Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “corn stover”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Let’s Stick Together: Interplay of Moisture, Particle Size, and Anatomical Fraction in the Flowability of Corn Stover Crumbles

Handling of agricultural waste biomass feedstocks (such as corn stover) is a persistent challenge in the production of biofuels and chemicals at integrated biorefineries. Inconsistent flowability and high feedstock variability creates equipment downtime and processing challenges. This work investigates the influence of anatomical fractionation and moisture content on the bulk solids handling behavior of corn stover crumbles. A combination of rotational shear testing, tribological measurements, and surface and sorption characterization techniques (inverse gas chromatography (IGC), dynamic vapor sorption (DVS), and electron microscopy) were used to evaluate the contributions of particle composition, size, and surface properties to flow behavior. Shear and frictional testing revealed that moisture content has the greatest effect on flowability, significantly increasing unconfined yield strength (ƒ c ) and reducing the flow function coefficient (F F C), regardless of anatomical fraction. While differences in surface energy were observed between fractions, particularly in polar contributions (γ AB ), these did not correspond to meaningful differences in flow behavior. Coarser 6 mm particles exhibited poorer flow performance than 4 mm crumbles, likely due to broader particle size distributions and increased particle interlocking. Taken together, these results suggest that anatomical fractionation provides minimal benefit from a bulk handling perspective. Moisture content and particle size heterogeneity dominate handling behavior, reinforcing the utility of unfractionated corn stover in processing environments. These insights can inform the design of more efficient and reliable feedstock processing systems for agricultural biomass in integrated biorefineries.

09 BIOMASS FUELS↗
DOE OSTI2025

Enhanced Feedstock Characterization and Modeling to Facilitate Optimal Preprocessing and Deconstruction of Corn Stover (Final Report)

This project addresses the challenge of processing corn stover by fractionating this biomass feedstock to both streamline processing and generate new potential co-products. Additionally, the project developed new field-deployable analytical tools that can be coupled with empirical models that were used to predict feedstock properties and processing performance. The overall scope of this project was: (1) identify conditions for optimal corn stover fractionation using a two- stage physical fractionation, (2) assess how physical fractionation impacts properties, partitioning of biomass, and response to processing, (3) further adapt, develop, and validate several advanced characterization tools for assessing biomass properties that can be linked to processing behavior, and (4) develop and validate predictive models based on measurements that can be performed “in the field” or “at the biorefinery gate” to predict feedstock processing behavior (preprocessing and deconstruction). The first objective employed pre-separation processing (size reduction) which was next subjected to enhanced separations to yield fractions enriched or depleted in select compositional components or properties. For the second objective, fractions were screened for their response to post-separation processing (pretreatment and enzymatic hydrolysis). Detailed characterization profiles were developed and dynamic image analysis to assess distribution of particle size and morphology. For the final objective, we utilized these tools to develop empirical models to assess the relative abundance of tissue type in order to assess fractionation efficacy and to predict fraction performance during pretreatment and enzymatic hydrolysis.

09 BIOMASS FUELS↗
DOE OSTI2025

Go with the Flow: Additives to Improve the Flowability of Crumbled Corn Stover

For this work, magnesium stearate (MgSt), a common flow additive and anticaking agent, was applied to corn stover feedstocks with three particle sizes. The material handling properties of dry, 15%, and 30% moisture content corn stover were measured with a Freeman FT-4 powder rheometer and mass flow hopper calculations. While hydrated biomass typically exhibits poor flowability, introducing MgSt led to a significant increase in flowability for dry and 15% moisture content feedstocks, with less impact at 30% moisture content. Inverse gas chromatography showed a decrease, up to 40%, in the surface energy of MgSt-coated corn stover. While MgSt may not be ideal for biofuel or chemical production, this study highlights the potential of flow additives to reduce adhesive and cohesive forces, improving biomass feedstock handling.

09 BIOMASS FUELS↗
DOE OSTI2025

Understanding the Effects of Ash Content on Various Pretreatment Technologies for the Bioconversion of Corn Stover

Here, the study aimed to examine the effects of adding biomass ash on the biochemical processes involved in fermentable sugar production. Corn stover was pretreated using several methods—hot water, dilute acid, alkaline, γ-valerolactone, and ionic liquid methods, each examined with ash loadings of 7.18% and 21.07%. The findings demonstrated that increased ash content adversely affected both pretreatment and enzymatic hydrolysis. Specifically, the total sugar yield was 3 to 16% lower at the higher ash content across all pretreatment methods, and up to 4.01% lower during enzymatic hydrolysis. For acidic pretreatment, the sugar yield decreased as ash content increased. In contrast, ash content had a lesser impact on alkaline pretreatment compared to acidic pretreatment. For example, using corn stover with an ash content as high as 22.65% resulted in only a 2.90% decrease in total sugar yield compared to corn stover without added ash. Further, the primary reasons for the reduced sugar yield in higher ash biomass during acidic pretreatments were likely the neutralizing effect of the ash and decreased acid access to the substrates. During enzymatic hydrolysis, ash reduced the sugar yield by limiting enzyme access to cellulose.

