Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data cubes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Emission-line Data Cubes of the HH 32 Stellar Jet

We analyze data cubes of over 60 emission lines in the HH 32 stellar jet acquired with the Keck Cosmic Web Imager (KCWI). The data cover the less explored blue portion of the spectrum between 3586 and 6351 Å and have both high spectral (R ∼ 10,000) and spatial (≲1″) resolution. The study includes all three major ionization states of oxygen, three Balmer lines, multiple lines of Fe ii and Fe iii, and the first data cubes ever acquired for important unblended diagnostic lines such as He ii λ4686, Ca i λ3933, and Mg i] λ4571. The data cubes generally sort according to excitation and have a relatively continuous progression from the highest-excitation ions (He ii, O iii) through the intermediate-excitation ions (O i and H i) to the lowest-excitation ions (Ca ii and Mg i). Merging the KCWI cubes with Hubble Space Telescope images leads to several new insights about the flow, including evidence for bow shocks, partial bow shocks, spur shocks, Mach disks, jet deflection shocks, a wiggling jet, and potential shock precursors. The most surprising result is that one of the velocity components of Fe ii in the Mach disk suddenly increases in flux relative to other lines by a factor of two, implying that the Mach disk vaporizes dust in the jet. Hence, jets must accelerate or entrain dust to speeds of over 300 km s{sup −1} without destroying the grains.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

More chemical detection through less sampling: amplifying chemical signals in hyperspectral data cubes through compressive sensing

Compressive sensing (CS) is a method of sampling which permits some classes of signals to be reconstructed with high accuracy even when they were sampled at sub-Nyquist rates. In this paper we explore a phenomenon in which bandwise CS sampling of a hyperspectral data cube followed by reconstruction can actually result in amplification of chemical signals contained in the cube. Perhaps most surprisingly, chemical signal amplification generally seems to increase as the level of sampling decreases. In some examples, the chemical signal is significantly stronger in a data cube reconstructed from 10% CS sampling than it is in the raw, 100% sampled data cube. We explore this phenomenon in two real-world datasets including the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset and the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset. Each of these datasets contains the release of a chemical simulant, such as glacial acetic acid, triethyl phospate, and sulfur hexafluoride, and in all cases we use the adaptive coherence estimator (ACE) to detect a target signal in the hyperspectral data cube. We end the paper by suggesting some theoretical justifications for why chemical signals would be amplified in CS sampled and reconstructed hyperspectral data cubes and discuss some practical implications.

Hyperspectral imagery, Compressive Sensing, single↗
DOE OSTI2022

iMaNGA: mock MaNGA galaxies based on IllustrisTNG and MaStar SSPs – I. Construction and analysis of the mock data cubes

ABSTRACT Galaxy formation and evolution simulations are essential tools to probe poorly known astrophysics processes, but particular care is needed to compare simulations with galaxy observations, as observed data need to be modelled as well. We present a method to generate mock galaxies from the hydro-dynamical IllustrisTNG simulations which are suited to compare with integral field spectroscopic observation of galaxies from the SDSS-IV/Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) survey. First, we include the same instrumental effects and procedures as adopted in the acquisition and analysis of real data. Furthermore, we generate the galaxy spectra from the simulations using new stellar population models based on the MaNGA stellar library (MaStar). In this way, our mock data cubes have the same spatial sampling, cover the same wavelength range (3600–10 300 Å), and share the same spectral resolution (R ≈ 1800) and flux calibration of real MaNGA galaxy spectra. In this first paper, we demonstrate the method over an early- and a late-type simulated galaxy from TNG50. We analyse the correspondent mock MaNGA-like data cubes with the same full spectral fitting code, firefly, which was used for the observed spectra. We find that the intrinsic and recovered age and metallicity gradients are consistent within 1σ, with residuals over all tassels consistent with 0 at the 68 ${{\ \rm per\ cent}}$ confidence level. We also perform the challenging test at comparing intrinsic and recovered star formation histories, finding a close resemblance between input and output. In follow-up papers, we will present a full simulated MaNGA-like catalogue (≈10 000 galaxies) with a comprehensive comparison of TNG50 simulations to MaNGA observational results.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

