Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupling method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Multiscale thermal hydraulic coupling methods for boiling water reactor simulation

During the last two years, the Virtual Environment for Reactor Applications (VERA) has been extended to simulate boiling water reactors (BWRs). The thermal hydraulic effects present in BWRs are far more complex than those in pressurized water reactors (PWRs). Therefore, the runtime is significantly increase and convergence behavior worse compared to PWRs. Most of the additional runtime is spent during the first few coupled iterations, when the power shape is still rapidly evolving, dramatically affecting the thermal hydraulics (TH). To alleviate the increased computational expense, a multiscale TH coupling approach was developed in VERA in which a highly efficient, simplified TH model is solved for several coupled iterations until the power shape is partially converged. The simplified solution is used to inform the assembly-wise flow distribution in the high-fidelity TH solver CTF, reducing the amount of work required to properly balance the pressure drop in each channel and reducing runtime for the couple calculation. Because the final TH calculations are performed with CTF, there is ultimately no impact on the accuracy of the converged solution. This paper presents the details of this multiscale TH coupling approach, along with results for a 4x4 array of GE-14 fuel bundles and whole-core coupled simulations of the Hatch core. These two cases show that the multiscale approach dramatically reduces the runtime of coupled BWR simulations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

A Partial Coupling Method to Isolate the Roles of the Atmosphere and Ocean in Coupled Climate Simulations

This study describes the formulation and application of a partial coupling method that disentangles the coupling between the atmosphere and ocean and isolates the atmosphere- and ocean-driven components of the coupled climate interactions. In contrast to strategies using stand-alone simulations with prescribed atmosphere or ocean states, the climate components in the partially coupled method remain coupled, but the impact of ocean circulation changes is removed from the air-sea interaction using temperature-like tracers. The partially coupled simulation thereby suppresses the ocean-driven interaction and isolates an atmosphere-driven interaction only. The ocean-driven component can be inferred by comparing climate response in the partially coupled simulation with that of a standard fully coupled one. The partial coupling approach is applied to decompose the fully coupled climate response to CO 2 quadrupling into atmosphere- and ocean-driven components. The linearity of the decomposition is validated by simulating the ocean-driven response using another complimentary partially coupled simulation forced only with the atmosphere-driven anomalous surface fluxes. A comparison of the two partially coupled simulations with the fully coupled simulation indicates that the sum of the atmosphere- and ocean-driven components accurately describes the fully coupled response. The decomposition identifies several robust atmosphere- and ocean-driven features of the global warming and provides new insights into the impacts of atmospheric feedbacks on the Atlantic overturning circulation and sea ice response to CO 2 increase.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Review of Local-to-Nonlocal Coupling Methods in Nonlocal Diffusion and Nonlocal Mechanics

Local-to-nonlocal (LtN) coupling refers to a class of methods aimed at combining nonlocal and local modeling descriptions of a given system into a unified coupled representation. This allows to consolidate the accuracy of nonlocal models with the computational expediency of their local counterparts, while often simultaneously removing nonlocal modeling issues such as surface effects. The number and variety of proposed LtN coupling approaches have significantly grown in recent years, yet the field of LtN coupling continues to grow and still has open challenges. This review provides an overview of the state of the art of LtN coupling in the context of nonlocal diffusion and nonlocal mechanics, specifically peridynamics. Furthermore, we present a classification of LtN coupling methods and discuss common features and challenges. The goal of this review is not to provide a preferred way to address LtN coupling but to present a broad perspective of the field, which would serve as guidance for practitioners in the selection of appropriate LtN coupling methods based on the characteristics and needs of the problem under consideration.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Multiphysics Coupling Methods for Molten Salt Reactor Modeling and Simulation in VERA