09 BIOMASS FUELS↗
DOE OSTI2025

Unveiling Feedstock Variability: Insights into Corn Stover Conversion - Part I: Physicochemical Properties and Self-Degradation

Transforming agricultural waste into biofuels and bioproducts is crucial to advancing a low-carbon bioeconomy. However, the inherent variability in the composition and quality introduces uncertainties in the conversion efficiency and poses challenges in process development. Through integrating a high-throughput conversion system, material characterization techniques, and advanced data analysis tools, this study investigates the variability of corn stover and its subsequent impacts on carbohydrate conversion. The findings reveal that indoor storage substantially reduces the moisture and ash content and soil contamination, while other properties remain largely unchanged. Self-degradation due to microbial activity during storage decreases the carbohydrate content of corn stover but enhances glucose and xylose yields. A negative correlation is observed between sugar yields and lignin content across samples with varying ash and moisture content. The inhibitory effect of lignin diminishes in self-degraded samples likely due to the disrupted cell wall structure. Although self-degradation slightly increases cellulose crystallinity, no strong correlation was observed between the crystallinity and sugar yield. Hot water pretreatment under mild conditions effectively mitigates inherent variability, consistently improving the sugar yield from corn stover by up to 50%. By elucidating the feedstock variability and its impact on convertibility, these findings offer valuable insights into appropriate feedstock handling and management, highlighting potential strategies to address variability challenges.

09 BIOMASS FUELS↗
DOE OSTI2024

Low Field NMR Relaxometry Characterization of Water Adsorption in Corn Stover Anatomical Fractions

Low magnetic field 2 MHz NMR relaxometry is applied to measure water adsorption processes of intact corn stover anatomical fractions. Comparison with high magnetic field 250 MHz relaxometry of milled corn stover fractions as a function of water activity, i.e., relative humidity, provides insight into the microstructural changes of the biomass and varying water molecular dynamics during adsorption. As a result, the data presented establish a basis for low field portable NMR of biomass in situ in field and processing environments.

09 BIOMASS FUELS↗
DOE OSTI2025

A chemical-recovery-free ammonium sulfite-based alkali pretreatment of corn stover for low-cost sugar production via fertilizer use of waste liquor

The production of cellulosic sugars is a pivotal strategy for advancing biomass bioconversion. This study evaluated the pretreatment of corn stover using ammonium sulfite and potassium hydroxide to develop comprehensive data on sugar, lignin, chemicals, and overall mass recovery profiles in a batch reactor at 80 °C. The results indicated significant improvements in delignification, deacetylation, enzymatic digestibility, and overall sugar yield. Specifically, pretreating corn stover with a solution of 40 wt% potassium hydroxide and 15 wt% ammonium sulfite at 80 °C for 2 h achieved 78.9 % lignin removal and 82.1 % acetyl removal, resulting in a total sugar yield exceeding 87.5 % with an enzyme loading of 12.5 mg protein/g-glucan plus xylan. The pretreated spent liquor, containing ammonium, potassium, sulfur, biomass-derived organics, and inorganics, demonstrated substantial potential as a fertilizer. The techno-economic analysis projected a minimum sugar selling price of $0.285 per pound, supporting the ongoing development and implementation of chemical-recovery-free pretreatment technology.

09 BIOMASS FUELS↗
DOE OSTI2025

Advancing sustainable aviation fuel with high-energy-density bicycloalkanes production from corn stover mixed sugars

Bicycloalkanes stand out as a replacement for aromatics from conventional jet fuel (CJF) because of their high energy density and lower freezing point. Most reports to date have focused on synthesizing bicycloalkanes using model compounds or single sugar components of lignocellulose. Here, we utilize all lignocellulosic sugars of corn stover (CS) to produce bicycloalkanes. First, furfural (FFR) and 5-hydroxymethyl furfural (5-HMF) are produced via acid-catalyzed dehydration, achieving combined FFRs molar yields ranging from 65% to 73%, respectively. The resulting FFRs are converted to cyclopentanones with molar yields within the range of 57%–63% via hydrogenation and Piancatelli rearrangement. Further aldol condensation of cyclopentanones yields C 10 -C 12 oxygenates with 80 mol %. Lastly, these oxygenates are directly hydrodeoxygenated to bicycloalkanes in a yield of 83.8 mol %. The resulting bicycloalkanes exhibit tier α fuel properties consistent with Jet A fuel (CJF) specifications and blend compatibility with CJF at a 37% volumetric ratio.

