Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data movement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Data Movement in Data-Intensive High Performance Computing.

The cost of executing a floating point operation has been decreasing for decades at a much higher rate than that of moving data. Bandwidth and latency, two key metrics that determine the cost of moving data, have degraded significantly relative to processor cycle time and execution rate. Despite the limitation of sub-micron processor technology and the end of Dennard scaling, this trend will continue in the short-term making data movement a performance-limiting factor and an energy/power efficiency concern. Even more so in the context of large-scale and data-intensive systems and workloads. This chapter gives an overview of the aspects of moving data across a system, from the storage system to the computing system down to the node and processor level, with case study and contributions from researchers at the San Diego Supercomputer Center, the Oak Ridge National Laboratory, the Pacific Northwest National Laboratory, and the University of Delaware.

Data Movement↗

A novel approach for estimating densities of secretive species from road-survey and spatial-movement data

Accurate estimates of population density are a critical component of effective wildlife conservation and management. However, many snake species are so secretive that their density cannot be determined using traditional methods such as capture–mark–recapture. Thus, the status of most terrestrial snake populations remains completely unknown. We developed a novel simulation-based technique for estimating density of secretive snakes that combined behavioural observations of snake road-crossing behaviour (crossing speed), effort-corrected road-survey data, and simulations of spatial movement patterns derived from radio-telemetry, without relying on mark–recapture. Here, we used radio-telemetry data to parameterise individual-based movement models that estimate the frequency with which individual snakes cross roads and used information on survey vehicle speed and snake crossing speed to determine the probability of detecting a snake, given that it crosses the road transect during a survey. Snake encounter frequencies during systematic road surveys were then interpreted in light of detection probabilities and simulation model results to estimate snake densities and to assess various factors likely to affect abundance estimates. We demonstrated the broad applicability of this approach through a case study of the imperiled southern hognose snake (Heterodon simus) in the North Carolina (USA) Sandhills. We estimated that H. simus occurs at average densities of 0.17 ha –1 in the North Carolina Sandhills and explored the sensitivity of this estimate to assumptions and variation in model parameters. Our novel method allowed us to generate the first abundance estimates for H. simus. We found that H. simus exists at low densities relative to congeners and other mid-sized snake species, raising concern that this species may not only have declined in geographic range, but may also occur at low densities or be declining in their strongholds, such as the North Carolina Sandhills. We present a framework for estimating density of species that have traditionally been considered too secretive to study at the population level. This method will greatly enhance our ability to study and manage a wide variety of snake species and could be applied to other secretive wildlife species that are most frequently encountered during road surveys.

59 BASIC BIOLOGICAL SCIENCES↗

HDF5 As a Vehicle for in Transit Data Movement

For in transit processing, one of the fundamental challenges is the efficient movement of data from producers to consumers. Exploiting the flexibility offered by the SENSEI generic in situ framework, we have developed a number of different in transit data transport mechanisms. In this work, we focus on the transport mechanism that leverages the HDF5 parallel I/O library, and investigate the performance characteristics of this transport mechanism. For in transit use cases at scale on HPC platforms, one might expect that an in transit data transport mechanism that uses faster layers of the storage hierarchy, such as DRAM memory, would always outperform a transport that uses slower layers of the storage hierarchy, such as an NVRAM-based persistent storage presented as a distributed file system. However, our test results show that the performance of the transport using NVRAM is competitive with the transport that uses socket-based data movement across varying levels of producer and consumer concurrency.}, booktitle = {Proceedings of the Workshop on In Situ Infrastructures for Enabling Extreme-Scale Analysis and Visualization

Gu, Junmin↗

Milestone M7 Report: Reducing Excess Data Movement Part 2

This milestone evaluates techniques to measure and, if possible, reduce data movement across all levels of the memory hierarchy, focusing on CPU/GPU page level data movement and on intra-GPU memory hierarchy. We quantitatively evaluate the efficacy of the techniques in reducing data movement and measure how performance tracks data movement reduction. We study a small collection of benchmarks and proxy mini-apps that run on advanced pre-exascale GPUs and on the Accelsim GPU simulator. Our approach has two thrusts: to measure advanced data movement reduction directives and techniques on the newest available GPUs, and to evaluate our benchmark set on simulated GPUs configured with architectural refinements to reduce data movement. We primarily evaluated NVidia-based architectures due to the unavailability of AMD GPU hardware and tools until very recently.

