Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “color centers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Measuring Two Key Parameters of H3 Color Centers in Diamond

A method of measuring two key parameters of H3 color centers in diamond has been created as part of a continuing effort to develop tunable, continuous-wave, visible lasers that would utilize diamond as the lasing medium. (An H3 color center in a diamond crystal lattice comprises two nitrogen atoms substituted for two carbon atoms bonded to a third carbon atom. H3 color centers can be induced artificially; they also occur naturally. If present in sufficient density, they impart a yellow hue.) The method may also be applicable to the corresponding parameters of other candidate lasing media. One of the parameters is the number density of color centers, which is needed for designing an efficient laser. The other parameter is an optical-absorption cross section, which, as explained below, is needed for determining the number density. The present method represents an improvement over prior methods in which optical-absorption measurements have been used to determine absorption cross sections or number densities. Heretofore, in order to determine a number density from such measurements, it has been necessary to know the applicable absorption cross section; alternatively, to determine the absorption cross section from such measurements, it has been necessary to know the number density. If, as in this case, both the number density and the absorption cross section are initially unknown, then it is impossible to determine either parameter in the absence of additional information.

Roberts, W. Thomas↗
NASA NTRS1976

Studies on color-center formation in glass utilizing measurements made during 1 to 3 MeV electron irradiation

The coloring of NBS 710 glass was studied using a facility for making optical absorption measurements during and after electron irradiation. The induced absorption contains three Gaussian shaped bands. The color center growth curves contain two saturating exponential and one linear components. After irradiation the coloring decays can be described by three decreasing exponentials. At room temperature both the coloring curve plateau and coloring rate increases with increasing dose rate. Coloring measurements made at fixed dose rate but at increasing temperature indicate: (1) The coloring curve plateau decreases with increasing temperature and coloring is barely measurable near 400 C. (2) The plateau is reached more rapidly as the temperature increases. (3) The decay occurring after irradiation cannot be described by Arrhenius kinetics. At each temperature the coloring can be explained by simple kinetics. The temperature dependence of the decay can be explained if it is assumed that the thermal untrapping is controlled by a distribution of activation energies.

Swyler, K. J.↗
NASA NTRS1971

Impurity color centers in quartz and trapped electron dating - Electron spin resonance, thermoluminescence studies.

Investigation of impurity-related electron-hole traps that are known to be sensitive to ionizing radiations. Electron spin resonance (ESR) equivalent natural doses were determined for the Al hole trap in virgin specimens; the doses agreed with estimates based on published data for the Ge electron trap. The 0.17 deg/sec 180 and 300 C thermoluminescence (TL) peaks in natural specimens were found to have activation energies approximately correct for the Ge trap. The 300 C peak was also found to be correlated with annealing of the Ge electron resonance in gamma-irradiated, step-annealed specimens. Although the 300 C peak occurs in virgin specimens, the corresponding natural Ge electron resonance was not observed.

Mcmorris, D. W.↗
NASA NTRS2012

Searching for Organics Preserved in 4.5 Billion Year Old Salt

Our understanding of early solar system fluids took a dramatic turn a decade ago with the discovery of fluid inclusion-bearing halite (NaCl) crystals in the matrix of two freshly fallen brecciated H chondrite falls, Monahans and Zag. Both meteorites are regolith breccias, and contain xenolithic halite (and minor admixed sylvite -- KCl, crystals in their regolith lithologies. The halites are purple to dark blue, due to the presence of color centers (electrons in anion vacancies) which slowly accumulated as 40K (in sylvite) decayed over billions of years. The halites were dated by K-Ar, Rb-Sr and I-Xe systematics to be 4.5 billion years old. The "blue" halites were a fantastic discovery for the following reasons: (1) Halite+sylvite can be dated (K is in sylvite and will substitute for Na in halite, Rb substitutes in halite for Na, and I substitutes for Cl). (2) The blue color is lost if the halite dissolves on Earth and reprecipitates (because the newly-formed halite has no color centers), so the color serves as a "freshness" or pristinity indicator. (3) Halite frequently contains aqueous fluid inclusions. (4) Halite contains no structural oxygen, carbon or hydrogen, making them ideal materials to measure these isotopic systems in any fluid inclusions. (5) It is possible to directly measure fluid inclusion formation temperatures, and thus directly measure the temperature of the mineralizing aqueous fluid. In addition to these two ordinary chondrites halite grains have been reliably reported in several ureilites, an additional ordinary chondrite (Jilin), and in the carbonaceous chondrite (Murchison), although these reports were unfortunately not taken seriously. We have lately found additional fluid inclusions in carbonates in several additional carbonaceous chondrites. Meteoritic aqueous fluid inclusions are apparently relatively widespread in meteorites, though very small and thus difficult to analyze.

Zolensky, Michael E.↗
NASA NTRS1996

Theory Of Radiation-Induced Attenuation In Optical Fibers

Improved theory of radiation-induced attenuation of light in optical fibers accounts for effects of dose rates. Based on kinetic aspects of fundamental physics of color centers induced in optical fibers by radiation. Induced attenuation is proportional to density of color centers, and part of this density decays by thermal-annealing/recombination process after irradiation.