09 BIOMASS FUELS↗
DOE OSTI2025

Mechanical separations of corn stover anatomical fractions in an integrated feedstock preprocessing system: An experimental and data-driven modeling study

High variabilities of material attributes in lignocellulosic biomass present risks for biofuel and biochemical productions and must be mitigated via preprocessing. Since almost no mechanical device is originally designed for processing biomass, how to operate existing apparatuses with efficient performance has not been investigated extensively. This work presents a study on an integrated screening and air classification to separate cobs and stalks from husks and leaves in corn stover. Prototype machine learning models were developed to assess the feasibility of predicting the process outcome based on the measurable parameters. The models trained upon limited experimental data rendered decent predictive accuracy of yield and purity. The experimental data and modeling results collectively suggest decreasing throughput leads to a higher purity. To the contrary, if throughput increases, a lower purity is likely. A possible trade-off between yield and purity of the separated streams indicates the need for optimal combinations of feedstock size, moisture, and throughput to achieve optimized separations. The results of this study also suggest the need to further improve model predictability by developing more accurate formulations for physics governing the integrated unit operations. To accomplish this, additional experimental data needs to be generated for model training.

09 - BIOMASS FUELS↗
DOE OSTI2026

Effects of Recovery Conditions and Aggregation Mechanisms on the Chemical and Physical Properties of Hybrid Poplar and Corn Stover Lignins

Heterogeneity in the physical properties and processing behavior of lignins recovered from biorefining process streams can hinder their effective utilization and industrial valorization. This work investigates lignin recovery by acidification from alkaline pretreatment liquors of varying sources (corn stover and hybrid poplar), compositions, solid contents, and incubation temperatures prior to filtration. Recovered lignins were characterized for filtration performance, mass yield, chemical composition, particle size and morphology, and color. A transition temperature was identified corresponding to marked shifts in lignin physical properties and was a function of the solid content and liquor source. Filtration below this temperature yielded slow-filtering, dark, brittle lignins with smoother particle surfaces, whereas precipitation above this threshold yielded fast-filtering, lighter, powdery lignins with rougher particle surfaces. The impact of temperature and concentration on universal cluster aggregation mechanisms was proposed to explain the differences between lignin particle properties and filtration behavior.

Aggregation↗
DOE OSTI2025

Effects of pH on potassium sulfite based alkali pretreatment of corn stover under mild conditions

Sulfite salt-based alkali pretreatment is increasingly recognized as an effective method for biomass pretreatment under mild temperature conditions. However, the effects of pH on the pretreatment process are not yet fully understood. In this study, the pretreatment of corn stover using potassium sulfite (KS) combined with aqueous ammonia (AA) at 80 °C was investigated within a pH range of 9–14. Results demonstrated that high pH environment established by combining KS with AA is critical for enhancing sulfonation modifications, effectively removing lignin, facilitating deacetylation, and significantly improving the total sugar yield. For example, when comparing KS alone at pH 9.7, AA alone at pH 13, and KS combined with AA at pH 13, the delignification rates were 13.82 %, 67.71 %, and 71.27 %, respectively; the deacetylation rates were 25.84 %, 81.19 %, and 82.54 %, respectively; and the total sugar yields were 24.85 %, 78.96 %, and 92.12 %, respectively. The X-ray photoelectron spectroscopy (XPS) results confirmed that sulfonation reactions occurred under low-temperature and high pH conditions, leading to enhanced delignification efficiency. Results also showed that the cellulase adsorption, water retention, and the enzymatic digestibility of the pretreated solids increased along with rising pH. Moreover, nuclear magnetic resonance (NMR) analysis revealed that KS-based alkali pretreatment retained more β-O-4 native bonds in the pretreated lignin-rich hydrolysate than alkali pretreatment alone did, providing promising opportunities for the subsequent upgrading of lignin into high-value products.

