Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clean water”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Leveraging State Clean Water Revolving Funds to Expand Clean Energy Financing

To meet clean energy goals, states will need significant capital. Federal funding from the Inflation Reduction Act and the Infrastructure Investment and Jobs Act will help, including by capitalizing clean energy state revolving loan funds (RLFs). States can leverage state clean water revolving funds to finance even more clean energy improvements. New York and Pennsylvania have used this innovative mechanism to extend the impact of their clean energy loan programs. For states looking to extend the reach of their clean energy financing programs, the brief: -Explains how each state leveraged their state revolving funds, -Identifies critical success factors for doing so, and -Offers key elements for replicating this model In New York, New York State Energy Research and Development Authority structured a sale of bonds secured by the repayments from a portfolio of residential energy efficiency loans from its Green Jobs – Green New York Program, with the additional support of a guarantee from the state’s clean water revolving fund. The Pennsylvania Treasury Department received a direct investment of funds from Pennsylvania’s clean water revolving fund to support the relaunch of the Keystone Home Energy Loan Program (HELP), which had previously been shuttered due to lack of support funding. From our review of these two case studies, when facilitating state clean water revolving fund transactions to support clean energy lending, the following critical success factors emerged: -Reference to preventing atmospheric deposition resulting from the combustion of fossil fuels in the state’s Clean Water Act Section 319 Nonpoint Source Pollution Management Plan, which sets out that state’s strategy for reducing pollution into state waterways. -Strong relationships and trust between the clean water revolving fund administrator and the state agency administering the clean energy loan program. -Limited funding exposure for the clean water revolving funds—which are generally large and well capitalized—to ensure that any losses experienced by clean water revolving funds would have a negligible impact on the fund’s ability to support core water and wastewater projects. -Willingness, on the part of the clean water revolving fund administrator, to innovate and engage in careful analysis to support transaction structuring, and support from state energy partner organizations. The brief provides case studies of these states’ experiences, critical success factors, and key elements for replicating the model.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2012

Separations Technology for Clean Water and Energy

Providing clean water and energy for about nine billion people on the earth by midcentury is a daunting challenge. Major investments in efficiency of energy and water use and deployment of all economical energy sources will be needed. Separations technology has an important role to play in producing both clean energy and water. Some examples are carbon dioxide capture and sequestration from fossil energy power plants and advanced nuclear fuel cycle scemes. Membrane separations systems are under development to improve the economics of carbon capture that would be required at a huge scale. For nuclear fuel cycles, only the PUREX liquid-liquid extraction process has been deployed on a large scale to recover uranium and plutonium from used fuel. Most current R and D on separations technology for used nuclear fuel focuses on ehhancements to a PUREX-type plant to recover the minor actinides (neptunium, americiu, and curium) and more efficiently disposition the fission products. Are there more efficient routes to recycle the actinides on the horizon? Some new approaches and barriers to development will be briefly reviewed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

An overview of the evolving jurisdictional scope of the U.S. Clean Water Act for hydrologists

Abstract The Clean Water Act (CWA) is the primary federal mechanism by which the physical, chemical, and biological integrity of streams, lakes, and wetlands are protected in the United States. The CWA has evolved considerably since its initial passage in 1948, including explicit expansions and contractions of jurisdictional scope through a series of legislative actions, court decisions, and agency rules. Here, we provide a practical summary of the CWA's evolution, detailing the major updates or revisions and their circumstances. Additionally, we identify the jurisdictional scope of the law for rivers and streams, lakes, and wetlands based on the language used and implementation by the agencies during the same time period. While the rulemaking process commonly uses language that will be abstract to many hydrologists, understanding the on‐the‐ground implications, quantifying regulatory (un)certainties, and assessing the magnitude of changes through time is important to understanding the implications of environmental regulation development, litigation, and enforcement. Thus, we translate the enforcement norms and definitions into quantitative estimates for Clean Water Act scope in the Wabash River Basin (Illinois, Indiana, and Ohio, USA) as a demonstration of the spatial consequences of changing regulatory language. This article is categorized under: Engineering Water > Planning Water Human Water > Water Governance Water and Life > Conservation, Management, and Awareness

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2017

Water Cleaning System for the Exhaust Pipe of HLW Glass Melter (LFCM) - 17180

Vitrification technology has been generally applied to stabilize High-Level Radioactive Waste (HLW) generated from spent fuel reprocessing. In Japan, Joule Heated Liquid Fed Ceramic Melter (LFCM) system is selected for HLW vitrification and the recent active test has been successfully demonstrated its stable operation. The higher reliability of off-gas treatment system (OGTS) which consists of wet scrubber, absorbers and filters connected to the LFCM is also important to ensure long term system operation. The OGTS removes radioactive gases, mists and dust generated by LFCM and maintains radioactive containments by keeping negative pressure inside. In the past active and inactive tests, it was observed that differential pressure in the exhaust pipe attached to LFCM gradually increased during continuous operation and some deposits were observed inside the off-gas pipe. So the cleaning operation needs to be improved and more frequent in order to avoid the exhaust pipe clogging. Therefore we investigated several cleaning systems and operational methods for the exhaust pipe of LFCM. As a result, we have successfully developed the modified water cleaning system. In this presentation we will introduce our water cleaning system. In addition, we will present the result of inactive mock-up tests for the visualization of this water cleaning system. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1995

