Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “compostable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Correction to “Greenhouse Gas and Air Pollutant Emissions from Composting”

Composting can divert organic waste from landfills, reduce landfill methane emissions, and recycle nutrients back to soils. However, the composting process is also a source of greenhouse gas and air pollutant emissions. Researchers, regulators, and policy decision-makers all rely on emissions estimates to develop local emissions inventories and weigh competing waste diversion options, yet reported emission factors are difficult to interpret and highly variable. This review explores the impacts of waste characteristics, pretreatment processes, and composting conditions on CO 2 , CH 4 , N 2 O, NH 3 , and VOC emissions by critically reviewing and analyzing 388 emission factors from 46 studies. The values reported to date suggest that CH 4 is the single largest contributor to 100-year global warming potential (GWP100) for yard waste composting, comprising approximately 80% of the total GWP 100 . For nitrogen-rich wastes including manure, mixed municipal organic waste, and wastewater treatment sludge, N 2 O is the largest contributor to GWP 100 , accounting for half to as much as 90% of the total GWP 100 . If waste is anaerobically digested prior to composting, N 2 O, NH 3 , and VOC emissions tend to decrease relative to composting the untreated waste. Effective pile management and aeration are key to minimizing CH 4 emissions. However, forced aeration can increase NH 3 emissions in some cases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Greenhouse gas flux response in biochar- and compost-amended urban soils under simulated soil hydrologic dynamics

Understanding greenhouse gas emission dynamics in lawn soils is essential for improving climate change mitigation strategies in urban and suburban environments. This project measured fluxes of carbon dioxide (CO 2 ), methane (CH 4 ), and nitrous oxide (N 2 O) fluxes from turfgrass soil columns amended with biochar, compost, biochar-compost blend, control (no amendment) in a controlled greenhouse mesocosm experiment. This project simulated contrasting water saturation regimes consisting of normal irrigation with sprinkler, transient half or full saturation by water table manipulation, and subsequent drying phase under both sod or seeded grass conditions. Compost-amended columns (compost or biochar-compost blend) exhibited higher average CO 2 fluxes (6 µmol m-2 s-1) compared to biochar or control columns (4.5 – 5.0 µmol m-2 s-1) across all saturation levels under sod conditions. Seeded grass conditions generally resulted in less CO 2 emissions. The CO 2 fluxes were positively correlated with air temperature and negatively correlated with soil moisture. Biochar-amended columns retained high soil moisture (~95 %) throughout experiments, demonstrating superior moisture retention compared to compost. CH 4 and N 2 O fluxes exhibited temporal increases (5-8 nmol m-2 s-1) during saturation and drainage phases, indicating their sensitivity to hydrologic conditions. These findings suggest that temperature and amendment types are primary driver of CO 2 emissions, while CH 4 and N 2 O fluxes are more responsive to water saturation dynamics in lawn soils.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Counterintuitive Compatibilization of Poly(-Valerolactone) and Poly(L-Lactic Acid) by Statistical Copolymers toward Compostable and Recyclable Packaging

Poly(δ-valerolactone) (PVL) and poly(l-lactic acid) (PLLA) are bioderivable, compostable, and chemically recyclable plastics with synergistic properties for addressing plastic waste accumulation in receiving environments. Though recyclable-by-design polymers often fall short of competing with incumbent materials, blending affords a means to leverage individual component strengths toward ideal tunable properties. Polymer blends are often immiscible, but a range of methodologies are available to promote mixing. Here, we report on the compatibilization of 9 immiscible PVL and PLLA blends with three different compatibilization agents: thermoplastic starch, synthesized PVL-co-PLLA statistical copolymers (SCPs), and synthesized PVL-b-PLLA block-type copolymers. Resulting degrees of compatibilization are observed through scanning electron microscopy, corroborated by thermal and mechanical analyses monitoring performance as a function of microdomain size. Small-angle and wide-angle X-ray scattering experiments are conducted to observe the influence of compatibilizers on individual crystalline phases to further elucidate material behavior. Molecular dynamics simulations provide key insights into the interfacial interactions between homopolymers and compatibilizers. Finally, a suite of end-of-life avenues is established by biodegradation in industrial composting conditions, chemical recycling by deconstruction to hydroxymethyl esters, and direct chemical depolymerization to lactone precursors in mixed feed. Overall, we highlight several promising blends and the counterintuitive SCP compatibilization phenomenon toward high-performance, sustainable materials.