97 MATHEMATICS AND COMPUTING↗

Modeling Data Movement Performance on Heterogeneous Architectures

The cost of data movement on parallel systems varies greatly with machine architecture, job partition, and nearby jobs. Performance models that accurately capture the cost of data movement provide a tool for analysis, allowing for communication bottlenecks to be pinpointed. Modern heterogeneous architectures yield increased variance in data movement as there are a number of viable paths for inter-GPU communication. In this paper, we present performance models for the various paths of inter-node communication on modern heterogeneous architectures, including the trade-off between GPUDirect communication and copying to CPUs. Furthermore, we present a novel optimization for inter-node communication based on these models, utilizing all available CPU cores per node. Finally, we show associated performance improvements for MPI collective operations.

97 MATHEMATICS AND COMPUTING↗

Milestone M6 Report: Reducing Excess Data Movement Part 1

This is the second in a sequence of three Hardware Evaluation milestones that provide insight into the following questions: What are the sources of excess data movement across all levels of the memory hierarchy, going out to the network fabric? What can be done at various levels of the hardware/software hierarchy to reduce excess data movement? How does reduced data movement track application performance? The results of this study can be used to suggest where the DOE supercomputing facilities, working with their hardware vendors, can optimize aspects of the system to reduce excess data movement. Quantitative analysis will also benefit systems software and applications to optimize caching and data layout strategies. Another potential avenue is to answer cost-benefit questions, such as those involving memory capacity versus latency and bandwidth. This milestone focuses on techniques to reduce data movement, quantitatively evaluates the efficacy of the techniques in accomplishing that goal, and measures how performance tracks data movement reduction. We study a small collection of benchmarks and proxy mini-apps that run on pre-exascale GPUs and on the Accelsim GPU simulator. Our approach has two thrusts: to measure advanced data movement reduction directives and techniques on the newest available GPUs, and to evaluate our benchmark set on simulated GPUs configured with architectural refinements to reduce data movement.

97 MATHEMATICS AND COMPUTING↗

Bulk Data Movement for Climate Dataset: Efficient Data Transfer Management with Dynamic Transfer Adjustment

Many scientific applications and experiments, such as high energy and nuclear physics, astrophysics, climate observation and modeling, combustion, nano-scale material sciences, and computational biology, generate extreme volumes of data with a large number of files. These data sources are distributed among national and international data repositories, and are shared by large numbers of geographically distributed scientists. A large portion of data is frequently accessed, and a large volume of data is moved from one place to another for analysis and storage. One challenging issue in such efforts is the limited network capacity for moving large datasets to explore and manage. The Bulk Data Mover (BDM), a data transfer management tool in the Earth System Grid (ESG) community, has been managing the massive dataset transfers efficiently with the pre-configured transfer properties in the environment where the network bandwidth is limited. Dynamic transfer adjustment was studied to enhance the BDM to handle significant end-to-end performance changes in the dynamic network environment as well as to control the data transfers for the desired transfer performance. We describe the results from the BDM transfer management for the climate datasets. We also describe the transfer estimation model and results from the dynamic transfer adjustment.

97 MATHEMATICS AND COMPUTING↗

Data Movement Categories

We have endeavored to classify the commonly seen data movement needs, as observed in data-intensive institutions (both commercial and non-profit), into four categories. Knowing how to map a data movement task into one of the four categories helps select proper data mover tools. For each category, how the data storage is involved, high-level examples and the nature of typical solutions are described. Finally, some general remarks are provided to help further orient readers new to this field - the 4th IT pillar.

99 GENERAL AND MISCELLANEOUS↗

A Workflow-based Intelligent Network Data Movement Advisor with End-to-end Performance Optimization

Next-generation eScience applications often generate large amounts of simulation, experimental, or observational data that must be shared and managed by collaborative organizations. Advanced networking technologies and services have been rapidly developed and deployed to facilitate such massive data transfer. However, these technologies and services have not been fully utilized mainly because their use typically requires significant domain knowledge and in many cases application users are even not aware of their existence. By leveraging the functionalities of an existing Network-Aware Data Movement Advisor (NADMA) utility, we propose a new Workflow-based Intelligent Network Data Movement Advisor (WINDMA) with end-to-end performance optimization for this DOE funded project. This WINDMA system integrates three major components: resource discovery, data movement, and status monitoring, and supports the sharing of common data movement workflows through account and database management. This system provides a web interface and interacts with existing data/space management and discovery services such as Storage Resource Management, transport methods such as GridFTP and GlobusOnline, and network resource provisioning brokers such as ION and OSCARS. We demonstrate the efficacy of the proposed transport-support workflow system in several use cases based on its implementation and deployment in DOE wide-area networks.

