A re-analysis of the pilot eye-movement data.
Pilot eye movement data by recording eye fixations on flight instruments
AIRCRAFT INSTRUMENTATION↗
SEARCH · Engineering Papers
Results for “data movement”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A classification and evaluation of data movement technologies for the delivery of highly voluminous scientific data products
In this paper, we present a preliminary study of several different electronic data movement technologies. We detail our approach to classifying the technologies included in our study and present the preliminary results of some initial performance benchmarking. Our studies suggest that highly parallel TCP/IP streaming technologies, such as GridFTP and bbFTP, outperform commercial and open-source UDP-bursting technologies in several of the key data movement dimensions that we studied.
technologies↗
Instrument scanning and controlling: Using eye movement data to understand pilot behavior and strategies
Eye movement data and other parameters including instrument readings, aircraft state and position variables, and control maneuvers were recorded while pilots flew ILS simulations in a B 737. The experiment itself employed seven airline pilots, each of whom flew approximately 40 approach/landing sequences. The simulator was equipped with a night visual scene but the scene was fogged out down to approximately 60 meters (200 ft). The instrument scanning appeared to follow aircraft parameters not physical position of instruments. One important implication of the results is: pilots look for categories or packets of information. Control inputs were tabulated according to throttle, wheel position, column, and pitch trim changes. Three seconds of eye movements before and after the control input were then obtained. Analysis of the eye movement data for the controlling periods showed clear patterns. The results suggest a set of miniscan patterns which are used according to the specific details of the situation. A model is developed which integrates scanning and controlling. Differentiations are made between monitoring and controlling scans.
Dick, A. O.↗
Time-locked time-histories - A new way of examining eye-movement data
A problem often encountered when eye-movement measurement is conducted is the choice of 'indices' or 'statistics' available to present such information. The present study reports the use of the Time-Locked Time-History as a technique of value in the examination and presentation of eye-movement data. Plots created using this technique are labeled time-locked time-histories as they illustrate subject eye lookpoint during a period of time before and after a certain time-locking event. Events that occur with some degree of repetition, such as the onset or termination of control activities, warning signals, or changes in indicator positions may be utilized as time-locking events. The present study reports the use of this technique in an eye-movement study using a secondary task in which the subject must discriminate specific types of information in the display.
Comstock, J. Raymond, Jr.↗
Geometric adjustments to account for eye eccentricity in processing horizontal and vertical eye and head movement data
Neglecting the eccentric position of the eyes in the head can lead to erroneous interpretation of ocular motor data, particularly for near targets. We discuss the geometric effects that eye eccentricity has on the processing of target-directed eye and head movement data, and we highlight two approaches to processing and interpreting such data. The first approach involves determining the true position of the target with respect to the location of the eyes in space for evaluating the efficacy of gaze, and it allows calculation of retinal error directly from measured eye, head, and target data. The second approach effectively eliminates eye eccentricity effects by adjusting measured eye movement data to yield equivalent responses relative to a specified reference location (such as the center of head rotation). This latter technique can be used to standardize measured eye movement signals, enabling waveforms collected under different experimental conditions to be directly compared, both with the measured target signals and with each other. Mathematical relationships describing these approaches are presented for horizontal and vertical rotations, for both tangential and circumferential display screens, and efforts are made to describe the sensitivity of parameter variations on the calculated results.
NASA Discipline Neuroscience↗
Automated Instrumentation and Monitoring of Data Movement for Parallel Programs
Writing efficient parallel programs is complicated by the need to select the right data structure alignments and distributions, which determine the nature and volume of inter-processor communications. A large number of performance tools for parallel programs have been developed recently to expose these inter-processor communications. However, none of them support performance views or provide statistics in terms of inter-processor data structure interactions. A performance tool that tracks the interaction between individual data structures and the context of these interactions is essential for understanding the performance of both explicit message passing programs and data-parallel languages such as HPF. In this paper we discuss the use of compiler front end tools for automatically tracking data structure movements in message passing programs, and low-overhead monitoring and postprocessing of such codes. We demonstrate that robust instrumentation and low overhead monitoring of inter-processor data structure movements is possible, with the use of a number of NAS benchmark codes, run on the i860 hypercube. We also show that the data so collected can be used effectively by post processing tools that expose performance bottlenecks using graphical displays and performance statistics.
