Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “density evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

The effects of pure density evolution on the brightness distribution of cosmological gamma-ray bursts

In this work, we explore the effects of burst rate density evolution on the observed brightness distribution of cosmological gamma-ray bursts. Although the brightness distribution of gamma-ray bursts observed by the BATSE experiment has been shown to be consistent with a nonevolving source population observed to redshifts of order unity, evolution of some form is likely to be present in the gamma-ray bursts. Additionally, nonevolving models place significant constraints on the range of observed burst luminosities, which are relaxed if evolution of the burst population is present. In this paper, three analytic forms of density evolution are examined. In general, forms of evolution with densities that increase monotonically with redshift require that the BATSE data correspond to bursts at larger redshifts, or to incorporate a wider range of burst luminosities, or both. Independent estimates of the maximum observed redshift in the BATSE data and/or the range of luminosity from which a large fraction of the observed bursts are drawn therefore allow for constraints to be placed on the amount of evolution that may be present in the burst population. Specifically, if recent measurements obtained from analysis of the BATSE duration distribution of the actual limiting redshift in the BATSE data at z(sub lim) = 2 are correct, the BATSE N(P) distribution in a Lambda = 0 universe is inconsistent at a level of approximately 3 alpha with nonevolving gamma-ray bursts and some form of evolution in the population is required. The sense of this required source evolution is to provide a higher density, larger luminosities, or both with increasing redshift.

Horack, J. M.↗
NASA NTRS1981

Quasar number density evolution

A simple model of quasar number density evolution is presented based on the occurrence of quasar-like radio galaxies (i.e., strong optical emission lines and type 2 radio morphology) exclusively in regions of low galaxy and intergalactic medium (IGM) density. This suggests a limit for the IGM density of 10 to the -4th (+ or - 1) per cu cm below which quasars are allowed to form and above which they are not allowed. In the recent past (z not greater than 1), the inferred quasar environments are the outskirts of clusters and near the centers of groups of galaxies. However, models of rich cluster evolution consistent with current X-ray observations predict gas densities of less than 10 to the -4th per cu cm in cluster cores in the more distant past (z between 1 and 5). This suggests that quasars were allowed to form in the cores of rich clusters at those epochs, which explains both the rich absorption spectra of high-redshift quasars and the absence of clusters surrounding quasars at lower redshift.

Stocke, J. T.↗
NASA NTRS1992

The density evolution of IRAS galaxies

A maximum likelihood test for density evolution is applied to a full-sky redshift survey of 5297 galaxies selected from the IRAS data base and flux-limited at 1.2 Jy. No evidence for evolution is found. Attention is given to important systematic errors which decrease the certainty with which evolution can be measured, namely, limited knowledge of the cosmological model, the unknown intrinsic spectral energy distribution of IRAS galaxies from 16 to 140 microns, the effect of density fluctuations, a Malmquist-like bias arising from flux errors in the IRAS Point Source Catalog, and possible incompleteness of the sample at high redshifts and low Galactic latitudes. It is shown that the Malmquist bias could result in a significant overestimation of the evolution rate, especially if the catalog has a flux limit near the completion limit of the Point Source Catalog.

Fisher, Karl B.↗
DOE OSTI2025

Comparison of laser-produced plasma spatio-temporal electron density evolution measured using interferometry with simulation results

Due to the difficulties associated with experimental measurements of laser-produced plasma (LPP) properties during the earliest stages of plasma evolution, radiation hydrodynamic codes are often used. However, although these codes have been extensively validated in the higher intensity regimes, validation at low to moderate intensities has been limited. In this study, the spatio-temporal electron density evolution in an LPP generated at moderate laser intensities and at various laser wavelengths was validated against the FLASH code for times up to 20 ns. The LPP was generated by focusing the fundamental and various harmonics radiation (1064, 532, and 266 nm) from a 6 ns full width half maximum Nd:YAG laser, at a laser intensity of 10 GW cm -2 , onto a copper target. The spatio-temporal density evolution of the expanding plasma was analyzed using Nomarski interferometry. Experimental measurements were found to be consistent with FLASH simulations, and the dependence of electron densities on wavelength was found to be in agreement with analytical models, varying as n e ∝ λ -0.7 . However, slight differences were noted in the widths and shape functions of the experimental and simulated electron density profiles.