Evaluation of pressurized water cleaning systems for hardware refurbishment

Historically, refurbishment processes for RSRM motor cases and components have employed environmentally harmful materials. Specifically, vapor degreasing processes consume and emit large amounts of ozone depleting compounds. This program evaluates the use of pressurized water cleaning systems as a replacement for the vapor degreasing process. Tests have been conducted to determine if high pressure water washing, without any form of additive cleaner, is a viable candidate for replacing vapor degreasing processes. This paper discusses the findings thus far of Engineering Test Plan - 1168 (ETP-1168), 'Evaluation of Pressurized Water Cleaning Systems for Hardware Refurbishment.'

Dillard, Terry W.↗
DOE OSTI2021

Controlled dehumidification to extract clean water from a multicomponent gaseous mixture of organic contaminants

Rapid expansion of the unconventional oil and gas extraction has increased American energy independence, but also led to increased production of large amounts of contaminated water. Wastewater from the oil and gas industry contains a wide range of contaminants. Injecting such contaminated water into disposal wells or discharging it to the environment jeopardizes freshwater resources. Conventional and membrane-based wastewater treatment techniques are often not effective choices to treat highly contaminated wastewater; however, a suitable way to remove contaminants from wastewater is to selectively separate water in a process analogous to humidification-dehumidification (HDH). Only a few studies have investigated the use of HDH for wastewater treatment. In this study, a novel HDH system is introduced for treating highly contaminated water, such as oil and gas flowback and produced water. In this HDH process, a non-condensable gas, such as air, mixes with wastewater vapor to facilitate the separation of contaminants. As a result, clean water condenses from the multicomponent gaseous mixture while air carries organic contaminants out of the dehumidification section. A laboratory apparatus was constructed and experiments were performed to investigate the HDH process for wastewater treatment and to study the effects of flow dynamics including air flow rate on the composition of treated water. Different contaminants including benzene, toluene, 2-propanol and 2-butoxyethanol were tested. Experimental results showed that the system can be successfully applied for removing volatile and/or toxic organic contaminants from wastewater. A representative multicomponent mixture of fracking wastewater was successfully treated using the experimental setup and clean water with quality of 98.3% was obtained. It was revealed that increasing the air-to-vapor mass ratio improves purity of treated water. Quantitative analysis showed that by increasing the air-to-vapor mass ratio from 0.6 to 5.9, the fraction of separated 2-propanol through the air was improved from 43% to more than 96% of the initial amount. ASPEN software was employed to simulate equilibrium conditions. Finally, experimental results were observed to have lower mass fraction of residual contaminant in the treated water compared to equilibrium state.

42 ENGINEERING↗
DOE OSTI2025

Clean Water Production in Cooling Towers

This project developed and demonstrated a novel technology that produces clean water from cooling tower recirculating water by using the natural evaporation and condensation cycle inside cooling towers. The system captures the escaping plume and converts blowdown quality water into high purity water suitable for on-site reuse such as boiler feed. The technology uses electric fields to ionize exhaust plumes, charge the entrained droplets, and direct them toward collection electrodes where they coalesce and flow downward. This allows water recovery at a low energy cost while reducing visible plume emissions. In addition, we developed a complementary software platform that improves overall cooling tower performance. The system uses wireless sensors and physics-based machine learning algorithms to optimize key parameters of the cooling process. For power generation facilities, this increases the thermal efficiency of the cooling loop and condenser, resulting in measurable cycle efficiency gains. Improvements of one percent or more can deliver significant increases in electricity production for the same fuel input.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2018

Advanced Manufacturing Office Clean Water Processing Technologies: Workshop Series Summary Report

The U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) held a series of three clean water processing technologies workshops focusing on technical challenges and opportunities. The first workshop focused on energy optimized desalination technology development and was held in San Francisco on Nov. 5th and 6th, 2015 at the Hilton San Francisco Union Square. The next two occurred in summer 2017 starting with a workshop held in Dallas, Texas at the Hilton Dallas Lincoln Centre on July 10th and 11th, 2017 followed by the third workshop in Cleveland, Ohio at the Wyndham Cleveland at Playhouse Square on August 23rd and 24th, 2017. Below is a high level summary of scope and outcomes from each workshop.