Sarukkai, Sekhar↗
Automatic Data Distribution for CFD Applications on Structured Grids
Development of HPF versions of NPB and ARC3D showed that HPF has potential to be a high level language for parallelization of CFD applications. The use of HPF requires an intimate knowledge of the applications and a detailed analysis of data affinity, data movement and data granularity. Since HPF hides data movement from the user even with this knowledge it is easy to overlook pieces of the code causing low performance of the application. In order to simplify and accelerate the task of developing HPF versions of existing CFD applications we have designed and partially implemented ADAPT (Automatic Data Distribution and Placement Tool). The ADAPT analyzes a CFD application working on a single structured grid and generates HPF TEMPLATE, (RE)DISTRIBUTION, ALIGNMENT and INDEPENDENT directives. The directives can be generated on the nest level, subroutine level, application level or inter application level. ADAPT is designed to annotate existing CFD FORTRAN application performing computations on single or multiple grids. On each grid the application can considered as a sequence of operators each applied to a set of variables defined in a particular grid domain. The operators can be classified as implicit, having data dependences, and explicit, without data dependences. In order to parallelize an explicit operator it is sufficient to create a template for the domain of the operator, align arrays used in the operator with the template, distribute the template, and declare the loops over the distributed dimensions as INDEPENDENT. In order to parallelize an implicit operator, the distribution of the operator's domain should be consistent with the operator's dependences. Any dependence between sections distributed on different processors would preclude parallelization if compiler does not have an ability to pipeline computations. If a data distribution is "orthogonal" to the dependences of an implicit operator then the loop which implements the operator can be declared as INDEPENDENT.
Frumkin, Michael↗
A Tool for Automatic Data Distribution for CFD Applications on Structured Grids
Development of HPF versions of NPB and ARC3D has shown that HPF provides an efficient, concise way to express parallelism and to organize data traffic. The use of HPF, as noted in the papers, requires an intimate knowledge of the applications and a detailed analysis of data affinity, data movement, and data granularity. To simplify and accelerate the task of developing HPF versions of existing CFD applications we have designed and implemented ADAPT (Automatic Data Alignment and Placement Tool). ADAPT analyzes a CFD application working on a single structured grid and generates HPF TEMPLATE, (RE)DISTRIBUTION, ALIGNMENT, and INDEPENDENT directives. The directives can be generated on the nest level, subroutine level, application level, or on the application interface level. ADAPT annotates an existing CFD FORTRAN application, performing computations on single or multiple grids. On each grid the application is considered as a sequence of operators, each applied to a set of variables defined in a particular grid domain. ADAPT automatically detects implicit operators (i.e., having data dependences) and explicit operators (without data dependences). For parallelization of an explicit operator ADAPT creates a template for the operator domain, aligns arrays used in the operator with the template, distributes the template, and declares the loops over the distributed dimensions as INDEPENDENT. For parallelization of an implicit operator, the distribution of the operator's domain should be consistent with the operator's dependences. Any dependence between sections distributed on different processors would preclude parallelization if the compiler does not have an ability to pipeline computations. If a data distribution is "orthogonal" to the dependences of an implicit operator, then the loop which implements the operator can be declared as INDEPENDENT. ADAPT starts with an analysis of array index expressions of the loop nests. For each pair of arrays referenced in an assignment statement, it generates an arc in the alignment graph and annotates it with an affinity relation. The template, alignment, and distribution directives for a particular loop nest are then derived from a transitive closure of the affinity relation. A compromise of data distributions in different nests and subroutines is achieved by merging annotated alignment graphs for adjacent nests/stibroutine calls in the nest/call graph of the application in the process called distribution lifting. ADAPT has been implemented as a C++ program running in conjunction with a parallelization tool called CAPTools. ADAPT uses the parse tree, interprocedural analysis and application database generated by CAPTools. It also uses the Directed Graph class, initially implemented in p2d2 (parallel debugger oi distributed programs), and some other classes supporting symbolic computations. ADAPT uses data distribution techniques described. ADAPT was tested with ARC3D and the FT benchmark and has demonstrated a code performance within a factor of 1.5 of handwritten versions.
