Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “clay cap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Implications of rootless geothermal models: Missing processes, parameter compensation, and imposter convection

Numerical models of geothermal systems commonly capture only the top of a reservoir. Deeper areas of the reservoir are simplified to a boundary at the base of the model domain. Commonly, the basal boundary is given either a heat source or a source of mass and enthalpy. Here we developed and present simple numerical experiments which demonstrate that these approaches do not produce the correct model behavior in comparison to a model that captures the entire convecting domain with a heat flux only. We describe a variety of incorrect types of model behavior that arise directly from the choice of boundary condition, independent of the specific parameterization of the model. Heat sources are sensitive to the thickness of the domain and parameters take unphysical values to compensate for the reduced height. The combined mass/heat boundary can produce temperatures that show similarities to circulating geothermal systems, but with incorrect fluid flow and a strong boundary layer focused at the base of the simulated clay cap. These errors likely cause parameters to adjust their values to compensate for the incorrect physics. We highlight these issues and show an example from a developed reservoir model. Initial calibrations to natural state temperature were unsuitable for history matching. The 3D model required parameter adjustments to achieve a more realistic production model. Appropriate mitigation measures should be considered to reduce parameter compensation and improve decision-support models.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

An integrated EOS, pore‐crush, strength and damage model framework for near‐field ground‐shock

Abstract An integrated Equation of State (EOS) and strength/pore‐crush/damage model framework is provided for modeling near to source (near‐field) ground‐shock response, where large deformations and pressures necessitate coupling EOS with pressure‐dependent plastic yield and damage. Nonlinear pressure‐dependence of strength up to high‐pressures is combined with a Modified Cam‐Clay‐like cap‐plasticity model in a way to allow degradation of strength from pore‐crush damage, what we call the “Yp‐Cap” model. Nonlinear hardening under compaction allows modeling the crush‐out of pores in combination with a fully saturated EOS, that is, for modeling partially saturated ground‐shock response, where air‐filled voids crush. Attention is given to algorithmic clarity and efficiency of the provided model, and the model is employed in example numerical simulations, including finite element simulations of underground explosions to exemplify its robustness and utility.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Basin and Range Investigation for Developing Geothermal Energy: Exploration Data

This data package includes exploration material from the Basin & Range Investigation for Developing Geothermal Energy [in Hidden Systems] project (BRIDGE), which is part of a broader initiative to advance the exploration of hidden geothermal resources in the Basin & Range Province of the western U.S. Data modalities include a helicopter-borne time-domain electromagnetic survey, magnetotellurics, 2-meter temperature measurements, ground-based gravity and legacy aeromagnetic surveys, geochemistry, geologic mapping, LiDAR analysis, 3D models, associated geospatial data, and a bibliography of existing data and references utilized in prospect characterization and conceptual modeling. Key files are in CSV, Geosoft, and Geotools formats. Please refer to READMEs for dataset-specific information. Where applicable, acquisition data and inversion models for a particular prospect or area of interest are organized separately. This BRIDGE data package is the product of a collaboration led by Sandia National Laboratories with partners from Geologica Geothermal Group, Inc., the U.S. Navy Geothermal Program Office, and consultants Steven Sewell (Australis Geoscience Ltd) and William Cumming (Cumming Geoscience). The project's areas of interest (AOIs) are based off priority areas of interest in the southwestern portion of the Nevada Play Fairway map, distribution across tectonic provinces, accessibility, and the project team's extensive experience in the region. AOIs cover about a dozen basins that include unexplored prospects, partially explored prospects, and some developed analogue resources that provide validation cases. Many unexplored and partially explored prospects are on U.S. Department of Defense (DoD) land, though adjacent lands are included as well.