42 ENGINEERING↗
DOE OSTI2015

Chicago Clean Air, Clean Water Project: Environmental Monitoring for a Healthy, Sustainable Urban Future

The U.S. Department of Energy awarded Loyola University Chicago and the Institute of Environmental Sustainability (IES) $486,000.00 for the proposal entitled “Chicago clean air, clean water project: Environmental monitoring for a healthy, sustainable urban future.” The project supported the purchase of analytical instruments for the development of an environmental analytical laboratory. The analytical laboratory is designed to support the testing of field water and soil samples for nutrients, industrial pollutants, heavy metals, and agricultural toxins, with special emphasis on testing Chicago regional soils and water affected by coal-based industry. Since the award was made in 2010, the IES has been launched (fall 2013), and the IES acquired a new state-of-the-art research and education facility on Loyola University Chicago’s Lakeshore campus. Two labs were included in the research and education facility. The second floor lab is the Ecology Laboratory where lab experiments and analyses are conducted on soil, plant, and water samples. The third floor lab is the Environmental Toxicology Lab where lab experiments on environmental toxins are conducted, as well as analytical tests conducted on water, soil, and plants. On the south end of the Environmental Toxicology Lab is the analytical instrumentation collection purchased from the present DOE grant, which is overseen by a full time Analytical Chemist (hired January 2016), who maintains the instruments, conducts analyses on samples, and helps to train faculty and undergraduate and graduate student researchers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2013

Ultra Pure Water Cleaning Baseline Study on NASA JSC Astromaterial Curation Gloveboxes

Future sample return missions will require strict protocols and procedures for reducing inorganic and organic contamination in isolation containment systems. In 2012, a baseline study was orchestrated to establish the current state of organic cleanliness in gloveboxes used by NASA JSC astromaterials curation labs [1, 2]. As part of this in-depth organic study, the current curatorial technical support procedure (TSP) 23 was used for cleaning the gloveboxes with ultra pure water (UPW) [3-5]. Particle counts and identification were obtained that could be used as a benchmark for future mission designs that require glovebox decontamination. The UPW baseline study demonstrates that TSP 23 works well for gloveboxes that have been thoroughly degreased. However, TSP 23 could be augmented to provide even better glovebox decontamination. JSC 03243 could be used as a starting point for further investigating optimal cleaning techniques and procedures. DuPont Vertrel XF or other chemical substitutes to replace Freon- 113, mechanical scrubbing, and newer technology could be used to enhance glovebox cleanliness in addition to high purity UPW final rinsing. Future sample return missions will significantly benefit from further cleaning studies to reduce inorganic and organic contamination.

Calaway, Michael J.↗
NASA NTRS1988

Food-Growing, Air- And Water-Cleaning Module

Apparatus produces fresh vegetables and removes pollutants from air. Hydroponic apparatus performs dual function of growing fresh vegetables and purifying air and water. Leafy vegetables rooted in granular growth medium grow in light of fluorescent lamps. Air flowing over leaves supplies carbon dioxide and receives fresh oxygen from them. Adaptable to production of food and cleaning of air and water in closed environments as in underwater research stations and submarines.

Sauer, R. L.↗
NASA NTRS1995

An Innovation for Global Clean Water

Under contract to NASA, Umpqua Research developed the Microbial Check Valve (MCV) iodine-dispensing system for the Space Shuttle Orbiter, introduced in 1979 to purify astronauts' drinking water. In 1989, NASA awarded the company a new contract to develop a system for continuous iodine release over long periods for use in the International Space Station. In 1993, the company demonstrated the Regenerable Biocide Delivery Unit, and NASA granted it an exclusive license.

Source record↗
NASA NTRS2006

Clean Water for Remote Locations

Marshall Space Flight Center engineers are working on creating the Regenerative Environmental Control and Life Support System, a complex system of devices intended to sustain the astronauts living on the ISS and, in the future, sustain those who are blasting off to the Moon or Mars. The devices make use of the available resources, by turning wastewater from respiration, sweat, and urine into drinkable water. One of the devices that Marshall has been working on is the Water Recovery System (WRS). Marshall has teamed with long-time NASA contractor, Hamilton Sundstrand Space Systems International, Inc., of Windsor Locks, Connecticut. Hamilton Sundstrand, the original designer of the life support devices for the space suits, developed the Water Processor Assembly (WPA). It, along with the Urine Processor Assembly (UPA) developed by Marshall, combines to make up the total system, which is about the size of two refrigerators, and will support up to a six-member crew. The system is currently undergoing final testing and verification. "The Water Processor Assembly can produce up to about 28 gallons of potable recycled water each day," said Bob Bagdigian, Marshall Regenerative Environmental Control and Life Support System project manager. After the new systems are installed, annual delivered water to the ISS should decrease by approximately 15,960 pounds, or about 1,600 gallons.

Source record↗