Atomic origin of CO2-promoted oxidation dynamics of chromia-forming alloys
Not provided.
Materials Science↗
SEARCH · Engineering Papers
Results for “chromia”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Carburization susceptibility of chromia-forming alloys in high-temperature CO 2
It is generally believed that when a chromia scale forms in high-temperature CO 2 environments, carbon uptake of alloys is nearly eliminated, thereby preventing carburization and associated degradation of properties. We quantitively assess this notion through careful examination of several chromia-forming Ni-based and Fe-based commercial alloys after long-term (10,000-h) exposures to CO 2 and air at 700°C. Here, small but measurable carbon uptake ensued independent of alloy base metal (Ni/Fe), alloy crystal structure (FCC/BCC), and chromia growth rate. The rate for Ni-based alloys was strongly dependent on Si and Mn content, highlighting the need to understand possible long-term effects on mechanical properties.
36 MATERIALS SCIENCE↗
High-Temperature Corrosion of Chromia-Forming Ni-Based Alloys in CO 2 Containing Impurities
Future technologies require structural materials resistant to environmental degradation in high-temperature CO 2 -rich environments. In this work, we exposed several commercially available Ni-based alloys (230, 263, 282, 617, 625, and 740H) to atmospheric pressure gases intended to simulate the compositions expected in future direct-fired supercritical CO 2 power cycles. The alloys were exposed to 95% CO 2 + 4% H 2 O + 1% O 2 and the same gas containing 0.1% SO 2 at temperatures of 600, 650, 700, 750, and 800 °C for 2500 h. With minor exceptions, chromia scales formed on all alloys at all temperatures in the SO 2 -free gas, yielding parabolic growth rates that followed an Arrhenius temperature dependence. Behavior in the SO 2 -containing gas was more complex. Generally, the alloys performed well at temperatures of 650, 750, and 800 °C. While some alloys further performed relatively well across the whole temperature range, several of the alloys experienced chromia failure resulting in non-protective duplex oxide scales and high oxidation rates, at temperatures of 600 and 700 °C. Deviation from protective behavior was associated with internal sulfide formation and, additionally for the case of 600 °C, external sulfate formation. Extensive carburization accompanied growth of the non-protective duplex oxide scales, which made it more difficult for the alloy to recover after initiation of the sulfur-induced accelerated corrosion process. The thermodynamic and kinetic factors influencing the accelerated corrosion in the presence of sulfur are discussed. The results suggest that caution is required when assessing compatibility of Ni-based alloys for CO 2 -based systems when sulfur-based impurities are expected.
36 MATERIALS SCIENCE↗
Molecular-scale investigation of the oxidation behavior of chromia-forming alloys in high-temperature CO2
Abstract Current and future power systems require chromia-forming alloys compatible with high-temperature CO 2 . Important questions concerning the mechanisms of oxidation and carburization remain unanswered. Herein we shed light onto these processes by studying the very initial stages of oxidation of Fe22Cr and Fe22Ni22Cr model alloys. Ambient-pressure X-ray photoelectron spectroscopy enabled in situ analysis of the oxidizing surface under 1 mbar of flowing CO 2 at temperatures up to 530 °C, while postexposure analyses revealed the structure and composition of the oxidized surface at the near-atomic scale. We found that gas purity played a critical role in the kinetics of the reaction, where high purity CO 2 promoted the deposition of carbon and the selective oxidation of Cr. In contrast, no carbon deposition occurred in low purity CO 2 and Fe oxidation ensued, thus highlighting the critical role of impurities in defining the early oxidation pathway of the alloy. The Cr-rich oxide formed on Fe22Cr in high purity CO 2 was both thicker and more permeable to carbon compared to that formed on Fe22Ni22Cr, where carbon transport appeared to occur by atomic diffusion through the oxide. Alternatively, the Fe-rich oxide formed in low purity CO 2 suggested carbon transport by molecular CO 2 .
