Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “defective half-Heuslers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A valence balanced rule for discovery of 18-electron half-Heuslers with defects

Using first-principles DFT we systematically investigate the thermodynamic stability and off-stoichiometry in 108 nominal 19-electron half-Heusler (hH) compounds. We demonstrate unambiguously that considering a cation deficiency towards the off-stoichiometric valence balanced, VEC = 18 composition is necessary for explaining the stability of all previously reported nominal VEC = 19 compounds. This is understandable in terms of an energy benefit from valence balance considering the valence of each atom using Zintl chemistry that offsets the energy penalty of forming defects in nearly all cases. Thus, we propose a valence balanced rule to understand the ground state stability of half-Heuslers irrespective of stoichiometry and nominal electron count (8, 18 or 19). Using this generalized rule we (a) predict 16 previously unreported nominal 19-electron XYZ half-Heuslers and (b) rationalize the reports of giant off-stoichiometries in compounds such as Ti (1–x) NiSb which has been known for over 50 years. Of the 16 new compounds predicted here, Ti (1–x) PtSb was synthesized and the half-Heusler phase confirmed through X-ray studies. Here, the flexibility in stoichiometry of the half-Heusler systems to attain a stable valence balanced composition by accommodating large defect concentrations opens up multiple dimensions for discovery of multi-component defective half-Heuslers based on intrinsic and extrinsic defects which compensate for the nominally non-18-electron count of the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Native defects and impurity band behavior in half-Heusler thermoelectric NbFeSb

To investigate the electronic behavior and magnetic properties of NbFeSb, we have performed 93 Nb NMR, specific heat and magnetic measurements on NbFeSb samples heat treated at high temperatures. In this work, magnetic measurements combined with an observed Schottky anomaly and changes in the NMR line width indicate the presence of a 0.2% concentrated native magnetic defect in stoichiometric NbFeSb samples. The origin of these native defects is believed to be due to Fe antisites on Nb sites. In addition, NMR shift and spin–lattice relaxation results below 200 K reveal a Korringa-like response indicating heavily-doped p-type behavior due to native defects. Above 280 K, this converts to an activated behavior, indicating the presence of an impurity band, empty at low temperatures, which is located around 0.03 eV above the valence band maximum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Making sense of vacancy correlations with single-crystal diffuse scattering data

Local ordering of atoms within a crystalline structure is increasingly recognized as essential to understanding the properties of a variety of interesting materials. This is shown by the success of pair distribution function (PDF) analysis of scattering data from powder samples to investigate departures from perfectly crystalline order (Billinge & Kanatzidis, 2004; Egami & Billinge, 2012). Diffuse scattering from single crystals can also be a powerful probe of local order, potentially providing key information that would be difficult to obtain from PDF methods; however, difficulties in both measurement and interpretation of data have too often restricted their use by a larger community. In this issue of IUCrJ, Rothet al.(2020) demonstrate how simple concepts can be applied to better understand single-crystal diffuse scattering from half-Heusler systems.

36 MATERIALS SCIENCE↗

Half-Heusler alloys as emerging high power density thermoelectric cooling materials

Abstract To achieve optimal thermoelectric performance, it is crucial to manipulate the scattering processes within materials to decouple the transport of phonons and electrons. In half-Heusler (hH) compounds, selective defect reduction can significantly improve performance due to the weak electron-acoustic phonon interaction. This study utilized Sb-pressure controlled annealing process to modulate the microstructure and point defects of Nb 0.55 Ta 0.40 Ti 0.05 FeSb compound, resulting in a 100% increase in carrier mobility and a maximum power factor of 78 µW cm −1 K −2 , approaching the theoretical prediction for NbFeSb single crystal. This approach yielded the highest average zT of ~0.86 among hH in the temperature range of 300-873 K. The use of this material led to a 210% enhancement in cooling power density compared to Bi 2 Te 3 -based devices and a conversion efficiency of 12%. These results demonstrate a promising strategy for optimizing hH materials for near-room-temperature thermoelectric applications.

36 MATERIALS SCIENCE↗

Temperature Dependent n-Type Self Doping in Nominally 19-Electron Half-Heusler Thermoelectric Materials

The discovery of a semiconducting ground state X y YZ (y = 0.8 or 0.75) in nominally 19-electron half-Heusler materials warrants a closer look at their apparently metallic properties that often make them good thermoelectric (TE) materials. Here, by systematically investigating the temperature dependence of off-stoichiometry (x) in V 0.8+x CoSb, Nb 0.8+x CoSb, and Ti 0.75+x NiSb it is found that x invariably increases with increasing temperature, leading to an n-type self-doping behavior. In addition, there is also a large phase width (range of x) associated with each phase that is temperature dependent. Thus, unlike in typical 18-electron half-Heuslers (e,g, TiNiSn), the temperature dependence of vacancy and carrier concentration (n) in nominally 19-electron half-Heuslers links its transport properties to synthesis conditions. The temperature dependence of x and n are understood using density functional theory based defect energies (E d ) and phase diagrams. E d are calculated for 21 systems which can be used in predicting solubility in this family of compounds. Using this simple strategy, suitable composition and temperature synthesis conditions are devised for obtaining an optimized n to engineer TE properties in phase-pure V 0.8+x CoSb, and the previously unexplored Ta 0.8+x CoSb.