Compatibilization, copolymer compatibilizer, bio-b↗
DOE OSTI2025

Blending Compostable Plastics for Packaging Applications

Non-sustainable packaging materials (polymers) are a large portion of the increasing amount of plastic waste that become environmental pollutants. While many biodegradable or compostable polymers have been developed in recent years, most fail to compete with the non-sustainable polymers dominating the market, due to lack of certain desired properties, such as thermal (high melt temperature) and mechanical (high ductility) performance. For example, the popular compostable polymer polylactic acid (PLLA) has a high melt temperature but is very brittle. Another polymer, poly(d-valerolactone) (PVL) demonstrates great ductility but has a very low melt temperature. By blending PLLA and PVL, there is an opportunity to create a new biodegradable material with synergistic desired properties for packaging applications. In this study, we produce several (9) physical blends of PVL and PLLA with varying compositions of the two polymers while applying three different materials to make them more compatible (compatibilizers). We test the success of compatibilization by scanning electron microscopy (SEM), mechanic testing (strain at break) and differential scanning calorimetry (melting temperature). Overall, we highlight several promising materials with high compatibility and desired thermomechanical properties for sustainable packaging. Ideally, these materials could help mitigate future plastic pollution in Colorado and beyond.

blending↗
DOE OSTI2025

Combining organic amendments with enhanced rock weathering shifts soil carbon storage in croplands

Enhanced rock weathering (ERW) involves applying crushed silicate minerals to cropland soils to remove carbon dioxide and stabilize the global climate. If practiced widely, ERW has the potential to mitigate climate change and improve soil health and crop productivity. However, most ERW studies emphasize inorganic carbon (IC) chemistry, using model-based estimates and short-term mesocosms. Limited field data exist on how ERW interacts with organic amendments to affect organic carbon (C) cycling in soils. In a three-year field study in conventionally managed, irrigated maize fields, we monitored how key soil variables responded to crushed rock-alone, and in combination with compost and/or biochar. We measured weathering indicators (pH, major cations, and IC contents) and organic fractions, including particulate organic matter (POM), mineral-associated organic matter (MAOM), microbial biomass C, and water-extractable organic C. Rock-alone treatments increased weathering proxies (pH and IC) and showed an increasing trend in POM and MAOM, relative to control. In contrast, combining crushed rock with organic amendments resulted in lower soil organic C and nitrogen (N) concentrations (in both POM and MAOM) compared to organic amendments alone, though IC increased in the rock+compost treatment. Combining rock with both compost and biochar (compost/biochar) significantly lowered MAOM-N compared to compost/biochar alone. Overall, co-applying rock with organic inputs may promote weathering and C accrual but slow the accrual rate of organic C and N relative to organic amendments alone. Quantifying these trade-offs over multiple years and scales is critical to integrating ERW with existing soil health practices and climate mitigation strategies.