36 MATERIALS SCIENCE↗
Corrosion of Chromia-Forming and Alumina-Forming Ferritic Stainless Steels under Dual Atmosphere Exposure Conditions
The surface morphology and chemistry of oxide scales formed on select chromia-forming and alumina-forming ferritic steels have been studied after exposure to a dual atmosphere of hydrogen and air. Localized Fe-rich oxide nodules with surface whiskers/platelets form at the onset of corrosion. The initiation and growth of localized nodules and breakdown of passivation are attributed to the presence of hydrogen, inclusion of iron oxide in the passivating scale, and subsequent growth of iron-rich oxide due to the establishment of redox (H 2 -H 2 O) atmosphere and modification of oxide defect chemistry.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Effect of chromia doping of thermal stability of silica fibers
Commercial silica fibers of the type being evaluated for reusable surface insulation for reentry vehicles were found to be porous and composed of subfibers. The effect on shrinkage and devitrification of soaking such silica fibers in water, acetic acid, chromium acetate, and chromium nitrate solutions was studied. Felted specimens made of chromia-doped fibers shrunk only about one-half as much as those made of untreated fibers after exposure in air for 4 hours at 1300 C. The devitrification rate of fibers given prolonged soaks in chromium nitrate was as low as that of as-received fibers.
Zaplatynsky, I.↗
Catalytic recombination of nitrogen and oxygen on iron-cobalt-chromia spinel
The energy-transfer catalytic recombination coefficient for nitrogen and oxygen recombination on iron-cobalt-chromia spinel is inferred from stagnation-point heat flux measurements in dissociated arc-jet flow. This material was coated on several Space Shuttle Orbiter thermal protection tiles. The resulting coefficients are correlated with an Arrhenius model for convenience, and these expressions may be used to account for catalytic recombination in predictions of the heat flux on the spinel-coated tiles flown on several Space Shuttle Orbiter flights. The results are compared with those inferred by Rakich, Stewart, and Lanfranco from an Orbiter flight and arc-jet experiments. Good agreement is obtained for oxygen recombination, but agreement for nitrogen is poor.
Scott, C. D.↗
Radiation Enhanced Anion Diffusion in Chromia
Cr 2 O 3 is a ubiquitous passivating film on alloys that is vital to their stability and performance in hostile environments. In this study, we directly observe and measure how anion transport through the oxide is affected by 400 keV Ar 2+ ion irradiation as a function of temperature (30–500 °C) and dose (0.33–2.00 dpa) in single-crystal Cr 2 O 3 films using embedded 18 O isotopic tracers and atom probe tomography. Diffusion coefficients are experimentally determined and compared to a chemical rate theory model. Experimental and theoretical results are broadly in agreement, showing anion diffusion increases by at least 4–5 orders of magnitude upon irradiation with a weak dependence on temperature and a stronger dose-driven sink-strength dependence. These results reveal that radiation could significantly reduce the protectiveness of Cr 2 O 3 films when passivity relies upon limited anion diffusivity, even at relatively modest levels of irradiation and low temperatures.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Reactivation of chromia poisoned oxygen exchange kinetics in mixed conducting solid oxide fuel cell electrodes by serial infiltration of lithia
The ability to recover the oxygen reduction reaction of poisoned metal oxide surfaces, central to many energy related applications, is demonstrated by controlling relative surface acidity.
30 DIRECT ENERGY CONVERSION↗
Rate of coke formation of centrifugally cast austenitic chromia-forming and alumina-forming alloys in coking conditions
Not Available
Ortiz, Lizeth (ORCID:0000000206716849)↗
Microstructural examination of interactions between chromia-based refractory and nuclear glass in a melter
This study shows the effects of nuclear waste glass production on Monofrax K-3 refractory corrosion. A continuously fed research-scale melter containing an Fe- and Ni-rich simulated nuclear waste feed with borosilicate glass-forming chemicals was cyclically melted at 1150°C and idled at 1050°C for a total of 11 weeks. Chemical maps using scanning electron microscopy show the interactions between the quenched melt and the refractory. Nanoscale X-ray-computed tomography was used for a three-dimensional visualization of certain parts of the interface. Unreacted K-3 consists of primarily corundum (Al,Cr) 2 O 3 and spinel (Fe 2+ ,Mg)(Al,Cr) 2 O 4 interlocking crystalline phases. Some of the Cr from the refractory interacts with the Ni and Fe from the melt to form a reaction layer comprising (Ni,Fe 2+ )(Cr,Fe 3+ ) 2 O 4 spinel crystals. Simultaneously, melt components (Na,Si) infiltrate into the refractory. This interaction proceeds at the expense of the integrity of the refractory structure. Intact refractory grains (e.g., (Al,Cr) 2 O 3 ) as well as the reaction layer itself can lose mechanical integrity and spall off into the melt, especially near the top of the melter. As the reaction layer can be a protective boundary for the refractory against further melt infiltration, a reduction in the reaction layer thickness allows an increase in refractory corrosion.