97 MATHEMATICS AND COMPUTING↗

Analyzing Data Movements and Identifying Techniques for Next-generation High-bandwidth Networks

High-bandwidth networks are poised to provide new opportunities in tackling large data challenges in today's scientific applications. However, increasing the bandwidth is not sufficient by itself; we need careful evaluation of future high-bandwidth networks from the applications’ perspective. We have investigated data transfer requirements of climate applications as a typical scientific example and evaluated how the scientific community can benefit from next generation high-bandwidth networks. We have experimented with current state-of-the-art data movement tools, and realized that there is no single solution for presetting transfer parameters for optimal use of the available bandwidth. Thus, we developed an adaptive transfer methodology for tuning and optimization in wide-area data transfers. This worked well with large files. However, typical scientific datasets may include many small files. Current filecentric data transfer protocols do not perform well with managing the transfer of small files, even when using parallel streams or concurrent transfers over high bandwidth networks. In order to overcome this problem, we develop a new block-based data movement method (in contrast to the current file-based methods) to improve data movement performance and efficiency in moving large scientific datasets that contain many small files. We implemented the new block-based data movement tool, which takes the approach of aggregating files into blocks and providing dynamic data channel management. In our work, we also realized that one of the major obstacles in use of high-bandwidth networks is the limitation in host system resources. 100Gbps is beyond the capacity of today’s commodity machine, since we need substantial amount of processing power and involvement of multiple cores to fill a 40Gbps or 100Gbps network. As a result, host system performance plays an important role in the use of highbandwidth networks. We have conducted a large number of experiments with our new block-based method and with current available file-based data movement tools. In this white paper, we describe future research problems and challenges for efficient use of next-generation science networks, based on the lessons learnt and the experiences gained with 100Gbps network applications.

100Gbps network applications↗

Automated Network Services for Exascale Data Movement

The Large Hadron Collider (LHC) experiments distribute data by leveraging a diverse array of National Research and Education Networks (NRENs), where experiment data management systems treat networks as a “blackbox” resource. After the High Luminosity upgrade, the Compact Muon Solenoid (CMS) experiment alone will produce roughly 0.5 exabytes of data per year. NREN Networks are a critical part of the success of CMS and other LHC experiments. However, during data movement, NRENs are unaware of data priorities, importance, or need for quality of service, and this poses a challenge for operators to coordinate the movement of data and have predictable data flows across multi-domain networks. The overarching goal of SENSE (The Software-defined network for End-to-end Networked Science at Exascale) is to enable National Labs and universities to request and provision end-to-end intelligent network services for their application workflows leveraging SDN (Software-Defined Networking) capabilities. This work aims to allow LHC Experiments and Rucio, the data management software used by CMS Experiment, to allocate and prioritize certain data transfers over the wide area network. In this paper, we will present the current progress of the integration of SENSE, Multi-domain end-to-end SDN Orchestration with QoS (Quality of Service) capabilities, with Rucio, the data management software used by CMS Experiment.

Balcas, Justas↗

Data Movement Dominates: Advanced Memory Technology to Address the Real Exascale Power Problem

Energy is the fundamental barrier to Exascale supercomputing and is dominated by the cost of moving data from one point to another, not computation. Similarly, performance is dominated by data movement, not computation. The solution to this problem requires three critical technologies: 3D integration, optical chip-to-chip communication, and a new communication model. The central goal of the Sandia led "Data Movement Dominates" project aimed to develop memory systems and new architectures based on these technologies that have the potential to lower the cost of local memory accesses by orders of magnitude and provide substantially more bandwidth. Only through these transformational advances can future systems reach the goals of Exascale computing with a manageable power budgets. The Sandia led team included co-PIs from Columbia University, Lawrence Berkeley Lab, and the University of Maryland. The Columbia effort of Data Movement Dominates focused on developing a physically accurate simulation environment and experimental verification for optically-connected memory (OCM) systems that can enable continued performance scaling through high-bandwidth capacity, energy-efficient bit-rate transparency, and time-of-flight latency. With OCM, memory device parallelism and total capacity can scale to match future high-performance computing requirements without sacrificing data-movement efficiency. When we consider systems with integrated photonics, links to memory can be seamlessly integrated with the interconnection network-in a sense, memory becomes a primary aspect of the interconnection network. At the core of the Columbia effort, toward expanding our understanding of OCM enabled computing we have created an integrated modeling and simulation environment that uniquely integrates the physical behavior of the optical layer. The PhoenxSim suite of design and software tools developed under this effort has enabled the co-design of and performance evaluation photonics-enabled OCM architectures on Exascale computing systems.