New multiphysics coupling capabilities for molten salt reactor (MSR) analysis have been developed in the Virtual Environment for Reactor Applications (VERA). This development consisted of two main efforts. First, a generic species transport module was added in the CTF code, which is the thermal-hydraulics (TH) code for VERA. This module uses the velocity fields for which CTF solves during the TH calculation to transport species through the core and around the primary loop. Additionally, a gas sparging model has been added to CTF to model the movement of certain species, namely, fission products such as xenon gas, to transport between the molten salt and gas bubbles present in the salt. The second effort in this development was coupling this capability to VERA’s neutron transport code MPACT. This effort focused on coupling the detailed TH transport models in CTF to MPACT to account for feedback effects in the neutron transport calculations. Finally, the thermochemistry code Thermochimica has also been coupled to VERA. Thermochimica performs pointwise calculations for chemical potential and Gibbs free energy and determines what phases are produced by the temperature, pressure, and elemental concentrations at different locations in the primary loop. These capabilities are demonstrated using a model of the Molten Salt Reactor Experiment (MSRE). Furthermore, this reactor operated at Oak Ridge National Laboratory in the 1960s, providing sources of experimental data that were used to develop the model. Various combinations of species were modeled using VERA’s new multiphysics coupling capabilities. Species distributions and reactivity effects behaved as expected for the MSRE model, demonstrating that the coupling is behaving correctly and causing appropriate feedback. The results of these calculations show the potential for VERA to be used for a wide variety of MSR analyses.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

On numerical energy conservation for an implicit particle-in-cell method coupled with a binary Monte-Carlo algorithm for Coulomb collisions

We report conventional particle-in-cell (PIC) methods suffer from enhanced numerical heating (explicit PIC) or cooling (semi-implicit PIC) when coupled with a binary Monte-Carlo algorithm for Coulomb collisions. In this work, a fully-implicit θ-PIC scheme (with adjustable time-biasing parameter 1/2 ≤ θ ≤) is considered. The discrete change in energy of a closed system after a time step for this scheme scales with (1/2 - θ)C θ , where C θ is a positive definite quantity that depends on the frequency spectrum of the energy in the fields. Collisions lead to additional energy in the field fluctuations associated with high-frequency light waves produced by a numerical Bremsstrahlung process, which can result in a large increase in the numerical cooling rate for θ > 1/2. However, for θ = 1/2, energy is exactly conserved. The energy in the field fluctuations on long time scales agrees with that calculated using the equipartition theorem for a classical system in thermodynamic equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Photocatalyst-free, light-induced carbon-sulfur cross-coupling methods

In one aspect, the invention provides a method of promoting a carbon-sulfur bond forming reaction. In certain embodiments, the reaction comprises cross-coupling of a(n) (hetero)aryl halide with a thiol to form the carbon-sulfur bond, wherein the method is promoted by light irradiation in the absence of a photocatalyst. In other embodiments, the cross-coupling reaction can be promoted through visible light irradiation, including sunlight.

Miyake, Garret↗
DOE OSTI2021

Anthraquinone Flow Battery Reactants with Nonhydrolyzable Water-Solubilizing Chains Introduced via a Generic Cross-Coupling Method

Water-soluble anthraquinones (AQs) hold great promise serving as redox-active species in aqueous organic flow batteries. Systematic investigations into how the properties of redox molecules depend on the water-solubilizing groups (WSGs) and the way in which they are bound to the redox core are, however, still lacking. We introduce WSGs linked to anthraquinone by C=C bonds via a cross-coupling reaction and convert C=C to C–C bonds through hydrogenation. The anthraquinone and the WSGs are connected via (un)branched chains with (un)saturated bonds. We investigate the influence of chains and ionic ending groups on the redox potentials of the molecules and identify three important trends: (1) The electron-withdrawing ending groups can affect the redox potentials of AQs with two unsaturated hydrocarbons on the chains through π-conjugation. (2) For chains with two (un)saturated straight hydrocarbons, WSGs increase the redox potentials of the AQs in the order PO 3 2– < CO 2 – < SO 3 – . (3) AQs with (un)saturated chains at high pH possess desirably low redox potentials, high solubilities, and high stability. Disproportionation leads to the formation of anthrone, which can be regenerated to anthraquinone. Tautomerization results in the saturation of alkene chains, stabilizing the structure. Here, we utilize these observations to identify a potentially low-cost and long-lifetime negative electrolyte that demonstrates a temporal fade rate as low as 0.0128%/day when paired with a potassium ferrocyanide positive electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2021

Mass-conserving implicit–explicit methods for coupled compressible Navier–Stokes equations