Biological and medical sciences↗
DOE OSTI2025

Degradable Biocomposite Thermoplastic Polyurethanes

In this project, the team developed tough and degradable biocomposite thermoplastic polyurethanes (TPUs) by incorporating bacterial spores into TPUs as a biofunctional living filler. The team screened various bacteria and selected the Bacillus subtilis ATCC 6633 strain as the final candidate, primarily due to its genomic availability, sporulation ability and TPU assimilation activity. The heat-shock tolerance of ATCC 6633 spores was further improved through evolutionary engineering via Adaptive Laboratory Evolution (ALE), demonstrating a 17.7-fold enhanced germination efficiency post heat-shock treatment compared to the wild-type strain (WT). The team fabricated biocomposite TPUs by incorporating lyophilized powder of heat-shock tolerized (HST) spores during the hot melt extrusion (HME) of TPU at 135 °C. The baseline TPU used in this project is a commercially available soft-grade TPU (BCF45) manufactured by BASF. Colony forming unit (CFU) assays quantified that WT and HST spores in the TPU matrix retained approximately 20% and 100% survivability, respectively, after HME. Tensile testing demonstrated that the spores behaved as a polymer-reinforcing filler, positively affecting the overall tensile properties of the biocomposite TPU. For example, biocomposite TPU with WT and HST spores (BC TPU WT and BC TPU HST , respectively) exhibited up to 25% and 37% improved toughness, respectively, compared to TPU without spores. BC TPU HST showed remarkably improved disintegration in autoclaved compost (92% mass loss in 5 months), which simulated a microbially poor environment for TPU degradation. When compared to TPU without spores (44% mass loss in 5 months) the acceleration of degradation is marked. Respirometry confirmed that 72% of BC TPU HST was biomineralized into CO2 within 6 months, indicating that spores in the biocomposite TPU were germinated by utilizing nutrients in the autoclaved compost, facilitating TPU degradation at the end of the material's life. The team demonstrated the scale-up of biocomposite TPU fabrication using continuous extrusion and injection molding techniques. Processing conditions optimized in a lab-scale microcompounder were successfully transferred to a continuous extruder with a 30-fold increased throughput. Biocomposite TPUs prepared using these industry-relevant processes showed comparable toughness improvements to samples prepared in the lab-scale extruder. Excitingly, following compounding in the pilot-extruder the composite material could be injection molded, while retaining high spore viability and similar toughness improvements. The team also found that spores in biocomposite TPU served as antioxidants, preventing toughness decay during the recycled extrusion of BC TPU HST . Long-term storage tests over one year showed that the addition of spores had no negative effect on the longevity of the TPU. Furthermore, the team demonstrated the fabrication of spore-bearing biocomposite polymers with other polyesters such as PBAT, PLA, and PCL. We obtained promising preliminary data that showed overall toughness improvements for all polymers with spore addition. Finally, life cycle assessment (LCA) and techno-economic analysis (TEA) were carried out, which indicated minimal additional cost of fabrication. Overall, a tough and degradable biocomposite thermoplastic was successfully developed through this project, with all tasks completed successfully, achieving >100% of the objectives.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Making an s1G Self-Preserving Environmental DNA (eDNA) Filter from Sustainable Materials

Environmental DNA (eDNA) sampling of aquatic environments is a powerful new tool for resource managers to use in detecting the presence of rare and endangered species. The use of eDNA for species detection is quickly becoming an industry-standard methodology in environmental science, and the technology sector is moving quickly to create purpose-built tools for eDNA sampling. Smith-Root, Inc. pioneered the new technology of self-preserving eDNA filters that automatically preserve the DNA captured on filters by desiccating the internal filter membrane. This capability saves the sampling technician significant time in the field and drastically reduces the potential for sample contamination. One main constraint of this new technology, however, is the necessity of single-use plastics for eDNA sampling. Single-use designs are employed because sampling equipment must be devoid of potential contaminating DNA, and the time required to sterilize equipment is often not cost-effective for practitioners. Thus, this technology is creating a significant new source of plastic waste—something that eDNA practitioners, and society, would like to avoid. This project explores the use of alternative bio based polymers and composites as replacements for incumbent industrial standards for eDNA filtration systems, with an emphasis on ease of processing and biodegradable options. 8 candidate materials, 3 for the top filter housing and 5 for the bottom filter housing, were investigated to replace incumbent housing materials. Of the 8 candidates, 2 materials were identified for future investigation which met performance requirements, were bio-based and could potentially offer better disposal options like soil degradation or composting, features sought by the customers of these products. The top housing candidate, material 1, has comparable performance to the incumbent material and equally manufacturable. The bottom housing candidate, material 6, improved desiccation performance by 81% after 1 hour in comparison to the incumbent material, is 100% bio-based, compostable and can be sourced domestically throughout the U.S.A.