19-electron half-Heuslers↗

Semi-adsorption-controlled growth window for half-Heusler FeVSb epitaxial films

The electronic, magnetic, thermoelectric, and topological properties of Heusler compounds (composition XYZ or X 2 YZ) are highly sensitive to stoichiometry and defects. Here we establish the existence and experimentally map the bounds of a semi-adsorption-controlled growth window for semiconducting half-Heusler FeVSb films, grown by molecular beam epitaxy (MBE). We show that due to the high volatility of Sb, the Sb stoichiometry is self-limiting for a finite range of growth temperatures and Sb fluxes, similar to the growth of III-V semiconductors such as GaSb and GaAs. Films grown within this window are nearly structurally indistinguishable by x-ray diffraction (XRD) and reflection high energy electron diffraction (RHEED). Here, the highest electron mobility and lowest background carrier density are obtained towards the Sb-rich bound of the window, suggesting that Sb vacancies may be a common defect. Similar semi-adsorption-controlled bounds are expected for other ternary intermetallics that contain a volatile species Z = {Sb, As, Bi}, e.g., CoTiSb, LuPtSb, GdPtBi, and NiMnSb. However, outstanding challenges remain in controlling the remaining Fe/V (X/Y) transition metal stoichiometry.

36 MATERIALS SCIENCE↗

Revealing the Intrinsic Electronic Structure of 3D Half-Heusler Thermoelectric Materials by Angle-Resolved Photoemission Spectroscopy

Accurate determination of the intrinsic electronic structure of thermoelectric materials is a prerequisite for utilizing an electronic band engineering strategy to improve their thermoelectric performance. Herein, with high-resolution angle-resolved photoemission spectroscopy (ARPES), the intrinsic electronic structure of the 3D half-Heusler thermoelectric material ZrNiSn is revealed. An unexpectedly large intrinsic bandgap is directly observed by ARPES and is further confirmed by electrical and optical measurements and firstprinciples calculations. Moreover, a large anisotropic conduction band with an anisotropic factor of 6 is identified by ARPES and attributed to be one of the most important reasons leading to the high thermoelectric performance of ZrNiSn. These successful findings rely on the grown high-quality single crystals, which have fewer Ni interstitial defects and negligible in-gap states on the electronic structure. This work demonstrates a realistic paradigm to investigate the electronic structure of 3D solid materials by using ARPES and provides new insights into the intrinsic electronic structure of the half-Heusler system benefiting further optimization of thermoelectric performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Thermoelectric Performance in 18-Electron Nb 0.8 CoSb Half-Heusler Compound with Intrinsic Nb Vacancies

Typical 18-electron half-Heusler compounds, ZrNiSn and NbFeSb, are identified as promising high-temperature thermoelectric materials. NbCoSb with nominal 19 valence electrons, which is supposed to be metallic, is recently reported to also exhibit thermoelectric properties of a heavily doped n-type semiconductor. Here for the first time, it is experimentally demonstrated that the nominal 19-electron NbCoSb is actually the composite of 18-electron Nb 0.8 +δCoSb (0 ≤ δ < 0.05) and impurity phases. Single-phase Nb 0.8δ +CoSb with intrinsic Nb vacancies, following the 18-electron rule, possesses improved thermoelectric performance, and the slight change in the content of Nb vacancies has a profound effect on the thermoelectric properties. The carrier concentration can be controlled by varying the Nb deficiency, and the optimization of the thermoelectric properties can be realized within the narrow pure phase region. Benefiting from the elimination of impurity phases and the optimization of carrier concentration, thermoelectric performance is remarkably enhanced by ≈100% and a maximum zT of 0.9 is achieved in Nb 0.83 CoSb at 1123 K. Here, this work expands the family of half-Heusler thermoelectric materials and opens a new avenue for searching for nominal 19-electron half-Heusler compounds with intrinsic vacancies as promising thermoelectric materials.