15 GEOTHERMAL ENERGY↗
NASA NTRS1979

Mars - CO2 adsorption and capillary condensation on clays: Significance for volatile storage and atmospheric history

Results on the adsorbate-adsorbent system CO2-nontronite are reported at 230, 196, and 158 deg K, covering the range of subsurface regolith temperature on Mars. A three-part regolith-atmosphere-cap model reveals that cold nontronite, and expanding clays in general, are far better but far more complex CO2 adsorbers than cold pulverized basalt. In addition, the layered terrain, and possibly the adjacent debris mantle, contains about 2% or more by mass of atmosphere-exchangeable CO2 and the total regolith inventory of available adsorbed CO2 is estimated to be 400 g/ sq cm.

Fanale, F. P.↗
NASA NTRS1982

Seasonal carbon dioxide exchange between the regolith and atmosphere of Mars - Experimental and theoretical studies

CO2 penetration rate measurements have been made through basalt-clay soils under conditions simulating the penetration of the cap-induced seasonal CO2 pressure wave through the topmost regolith of Mars, and results suggest that existing theoretical models for the diffusion of a gas through a porous and highly adsorbing medium may be used to assess the importance of the Martian seasonal regolith-atmosphere CO2 exchange. The maximum effect of thermally driven exchange between the topmost seasonally (thermally) affected regolith and the atmosphere shows that, while this may be of greater importance than the isothermal exchange, the thermally driven exchange would be recognizable only if the pressure wave from CO2 exchanged at high latitudes did not propagate atmospherically faster than the rate at which the exchange itself occurred. This is an unreasonable assumption.

Fanale, F. P.↗
NASA NTRS1985

Spectroscopic observation of Mars

A review is given of what is known about the surface of Mars from reflectance spectroscopy, including some new results and providing an overview of the principles involved. While some form of bound water and/or OH has been known on Mars for many years, a new result presented is the identification of structural OH in a dilute or poorly crystalline magnesian clay. The detection of water ice in the residual north polar cap is noted. Also considered is the role that reflectance spectroscopy will play in the future, from earth and as an important part of the NASA Mars Geosciences/Climatology Orbiter mission.

Singer, R. B.↗
DOE OSTI2024

Geothermal play fairway analysis, part 1: Example from the Snake River Plain, Idaho

The Snake River Plain (SRP) volcanic province overlies the track of the Yellowstone hotspot, a thermal anomaly that extends deep into the mantle. Most of the area is underlain by a basaltic volcanic province that overlies a mid-crustal intrusive complex, which in turn provides the long-term heat flux needed to sustain geothermal systems. Previous studies have identified several known geothermal resource areas within the SRP. For the geothermal study presented herein, our goals were to: (1) adapt the methodology of Play Fairway Analysis (PFA) for geothermal exploration to create a formal basis for its application to geothermal systems, (2) assemble relevant data for the SRP from publicly available and private sources, and (3) build a geothermal PFA model for the SRP and identify the most promising plays, using GIS-based software tools that are standard in the petroleum industry. The study focused on identifying three critical resource parameters for exploitable hydrothermal systems in the SRP: heat source, reservoir and recharge permeability, and cap or seal. Data included in the compilation for heat source were heat flow, distribution and ages of volcanic vents, groundwater temperatures, thermal springs and wells, helium isotope anomalies, and reservoir temperatures estimated using geothermometry. Reservoir and recharge permeability was inferred from the analysis of stress orientations and magnitudes, post-Miocene faults, and subsurface structural lineaments based on magnetics and gravity data. Data for cap or seal included the distribution of impermeable lake sediments and clay-seal associated with hydrothermal alteration below the regional aquifer. These data were used to compile Common Risk Segment maps for heat, permeability, and seal, which were combined to create a Composite Common Risk Segment map for all southern Idaho that reflects the risk associated with geothermal resource exploration and identifies favorable resource tracks. Our regional assessment indicated that undiscovered geothermal resources may be located in several areas of the SRP. Two of these areas, the western SRP and Camas Prairie, were selected for more detailed assessment, during which heat, permeability, and seal were evaluated using newly collected field data and smaller grid parameters to refine the location of potential resources. These higher resolution assessments illustrate the flexibility of our approach over a range of scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Fast Advective Water Flow through Nanochannels in Clay Interlayers: Implications for Moisture Transport in Soils and Unconventional Oil/Gas Production