36 MATERIALS SCIENCE↗
DOE OSTI2026

High-Capacity Enzymatic Degradation of Postconsumer Poly(ethylene terephthalate): Modeling and Experimental Investigations

Enzymatic degradation is considered as one of the key steps for biorecycling of polyethylene terephthalate (PET), a widely used plastic. Recently, we have developed an optimized leaf-branch compost cutinase PelB-LCC ICCG and demonstrated ∼80% degradation of 200 g L −1 recycled PET (RPET) within two days in bioreactors. In this study, continued research efforts were made to achieve a complete degradation of up to 300 g L −1 RPET in bioreactors. First, low-capacity reaction conditions with ≤5 g L −1 PET were examined to identify the key variables for PET degradation with PelB-LCC ICCG , including temperature, enzyme loading, and product inhibition. To better understand and further optimize the enzymatic degradation process, a mechanism-based model was established to describe the kinetics of PET degradation and formation of the main product terephthalic acid (TPA) and byproducts MHET and BHET in high-capacity bioreactors. Model simulation suggested that a minimal enzyme loading of ∼1.4 mg PelB-LCC ICCG g −1 RPET is required to achieve a nearly complete degradation of RPET within 48 h, which was used to guide more high-capacity experiments with 100−300 g L −1 RPET in fully controlled 1 L bioreactors. A higher temperature (≥65 °C) was found not only to enable rapid degradation in the beginning but also to induce a gradual increase in RPET’s crystallinity and significantly slow down the degradation after 48 h. A high loading of RPET solids and the accumulation of the produced insoluble TPA pose a big challenge on mixing and mass transfer in the stirred bioreactor, which can be addressed by increasing the stirring speed. The results pave the way toward biorecycling of PET at a large scale.

enzymatic degradation↗
DOE OSTI2025

Phosphorus budgets of intensively managed row crops at a long–term agroecosystem research site in the upper US Midwest

Phosphorus (P) budgets for cropping systems provide insights for keeping soil P at optimal levels for crops while avoiding excess inputs. We quantified 12 years of P inputs (fertilizer and atmospheric deposition) and outputs (harvest and leaching losses) for replicated maize (Zea mays L.)—soybean (Glycine max L.)—wheat (Triticum aestivum) crop rotations under conventional, no-till, reduced input, and biologically based (organic without compost or manure) management systems at the Kellogg Biological Station LTAR site in southwest Michigan. Conventional, no-till, and reduced input systems were fertilized between 13 and 50 kg P ha –1 depending on year. Soil test phosphorus (STP) was measured at 0- to 25-cm depth every autumn. Leached P was measured as dissolved P in the soil solution sampled beneath the rooting depth and combined with modeled percolation. Fertilization and harvest were the predominant P fluxes in the fertilized systems, whereas only harvest dominated P flux in the unfertilized organic system. Leaching losses were minor terms in the budgets, but leachate concentrations were nevertheless close to the range of concern for downstream eutrophication. Over the 12-year study period, the organic system exhibited a negative P balance (–82.0 kg P ha –1 ), coinciding with suboptimal STP levels, suggesting a need for P supplementation. In contrast, the fertilized systems showed positive P balances (mean: 70.1 kg P ha –1 ) with STP levels well above agronomic optima. Results underscore the importance of tailored P management strategies to sustain crop productivity while mitigating environmental impacts.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Enhanced Weathering May Benefit From Co‐Application With Organic Amendments

Abstract Enhanced weathering has emerged as a promising natural climate solution that has the potential to remove billions of tons of carbon from the atmosphere if widely adopted in agricultural settings. Despite this potential, few field trials have been published that verify the carbon dioxide removal (CDR) potential of enhanced weathering in croplands and, until now, none had been published in grazing lands. Anthony et al. (2025, https://doi.org/10.1029/2024AV001480 ) conducted the first trial of enhanced weathering in a California rangeland and showed weathering of ground silicate rocks despite drought conditions in an already dry climate. Co‐application of inorganic (silicate rocks) with organic (biochar and compost) amendments revealed not just additive, but synergistic effects whereby organic amendments increased rates of weathering. This is important because field CDR rates were <10% of the theoretical maximum (i.e., the rate if basalt was completely weathered); thus, methods to improve weathering rates will be necessary for this practice to scale in a meaningful way. Multi‐carbon pool measurements revealed not only how co‐application of soil amendments heightened net carbon benefits, but also how soil amendments complemented each other to produce net benefits for soil carbon, biomass growth, and greenhouse gas emission reductions. Anthony et al. (2025, https://doi.org/10.1029/2024AV001480 ) produce new insights toward our understanding of enhanced weathering as well as introduce paths for future research concerning combined amendment applications, synergistic mechanisms for carbon storage, and deployment in various agricultural contexts. While questions remain about the fate of weathering products in arid regions, Anthony et al. (2025, https://doi.org/10.1029/2024AV001480 ) present novel findings on the potential for significant weathering to occur even under suboptimal conditions.