Data Intensive Architecture for Scalable Cyber Analytics

Cyber analysts are tasked with the identification and mitigation of network exploits and threats. These compromises are difficult to identify due to the characteristics of cyber communication, the volume of traffic, and the duration of possible attack. In this paper, we describe a prototype implementation designed to provide cyber analysts an environment where they can interactively explore a month’s worth of cyber security data. This prototype utilized On-Line Analytical Processing (OLAP) techniques to present a data cube to the analysts. The cube provides a summary of the data, allowing trends to be easily identified as well as the ability to easily pull up the original records comprising an event of interest. The cube was built using SQL Server Analysis Services (SSAS), with the interface to the cube provided by Tableau. This software infrastructure was supported by a novel hardware architecture comprising a Netezza TwinFin® for the underlying data warehouse and a cube server with a FusionIO drive hosting the data cube. We evaluated this environment on a month’s worth of artificial, but realistic, data using multiple queries provided by our cyber analysts. As our results indicate, OLAP technology has progressed to the point where it is in a unique position to provide novel insights to cyber analysts, as long as it is supported by an appropriate data intensive architecture.

Olsen, Bryan K.↗
DOE OSTI2020

Modeling Nondestructive Defect Detection in Additively Manufactured Metallic Structures for Nuclear Applications

The future of quickly, economically produced metallic nuclear reactor parts with minimal supply-chain dependence lies in Laser Powder Bed Fusion (LPBF) Additive Manufacturing (AM): a 3D printing method involving laser melting and net shaping stainless steel and Inconel metallic powder into a solid structure. However, intrinsic features in LPBF frequently leads to the formation of materials defects, such as pores, within 3D printed structures. As safe long-term use in energy applications requires knowledge of all relevant defects before deployment in a reactor, we must develop methods for nondestructive detection of these defects. We are investigating Pulsed Thermal Tomography (PTT), which is a non-contact nondestructive imaging method scalable to arbitrary structure size. Thermal tomography (TT) is a computational method for 3D spatial reconstruction of material thermal effusivity from flash or pulsed thermography temperature data cube. Thermography data cube consists of 2D surface temperature measurements at different times. The objective of the present work is to investigate limits on defect detection in AM metallic structures with PTT. To this effect, we modeled PTT with COMSOL heat transfer computer simulations. We developed a layered media COMSOL simulation consisting of a Stainless Steel 316 (SS316) plate with an internal layer of un-sintered SS316 powder. Thermophysical properties of the powder layer were modeled with equivalent volume mixing model. To account for partial sintering at the boundary of the defect, the transition between solid and powder layers was modeled as a Gaussian. Using data from COMSOL simulations, we reconstructed depth-dependent thermal effusivity, which allowed defect visibility estimation. A series of parametric studies determined that at 1mm depth, 50µm is the smallest detectable defect. In addition, classification of the defects which can lead to early fatigue of the metallic structure in a reactor is briefly discussed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Total variation vs L1 regularization: a comparison of compressive sensing optimization methods for chemical detection

One of the fundamental assumptions of compressive sensing (CS) is that a signal can be reconstructed from a small number of samples by solving an optimization problem with the appropriate regularization term. Two standard regularization terms are the L1 norm and the total variation (TV) norm. We present a comparison of CS reconstruction results based on these two approaches in the context of chemical detection, and we demonstrate that optimization based on the L1 norm outperforms optimization based on the TV norm. Our comparison is driven by CS sampling, reconstruction, and chemical detection in two real-world datasets: the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset and the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset. Both datasets contain the release of a chemical simulant such as glacial acetic acid, triethyl phosphate, and sulfur hexafluoride. For chemical detection we use the adaptive coherence estimator (ACE) and bulk coherence, and we propose algorithmic ACE thresholds to define the presence or absence of a chemical of interest in both un-compressed data cubes and reconstructed data cubes. The un-compressed data cubes provide an approximate ground truth. We demonstrate that optimization based on either the L1 norm or TV norm results in successful chemical detection at a compression rate of 90%, but we show that L1 optimization is preferable. We present quantitative comparisons of chemical detection on reconstructions from the two methods, with an emphasis on the number of pixels with an ACE value above the threshold.

