Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “circulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Closed Bay-Breeze Circulation and Its Lifecycle From TRACER With a New Orienteering Tape Recorder Diagram

A closed bay-breeze circulation (BBC) followed by a gulf-breeze front (GBF) was observed on 10 September 2022 during the Department of Energy's (DOE) Atmospheric Radiation Measurement (ARM) TRACER campaign. Using high-resolution X-band Scanning Cloud Radar (XSACR) and a newly developed orienteering tape recorder diagram, the study analyzed radar reflectivity and Doppler velocity to identify anomalies and track the evolution of these circulations. The BBC, a mesoscale system approximately 30-km long, 30-km wide, and 2-km deep, formed from enhanced horizontal convective rolls along the Galveston Bay coast, progressing northwestward under a 6 m s−1 onshore flow anomaly and reaching 1.5 km depth with return flow aloft. The inland penetration speed was 2 m s−1, driven by an observed 6-9 K land-water temperature contrast. The GBF, coupled to the BBC, intensified with additional southerly flow, penetrating further inland after the BBC collapsed. Passing over the TRACER field site, both fronts significantly impacted boundary layer thermodynamics, dynamics, and aerosol concentration. The BBC event exhibited four lifecycle stages-formation, development, maturation, and dissipation-driven by solar heating, wind field rotation, and interactions with convective eddies and the GBF. This study provides insights into the inland evolution of coastal breeze circulations and their interactions with environmental processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Revisiting the Role of Ocean Circulation Changes in Polar Ocean Heat Transport Anomalies under Global Warming

In response to greenhouse gas forcing, climate models predict that poleward ocean heat transport (OHT) weakens in the Southern Ocean but increases in the Arctic. The role of ocean circulation changes in this OHT response has been evaluated by decomposing OHT anomalies into a dynamic component (holding ocean temperature fixed while circulation evolves) and a thermodynamic component (holding ocean circulation fixed while temperature evolves). However, ocean temperature changes are themselves shaped by circulation changes through redistribution of the existing heat reservoir and subsequent effects on air–sea heat fluxes. The thermodynamic component can therefore be influenced by circulation changes, making the standard thermodynamic–dynamic decomposition incomplete for isolating the role of circulation changes in OHT anomalies. To address this issue, we use a passive–active decomposition to assess the relative contributions of ocean circulation and passive ocean temperature changes to polar OHT anomalies in a fully coupled climate model. Passive temperature changes are defined as those thermally forced by the atmosphere in the absence of circulation changes. In this passive–active decomposition, an advective term involving both circulation and passive temperature changes remains ambiguous—classifying it as active implies circulation changes dominate Southern Ocean OHT anomalies, whereas classifying it as passive implies temperature changes dominate. However, both interpretations imply that ocean circulation changes have a much weaker effect on polar OHT anomalies than inferred from the standard decomposition. In conclusion, these results help reconcile conclusions from studies using the standard decomposition with those using passive tracer methods to assess the role of circulation changes in polar OHT anomalies.

Arctic↗
DOE OSTI2025

Changes in atmospheric circulation amplify extreme snowfall fueled by Arctic sea ice loss over high-latitude land

Arctic sea-ice retreat has been linked to increased winter precipitation and heavy snowfall over land, likely due to a combination of enhanced evaporation from ice-free Arctic marginal seas (AMS) and changes in atmospheric circulation. However, their relative roles and contributions remain uncertain. Here, we show that a greater proportion of AMS evaporative moisture reached high-latitude land during the cold seasons from 1980–1989 to 2012–2021. Atmospheric circulation changes added an additional 13 % increase in the AMS moisture contribution, accounting for 11 % of the total increase in AMS-sourced land precipitation. Notably, 46 % of the increase in AMS-sourced extreme snowfall is attributed to circulation-driven landward moisture transport, representing an 84 % increase beyond the effect of enhanced AMS evaporation alone. Further analysis indicates that both the rise in Arctic moisture and the atmospheric circulation shifts are primarily driven by anthropogenic forcing. These findings highlight how atmospheric circulation changes amplify extreme snowfall fueled by AMS evaporation, underscoring the synergistic effects of Arctic sea ice loss and circulation change on high-latitude winter precipitation.