Frumkin, Michael↗
Measurement of Characteristics and Kinematics of Sea Ice Using Microwave Satellite Data
Movement of sea ice was tracked with ERS-1 synthetic aperture radar (SAR) and validated with data from a drifting ice camp and by Argos buoys. Microwave data was better than visual data because it was not hampered by cloud cover.
sea ice remote sensing microwave sensing↗
Implementation of a fully-balanced periodic tridiagonal solver on a parallel distributed memory architecture
While parallel computers offer significant computational performance, it is generally necessary to evaluate several programming strategies. Two programming strategies for a fairly common problem - a periodic tridiagonal solver - are developed and evaluated. Simple model calculations as well as timing results are presented to evaluate the various strategies. The particular tridiagonal solver evaluated is used in many computational fluid dynamic simulation codes. The feature that makes this algorithm unique is that these simulation codes usually require simultaneous solutions for multiple right-hand-sides (RHS) of the system of equations. Each RHS solutions is independent and thus can be computed in parallel. Thus a Gaussian elimination type algorithm can be used in a parallel computation and the more complicated approaches such as cyclic reduction are not required. The two strategies are a transpose strategy and a distributed solver strategy. For the transpose strategy, the data is moved so that a subset of all the RHS problems is solved on each of the several processors. This usually requires significant data movement between processor memories across a network. The second strategy attempts to have the algorithm allow the data across processor boundaries in a chained manner. This usually requires significantly less data movement. An approach to accomplish this second strategy in a near-perfect load-balanced manner is developed. In addition, an algorithm will be shown to directly transform a sequential Gaussian elimination type algorithm into the parallel chained, load-balanced algorithm.
Eidson, T. M.↗
Parallel algorithms for interactive manipulation of digital terrain models
Interactive three-dimensional graphics applications, such as terrain data representation and manipulation, require extensive arithmetic processing. Massively parallel machines are attractive for this application since they offer high computational rates, and grid connected architectures provide a natural mapping for grid based terrain models. Presented here are algorithms for data movement on the massive parallel processor (MPP) in support of pan and zoom functions over large data grids. It is an extension of earlier work that demonstrated real-time performance of graphics functions on grids that were equal in size to the physical dimensions of the MPP. When the dimensions of a data grid exceed the processing array size, data is packed in the array memory. Windows of the total data grid are interactively selected for processing. Movement of packed data is needed to distribute items across the array for efficient parallel processing. Execution time for data movement was found to exceed that for arithmetic aspects of graphics functions. Performance figures are given for routines written in MPP Pascal.
Davis, E. W.↗
Towards the Interoperability of Web, Database, and Mass Storage Technologies for Petabyte Archives
At the San Diego Supercomputer Center, a massive data analysis system (MDAS) is being developed to support data-intensive applications that manipulate terabyte sized data sets. The objective is to support scientific application access to data whether it is located at a Web site, stored as an object in a database, and/or storage in an archival storage system. We are developing a suite of demonstration programs which illustrate how Web, database (DBMS), and archival storage (mass storage) technologies can be integrated. An application presentation interface is being designed that integrates data access to all of these sources. We have developed a data movement interface between the Illustra object-relational database and the NSL UniTree archival storage system running in a production mode at the San Diego Supercomputer Center. With this interface, an Illustra client can transparently access data on UniTree under the control of the Illustr DBMS server. The current implementation is based on the creation of a new DBMS storage manager class, and a set of library functions that allow the manipulation and migration of data stored as Illustra 'large objects'. We have extended this interface to allow a Web client application to control data movement between its local disk, the Web server, the DBMS Illustra server, and the UniTree mass storage environment. This paper describes some of the current approaches successfully integrating these technologies. This framework is measured against a representative sample of environmental data extracted from the San Diego Ba Environmental Data Repository. Practical lessons are drawn and critical research areas are highlighted.