2D fast imaging↗
DOE OSTI2026

Time-resolved interferometric measurements of plasma density evolution in laser-driven capacitor-coil targets

Laser-driven capacitor-coil targets provide a compact platform for generating strong magnetic fields and are widely used in magnetized high-energy-density (HED) plasma experiments. In addition to magnetic-field generation, these targets also produce plasma in the coil region, which can influence the subject physical processes and interact with secondary targets or external plasmas in their applications. However, direct, time-resolved measurements of the plasma density surrounding the coil remain limited. Here, we report interferometric measurements of the plasma density evolution in laser-driven capacitor-coil targets irradiated by the University of Osaka LFEX laser. Two-dimensional electron density maps reveal two distinct plasma sources loading the coil region: plasma generated in the coil itself and plasma produced by laser ablation of the target plates. These results provide quantitative information on plasma loading and evolution in capacitor-coil targets and are directly relevant to the design and modeling of magnetized HED plasma experiments.

Zhang, Yang [Princeton University, NJ (United Stat↗
DOE OSTI2025

Rules for the crystallite size and dislocation density evolution in phases during α-ω transformation in Zr under high-pressure and severe plastic flow

The first in-situ X-ray diffraction (XRD) study of the evolution of the crystallite size and dislocation density in phases during plastic strain-induced phase transformation (PT) is performed utilizing α-ω PT in strongly pre-deformed commercially pure Zr as an important example. Rough diamond anvils (rough-DA) are introduced to intensify all occurring processes during heterogeneous compression of Zr in a diamond anvil cell (DAC). The main rule is found that during α-ω PT the crystallite size and dislocation density in ω-Zr depend solely on the volume fraction of ω-Zr and are independent of pressure, plastic strain tensor, its path, and initial nanostructure. Crystallite size in ω-Zr increases from 10 to 60 nm during the PT, while dislocation density reduces from 1.83×10 15 /m 2 to 0.6×10 15 /m 2 . Rough-DA produce a steady nanostructure in α-Zr before PT with smaller crystallite size and larger dislocation density than smooth-DA, leading to a reduction of the minimum pressure for α-ω PT to a record value 0.67 GPa, 9 times smaller than under hydrostatic loading and 5.1 times lower than the phase equilibrium pressure. In addition to strain, the kinetics of strain-induced PT unexpectedly depends on time. Also, strain-controlled part of kinetics is zero order, in contrast to the first-order kinetics with smooth-DA. The obtained results open a new window for understanding the mutual effects of nanostructure evolution and PT during severe plastic flow in various technological and natural processes. In conclusion, they may bring up economic strategies of producing nanocomposites and single-phase nanostructured materials with optimal properties.

Crystalline size↗
NASA NTRS1993

Evolution of the Blue and Far-Infrared Galaxy Luminosity Functions

The space density of blue-selected galaxies at moderate redshifts is determined here directly by deriving the luminosity function. Evidence is found for density evolution for moderate luminosity galaxies at a rate of (1+z) exp delta, with a best fit of delta + 4 +/- 2, between the current epoch and Z greater than about 0.1. At M(b) less than -22 evidence is found for about 0.5-1.5 mag of luminosity evolution in addition to the density evolution, corresponding to an evolutionary rate of about (1+z) exp gamma, with gamma = 0.5-2.5, but a redshift of about 0.4. Assuming a steeper faint end slope of alpha = -1.3 similar to that observed in the Virgo cluster, could explain the data with a luminosity evolution rate of gamma = 1-2, without need for any density evolution. Acceptable fits are found by comparing composite density and luminosity evolution models to faint IRAS 60 micron source counts, implying that the blue and far-IR evolutionary rates may be similar.