Hyperspectral imagery, L1-norm, total variation, A↗
DOE OSTI2012

Methods for gas detection using stationary hyperspectral imaging sensors

According to one embodiment, a method comprises producing a first hyperspectral imaging (HSI) data cube of a location at a first time using data from a HSI sensor; producing a second HSI data cube of the same location at a second time using data from the HSI sensor; subtracting on a pixel-by-pixel basis the second HSI data cube from the first HSI data cube to produce a raw difference cube; calibrating the raw difference cube to produce a calibrated raw difference cube; selecting at least one desired spectral band based on a gas of interest; producing a detection image based on the at least one selected spectral band and the calibrated raw difference cube; examining the detection image to determine presence of the gas of interest; and outputting a result of the examination. Other methods, systems, and computer program products for detecting the presence of a gas are also described.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

THE DATA REDUCTION PIPELINE FOR THE SDSS-IV MaNGA IFU GALAXY SURVEY

Mapping Nearby Galaxies at Apache Point Observatory (MaNGA) is an optical fiber-bundle integral-field unit (IFU) spectroscopic survey that is one of three core programs in the fourth-generation Sloan Digital Sky Survey (SDSS-IV). With a spectral coverage of 3622–10354 Å and an average footprint of ∼500 arcsec{sup 2} per IFU the scientific data products derived from MaNGA will permit exploration of the internal structure of a statistically large sample of 10,000 low-redshift galaxies in unprecedented detail. Comprising 174 individually pluggable science and calibration IFUs with a near-constant data stream, MaNGA is expected to obtain ∼100 million raw-frame spectra and ∼10 million reduced galaxy spectra over the six-year lifetime of the survey. In this contribution, we describe the MaNGA Data Reduction Pipeline algorithms and centralized metadata framework that produce sky-subtracted spectrophotometrically calibrated spectra and rectified three-dimensional data cubes that combine individual dithered observations. For the 1390 galaxy data cubes released in Summer 2016 as part of SDSS-IV Data Release 13, we demonstrate that the MaNGA data have nearly Poisson-limited sky subtraction shortward of ∼8500 Å and reach a typical 10 σ limiting continuum surface brightness μ = 23.5 AB arcsec{sup −2} in a five-arcsecond-diameter aperture in the g -band. The wavelength calibration of the MaNGA data is accurate to 5 km s{sup −1} rms, with a median spatial resolution of 2.54 arcsec FWHM (1.8 kpc at the median redshift of 0.037) and a median spectral resolution of σ = 72 km s{sup −1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Temporal Analysis and Scene Change Detection in Multispectral Overhead Imagery

Scene change detection can be a tedious and time consuming process especially when concerning large geographical areas, and the process can be even more cumbersome when analyzing changes in an area over large spans of time. Developing a useful way to help analysts recognize at what points in time significant changes to a scene have occurred can allow them to better focus their efforts in characterizing events. Applications include: Facility monitoring, Construction chronology, Monitoring of vehicle/aircraft activity, Characterization of larger sequences of events. In large areas exceeding hundreds to thousands of square kilometers in size, it can be difficult localizing when scene changes have occurred. Analysts can spend hours going through imagery to try to identify new construction, monitor facility activities, monitor vehicle movement, etc. where the object of interest may only be a few square meters. Our goal is to help cut down this time by giving analysts change maps with hot spots of change, allowing them to focus on regions that have experienced actual change in time frames they're interested in. Additionally, by combining these change maps into layers within a data cube, analysts can examine the change maps from a temporal perspective, allowing events to be characterized over spans of time. By opening the data cube in an imaging software capable of separating the layers, we can analyze the change maps sequentially, allowing us to examine scene changes occurring over time. As an example, we examined overhead imagery from Planet Labs of what appears to be a parking lot on Fort Irwin over the course of a year using ENVI, a geospatial satellite imagery analysis software. Using ENVI, we generate a graph of changes over time, and notice a particular segment near the end of our analysis window where no changes are detected. Examination of the actual satellite imagery reveals that during this time span, the parking lot was empty. This could be due to facility shutdown for maintenance or upgrades, or possibly even total workforce/vehicle fleet movement. Information like this could help analysts better characterize events, as well as to help create clearer timelines in larger sequences of events. Workflow steps: - Collect multiple maps of the same AOI (Area of Interest) during a time span of interest; - Generate change maps from AOI maps; - Generate data cube from change maps. An analyst can use the data cube to help inspect an AOI for activities within a time span of interest. If an event of interest is discovered, the analyst can then refer to the maps corresponding to the appropriate dates and times in the data cube to see precisely what is transpiring. The biggest objective being worked on is improving the change detection methodology employed. We currently use PCA-EM (Principal Component Analysis with Expectation Maximization), but we are currently focusing on implementing IR-MAD (Iteratively Reweighted Multivariate Alteration Detection) to be used in conjunction with PCA-EM in an effort to decrease false positivity and noise in the change maps we generate.