Earth system models are composed of coupled components that separately model systems such as the global atmosphere, ocean, and land surface. While these components are well developed, coupling them in a single system can be a significant challenge. Computational efficiency, accuracy, and stability are principal concerns. In this study we focus on these issues. In particular, implicit–explicit (IMEX) tight and loose coupling strategies are explored for handling different time scales. For a simplified model for the air–sea interaction problem, we consider coupled compressible Navier–Stokes equations with an interface condition. Under the rigid-lid assumption, horizontal momentum and heat flux are exchanged through the interface. Several numerical experiments are presented to demonstrate the stability of the coupling schemes. Here, we show both numerically and theoretically that our IMEX coupling methods are mass conservative for a coupled compressible Navier–Stokes system with the rigid-lid condition

42 ENGINEERING↗
DOE OSTI2021

Relativistic coupled‐cluster and equation‐of‐motion coupled‐cluster methods

Abstract The development of relativistic coupled‐cluster (CC) and equation‐of‐motion coupled‐cluster (EOM‐CC) methods is reviewed. An emphasis is placed on recent efforts to improve the computational efficiency of CC and EOM‐CC calculations with non‐perturbative treatments of spin‐orbit coupling (SO‐CC and EOM‐CC) by partially recovering spin symmetry in the formulations. Example calculations of electronic ground state as well as valence‐excited and core‐excited states for molecules containing heavy elements are presented to demonstrate the applicability and usefulness of the SO‐CC and EOM‐CC methods. Future directions for the development of the SO‐CC and EOM‐CC methods are also discussed. This article is categorized under: Electronic Structure Theory > Ab Initio Electronic Structure Methods

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrochemical Strategy for Hydrazine Synthesis: Development and Overpotential Analysis of Methods for Oxidative N–N Coupling of an Ammonia Surrogate

Hydrazine is an important industrial chemical and fuel that has attracted considerable attention for use in liquid fuel cells. Ideally, hydrazine could be prepared via direct oxidative coupling of ammonia, but thermodynamic and kinetic factors limit the viability of this approach. Here, the present study evaluates three different electrochemical strategies for the oxidative homocoupling of benzophenone imine, a readily accessible ammonia surrogate. Hydrolysis of the resulting benzophenone azine affords hydrazine and benzophenone, with the latter amenable to recycling. The three different electrochemical N–N coupling methods are (1) a proton-coupled electron-transfer process promoted by a phosphate base, (2) an iodine-mediated reaction involving intermediate N–I bond formation, and (3) a copper-catalyzed N–N coupling process. Analysis of the thermodynamic efficiencies for these electrochemical imine-to-azine oxidation reactions reveals low overpotentials (η) for the copper- and iodine-mediated processes (390 and 470 mV, respectively), but a much higher value for the proton-coupled pathway (η ≈ 1.6 V). A similar approach is used to assess molecular electrocatalytic methods for electrochemical oxidation of ammonia to dinitrogen.

25 ENERGY STORAGE↗
DOE OSTI2023

A Hybrid Domain Overlapping Method for Coupling System Thermal Hydraulics and CFD Codes

A hybrid multiscale coupling methodology based on a domain overlapping approach has been developed for coupling System Thermal Hydraulics (STH) and Computational Fluid Dynamics (CFD) codes. The method has been implemented between the modern STH code SAM and the CFD code NekRS, using the coupling tool Cardinal. The coupling aims to extend the STH code's applicability to scenarios where local momentum and energy transfers are important yet difficult for STH codes to capture, such as three-dimensional mixing. Two coupling strategies are implemented and compared: a hybrid domain overlapping method and the conventional domain decomposition method. Here, the strategies are applied to two closed-loop applications, and the present method shows superior stability behavior when compared to the domain decomposition method. Then, the present coupling method is validated against experimental data from a double T-junction experiment. The present STH/CFD coupling shows improved agreement with experimental data when compared to STH standalone simulations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Toward DMRG-tailored coupled cluster method in the 4c-relativistic domain