Lonsdale, Carol J.↗
NASA NTRS1988

Models of the quasar population. I - A new luminosity function

A new functional form for the quasar luminosity function is tested using recent observational results for both bright and faint quasar count and redshift distributions. The form is of a fairly general type based on three free parameters and allows for quasars to undergo a combination of luminosity evolution and luminosity-dependent density evolution; an advantage to this approach is that it does not constrain quasars to follow a single type of evolution. Models of pure luminosity evolution or luminosity-dependent density evolution can be constructed, but the apparent magnitude distribution of observed quasars is best fitted by a combination model. The combination model also gives the correct redshift distribution for quasars with redshifts less than three and predicts that quasars brighter than B = 22 provide a 2-10 keV X-ray flux that is equal to 32 percent of the observed X-ray background. However, the model is flawed in that it predicts more high-redshift quasars than are observed.

Heisler, Julia↗
NASA NTRS1993

Plasma expansion and evolution of density perturbations in the polar wind - Comparison of semikinetic and transport models

Comparisons are made between transport and semikinetic models in a study of the time evolution of plasma density perturbations in the polar wind. The situations modeled include plasma expansion into a low-density region and time evolution of localized density enhancements and cavities. The results show that the semikinetic model generally yields smoother profiles in density, drift velocity, and ion temperature than the transport model, principally because of ion velocity dispersion. While shocks frequently develop in the results of the transport model, they do not occur in the semikinetic results. In addition, in the semikinetic results, two ion streams, or double-humped distributions, frequently develop. In the transport model results the bulk parameters, at a given time, often have a one-to-one correspondence in the locations of their local minima or maxima. This is a consequence of the coupling of the fluid equations. There is, however, no such relationship among the moments produced by the semikinetic model where the local moment maxima and minima are often shifted in altitude. In general, incorporation of enhanced heat fluxes in the transport model leads to somewhat improved agreement with the semikinetic results.

Ho, C. W.↗
DOE OSTI2025

Rapid synthesis of phase-engineered tungsten carbide electrocatalysts via flash joule heating for high-current-density hydrogen evolution

Fabricating durable and high-performance electrocatalysts operating at high current densities for industrial acidic hydrogen evolution remains a daunting challenge. Tailoring the phase composition of electrocatalysts is a promising strategy to harness synergistic effects and improve charge transfer, thereby optimizing their performance. Here, this work presents a fast, green method based on flash joule heating (FJH) to synthesize phase-engineered tungsten carbide electrocatalysts for the acidic hydrogen evolution reaction (HER) at high current densities. Tungsten carbide electrodes with varying FJH treatment durations (3, 10, 30, and 60 s) are fabricated to fine-tune the mixture of tungsten monocarbide (WC) and tungsten semicarbide (W 2 C) phases. Results show that samples with a 30-s treatment (TC-3) exhibit an optimal balance between these phases, leading to a low overpotential of 180.97 and 387 mV at current densities of 10 mA/cm 2 and 4 A/cm 2 , respectively. TC-3 exhibits significantly lower charge transfer resistance compared to the other electrocatalysts, which can be attributed to its optimal phase ratio. Notably, the TC-3 electrocatalyst remains stable for over 9 days at 4 A/cm 2 due to their controlled phases and excellent corrosion-resistant properties. This work highlights a new method to fabricate cost-effective, high-performance tungsten carbide electrocatalysts with well-controlled phase compositions.

Acidic hydrogen evolution reaction↗
NASA NTRS1982

Do quasars have cosmologically long lifetimes

An alternative explanation to gravitational lensing is examined, by which problems inherent in space density evolution are avoided without invoking gravitational effects. Apparent and unreal density evolution follows as an immediate consequence, if the quasar lifetimes that are the only free parameter in the model proposed are of the order of three billion years. If such lifetimes are the case, while quasars may occur less frequently than has been thought, the local density of quasars may have been grossly underestimated.