Almaraz, Maya [Yale Center for Natural Carbon Capt↗
DOE OSTI2026

Measuring impacts of California agri-environmental programs using field-scale satellite data

In the past decade, California has invested over $\$$200 million in direct grants to growers to support the adoption of agricultural practices that save water and/or improve soil health while also reducing greenhouse gas emissions. Ex-post evaluation of agri-environmental outcomes of these grant programs, however, is limited. We use satellite data to monitor changes in field-level consumptive water use and greenness (i.e. normalized difference vegetation index), a proxy for agricultural productivity, for the most frequently funded crop-types (almonds, grapes, and walnuts) in two California Department of Food and Agriculture programs. Nearly 600 fields receiving funding during the 2014–2022 period were analyzed using two causal inference methods. Fields that received grants to both upgrade irrigation systems and install irrigation water management sensors showed reduced consumptive water use and greenness by an average of 3.5% and 4.2%, respectively (significant at the 10% level). In contrast, we find that the adoption of only irrigation water management sensors, which are designed to inform irrigation scheduling and management, resulted in an average increase of 4.1% and 4.8% in consumptive water use and greenness respectively (significant at the 5% level). We find negligible effects for either consumptive water use or greenness when both pump efficiency upgrades and sensors were implemented. We further find that grants for compost addition and cover cropping led to small greenness increases of 1.7% and 2.8% respectively (significant at the 10% level) and had insignificant effects on consumptive water use. Our analysis of five agri-environmental program interventions reveals that several practice outcomes may be at odds with stated program goals of reducing water use while maintaining or improving agricultural productivity.

agriculture↗
DOE OSTI2025

Structural features of xylan dictate reactivity and functionalization potential for bio-based materials

Plant-based materials have the potential to replace some petroleum-based products, offering compostability and biodegradability as critical advantages. Xylan-rich biomass sources are gaining recognition due to their abundance and underutilization in current industrial applications. Research of potential xylan applications has been complicated by the complex and heterogeneous structure that varies for different xylan feedstocks. Acylation is a broadly used reaction in functionalization of polysaccharides at an industrial scale. However, the efficiency of this reaction varies with the xylan source. To optimize xylan valorization, a systematic understanding of structure–reactivity relationships is essential. This study explores, characterizes, and compares various xylan feedstocks in the acylation process. Xylan feedstocks were analyzed for their chemical composition, degree of polymerization, branching, solubility, and presence of impurities. These features were correlated with xylan glycotypes’ reactivity toward functionalization with succinic anhydride in an optimized DMSO/KOH condition, achieving carboxyl contents of up to 1.46. We used principal component analysis and hierarchical clustering to identify key structural features of xylan that promote its reactivity. Our findings reveal that xylans with higher xylose content and lower degrees of branching exhibit enhanced reactivity, achieving higher carboxyl content and yields. Structural analyses confirmed successful modification, and light scattering analyses showed dramatic changes in the solution properties. Succinylation improves the solubility and film-forming properties of native xylans. This study shows key structure–reactivity relationships in xylan succinylation, establishing that low branching, high xylose content, and reduced lignin impurity enhance chemical functionalization. The results offer a framework for selecting optimal biomass feedstocks and support future efforts in genetic and synthetic biology to design plants with tunable xylan architectures. These findings advance the hemicellulose valorization for applications in coatings and packaging.