09 BIOMASS FUELS↗
DOE OSTI2025

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗
DOE OSTI2026

Hydrogen production from full-strength corn stover fermentation effluent in single-chamber replaceable-cathode microbial electrolysis cells

Lignocellulosic residual biomass generated by the agricultural sector is an abundant feedstock for biohydrogen production via dark fermentation. However, this process is intrinsically inefficient, converting only ~30% of the reductant energy into H2 and leaving substantial amounts of reduced byproducts. These byproducts, mostly found in the fermentation effluents, can be further valorized in microbial electrolysis cells (MECs) to enhance the overall H2 recovery. However, current MEC configurations are typically dual- or single-chamber systems, yet both suffer from key inefficiencies. Dual-chamber systems rely on proton exchange membranes that are costly and prone to rapid biofouling, whereas single-chamber, membraneless systems are limited by reduced productivity due to H2 recycling and methanogenic consumption In this study, three single-chamber, 50-mL replaceable-cathode microbial electrolysis cells (RC-MECs) were 3D-printed and equipped with a physical separator to isolate anode and cathode compartments and limit H2 migration. Full-strength milled corn stover (MCS) fermentation effluent (COD of ~23.8 g-COD/L) was treated in fed-batch mode over two operational periods spanning 21 (Run 1) and 80 (Run 2) days. The RC-MECs exhibited comparable performance in both runs: after biofilm maturation, current densities exceeded 100 A/m²_cathode, COD removal reached up to 43%. Notably, extended RC-MECs operation led to a substantial methanogenic activity with the CH4 fraction in the cathode gas increasing to as high as 80% of the total biogas. Additions of a methanogenesis inhibitor 2-bromoethanesulfonate (2-BES) produced transient increases in hydrogen yields (11.51 and 5.12 L-H2/L_reactor/day in Runs 1 and 2, respectively); however, sustained 2-BES addition in subsequent cycles reduced total biogas production, decreased COD removal, and led to volatile fatty acid accumulation. Overall, single-chamber MECs can treat high-strength dark fermentation effluents while improving H2 recovery, but methanogenesis remains a key bottleneck, and complete long-term inhibition may be operationally unsustainable.

Hydrogen Production↗
DOE OSTI2026

The oleaginous yeast Cutaneotrichosporon oleaginosum modifies corn stover alkali lignin

The current paradigm in synthetic biology for lignin bioconversion platforms includes primarily bacteria and filamentous fungi. Yeast are notoriously understudied for their role in lignin degradation and utilization, despite their ubiquity in saprophytic microbial communities. A few publications report lignin-modifying yeasts, but investigations to date have relied on model aromatic compounds or lignin-containing substrates replete with other carbon sources. In this work, we use a suite of analytical tools to evaluate interactions between corn stover-extracted lignin and the oleaginous yeast Cutaneotrichosporon oleaginosum. Notably, 2D-NMR analysis showed a significant decrease in the H-lignin component as well as resinol (β-β) and phenylcoumaran (β-5) linkages. Using super-resolution fluorescence microscopy, we demonstrated that this yeast may uptake polymeric lignin and/or undertakes interactions at the cellular envelope. To explore mechanisms of lignin modification, transport, and aromatics catabolism, extensive secretomics and proteomics analyses were conducted. Compared to carbon-limited glucose and “No Carbon” controls, several putative laccases, quinone reductases, superoxide dismutases, and glyoxal/oxalate oxidases were upregulated in the lignin condition. Excitingly, two ferric reductases and an oxalate exchanger were only observed in the lignin condition. These results indicate that C. oleaginosum may perform extracellular quinone redox cycling to generate lignin-modifying reactive oxygen species. These findings enhance our understanding of yeast-lignin interactions and provide valuable insights for validation studies and metabolic engineering.

09 BIOMASS FUELS↗
DOE OSTI2025

Inducible flippase-mediated metabolic engineering of Rhodosporidium toruloides for enhanced 3-hydroxypropionic acid production from corn stover hydrolysate

Rhodosporidium toruloides has gained increasing interests as a promising non-model host organism to produce a wide range of bioproducts from lignocellulosic biomass. Increasing the bioproduct titers, rates, and yields remains a challenge, largely due to a lack of robust and well-characterized genetic tools in this host. Here we developed an inducible flippase (FLP) and flippase recognition target (FRT) system that enables genetic manipulations without the need for additional selection markers. Synthetic inducible promoters were established, enabling regulation of FLP expression and efficient antibiotic marker removal. Leveraging this system, we engineered a strain to optimize 3-hydroxypropionic acid (3HP) production. Over four rounds of iterative genomic editing to resolve pathway bottlenecks, we achieved a 3HP titer of 69.4 g/L in fed-batch fermentation - the highest level reported in yeast from lignocellulosic hydrolysates. The engineered high 3HP producing strain offers a robust platform for sustainable bio-based chemical production from lignocellulosic feedstocks.

3-hydroxypropionic acid↗