42 ENGINEERING↗
DOE OSTI2020

Imaging of Calibrated Defects in Additively Manufactured Materials: Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components

Additive manufacturing (AM, or 3D printing) for commercial nuclear energy applications is an emerging method for cost-efficient manufacturing aimed at replacing aging nuclear reactor parts and reducing costs for new construction. Known material flaws in AM include low-density regions consisting of non-sintered powder, which have to be detected to ensure the safety of long-term performance nuclear reactor components. Currently, limited options are available for nondestructive evaluation (NDE), either during or post manufacturing. As a solution to NDE of AM, we are developing pulsed thermal imaging which is non-contact, one-sided, and scalable to arbitrary size and shape of the AM parts. Pulsed thermography (PT) system utilizes a high intensity flash lamp to rapidly heat surface of sample, and a high sensitivity fast-frame megapixel infrared (IR) camera to capture data of surface temperature variations. The acquired data cube consists of a stack of surface temperature images taken at different times. Information about material internal defects is extracted by analyzing the data cube. This report provides results of preliminary performance evaluation of pulsed thermal imaging capability in detection of imprinted flaws in AM metallic structures. The flaws were introduced into AM parts as imprinted hemispherical low density regions, consisting of trapped un-sintered metallic powder. Specimens for developed for this study consisted of AM stainless steel 316 and Inconel 718 plates. The diameters of imprinted defects varied from 1mm to 8mm, and their depths below the plate flat surface varied between 1mm and 6mm. Pulsed thermal tomography (PTT) processes the measured data cube to obtain 3D reconstructions of material effusivity using a unique inversion algorithm developed at Argonne. PTT has been previously used in imaging of similar size flat bottom hole (FBH) simulated defects in stainless steel 316 and Inconel 718 specimens. In the study involving AM specimens, PTT imaging results have shown that 1mm-diameter defects located 1mm and 2mm below the surface of specimens were detectable. Larger size defects were detectable at greater depth. We also explored an alternative approach to detection of material flaws in PT data cube, which is using neural learning-based approach to blind source separation. Detection of small material defects requires finding features in the data cube which have signal contrast levels approaching sensitivity limit of IR camera. In this study, an optimized Neural Learning based Blind Source Separation (NLBSS) algorithm, including Principal Component Analysis (PCA), and Independent Component Analysis (ICA) is demonstrated to automatically extract principal temporal and spatial features of thermography frames to enhance flaw detection. By using the NLBSS algorithm, material internal defects can be automatically detected. Furthermore, this processing approach compensates for experimental thermal imaging artifacts, such as noise and uneven heating. By merging artificial intelligence with phtotothermics, the NDE system detects internal calibrated defects of various sizes and depths in AM nuclear-grade metallic alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2013

THE VIRUS-P EXPLORATION OF NEARBY GALAXIES (VENGA): SURVEY DESIGN, DATA PROCESSING, AND SPECTRAL ANALYSIS METHODS

We present the survey design, data reduction, and spectral fitting pipeline for the VIRUS-P Exploration of Nearby Galaxies (VENGA). VENGA is an integral field spectroscopic survey, which maps the disks of 30 nearby spiral galaxies. Targets span a wide range in Hubble type, star formation activity, morphology, and inclination. The VENGA data cubes have 5.''6 FWHM spatial resolution, {approx}5 A FWHM spectral resolution, sample the 3600 A-6800 A range, and cover large areas typically sampling galaxies out to {approx}0.7R{sub 25}. These data cubes can be used to produce two-dimensional maps of the star formation rate, dust extinction, electron density, stellar population parameters, the kinematics and chemical abundances of both stars and ionized gas, and other physical quantities derived from the fitting of the stellar spectrum and the measurement of nebular emission lines. To exemplify our methods and the quality of the data, we present the VENGA data cube on the face-on Sc galaxy NGC 628 (a.k.a. M 74). The VENGA observations of NGC 628 are described, as well as the construction of the data cube, our spectral fitting method, and the fitting of the stellar and ionized gas velocity fields. We also propose a new method to measure the inclination of nearly face-on systems based on the matching of the stellar and gas rotation curves using asymmetric drift corrections. VENGA will measure relevant physical parameters across different environments within these galaxies, allowing a series of studies on star formation, structure assembly, stellar populations, chemical evolution, galactic feedback, nuclear activity, and the properties of the interstellar medium in massive disk galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Pan-sharpening for microscopy

Techniques for generating full-spatial resolution, full spectral resolution image(s) from a 3D spectral-data cube for any spectral value within a given spectral range are provided without requiring the acquisition of all full-spatial resolution, full spectral resolution data by an instrument. The 3D spectral-data cube is generated from a limited number of full-spatial resolution, sparse spectral resolution data and a sparse-spatial resolution, full-spectral resolution data of the same area of the sample. The use of the 3D spectral-data cube reduces the data acquisition time.