Chanan, G. A.↗
DOE OSTI2024

A FFT-based mesoscale continuum dislocation mechanics with defect energy: Applications to composites and polycrystals

A crystal plasticity elastoviscoplastic FFT (fast Fourier transform) formulation with a mesoscale continuum field dislocation mechanics model is presented, which incorporates a defect energy density that depends on GND densities and an associated material length scale. This allows to thermodynamically derive internal length scale dependent intra-crystalline backstress and Peach–Koehler force acting on GND densities. The model considers GND density evolution through a filtered numerical spectral approach, which is coupled with stress equilibrium through the elastoviscoplastic FFT algorithm. The discrete Fourier transform (DFT) method together with finite difference (FD) schemes is applied to solve both the backstress tensor and the Fourier–Green operator. Numerical results are first reported for two-phase laminate composites with plastic single crystal channels and elastic precipitates for shear loadings. Channel size effects are simulated and analyzed on the overall and local hardening behaviors during monotonous loadings. In addition, the evolutions of GND densities and the role of their associated backstress on size effects are examined during reversible shear loading. In a second part, the role of the defect energy internal length scale on polycrystal’s hardening during tension–compression is discussed. The results are compared to those obtained using FFT-based continuum field dislocation mechanics without defect energy.

36 MATERIALS SCIENCE↗
NASA NTRS1989

Statistical and physical evolution of QSO's

The relationship between the physical evolution of discrete extragalactic sources, the statistical evolution of the observed population of sources, and the cosmological model is discussed. Three simple forms of statistical evolution: pure luminosity evolution (PLE), pure density evolution (PDE), and generalized luminosity evolution (GLE), are considered in detail together with what these forms imply about the physical evolution of individual sources. Two methods are used to analyze the statistical evolution of the observed distribution of QSO's (quasars) from combined flux limited samples. It is shown that both PLE and PDE are inconsistent with the data over the redshift range 0 less than z less than 2.2, and that a more complicated form of evolution such as GLE is required, independent of the cosmological model. This result is important for physical models of AGN, and in particular, for the accretion disk model which recent results show may be inconsistent with PLE.

Caditz, David↗
NASA NTRS1990

Statistical and physical evolution of quasi-stellar objects

The relationship between the physical evolution of discrete extragalactic sources, the statistical evolution of the observed population of sources, and the cosmological model are discussed. Three simple forms of statistical evolution - pure luminosity evolution (PLE), pure density evolution (PDE), and generalized luminosity evolution (GLE) are considered in detail together with what these forms imply about the physical evolution of individual sources. Two methods are used to analyze the statistical evolution of the observed distribution of QSOs from combined flux-limited samples. It is shown that both PLE and PDE are inconsistent with the data over the redshift range between 0.2 and 2.2 and that a more complicated form of evolution such as GLE is required, independent of the cosmological model. This result is important for physical models of AGN, and in particular, for the accretion disk model which recent results show may be inconsistent with PLE.

Caditz, David↗
NASA NTRS1998

AGN Populations, Evolution, and AXAF

A successful empirical description of quasar evolution - 'luminosity' vs. 'density' evolution - is at hand [see e.g. next talk by Hasinger], but the causes of this evolution are currently merely speculation. To develop a physical understanding of the cause of AGN evolution is the next challenge in AGN studies. To create this model -requires an initial mass function for quasar black holes and a the time dependence of their fuelling rate. We review some observational and theoretical paths by which these basic inputs can be constrained; and consider how AXAF and other future missions will make progress.

Elvis, Martin↗
NASA NTRS1980

Cosmological tests of the Hoyle-Narlikar conformal gravity

For the first time the Hoyle-Narlikar theory with creation of matter and a variable gravitational constant G, is subjected to the following cosmological tests: (1) the magnitude versus z relation, (2) the N(m) versus m relation for quasars, (3) the metric angular diameters versus z relation, (4) the isophotal angles versus z relation, (5) the log N-log S radio source count, and finally (6) the 3 K radiation. It is shown that the theory passes all these tests just as well as the standard cosmology, with the additional advantage that the geometry of the universe is uniquely determined, with a curvature parameter equal to zero. It is also interesting to note that the variability of G affects the log N-log S curve in a way similar to the density evolution introduced in standard cosmologies. The agreement with the data is therefore achieved without recourse to an ad hoc density evolution.

Canuto, V. M.↗