There are three essential problems in computational relativistic chemistry: Electrons moving at relativistic speeds, close lying states, and dynamical correlation. Currently available quantum-chemical methods are capable of solving systems with one or two of these issues. However, there is a significant class of molecules in which all the three effects are present. These are the heavier transition metal compounds, lanthanides, and actinides with open d or f shells. For such systems, sufficiently accurate numerical methods are not available, which hinders the application of theoretical chemistry in this field. In this paper, we combine two numerical methods in order to address this challenging class of molecules. These are the relativistic versions of coupled cluster methods and the density matrix renormalization group (DMRG) method. To the best of our knowledge, this is the first relativistic implementation of the coupled cluster method externally corrected by DMRG. The method brings a significant reduction of computational costs as we demonstrate on the system of TlH, AsH, and SbH.

Brandejs, Jan (ORCID:0000000221073095)↗
DOE OSTI2025

The approximate second order coupled-cluster method based on a size-consistent Brillouin–Wigner partitioning

We present a variant of the approximate second order coupled-cluster method (CC2) with a two-parameter size-consistent Brillouin–Wigner (BW-s) partitioning instead of a Møller–Plesset (MP) partitioning for the unperturbed Hamiltonian, which we refer to as BWs-CC2. The computational complexity of this model scales identically to CC2 with molecular size. Conventional CC2 and its regularized BWs-CC2 variants, as well as conventional MP2 and two of its regularized BW-s2 variants, were assessed on a 535 element database spanning thermochemistry, non-covalent interactions, barrier heights, and isomerization energies. To ensure a well-defined model chemistry, the assessment was performed using internally stable spin-polarized Hartree–Fock (HF) orbitals in the finite aug-cc-pVQZ basis without counterpoise corrections. As a result of using stable orbitals, contrary to conventional wisdom, we find that CC2 substantially outperforms MP2 on molecules with significantly spin contaminated reference orbitals without a significant increase in error on systems with a spin-pure reference, showing the value of its single substitutions. While no single choice of regularization parameters can be optimal for all datasets, we find that BWs-CC2 generally outperforms both CC2 and BW-s2 with a single judicious parameter choice. Additional tests on dipole moments and bond lengths of diatomics provide further support for the utility of this choice. Furthermore, the main outliers and poorest performing cases are associated with large amounts of spin-contamination in the HF reference, which is indicative of systems with either strong correlation or extensive artificial symmetry breaking. Overall, these findings argue that the perception of the quality of the CC2 ground state should be reevaluated and that it can be further improved upon by the soundly based BWs-CC2 variant with the recommended parameter choice.

Correlation energy↗
DOE OSTI2022

Unitary Selective Coupled-Cluster Method

Simulating molecules using the Variational Quantum Eigensolver method is one of the promising applications for NISQ-era quantum computers. Designing an efficient ansatz to represent the electronic wave function is crucial in such simulations. Standard unitary coupled-cluster with singles and doubles (UCCSD) ansatz tends to have a large number of insignificant terms that do not lower the energy of the system. In this work, we present a unitary selective coupled-cluster method, a way to construct a unitary coupled-cluster ansatz iteratively using a selection procedure with excitations up to fourth order. This approach uses the electronic Hamiltonian matrix elements and the amplitudes for excitations already present in the ansatz to find the important excitations of higher order and to add them to the ansatz. The important feature of the method is that it systematically reduces the energy error with increasing ansatz size for a set of test molecules. {The main advantage of the proposed method is that the effort to increase the ansatz does not require any additional measurements on a quantum computer.}

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Comparison of Artificial Compressibility Methods for Coupled Laminar Fluid Flow and Heat Transfer

Artificial compressibility (AC) methods for incompressible flows perturb the mass continuity equation by the time derivative of the pressure field to achieve direct coupling between pressure and velocity without the need for a projection method. Several variations of the original AC method have been proposed (e.g., the entropically damped artificial compressibility [EDAC] method) that can, in some scenarios, improve on the original model. In this paper, we methodically compare the results of the original AC model and the EDAC model for both steady-state and transient problems with coupling between the momentum and energy equations. We demonstrate that the EDAC model and the AC model yield similar numerical results, and the EDAC model is 10%-20% faster than the AC model for a given problem.

Oz, Furkan [ORNL] (ORCID:0000000265831724)↗