Water flow in nanometer or sub-nanometer hydrophilic channels bears special importance in diverse fields of science and engineering. However, the nature of such water flow remains elusive. In this work, we report our molecular-modeling results on water flow in a sub-nanometer clay interlayer between two montmorillonite layers. We show that a fast advective flow can be induced by evaporation at one end of the interlayer channel, that is, a large suction pressure created by evaporation (~818 MPa) is able to drive the fast water flow through the channel (~0.88 m/s for a 46 Å-long channel). Scaled up for the pressure gradient to a 2 μm particle, the velocity of water is estimated to be about 95 μm/s, indicating that water can quickly flow through a μm-sized clay particle within seconds. The prediction seems to be confirmed by our thermogravimetric analysis of bentonite hydration and dehydration processes, which indicates that water transport at the early stage of the dehydration is a fast advective process, followed by a slow diffusion process. The possible occurrence of a fast advective water flow in clay interlayers prompts us to reassess water transport in a broad set of natural and engineered systems such as clay swelling/shrinking, moisture transport in soils, water uptake by plants, water imbibition/release in unconventional hydrocarbon reservoirs, and cap rock integrity of supercritical CO 2 storage.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1991

Water resources and hydrology of Mars

The surface of Mars has been extensively modified by a large variety of water erosional and depositional processes. Although liquid water is presently unstable on the planet's surface, in its cold, hyperarid climate, there is abundant geomorphological evidence of past fluvial valley development multiple episodes of catastrophic flooding, periglacial landforms, ice-related permafrost, lake deposits, eroded impact craters and possible glacial landforms throughout much of Mars' geological history. The amount of water required to form such features is estimated to be equivalent to a planet-wide layer approximately 50 meters deep. Some of this water undoubtedly was removed from the planet by atmospheric escape processes, but much probably remains in the subsurface of Mars. Jakosky summarized the present partitioning of water on Mars, expressed as an average global depth, as follows: in the polar caps, 30 meters; in the megaregolith, 500 to 1000 meters; structurally bound in clays, 10 meters; and in high latitude regolith, a few meters. However, most of this water is probably in the form of ice, except in anomalous areas of possible near surface liquid water, and in regions where hydrothermal systems are still active. The best locations for prospecting are those areas where water or ice is sufficiently concentrated at shallow enough depths to make it feasible to pump out or mine.

Baker, V. R.↗
NASA NTRS2020

First Gale Western Butte Capping-Unit Compositions, and Relationships to Earlier Units Along Curiosity's Traverse

The Curiosity rover has been traversing through the clay-bearing unit (Glen Torridon; GT), approaching Greenheugh pediment, a large, fan-shaped surface surrounding the mouth of Gediz Vallis on the lower slope of Mt. Sharp. The pediment unconformably overlies the underlying bedrock, and is hence younger than units of the Mt. Sharp group. Orbital imaging of the pediment has shown it to have a slightly lower albedo and higher thermal inertia than neighboring units, to be relatively retentive of craters (e.g., erosion resistant), and to exhibit curved bedforms suggestive of lithified eolian bedforms. No diagnostic spectral signature has been observed from orbit. Recent rover positions allowed remote imaging of the contact between Greenheugh pediment and the eroded Murray formation strata below it, showing that the pediment capping material is cross-bedded and relatively thin (1-3 m), and suggesting that the pediment may have been much larger at one time. As Curiosity approached the edge of the pediment, the team investigated two buttes named Central and Western. The latter butte contains dark capping material that initially looked similar to the pediment cap, but close inspection revealed important physical differences. Here we report on compositions from ChemCam of two float rocks that appear to have rolled down from the capping unit, and on potential relation-ships to other targets along the traverse of the rover.