36 MATERIALS SCIENCE↗

Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance

Discovery of thermoelectric materials has long been realized by the Edisonian trial and error approach. However, recent progress in theoretical calculations, including the ability to predict structures of unknown phases along with their thermodynamic stability and functional properties, has enabled the so-called inverse design approach. Compared to the traditional materials discovery, the inverse design approach has the potential to substantially reduce the experimental efforts needed to identify promising compounds with target functionalities. By adopting this approach, here we have discovered several unreported half-Heusler compounds. Among them, the p-type TaFeSb-based half-Heusler demonstrates a record high ZT of ~1.52 at 973 K. Additionally, an ultrahigh average ZT of ~0.93 between 300 and 973 K is achieved. Such an extraordinary thermoelectric performance is further verified by the heat-to-electricity conversion efficiency measurement and a high efficiency of ~11.4% is obtained. Our work demonstrates that the TaFeSb-based half-Heuslers are highly promising for thermoelectric power generation.

36 MATERIALS SCIENCE↗

NanoStructured bulk thermoelectric generator for efficient power harvesting for self-powered sensor network

The goal of the Nuclear Energy Enabling Technology Research Project is to develop efficient and reliable thermoelectric (TE) generators for self-powered wireless sensor nodes (WSNs) for nuclear applications. The power harvesting technology has crosscutting significance to all United States Department of Energy Office of Nuclear Energy research and development programs, as it will enable self-powered WSNs in multiple nuclear reactor designs and spent fuel storage facilities using thermal energy available in a nuclear power plant or spent fuel storage facility. This project addresses an important technology gap that exists in truly realizing WSNs due to the need for cables to connect to external power supplies and develop TE power harvesting devices to deliver sufficient power to drive the WSNs. The outcomes of the project will lead to significant advancement in sensors and instrumentation technology, reducing cost, improving monitoring reliability, and therefore enhancing safety. The self-powered WSNs could support the long-term safe and economical operation of all reactor designs and fuel cycle concepts, as well as spent fuel storage and many other nuclear science and engineering applications. The research is based on recent breakthroughs in high-performance nanostructured bulk (nanobulk) half-Heusler and bismuth telluride thermoelectric materials that enable high-efficiency and high-power-density direct heat-to-electricity conversion over a wide temperature range. The nanobulk TE materials that the research team has already developed yield up to a 50% increase in the TE figure of merit, ZT, compared with state-of-the-art bulk counterparts. In addition to increased efficiency, the nanostructured materials are of potentially enhanced radiation tolerance due to the increased interface densities at the nanoscale grain boundaries that serves as efficient sinks to annihilate radiation-induced, freely-migrating structural defects. This report summarizes major technical results the team achieved in this three-year project, with a focus on the results obtained in the third year of the project. The report includes results on thermoelectric materials fabrication and optimization, irradiation effect on thermoelectric materials performance, thermoelectric device simulation, fabrication and testing, wireless sensor node system simulation, and the demonstration of a wireless sensor node powered by thermoelectric generators.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Proton irradiation effect on thermoelectric properties of nanostructured n-type half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01

Here, thermoelectric properties of nanostructured half-Heusler Hf 0.25 Zr 0.75 NiSn 0.99 Sb 0.01 were characterized before and after 2.5 MeV proton irradiation. A unique high-sensitivity scanning thermal microprobe was used to simultaneously map the irradiation effect on thermal conductivity and Seebeck coefficient with spatial resolution less than 2 μm. The thermal conductivity profile along the depth from the irradiated surface reflects excellent agreement with the irradiation-induced damage profile from simulation. The Seebeck coefficient was unaffected while both electrical and thermal conductivities decreased by 24%, resulting in no change in thermoelectric figure of merit ZT. Reductions in thermal and electrical conductivities are attributed to irradiation-induced defects that act as scattering sources for phonons and charge carriers.

36 MATERIALS SCIENCE↗

Physical Properties of Half-Heusler Antiferromagnet MnPtSn Single Crystal

Herein we report the growth of ternary half-Heusler MnPtSn single crystals and detailed study on its structural and physical properties. MnPtSn single crystal has a larger lattice parameter than that in polycrystal and it exhibits antiferromagnetism with transition temperature T N at about 215 K, distinctly different from the ferromagnetism of MnPtSn polycrystal. Hall resistivity measurement indicates that the dominant carriers are hole-type and the nearly temperature-independent carrier concentration reaches about 2.86 &#x00d7; 10 22 cm –3 at 5 K. Moreover, the carrier mobility is also rather low (4.7 cm 2 ·V –1 s –1 at 5 K). The above results strongly suggest that the significant Mn/Sn anti-site defects, i.e., the content of Mn in MnPtSn single crystal, play a vital role on structural, magnetic and transport properties

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Processing and Thermoelectric Properties of TiNiSn Materials: A Review