36 MATERIALS SCIENCE↗
Steam oxidation of chromium corrosion barrier coatings for sic-based accident tolerant fuel cladding
SiC-based materials are currently being considered for accident tolerant fuel (ATF) cladding, however, there are concerns regarding hydrothermal corrosion rates and hermeticity. These issues may be addressed with the utilization of a Cr corrosion barrier coating (CBC) but the interaction of Cr with SiC under loss of coolant accident (LOCA) conditions needs to be investigated. In the present work, Cr coatings were deposited onto chemically vapor deposited (CVD) SiC with either high power impulse magnetron sputtering (HiPIMS), cathodic arc (CA), or a combination of both. Annealing and steam thermogravimetric analysis (TGA) was used to study reaction product formation with and without oxidation. Additionally, after 1200 °C annealing, formation of a Cr x C y carbide layer at the ambient interface and a Cr x Si y C z silicide layer at the SiC interface was observed. After 1200 °C TGA exposure, similar carbide and silicide layers were observed but with a Cr 2 O 3 outer reaction layer and a Si and O rich interfacial layer forming between the carbide and silicide layers. Initial mass gain of the coatings during the 1200 °C TGA exposure was parabolic and were similar to reported rates of chromia formation. Mass gain behavior and observed transitions in chromia microstructure indicate that metallic Cr may be consumed within the first ~1 h at 1200 °C and that subsequent chromia formation occurs at the expense of the underlying Cr carbide layer. Overall, the results show no detrimental impact of Cr coatings on the steam oxidation resistance of SiC up to 4 h at 1200 °C.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Unraveling the role of tungsten as a minor alloying element in the oxidation NiCr alloys
Ni-based superalloys offer a unique combination of mechanical properties, corrosion resistance and high temperature performance. Near ambient pressure X-ray photoelectron spectroscopy was used to study in operando the initial steps of oxidation for Ni-5Cr, Ni-15Cr, Ni-30Cr and Ni-15Cr-6W at 500 °C, p(O 2 )=10 -6 mbar. The comparison of oxide evolution for these alloys quantifies the outsized impact of W in promoting chromia formation. For the binary alloys an increase in chromia due to Cr-surface enrichment is followed by NiO nucleation and growth thus seeding a dual-layer structure. The addition of W (Ni-15Cr-6W) shifts the reaction pathways towards chromia thus enhancing oxide quality. Density functional theory calculations confirm that W atoms adjacent to Cr create highly favorable oxygen adsorption sites. The addition of W supercharges the reactivity of Cr with oxygen essentially funneling oxygen atoms into Cr sites. The experimental results are discussed in the context of surface composition, chemistry, reactant fluxes, and microstructure.
36 MATERIALS SCIENCE↗
Effect of pressure on high-temperature oxidation of Ni alloys in supercritical CO 2 containing impurities
Direct supercritical CO 2 (sCO 2 ) power cycles require structural materials compatible with hot sCO 2 containing high levels of water and oxygen impurities. Chromia-forming Ni-based superalloys, which are leading candidates at temperatures > 600 °C, have shown good compatibility in pure sCO 2 , however potential impurity effects are not well understood. In this report we exposed several commercial Ni-based alloys to 95%CO 2 -4%H 2 O-(1-3)%O 2 at 750 °C and 0.1 or 20 MPa for 2500 h. Protective chromia scales formed in all cases. Nevertheless, water vapor-assisted oxide volatilization clearly occurred at high pressure. The volatilization rates decreased with time, but still represent a potentially serious compatibility issue in real, high-velocity, sCO 2 systems.