Moore, Reagan↗
Enhancement of Otolith Specific Ocular Responses Using Vestibular Stochastic Resonance
Introduction: Astronauts experience disturbances in sensorimotor function after spaceflight during the initial introduction to a gravitational environment, especially after long-duration missions. Our goal is to develop a countermeasure based on vestibular stochastic resonance (SR) that could improve central interpretation of vestibular input and mitigate these risks. SR is a mechanism by which noise can assist and enhance the response of neural systems to relevant, imperceptible sensory signals. We have previously shown that imperceptible electrical stimulation of the vestibular system enhances balance performance while standing on an unstable surface. Methods: Eye movement data were collected from 10 subjects during variable radius centrifugation (VRC). Subjects performed 11 trials of VRC that provided equivalent tilt stimuli from otolith and other graviceptor input without the normal concordant canal cues. Bipolar stochastic electrical stimulation, in the range of 0-1500 microamperes, was applied to the vestibular system using a constant current stimulator through electrodes placed over the mastoid process behind the ears. In the VRC paradigm, subjects were accelerated to 216 deg./s. After the subjects no longer sensed rotation, the chair oscillated along a track at 0.1 Hz to provide tilt stimuli of 10 deg. Eye movements were recorded for 6 cycles while subjects fixated on a target in darkness. Ocular counter roll (OCR) movement was calculated from the eye movement data during periods of chair oscillations. Results: Preliminary analysis of the data revealed that 9 of 10 subjects showed an average increase of 28% in the magnitude of OCR responses to the equivalent tilt stimuli while experiencing vestibular SR. The signal amplitude at which performance was maximized was in the range of 100-900 microamperes. Discussion: These results indicate that stochastic electrical stimulation of the vestibular system can improve otolith specific responses. This will have a significant impact on development of vestibular SR delivery systems to aid recovery of function in astronauts after long-duration spaceflight or in people with balance disorders.
Fiedler, Matthew↗
A Web of Data Analytics Services
Cloud Computing has become the ubiquitous approach to our Big Data challenge. However, one will quickly discover that moving (a.k.a. forklifting) existing on-premise data analytics solutions to the Cloud doesn’t always translate to costing saving and performance boost. The Cloud’s elasticity, its availability, and its wide selection of computing options and selections of costing models making Cloud an attractive environment to tackle our Big Data challenge. The fact is Cloud, on its own, is not the silver bullet to our daunting challenge need for analyze and derive scientific inferences through vast collections of multi-sensor measurements. We would like to have all scientific data in one easy to access environment, but getting the world of scientific data in one analytic system is immensely difficult to achieve. This paper describes the data analytics web architecture NASA is developing by infusing instances of Integrated Data Analytics systems next to the data. The goal is to minimize unnecessary data movement through collection of data access and analytics webservices for researchers to interact with and analyze measurements without have to download data to their local computer. These services are RESTful and provisioned by the data centers with the help from subject matter and science experts. These services encapsulate the physical computing infrastructure, which could local computing cluster, on-premise or public Cloud environment.
Huang, Thomas↗
Eye aiming behavior during the solution of visual patterns.
Eye movement data used for studying nonvisual processes involved in ocular patterns
VISUAL PERCEPTION↗
[The Strategic Organization of Skill]
Eye-movement software was developed in addition to several studies that focused on expert-novice differences in the acquisition and organization of skill. These studies focused on how increasingly complex strategies utilize and incorporate visual look-ahead to calibrate action. Software for collecting, calibrating, and scoring eye-movements was refined and updated. Some new algorithms were developed for analyzing corneal-reflection eye movement data that detect the location of saccadic eye movements in space and time. Two full-scale studies were carried out which examined how experts use foveal and peripheral vision to acquire information about upcoming environmental circumstances in order to plan future action(s) accordingly.
Roberts, Ralph↗
Enhanced Video-Oculography System
A previously developed video-oculography system has been enhanced for use in measuring vestibulo-ocular reflexes of a human subject in a centrifuge, motor vehicle, or other setting. The system as previously developed included a lightweight digital video camera mounted on goggles. The left eye was illuminated by an infrared light-emitting diode via a dichroic mirror, and the camera captured images of the left eye in infrared light. To extract eye-movement data, the digitized video images were processed by software running in a laptop computer. Eye movements were calibrated by having the subject view a target pattern, fixed with respect to the subject s head, generated by a goggle-mounted laser with a diffraction grating. The system as enhanced includes a second camera for imaging the scene from the subject s perspective, and two inertial measurement units (IMUs) for measuring linear accelerations and rates of rotation for computing head movements. One IMU is mounted on the goggles, the other on the centrifuge or vehicle frame. All eye-movement and head-motion data are time-stamped. In addition, the subject s point of regard is superimposed on each scene image to enable analysis of patterns of gaze in real time.
Moore, Steven T.↗