The half-Heusler alloy TiNiSn is a promising material for high-temperature thermoelectric applications due to its good thermal stability and semiconductor-like electrical properties. Numerous synthesis techniques have been utilized to make TiNiSn, but a comparative study on its thermoelectric properties with respect to processing parameters has not been reported. Based on published experimental data, primary melting methods, such as arc melting or induction levitation melting, do not have a noticeable effect on the final thermoelectric properties, although choice of densification technique and annealing parameters correlate with each thermoelectric property. Thermal conductivity (2.47-6.08 W/m K), governed by lattice scattering effects, was maximized with high density from the spark plasma sintering (SPS) technique as well with low inclusions of metallic impurities and interstitial Ni defects from low-temperature, non-densified processes. Electrical resistivity (4.75-30 µΩ m), inversely related to thermal conductivity, is minimized when density is maximized and chemical defects are favorable from using SPS. All reported TiNiSn alloys contain intermetallic impurities, imparting a global trend of lowered electrical resistivity. Seebeck coefficient (− 273.20 to − 50.71 µV/K), proportional to electrical resistivity, is maximized when charge carrier concentration is minimized by eliminating phase impurities and Ni defects. Porosity has been observed to scatter low-energy electrons, which can increase Seebeck coefficient and electrical resistivity, although no statistical significance is found. An ideal TiNiSn alloy should have intermediate values of all interconnected thermoelectric properties to maximize ZT. Future research work should strive to include quantitative phase analysis to better characterize the contributions of Ni defects and impurity phases toward thermoelectric properties.

36 MATERIALS SCIENCE↗

Engineering the Thermoelectric Transport in Half-Heusler Materials through a Bottom-Up Nanostructure Synthesis

Half-Heusler (HH) alloys are among the best promising thermoelectric (TE) materials applicable for the middle-to-high temperature power generation. Despite of the large thermoelectric power factor and decent figure-of-merit ZT (≈1), their broad applications and enhancement on TE performance are limited by the high intrinsic lattice thermal conductivity (κ L ) due to insufficiencies of phonon scattering mechanisms, and the fewer powerful strategies associated with the microstructural engineering for HH materials. This study reports a bottom-up nanostructure synthesis approach for these HH materials based on the displacement reaction between metal chlorides/bromides and magnesium (or lithium), followed by vacuum-assisted spark plasma sintering process. The samples are featured with dense dislocation arrays at the grain boundaries, leading to a minimum κ L of ≈1 W m -1 K -1 at 900 K and one of the highest ZT (≈1) and predicted η (≈11%) for n-type Hf 0.25 Zr 0.75 NiSn 0.97 Sb 0.03 . Further manipulation on the dislocation defects at the grain boundaries of p-type Nb 0.8 Ti 0.2 FeSb leads to enhanced maximum power factor of 47 × 10 -4 W m -1 K -2 and the predicted η of ≈7.5%. Moreover, vanadium substitution in FeNb 0.56 V 0.24 Ti 0.2 Sb significantly promotes the η to ≈11%. This strategy can be extended to a broad range of advanced alloys and compounds for improved properties.

36 MATERIALS SCIENCE↗

Multi-scale study of the deformation mechanisms of thermoelectric p-type half-Heusler Hf 0.44 Zr 0.44 Ti 0.12 CoSb 0.8 Sn 0.2

Increasing the figure of merit ZT of thermoelectric (TE) alloys is a challenge that is currently attempted through various metallurgy methods, including nanostructuring and dislocation engineering. Microstructures with such a level of complexity raise questions about the mechanical reliability of these new materials. Indeed, despite the values of hardness and elastic modulus known for the clear majority of TE materials, the data on deformation mechanisms are still rare. Focusing on the nanostructured p-type half-Heusler Hf 0.44 Zr 0.44 Ti 0.12 CoSb 0.8 Sn 0.2 , our multi-scale study aims to analyze the deformation mechanisms. Experiments conducted at macro-, meso-, and micro-scale are designed to trigger and assess plasticity mechanisms. Compression testing on bulk samples subject to a confining pressure environment and temperature leads to an exclusive brittle failure. The mixed-mode failure mechanisms involve switching between intra- and inter-granular crack propagation, depending on the grain size met by the crack tip. Cube-corner nanoindentation at meso-scale generates cracks and enables fracture toughness estimation, while TEM analysis of the crack tip area confirms no dislocation activity and 3D-Electron Back Scattered Diffraction technique confirms the mixed crack propagation behavior. At micro-scale, micro-pillar compression stress-strain curves and failure mechanisms are comparable with bulk samples testing analysis. These results can be used to provide design guidelines for more crack-resistant TE alloys.

Thermoelectricity↗