Anthropogenic forcing↗
DOE OSTI2025

The Role of Bedrock Circulation Depth and Porosity in Mountain Streamflow Response to Prolonged Drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi-year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage-limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Extreme Precipitation Over the Southern Slope of the Tibetan Plateau and the Associated Atmospheric Circulation Anomalies

The southern slope of the Tibetan Plateau (SSTP) is one of the rainiest regions in the world where geological hazards caused by extreme precipitation often occur. This study investigates the characteristics and mechanisms of extreme precipitation over SSTP from June to September during 2001–2020 using Global Precipitation Measurement satellite observation. The extreme precipitation days are defined as the days with top 5% of regional-mean daily precipitation over SSTP in this period, which has an average precipitation of 27.2 mm/d. Averaging over the extreme precipitation days, precipitation peaks at an altitude of about 300 m, coinciding with the climatological maximum precipitation, but with a much larger value of 37.2 mm/d than the climatology of 11.9 mm/d. Composite analysis of circulations on extreme days reveals significant circulation anomalies in both the lower and upper troposphere. Specifically, the lower-tropospheric circulations are characterized by significant westerly anomalies over northern India, and the upper-tropospheric circulations are characterized by northerly anomalies over the central Tibetan Plateau, which are statistically independent. The lower-tropospheric westerly anomalies blowing toward SSTP are blocked by the topography, favoring extreme precipitation over SSTP. The upper-tropospheric northerly anomalies, on the other hand, correspond to anomalous northeasterlies north of SSTP in the middle troposphere and southeasterlies to the south in the lower troposphere, and the convergence of these circulation anomalies favors extreme precipitation over SSTP. Lastly, the lower-tropospheric westerly and upper-tropospheric northerly anomalies, respectively, correspond to less precipitation over the South Asian monsoon region and the Tibetan Plateau.

Extreme precipitation, Tibetan Plateau↗
DOE OSTI2024

Large-scale Multiphysics Simulations of Small Modular Reactors Operating in Natural Circulation

Thanks to the advancements in high-performance computing, advanced modeling and simulation have become crucial in driving the development and deployment of next-generation nuclear reactors, such as small modular reactors (SMRs). SMRs offer the promise of cost-effective baseload electricity production and improved safety, while addressing some of the challenges associated with large reactor designs, such as high capital costs and extended construction timelines. As part of the Exascale Computing Project, the large-scale multiphysics simulation of an entire SMR primary system has been achieved by combining computational fluid dynamics and neutronics. In addition to the successful demonstration of full-core SMR simulations, the current study integrated the impact of natural circulation into the system. Natural circulation is the primary mechanism driving coolant circulation in SMRs. The mass flow rate in the core depends on the core power, and a numerical model has been developed to predict it. The pressure drop caused by the helical coil steam generator was also accounted for by developing a pressure drop correlation based on high-fidelity large eddy simulation results, further improving prediction accuracy. In conclusion, the results of the study demonstrate that the implemented natural circulation model is effective in predicting the responses of SMR full-core multiphysics simulations.