Wiens, R. C.↗
NASA NTRS1982

Mars - The regolith-atmosphere-cap system and climate change

A model is derived for the prediction of the Martian regolith-atmosphere-cap CO2 regime's behavior, as well as for the description of the roly of the regime in climate change, through descriptions of the time-temperature histories of 90 regolith 'chunks' on a latitude-depth grid. The influence of differences in regolith adsorption laws for basalt and clay, and the influence of variations in regolith depth with (1) latitude, (2) regolith thermal diffusivity, and (3) total exchangeable CO2 inventory on predicted variations in atmospheric pressure and cap mass, are examined. It is found that the atmosphere acts as a low capacity conduit between two reservoirs through which 10-100 times the current atmospheric mass of CO2 flows. The exchange between the reservoirs is driven by obliquity variations, with the polar cap the dominant CO2 sink at low obliquity and the regolith dominating at high obliquity.

Fanale, F. P.↗
NASA NTRS2020

The Stratigraphy of Central and Western Butte and the Greenheugh Pediment Contact

The Greenheugh pediment at the base of Aeolis Mons (Mt. Sharp), which may truncate units in the Murray formation and is capped by a thin sandstone unit, appears to represent a major shift in climate history within Gale crater. The pediment appears to be an erosional remnant of potentially a much more extensive feature. Curiosity’s traverse through the southern extent of Glen Torridon (south of Vera Rubin ridge) has brought the rover in contact with several new stratigraphic units that lie beneath the pediment. These strata were visited at two outcrop-forming buttes (Central and Western butte- both remnants of the retreating pediment) south of an orbitally defined boundary marking the transition from the Fractured Clay-bearing Unit (fCU) and the fractured Intermediate Unit (fIU). Here we present preliminary interpretations of the stratigraphy within Central and Western buttes and propose the Western butte cap rocks do not match the pediment capping unit.

Bryk, A. B.↗
NASA NTRS1979

Mars surface composition from reflectance spectroscopy - A summary

Visible and near-infrared reflectance spectra and multispectral maps of the Martian surface are discussed, and implications of the data for the composition of the Martian surface are considered. Spacecraft and earth-based telescopic observations have confirmed the generally bimodal albedo distribution of the planet, dividing the surface into bright and dark regions. Mars spectra are characterized by the presence of strong Fe(+3) absorption, which is attributed to various ferric oxide minerals. Interpretations of the spectra from the dark regions indicate a basaltic or ultramafic source rock. Evidence for water ice or a highly desiccated metal hydrate has been obtained, along with evidence for CO2-ice only in the south polar cap. Mariner 9 observations of Martian dust suggest the presence of rather acidic rock or mineral particles, or a montmorillonite-type clay. Prospects for the future study of Martian surface composition include continuing earth-based spectrophotometric studies, and high-spectral-resolution mapping of a significant portion of the surface by the Galileo spacecraft and the next Mars mission.

Singer, R. B.↗
NASA NTRS1984

A possible source for the Martian circumpolar dune material

The properties of freeze dried dilute dispersions of dust in water are of considerable interest in studies of sedimentary processes in the polar regions of Mars. The formation of a rind residue due to the sublimation of water ice containing various amounts of clay may be an important step in these processes. Such phenomena may occur as the result of seasonal or long term (climatic) sublimation of dirty ice caps on Mars. The development and disruption of dust residues on the surface of ice dust mixtures as a result of preferential ice sublimation were simulated in the laboratory. The characteristics of the resulting particles are described and a scenario for the formation of a Martian circumpolar dune field is suggested.

Saunders, R. S.↗
NASA NTRS1985

Properties of Filamentary Sublimation Residues from Dispersions of Clay in Ice

The properties of sublimate residues are of considerable interest in studies of the thermal modeling of Martian and cometary ice surfaces. The study of the formation of sand grains from this mantle on Martian polar ice is also supported by these experiments. To understand these properties, a series of low temperature vacuum experiments were run during which dirty ices that might be expected to be found in Martian polar caps and in comet nuclei were made and then freeze dried. In addition to using particulate material of appropriate grain size and minerology, particle nucleated ices were simulated by dispersing the particulates in the ice so that they did not contact one another. This noncontact dispersion was the most difficult requirement to achieve but the most rewarding in that it produced a new filamentary sublimate residue that was not a relic of the frozen dispersion. If the siliceous particles are allowed to touch one another in the ice the structure of the contacting particles in the ice will remain as a relic after the ice is sublimed away.