Liu, Tsuen-Hsi↗
NASA NTRS1993

Kinetics of the Reaction C2H + O2 from 193 to 350 K Using Laser Flash Kinetic Infrared Absorption Spectroscopy

Rate coefficients for the reaction C2H + O2 are measured from 193 to 350 K by using transient absorption spectroscopy with an infrared color center laser. Ethynyl radicals are produced by pulsed laser photolysis of C2H2 in a temperature variable flow cell and a tunable color center laser probes the transient removal Of C2H ((bar-X(sup 2))Sigma(+))(0,0,0)) in absorption. The rate coefficient has a slight negative temperature dependence over the range 193-350 K which can be expressed as k(O2) = (1.5 +/- 0.3) x 10(exp -11) exp((230 +/- 36)/T) Cu cm/(Molecule.s). The lack of a pressure dependence under our experimental conditions strongly suggests that the HCCOO* complex is short lived with respect to encountering a collision and rapidly dissociates to products without competition from collisional stabilization to HCCOO or collisionally induced dissociation to reactants.

Opansky, Brian J.↗
NASA NTRS1972

Improved magnesia for thermal control coatings

Formation of radiation-generated color centers using single crystals of magnesium oxide is discussed. Crystal structure of magnesium oxide is described. Chemical processes used to produce magnesium oxide with desired color center kinetics are presented. Proton irradiation of magnesium oxide crystals was conducted to determine lattice defects.

Levin, H.↗
NASA NTRS1995

Spectroscopic Investigation of Ce(3+) Doped Fluoride Crystals

Doping of the trivalent rare-earth cerium ion into fluoride crystals is of interest in producing turnable ultra-violet solid state lasers. These lasers are desirable for many applications in medicine, industry, and scientific research, including remote sensing. High absorption and stimulated emission cross sections of the dipole allowed 4f-5d transitions show promise in cerium as a laser ion in crystals. Several research groups have already reported the observation of stimulated emission of cerium in LiYF4, LiSrAlF6, and LiCaAlF6. However, the color center formation in the crystals due to the excited state absorption of ultra-violet pump light adds difficulty to achieving laser action. We have investigated the spectroscopic properties of cerium such as absorption and emission spectra, and lifetimes in four different fluoride crystals, including LiCaAlF6, LiSrAlF6, KyF4 and LiYF4. We have derived the polarized absorption and stimulated emission cross sections from transmission and fluorescence emission measurements for each of the host crystals. we have measured the lifetime of the lowest 5d level; moreover, investigated the temperature dependence of this lifetime and color center formation. Our results on absorption and stimulated emission cross sections for LiCaAlF6 and LiSrAlF6 are similar to the results already published.

Reinhart, Donald H.↗
NASA NTRS1993

Metallicity gradients in early-type galaxies

A study of medium-to-bright early-type galaxies in six bandpasses from 3500 A to 2.2 microns is presented in order to quantify their colors and color gradients and relate these to metallicity and properties of the underlying stellar population. The Stromgren filter system chosen makes it possible to introduce a new calibration to the Mg(2) system from the present narrow-band v - y indices. A comparison is presented of narrow-band colors centered on particular spectral features vs a color dominated by the mean temperature of the giant branch (i.e., J - K) to test the effects of light vs heavy element abundances on knowledge of the total system metallicity, Z, and the effects of reddening. A good correlation is found between v - y and Mg(2); it provides a connection between one light element metallicity indicator (v - y centers on the CN blend) and another, Mg. The color-magnitude relations for all five optical and near-IR colors are shown. The strongest correlation exists for the metallicity colors, v - y and J - K.

Schombert, James M.↗
NASA NTRS2008

In-Field Diffuse Ultraviolet Spectroscopy and Imaging of the Stardust Sample Return Capsule

In-field diffuse Ultraviolet (UV) spectroscopy and imaging systems were developed for the purposes of evaluating the surface chemical composition of spacecraft thermal control coatings and materials. The investigation of these systems and the compilation of an associated UV reflectance and luminescence database were conducted using the Stardust Sample Return Capsule (SRC), located at the Johnson Space Center. Spectral responses of the surfaces of the Stardust forebody and aftbody in both reflectance and fluorescence modes were examined post-flight. In this paper, we report on two primary findings of in-field diffuse UV spectroscopy and imaging: (1) deduction of the thermal history of thermal control coatings of the forebody and (2) bond line variations in the aftbody. In the forebody, the thermal history of thermal control coatings may be deduced from the presence of particular semiconducting defect states associated with ZnO, a common emissivity constituent in thermal control coatings. A spatial dependence of this history was mapped for these regions. In the aftbody, luminescing defect states, associated with Si and SiO2 color centers were found along regions of bond variability.

Pugel, D. Elizabeth↗
NASA NTRS1967

Enhanced luminance of the moon.

Lunar surface luminance transient enhancement noting photoabsorbing color center formation, increased reflectivity and photoluminescence, photoionization and photoemission

LUNAR LUMINESCENCE↗