ECP↗
DOE OSTI2025

Utah FORGE: RESMAN Well 16A(78)-32 and 16B(78)-32 Stimulation and Circulation Tracer Test Results - 2024

This dataset contains tracer test results from stimulation and circulation experiments conducted on the Utah FORGE wells 16A(78)-32 and 16B(78)-32 during 2024. The data was collected by RESMAN Energy Technology and includes detailed tracer analysis from flowback, short- and extended-duration circulation tests, and reinjection sampling. Sampling included analysis of tracers during different stages of testing in April, August, and September 2024. The dataset is accompanied by an interpretation report and contains time-series tracer concentration data with identification of test phases and sampling conditions. It includes results for flowback from well 16A, commingling effects with water from well 16B, tracer data from short and extended circulation tests, and reinjection tracer corrections for the August/September test. Users should be aware that proprietary tracer methodologies were applied, and they should consult the interpretation report for insights into experimental procedures and data contextualization.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Convectively Induced Secondary Circulations and Wind‐Driven Heat Fluxes in the Surface Energy Balance Over Land

Increased resolution has enabled kilometer-scale weather and climate models to partially resolve secondary circulations, including horizontal convective rolls (HCRs) and cold pool gust fronts. Although these circulations are ubiquitous in convective boundary layers over land, their impacts on the surface energy balance are largely unknown. Doppler lidar and surface observations were combined with DOE E3SM land model experiments, revealing increased surface winds (5 m/s) and heat fluxes (50 W/m 2 ) in convergent branches of HCRs. Larger wind-driven flux responses (up to 150 W/m 2 ) were found along gust fronts. Surface energy balance shifts to accommodate wind-driven fluxes, reducing ground heat conduction and longwave cooling. Our findings from the US Southern Great Plains are broadly relevant to modeling convective boundary layers. In particular, widely used subgrid wind gust parameterizations were found to be physically inconsistent with resolved secondary circulations and could worsen climate prediction biases at kilometer-scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

SULI Report - Development of a Molten Salt Circulation Loop for in-situ Spectroscopy

This project supports the development of real time optical monitoring capabilities for molten salt reactor (MSR) environments by designing, testing, and refining a molten salt circulation loop suitable for combined laser induced breakdown spectroscopy (LIBS) and ultraviolet visible (UV Vis) absorption measurements. Online spectroscopic monitoring is increasingly important for nuclear safeguards, corrosion tracking, and material accountancy, yet MSR process fluids present substantial challenges due to their chemical complexity and hazards such as high temperatures and radiation. To address these needs, this work focuses on Phase I, the development of a room temperature aqueous circulation loop that serves as a surrogate platform for evaluating flow behavior, optical access, and component performance prior to high temperature salt operation. Initial testing identified several practical issues—including leaks, obstructions, and two-phase flow through the absorption cell—that were systematically resolved through hardware replacement, flow path redesign, and venturi pressure optimization. Relocating the flow cell upstream of the primary venturi enabled periods of stable single-phase flow, demonstrating the feasibility of integrating optical diagnostics into a circulation system. The results of Phase I provide essential design insight for Phase II, which will incorporate furnace compatible materials and LiCl KCl eutectic salt. Completion of the molten salt system will deliver a reusable testbed for evaluating multimodal spectroscopic techniques, advancing nondestructive, real time monitoring tools for future MSR and nuclear fuel cycle applications.

98 - NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL↗
DOE OSTI2024

Intracore Natural Circulation Study in the High Temperature Test Facility

The development of the Modular High-Temperature Gas-Cooled Reactor is a significant milestone in advanced nuclear reactor technology. One of the concerns for the reactor’s safe operation is the effects of a loss-of-flow accident (LOFA) where the coolant circulators are tripped, and forced coolant flow through the core is lost. Depending on the steam generator placement, loop or intracore natural circulation develops to help transfer heat from the core to the reactor cavity, cooling system. This paper investigates the fundamental physical phenomena associated with intracore coolant natural circulation flow in a one-sixth Computational Fluid Dynamics (CFD) model of the Oregon State University High Temperature Test Facility (OSU HTTF) following a loss-of-flow accident transient. This study employs conjugate heat transfer and steady-state flow along with an SST k-ω turbulence model to characterize the phenomenon of core channel-to-channel natural convection. Previous studies have revealed the importance of complex flow distribution in the inlet and outlet plenums with the potential to generate hot coolant jets. For this reason, complete upper and lower plenum volumes are included in the analyzed computational domain. CFD results also include parametric studies performed for a mesh sensitivity analysis, generated using the STAR-CCM+ software. The resulting channel axial velocities and flow directions support the test facility scaling analysis and similarity group distortions calculation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Corrosion of 316 L stainless steel under the natural circulation of molten NaCl-MgCl 2 salt