Ovchinnikova, Olga S.↗
DOE OSTI2021

Performance of Compact Pulsed Thermal Imaging System for In-Service Applications. Pulsed thermal tomography nondestructive examination of additively manufactured reactor materials and components

Additive manufacturing (AM) is an emerging method for cost-efficient fabrication of complex topology nuclear reactor parts from high-strength corrosion resistance alloys, such as stainless steel and Inconel. AM of metallic structures for nuclear energy applications is currently based on laser powder bed fusion (LPBF) process, which has the capability of melting metallic powder and net shaping the structures with relatively high precision. Some of the challenges with using LPBF method for nuclear manufacturing include the possibility of introducing pores into metallic structures. Integrity of AM structures needs to be evaluated nondestructively because material flaws could lead to premature failures due to creep in high temperature nuclear reactor environment. Currently, there exist limited capabilities to evaluate actual AM structures nondestructively. Pulsed Thermography (PT) imaging provides a capability for non-destructive evaluation (NDE) of sub-surface defects in arbitrary size structures. The PT method is based on recording material surface temperature transients with infrared (IR) camera following thermal pulse delivered on material surface with flash light. The PT method has advantages for NDE of actual AM structures because the method involves one-sided non-contact measurements and fast processing of large sample areas captured in one image. The data cube of PT measurements consists of surface temperature taken at sequential time intervals T(x,y,t). Material defects can be detected either by analyzing the thermograms T(x,y,t) data cube, or by using thermal tomography (TT) algorithm to obtain 3D spatial reconstruction of thermal effusivity e(x,y,z). To reduce the cost and enable in-service NDE in spatially constrained environment, it is highly desirable to develop PT with compact and inexpensive IR camera. Following initial qualification of an AM component for deployment in a nuclear reactor, a compact PT system can also be used for in-service nondestructive evaluation (NDE) applications. However, data cube obtained with PT based on compact IR camera suffers from strong thermal noises and loss of features due to relatively low sampling rate. In this report we describe two unsupervised machine learning (ML) algorithms for enhancement of PT images obtained with compact IR camera. In one approach, we introduce Sparse Coding Discrete Cosine Transform (SC/DCT) algorithm to remove additive white Gaussian noise (AWGN) from spatial thermal effusivity reconstructions. In another approach we introduce a Spatial Temporal Denoised Thermal Source Separation (STDTSS) ML algorithm to process thermograms. The STDTSS algorithm consists of spatial and temporal denoising using Gaussian and Savitzky–Golay filtering, followed by the matrix decomposition using Principal Component Analysis (PCA), and Independent Component Analysis (ICA) to automatically detect flaws. In the work described in this report, we constructed a compact PT system using a relatively small and low-cost FLIR A65 camera, consisting on uncooled microbolometer detector. Performance of SC/DCT algorithm was demonstrated on enhancing TT images of Inconel 718 AM plate. Performance of the STDTSS methods was investigated using thermography data obtained from imaging stainless steel 316L specimens produced with LPBF method with imprinted calibrated porosity defects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2015