Acylation↗
DOE OSTI2025

Sustainable Polymer for Polyolefin Replacement (CRADA Final Report)

Sustainable Chemicals, LLC (Participant, Sust-Chem) develops renewable, biodegradable bioplastics for the replacement of large-volume petrochemical plastics such as polyethylene (PE) and polypropylene (PP). Participant’s patented bioplastics will find use in everyday items such as plastic bags, flexible containers, packaging, and toys and will address customers' ask for goods that are sustainable but don't cost a premium. Participants’ plastic comes from plant biomass and at the end of its lifecycle, is compostable or chemically recyclable. During the CRADA, Participant and Contractor will jointly refine the polymerization process used to make our bioplastic. Participant and Contractor will focus on technologies that are economically and industrially feasible, complete with full polymer characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Production of high-performance biodegradable polyurethane products made from algae precursors

We successfully developed and scaled the production of high-performance, fully biodegradable thermoplastic polyurethanes (TPUs) derived from algae-based precursors. By employing innovative flow chemistry and chemo-enzymatic methodologies, the research team produced materials with up to 100% bio-based content that match or exceed the mechanical properties of traditional petroleum-based plastics. These algae-derived TPUs were proven to be fully home-compostable, achieving over 90% decomposition within 110 to 120 days while demonstrating practical advantages such as reduced solvent requirements in fabric coating applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Data Mining of Groundwater to Identify MAGs with Methane, Propane and Toluene Monooxygenases

Whole genome sequencing datasets, involving more than 600 groundwater samples, from nine countries, were analyzed to identify metagenome assembled genomes (MAGs) containing full operons for propane monooxygenase, soluble methane monooxygease, toluene monooxygenase and particulate ammonia/methane monooxygenase. The enzymes encoded by these genes are a focus of interest because of their ability to degrade common groundwater contaminants. Due to the large amount of data, sequence analyses involved more than 80 individual KBase narratives. The approach followed the KBase tutorial called "Metagenome-Assembled Genome Extraction from a Compost Microbiome Enrichment" The generated MAGs were exported from each individual narrative into separate summary KBase narratives for each monooxygenase. Three KBase narratives were generated for particulate ammonia/methane monooxygenase, due to the large number of MAGs identified.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Circular Perspective for Utilization of Industrial Wastewaters via Phytoremediation

Wastewater generated in municipal rendering facilities requires multi-step treatment, but it may also serve as a source of nutrients and water and thus may be valorized before or instead of the necessary wastewater treatment operations. In this work, wastewaters from a composting plant were utilized to support the growth of Miscanthus x giganteus, known as both a remediation plant and an energy biomass source. A pot experiment was established to compare the effects of different wastewater doses (0, 50, 100, and 200 mL per pot per week) on the miscanthus biomass yield, phytoextraction of heavy metals, biomass heat of combustion, and plant condition. The increase in the wastewater dose resulted in increases in both biomass yield (from about 44 to 139%) and biomass heat of combustion (from 7 to 17%) when compared to the control sample, with no adverse effects on plant physiological parameters. The highest concentrations of metals were found in miscanthus grown with the highest dose of wastewaters. It was found that higher wastewater dose correlates to both higher phytoextraction and phytorecovery of metals from plant substrate and wastewaters. The highest metal uptake was identified for Fe (431 mg·pot −1 ), followed by Al, Zn, Mn, Cu, Ni, Cr. The lowest metal uptake was noted for Pb, Co and Cd (0.88, 0.11, and 0.95 mg·pot −1 , respectively). The results indicate that miscanthus can be recommended for industrial wastewater treatment. In addition, due to high absorption efficiency of the substrate components, miscanthus can be used as a remediation tool, e.g., for the ecological stabilization of remediation of metal-polluted soils, especially in municipal facilities like rendering plants. This presents a circular perspective for the valorization of post-fermentation wastewaters with subsequent growth of energy crops, with other potential benefits for the environment, such as soil treatment, absorption of CO 2 , and air purification.

Miscanthus x giganteus↗
DOE OSTI2026

Municipal Pay-As-You-Throw (PAYT) Programs: Economic Benefits, Limitations, and Best Practices

Pay-as-you-throw (PAYT), also known as unit pricing or variable rate pricing, is a solid waste management system where customers pay for waste collection based on the volume or weight of waste they discard. By linking costs directly to waste generation, PAYT encourages customers to reduce waste through recycling, composting, and source reduction. This approach could support key waste management goals such as waste reduction, increased recycling, and controlling disposal costs. PAYT programs are flexible and can be customized to community needs. When implemented effectively, PAYT may also generate dedicated funding for waste services, enhancing program sustainability and stability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