The corrosion behavior of 316 L stainless steel (SS) was studied via the natural circulation of molten eutectic NaCl-MgCl 2 salt through a microloop. The post-corrosion tested 316 L SS microloop sections were characterized with microscopy techniques to determine the microstructural and microchemical changes that occurred at the alloy/salt interface. It was found that 316 L SS showed heterogeneous dissolution at the hot-leg, whereas deposition of corrosion products occurred at the cold-leg. For the first time, experimentally obtained molten salt flow-induced corrosion of 316 L SS results were combined with computational thermodynamic-kinetic models to validate the dissolution and deposition in terms of elemental compositional changes at the alloy/salt interface. The thermodynamic-kinetic modeling predicted that the heterogeneous dissolution of Cr and Fe from the hot-leg section of 316 L SS persisted throughout the salt circulation. The model also estimated that, despite Cr deposition starting earlier than Fe, the total redeposition of Fe is expected to be significantly greater than that of Cr over the circulation of salt. Furthermore, the modeling accurately predicted the subsurface enrichment of Mo which is attributed to the reduced Cr activity and the relatively higher diffusion rate of Mo within the alloy matrix. Here, the agreement between modeling and experimental results confirms that Fe chlorides dissolve at the hot-leg and subsequently deposit at the cold-leg due to activity changes driven by the thermal gradient. By contrast, Cr was not detected in the cold-leg deposits, which is attributed to its weaker temperature dependence on activity, limiting its redeposition under these conditions.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

An Antibody Cocktail-Based Immunoaffinity-LC-MS Method Enabled Ultra-Sensitive and Robust Quantification of Circulating Proinsulin Proteoforms and C-Peptide

Accurately measuring circulating proinsulin proteoforms is crucial for clinical investigation of diabetes, but was previously not feasible owing to limited assay specificity/sensitivity. Here, in this study, we devised a highly sensitive LC-MS-based strategy to quantify intact proinsulin, des-31,32 and des-64,65 proinsulin, and C-peptide in circulation. The method involves: (i) quantitative, robust affinity capture using an optimized antibody cocktail, eliminating the severe quantitative bias across multiple proteoforms typically introduced when using a single antibody; (ii) Lys-C digestion producing unique signature peptides for each proteoform, and (iii) trapping-nano-LC coupled with FAIMS/dCV-MS for an ultrasensitive analysis. The selective trapping/delivery ensured sensitive/selective analysis of the targets while achieving excellent analytical robustness that is critical for clinical assays, and the FAIMS/dCV substantially reduces baseline noise/interferences, further enhancing S/N. The assay achieved exceptional sensitivity, with serum LOQs of 1.7, 2.3, and 3.6 pg/mL respectively for intact-proinsulin, des-31,32 and des-64,65, representing the first assay capable of sensitively quantifying these major circulating proinsulin proteoforms. We applied this assay to 78 subjects, including autoantibody positive (n = 20) and new-onset type 1 diabetes (T1D, n = 19) with respective age/sex/BMI-matched controls, enabling the first accurate profiling of proinsulin proteoforms in clinical groups. The assay results demonstrated a clear separation of control and new-onset T1D groups that a parallel total-proinsulin ELISA assay fails to capture. Furthermore, distinct expression patterns in relative abundance ratios among proteoforms were observed across clinical groups. This assay may provide valuable insights into the β-cell functions and the onset/progression of diabetes and other associated conditions. Moreover, the strategy is broadly applicable to targeted measurement of other biomarker proteoforms.

