO + NO 2 = HNO + HONO, HNO + NO 2 = HONO + NO, and HONO (+M) = OH + NO (+M). These new NH 2 /NO x /HO 2 and H 2 NO/NO x /HONO pathways play a critical role in promoting DME oxidation at intermediate temperatures. Novelty and Significance Statement: Blending NH 3 with DME can significantly enhance the reactivity of NH 3 and facilitate its practical application in advanced internal combustion engines. NH 3 /DME oxidation is studied in a novel supercritical pressure jet-stirred reactor up to 100 atm, a much higher pressure than previous studies. An interesting non-monotonic effect of NH3 addition on fuel oxidation has been found. Unique kinetic couplings of NH2/HO2/NOx and H2NO/NOx/HONO brough by NH3 and DME blending are identified to play important roles in radical generation and reactivity promotion. The valuable experimental data and key kinetics revealed in the current work can tremendously improve our understanding of NH 3 /DME oxidation via NO x /RO 2 and NH 2 / H 2 NO/HO 2 /NO x kinetic couplings at low to intermediate temperatures.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Multiscale characterization, modeling and simulation of packed bed reactor for direct conversion of syngas to dimethyl ether
A multiscale computational approach to examine direct DME synthesis in a packed bed reactor composed of Cu/ZnO/Al 2 O 3 and γ-Al 2 O 3 catalysts.
09 BIOMASS FUELS↗
Rate constants for the reaction of atomic chlorine with methanol and dimethyl ether from 200 to 500 K
Explore the source record for details and available documents.
Michael, J. V.↗
Optimized Structures and Proton Affinities of Fluorinated Dimethyl Ethers: An Ab Initio Study
Ab initio methods have been used to investigate the proton affinity and the geometry changes upon protonation for the molecules (CH3)2O, (CH2F)2O, (CHF2)2O, and (CF3)2O. Geometry optimizations were performed at the MP2/3-2 I G level, and the resulting geometries were used for single-point energy MP2/6-31G calculations. The proton affinity calculated for (CH3)2O was 7 Kjoule/mole from the experimental value, within the desired variance of +/- 8Kjoule/mole for G2 theory, suggesting that the methodology used in this study is adequate for energy difference considerations. For (CF3)20, the calculated proton affinity of 602 Kjoule/mole suggests that perfluorinated ether molecules do not act as Lewis bases under normal circumstances; e.g. degradation of commercial lubricants in tribological applications.
Orgel, Victoria B.↗