97 MATHEMATICS AND COMPUTING↗

Layout-aware I/O Scheduling for terabits data movement

Many science facilities, such as the Department of Energy's Leadership Computing Facilities and experimental facilities including the Spallation Neutron Source, Stanford Linear Accelerator Center, and Advanced Photon Source, produce massive amounts of experimental and simulation data. These data are often shared among the facilities and with collaborating institutions. Moving large datasets over the wide-area network (WAN) is a major problem inhibiting collaboration. Next-generation, terabit-networks will help alleviate the problem, however, the parallel storage systems on the endsystem hosts at these institutions can become a bottleneck for terabit data movement. The parallel storage system (PFS) is shared by simulation systems, experimental systems, analysis and visualization clusters, in addition to wide-area data movers. These competing uses often induce temporary, but significant, I/O load imbalances on the storage system, which impact the performance of all the users. The problem is a serious concern because some resources are more expensive (e.g. super computers) or have time-critical deadlines (e.g. experimental data from a light source), but parallel file systems handle all requests fairly even if some storage servers are under heavy load. This paper investigates the problem of competing workloads accessing the parallel file system and how the performance of wide-area data movement can be improved in these environments. First, we study the I/O load imbalance problems using actual I/O performance data collected from the Spider storage system at the Oak Ridge Leadership Computing Facility. Second, we present I/O optimization solutions with layout-awareness on end-system hosts for bulk data movement. With our evaluation, we show that our I/O optimization techniques can avoid the I/O congested disk groups, improving storage I/O times on parallel storage systems for terabit data movement.

Kim, Youngjae↗

Layout-Aware I/O Scheduling for Terabits Data Movement

Many science facilities, such as the Department of Energy s Leadership Computing Facilities and experimental facilities including the Spallation Neutron Source, Stanford Linear Accelerator Center, and Advanced Photon Source, produce massive amounts of experimental and simulation data. These data are often shared among the facilities and with collaborating institutions. Moving large datasets over the wide- area network (WAN) is a major problem inhibiting collaboration. Next- generation, terabit-networks will help alleviate the problem, however, the parallel storage systems on the end-system hosts at these institutions can become a bottleneck for terabit data movement. The parallel storage system (PFS) is shared by simulation systems, experimental systems, analysis and visualization clusters, in addition to wide-area data movers. These competing uses often induce temporary, but significant, I/O load imbalances on the storage system, which impact the performance of all the users. The problem is a serious concern because some resources are more expensive (e.g. super computers) or have time-critical deadlines (e.g. experimental data from a light source), but parallel file systems handle all requests fairly even if some storage servers are under heavy load. This paper investigates the problem of competing workloads accessing the parallel file system and how the performance of wide-area data movement can be improved in these environments. First, we study the I/O load imbalance problems using actual I/O performance data collected from the Spider storage system at the Oak Ridge Leadership Computing Facility. Second, we present I/O optimization solutions with layout-awareness on end-system hosts for bulk data movement. With our evaluation, we show that our I/O optimization techniques can avoid the I/O congested disk groups, improving storage I/O times on parallel storage systems for terabit data movement.

I/O and Storage↗

An analysis of bulk data movement patterns in large-scale scientific collaborations

Large-scale research efforts such as LHC experiments, ITER, and climate modelling are built upon large, globally distributed collaborations. For reasons of scalability and agility and to make effective use of existing computing resources, data processing and analysis for these projects is based on distributed computing models. Such projects thus depend on predictable and efficient bulk data movement between collaboration sites. However, the available computing and networking resources to different collaboration sites vary greatly. Large collaboration sites (such as Fermilab, CERN) have created data centres comprising hundreds, and even thousands, of computation nodes to develop massively scaled, highly distributed cluster-computing platforms. These sites are usually well connected to outside worlds with high-speed networks with bandwidth greater than 10Gbps. On the other hand, some small collaboration sites have limited computing resources or poor networking connectivity. Therefore, the bulk data movements across collaboration sites vary greatly. Fermilab is the US-CMS Tier-1 Centre and the main data centre for a few other large-scale research collaborations. Scientific traffic (e.g., CMS) dominates the traffic volumes in both inbound and outbound directions of Fermilab off-site traffic. Fermilab has deployed a Flow-based network traffic collection and analysis system to monitor and analyze the status and patterns of bulk data movement between the Laboratory and its collaboration sites. In this paper, we discuss the current status and patterns of bulk data movement between Fermilab and its collaboration sites.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