“ICE CUBES” IN THE CENTER OF THE MILKY WAY: WATER-ICE AND HYDROCARBONS IN THE CENTRAL PARSEC

The close environment of the central supermassive black hole of our Galaxy has been studied thoroughly for decades in order to shed light on the behavior of the central regions of galaxies in general and of active galaxies in particular. The Galactic center (GC) has shown a wealth of structures on different scales with a complicated mixture of early- and late-type stars, ionized and molecular gas, dust, and winds. Here we aim to study the distribution of water-ices and hydrocarbons in the central parsec, as well as along the line of sight. This study is made possible thanks to L-band spectroscopy. This spectral band, from 2.8 to 4.2 μm, hosts important signatures of the circumstellar medium and interstellar dense and diffuse media among which deep absorption features are attributed to water-ices and hydrocarbons. We observed the GC in the L band of the ISAAC spectrograph located on the UT1/VLT ESO telescope. By mapping the central half parsec using 27 slit positions, we were able to build the first data cube of the region in this wavelength domain. Thanks to a calibrator spectrum of the foreground extinction in the L band derived in a previous paper, we corrected our data cube for the line-of-sight extinction and validated our calibrator spectrum. The data show that a residual absorption due to water-ices and hydrocarbons is present in the corrected data cube. This suggests that the features are produced in the local environment of the GC, implying very low temperatures well below 80 K. This is in agreement with our finding of local CO ices in the central parsec described in Moultaka et al.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

SUBTRACTING FOREGROUNDS FROM INTERFEROMETRIC MEASUREMENTS OF THE REDSHIFTED 21 cm EMISSION

The ability to subtract foreground contamination from low-frequency observations is crucial to reveal the underlying 21 cm signal. The traditional line-of-sight methods can deal with the removal of diffuse emission and unresolved point sources, but not bright point sources. In this paper, we introduce a foreground cleaning technique in Fourier space, which allows us to handle all such foregrounds simultaneously and thus sidestep any special treatments to bright point sources. Its feasibility is tested with a simulated data cube for the 21 CentiMeter Array experiment. This data cube includes more realistic models for the 21 cm signal, continuum foregrounds, detector noise, and frequency-dependent instrumental response. We find that a combination of two weighting schemes can be used to protect the frequency coherence of foregrounds: the uniform weighting in the uv plane and the inverse-variance weighting in the spectral fitting. The visibility spectrum is therefore well approximated by a quartic polynomial along the line of sight. With this method, we demonstrate that the huge foreground contamination can be cleaned out effectively with residuals on the order of {approx}10 mK, while the spectrally smooth component of the cosmological signal is also removed, bringing about a systematic underestimate in the extracted power spectrum primarily on large scales.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

Three-Dimensional Quantitative Chemical Roughness Of Buried ZrO2/In2O3 Interfaces Via Energy-Filtered Electron Tomography

The protocol to calculate the chemical roughness from three-dimensional (3-D) data cube acquired by energy-filtered electron tomography has been developed and applied to analyze the 3-D Zr distribution at the arbitrarily shaped interfaces in the ZrO2/In2O3 multilayer films. The calculated root-mean-square roughness quantitatively revealed the chemical roughness at the buried ZrO2/In2O3 interfaces, which is the deviation of Zr distribution from the ideal flat interface. Knowledge of the chemistry and structure of oxide interfaces in 3-D provides information useful for understanding changes in the behavior of a model ZrO2/In2O3 heterostructure that has potential to exhibit mixed conduction behavior. VC 2012 American Institute of Physics.

Zhong, X Y↗
DOE OSTI2017

DHIGLS: DRAO H I intermediate galactic latitude survey

Observations of Galactic H i gas for seven targeted regions at intermediate Galactic latitude are presented at 1{sup ′} angular resolution using data from the DRAO Synthesis Telescope (ST) and the Green Bank Telescope (GBT). The DHIGLS data are the most extensive arcminute-resolution measurements of the diffuse atomic interstellar medium beyond those in the Galactic plane. The acquisition, reduction, calibration, and mosaicking of the DRAO ST data and the cross calibration and incorporation of the short-spacing information from the GBT are described. The high quality of the resulting DHIGLS products enables a variety of new studies in directions of low Galactic column density. We analyze the angular power spectra of maps of the integrated H i emission (column density) from the data cubes for several distinct velocity ranges. In fitting power-spectrum models based on a power law, but including the effects of the synthesized beam and noise at high spatial frequencies, we find exponents ranging from −2.5 to −3.0. Power spectra of maps of the centroid velocity for these components give similar results. These exponents are interpreted as being representative of the three-dimensional density and velocity fields of the atomic gas, respectively. We find evidence for dramatic changes in the H i structures in channel maps over even small changes in velocity. This narrow line emission has counterparts in absorption spectra against bright background radio sources, quantifying that the gas is cold and dense and can be identified as the cold neutral medium phase. Fully reduced DHIGLS H i data cubes and other data products are available at www.cita.utoronto.ca/DHIGLS.

79 ASTRONOMY AND ASTROPHYSICS↗