Stephens, J. B.↗
NASA NTRS1998

Results from the Mars Global Surveyor Thermal Emission Spectrometer

The Thermal Emission Spectrometer spectra of low albedo surface materials suggests that a four to one mixture of pyroxene to plagioclase, together with about a 35 percent dust component provides the best fit to the spectrum. Qualitative upper limits can be placed on the concentration of carbonates (<10 percent), olivine (<10 percent), clay minerals (<20 percent), and quartz (<5 percent) in the limited regions observed. Limb observations in the northern hemisphere reveal low-lying dust hazes and detached water-ice clouds at altitudes up to 55 kilometers. At an aerocentric longitude of 224 degrees a major dust storm developed in the Noachis Terra region. The south polar cap retreat was similar to that observed by Viking.

unmanned↗
NASA NTRS1988

Gossans on Mars

The appearance of rusty iron-rich oxidized cappings over sulfide-bearing rocks on earth indicates that similar gossans may have formed on the surface of Mars. Electrochemical processes and thermodynamic relationships linking acidity to oxidation-reduction reactions between primary sulfide minerals and their oxidative weathering products present in the regolith of Mars are discussed. Remote-sensed visible spectra of the Martian surface are in keeping with the presence of poorly-crystalline FeOOH, jarosite, silica, and clay silicates found in gossans, while incompletely weathered pyrrhotite may represent the magnetic material observed in Martian regolith.

Burns, Roger G.↗
NASA NTRSDate not supplied

Mineralogy of the Greenheugh Pediment and Underlying Murray Formation from the Mars Science Laboratory CheMin Instrument

The Mars Science Laboratory Curiosity rover has been investigating a sequence of ancient fluvio-lacustrine and eolian units in Gale crater. For much of the mission, Curiosity has studied the fluvio-lacustrine deposits of the Murray formation. Curiosity has also studied the ancient eolian Stimson formation in a few locations, which unconformably overlies the Murray fm. The Stimson formation was previously studied at the Naukluft and Emerson Plateaus and recently studied at the Greenheugh pediment capping unit. The Curiosity science team also investigated the Murray formation directly underlying the pediment. Curiosity drilled the “Edinburgh” target within the pediment capping unit and the “Hutton” target in the Murray formation near the contact with the pediment and delivered these materials to the CheMin X-ray diffractometer to characterize bulk mineralogy. Edinburgh contains abundant plagioclase, pyroxene, magnetite, olivine, and X-ray amorphous materials, with 10 wt.% smectite and minor sanidine. The mineralogy of the Stimson at Greenheugh is distinct from the mineralogy of the Stimson at Naukluft and Emerson because previous Stimson targets did not contain olivine or clay minerals. This suggests sediments in the pediment may have a different source and/or different aqueous alteration history than those from Naukluft and Emerson. Hutton contains abundant plagioclase, pyroxene, magnetite, and X-ray amorphous materials, 6 wt.% smectite, and minor cristobalite, opal-CT, sanidine, hematite, fluorapatite, and anhydrite. Other Murray targets in the surrounding Glen Torridon region that are farther from the pediment contact contain ~30 wt.% smectite and lack cristobalite and opal-CT. Cristobalite and/or opal-CT are present in a few other targets elsewhere along the traverse, including the top of the nearby Vera Rubin ridge and the top of the Pahrump Hills outcrop. Stimson overlies the Pahrump Hills, and, based on projections of the pediment slope, the Stimson may have overlain Vera Rubin ridge. The proximity of the low-smectite and cristobalite- and/or opal-CT-bearing outcrops to the contact between the Murray and Stimson suggests the contact provided a conduit for diagenetic fluids that altered clay minerals and formed crystalline and paracrystalline silica.

E. B. Rampe↗