36 MATERIALS SCIENCE↗
Volatile products from the interaction of KCl(g) with Cr2O3 and LaCrO3 in oxidizing environments
Cooled target collection techniques and high pressure mass spectrometric sampling were used to measure the relative rates of oxidative vaporization and to identify the volatile products emanating from samples of chromia and Mg-doped lanthanum chromite. The materials were exposed to partial pressures of KCl with and without H2O in one atmosphere of slowly flowing oxygen at elevated temperatures. Chromia and fresh samples of lanthanum chromite exhibited enhanced rates of oxidative vaporization upon exposure to these reactants. Mass spectrometric identification showed that the enhancements resulted from the heterogeneous formation of complex molecules of the type KCl sub 1,2,3 CrO3 and KOH sub l,2 CrO3. Lanthanum chromite that had undergone prolonged oxidative vaporization exhibited no enhanced oxidation upon exposure to the reactants.
Kohl, F. J.↗
Study of the effects of gaseous environments on sulfidation attack of superalloys
Studies were conducted to examine the effect of the gaseous corrodents NaCl, HCl, and NaOH on the high temperature oxidation and Na2SO4-induced corrosion behavior of the alumina former NiAl, the chromia former Ni-25 wt.% Cr, elemental Cr, and the superalloy B-1900. Experiments were conducted at 900 and 1050 C in air in the presence and absence of the gaseous corrodents. Effects involving both reaction rates and microstructural changes in oxide morphology were observed due to the presence of these corrodents at levels anticipated to be present in operating industrial and marine gas turbines. The effect of gaseous NaCl, HCl, and possibly NaOH on NiAl in simple oxidation was to remove aluminum from below the protective alumina layer and to simultaneously weaken the adherence of the protective alumina oxide scale to the substrate. The aluminum removed from below the oxide scale was redeposited on its surface as alpha-Al2O3 whiskers. With respect to the chromia formers, gaseous NaCl and HCl promoted breakaway oxidation kinetics and changes in the microstructures of the oxide scales.
Smeggil, J. G.↗
Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions
Many structural materials rely on the formation of chromia, silica or alumina as a protective layer when exposed in high temperature oxidizing environments. The presence of these oxide layers provides a protective diffusion barrier which slows down further oxidation. In atmospheres containing water vapor, however, reactions to form volatile hydroxide species occur which remove the surface oxide, thus, lowering the protective capability of the oxide scale. This paper summarizes the current understanding of volatility of chromia, silica and alumina in water vapor containing combustion environments. In addition unanswered questions in each system are discussed. Th current paper represents an update on the considerable information learned in the past five years for these systems.
Opila, Elizabeth J.↗
Cyclic Oxidation of High-Temperature Alloy Wires in Air
High-temperature alloy wires are proposed for use in seal applications for future re-useable space vehicles. These alloys offer the potential for improved wear resistance of the seals. The wires must withstand the high temperature environments the seals are subjected to as well as maintain their oxidation resistance during the heating and cooling cycles of vehicle re-entry. To model this, the wires were subjected to cyclic oxidation in stagnant air. of this layer formation is dependent on temperature. Slow growing oxides such as chromia and alumina are desirable. Once the oxide is formed it can prevent the metal from further reacting with its environment. Cyclic oxidation models the changes in temperature these wires will undergo in application. Cycling the temperature introduces thermal stresses which can cause the oxide layer to break off. Re-growth of the oxide layer consumes more metal and therefore reduces the properties and durability of the material. were used for cyclic oxidation testing. The baseline material, Haynes 188, has a Co base and is a chromia former while the other two alloys, Kanthal A1 and PM2000, both have a Fe base and are alumina formers. Haynes 188 and Kanthal A1 wires are 250 pm in diameter and PM2000 wires are 150 pm in diameter. The coiled wire has a total surface area of 3 to 5 sq cm. The wires were oxidized for 11 cycles at 1204 C, each cycle containing a 1 hour heating time and a minimum 20 minute cooling time. Weights were taken between cycles. After 11 cycles, one wire of each composition was removed for analysis. The other wire continued testing for 70 cycles. Post-test analysis includes X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) for phase identification and morphology.
Reigel, Marissa M.↗