Shen, Qingqing [University at Buffalo, NY (United ↗
DOE OSTI2025

Radiative, Hydrologic, and Circulation Responses to Warming in Cess‐Potter Simulations Using the Global 3.25‐km SCREAM

Using the global 3.25-km Simple Cloud Resolving E3SM Atmosphere Model (SCREAM 3 km), a pair of 13-month Cess-Potter simulations are performed to quantify the radiative feedbacks and the hydrologic and circulation responses to warming. Large-scale aspects of SCREAM 3 km's top-of-atmosphere radiative fluxes, precipitation rates, and circulations are in good agreement with observations and reanalysis, with notable differences, including a drier lower free-troposphere in the Tropics, reduced precipitation and humidity over the Tropical West Pacific, and poleward shifted Southern Hemisphere midlatitude jet. In response to warming, SCREAM 3 km predicts a total radiative feedback within the top 15% of the CMIP5 and CMIP6 models, which puts it substantially higher than the feedback reported by other kilometer-scale models. SCREAM 3 km's high radiative feedback stems from a strongly positive shortwave cloud feedback, most prominent over the mid- and high-latitudes. SCREAM 3 km's high precipitation response also puts it among the highest of CMIP models, whereas its circulation response is within the spread of CMIP models. An ensemble of five perturbed initial condition Cess-Potter simulations with a 12 km version of SCREAM (SCREAM 12 km) is performed to characterize uncertainty and resolution sensitivity. It suggests that the uncertainty from analyzing a pair of 1-year simulations is small compared to the inter-model spread in feedbacks and precipitation response. SCREAM 12 km also produces a strong precipitation response to warming but a much lower cloud feedback and total radiative feedback. The results from these experiments suggest that the spread in climate feedbacks will likely persist in the next generation of kilometer-scale models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The Role of Deep Convection and Large-scale Circulation in Driving Model Spread in Low Cloud Feedback and Equilibrium Climate Sensitivity

This project aims to advance the understanding of the processes that drive the large uncertainties in climate change projections, use observations to constrain model physics and reduce the inter-model spread in equilibrium climate sensitivity (ECS). There are three major goals: 1) Characterize the representation of the physical pathways that link deep convection, large-scale circulation and low cloud feedback in CMIP6 model simulations and determine the relative contribution of each pathway to the CMIP6 model spread in low cloud feedback and ECS; 2) Use process-oriented diagnostics and multiple observations to evaluate CMIP6 model performance in capturing the observed cloud-circulation relation and deep convection characteristics including convective transition statistics and the bulk properties of mesoscale convective systems (MCSs). Error decomposition in CMIP6 models will be performed. 3) Conduct E3SM short-range hindcasts following the DOE Cloud-Associated Parameterizations Testbed (CAPT) protocol to pinpoint specific model parameters/processes that are crucial to the representation of deep convection, circulation, clouds and the pathways that connect them. We will modify convective parameters in E3SM and analyze the perturbed physics experiments (PPEs) to isolate model parameters that are critical to the uncertainty of ECS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Validation of Pronghorn for Natural-Circulation Molten Salt Loops

This paper presents the development and validation of a high-fidelity thermal-hydraulic model of a molten salt natural circulation flow loop, designed for integration within a digital twin framework. The study evaluates the performance of Idaho National Laboratory’s Pronghorn against experimental data from Texas A&M University Molten Salt Flow Loop (MSFL) four Hitec-salt test benchmark data. Natural circulation of high-Prandtl-number fluids exhibits complex, counter-intuitive flow patterns that make pointwise thermocouple readings unreliable. Experimental work at TAMU’s MSFL provides benchmark data, including flow visualization at a test-section and centerline steady-state temperature measurements along the loop. Validation includes four single-phase natural circulation test cases with Hitec salt. Key metrics include flow profile agreement and steady-state temperature accuracy. Pronghorn results for two-dimensional single-phase agree qualitatively with the experimental flow profile. This paper illustrates the importance of Computational Fluid Dynamics (CFD) in elucidating the behavior of high-Prandtl-number thermal-hydraulics, along with how misleading centerline temperature measurements can be. Pronghorn reproduces the axial and radial stratification that makes single thermocouple readings unreliable. Future research will focus on reduced-order modeling techniques to enable rapid simulation suitable for real-time digital twin applications. The validated cases provide a basis for developing reduced-order surrogates aimed at real-time digital-twin applications.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

The Atlantic Meridional Overturning Circulation’s Response to CO2 Increase: Assessing the Roles of Surface Flux and Oceanic Advection Feedbacks

Abstract The Atlantic meridional overturning circulation (AMOC) is projected to slow down in climate models due to greenhouse gas emissions. However, the physical mechanisms determining the rate of the projected AMOC slowdown remain unclear. Accordingly, this study isolates the roles of oceanic advection and surface flux feedbacks that might accelerate or decelerate the AMOC’s weakening using carbon dioxide (CO 2 ) quadrupling simulations in the CESM1.2 model. Surface flux feedbacks are isolated in partially coupled experiments in which either all surface flux components or the momentum flux responses to AMOC’s weakening that might provide feedback are suppressed, while a tracer decomposition of ocean density anomalies isolates the advection feedbacks. Comparing the ocean density components in the experiments shows that the AMOC’s response is initially determined by CO 2 -induced anomalous surface heat fluxes, and afterward, feedbacks determine its response. In the fully coupled case, surface heat flux feedback strongly promotes AMOC slowdown and causes its near shutdown, while a weaker but active AMOC is maintained when the surface flux feedback is inhibited in the partially coupled case. The positive surface heat flux feedback works by canceling out the negative oceanic heat advection feedback on deep-water formation in the subpolar North Atlantic (SPNA). With the heat advection feedback thus reduced, the positive salinity advection feedback becomes the dominant contributor to SPNA density changes and deep-water formation. In the partially coupled case, negative ocean heat advection feedback and the CO 2 -induced subtropical Atlantic saline anomalies imported into the SPNA play a stabilizing role. The results highlight the importance of SPNA salinity gradients and gyre circulation strength in determining the AMOC’s response rate or recovery.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Design Approach for Circulating Fluidized Bed Riser Reactors such as NETL ASURE: A Review for Clustering Flow

Circulating fluidized bed riser reactors have been a commercial reality for some 80 to 90 years. Through all this time and hundreds if not thousands of research papers on the topic, no clear understanding exists on what is required to design and build a process reactor. There are numerous reasons for this, but the most significant reason is likely that riser reactors are chaotic in nature and unless this chaotic behavior is accounted for, there will be wide discrepancies in the predicted performance and in attempts to scale these reactors without significant trial and error. This work puts forth a new methodology to design riser reactors based upon the desired operating range using the chaotic microstructure behavior. This is accomplished through the use of a nondimensional regime map that was developed using chaotic parameters of memory and order/disorder along with higher moments of skewness and kurtosis. Validation of the approach is provided with circulating fluidized bed combustors and applied to the design of the NETL ASURE facility.

42 ENGINEERING↗
DOE OSTI2024

Utah FORGE: Wells 16A(78)-32 and 16B(78)-32 Extended Circulation Test Data - August and September 2024

The dataset includes data collected during an extended circulation test conducted at the Utah FORGE site between August 8 and September 5, 2024. It provides uncorrected, raw digital data from the test, along with calibration information and a final report detailing the test procedures and corrections. The data is bundled in a single .zip file containing both field calibration and test data. Files include manual calibration data for temperature, pressure, and flow meters, as well as uncorrected, time-stamped measurements recorded in 30-second intervals, such as wellhead pressures, flow rates, and temperatures for wells 16A(78)-32 and 16B(78)-32. Additionally, the final report offers insights into the test methodology and provides guidelines on how to apply field calibrations to correct the raw Pason data.

15 GEOTHERMAL ENERGY↗