Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cation additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Cation Additive Enabled Rechargeable LiOH-Based Lithium–Oxygen Batteries

Lithium-oxygen (Li-O 2 ) batteries have attracted extensive research interest due to their high energy density. Other than Li 2 O 2 (a typical discharge product in Li-O 2 batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH-based Li-O 2 battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution-based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li+ leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li-O 2 batteries by designing a simple system to promote LiOH formation/decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cation Additive Enabled Rechargeable LiOH‐Based Lithium–Oxygen Batteries

Abstract Lithium–oxygen (Li–O 2 ) batteries have attracted extensive research interest due to their high energy density. Other than Li 2 O 2 (a typical discharge product in Li–O 2 batteries), LiOH has proved to be electrochemically active as an alternative product. Here we report a simple strategy to achieve a reversible LiOH‐based Li–O 2 battery by using a cation additive, sodium ions, to the lithium electrolyte. Without redox mediators in the cell, LiOH is detected as the sole discharge product and it charges at a low charge potential of 3.4 V. A solution‐based reaction route is proposed, showing that the competing solvation environment of the catalyst and Li + leads to LiOH precipitation at the cathode. It is critical to tune the cell chemistry of Li–O 2 batteries by designing a simple system to promote LiOH formation/decomposition.

Bi, Xuanxuan↗
DOE OSTI2022

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Achieving the long-term stability of perovskite solar cells is arguably the most important challenge required to enable widespread commercialization. Understanding the perovskite crystallization process and its direct impact on device stability is critical to achieving this goal. The commonly employed dimethyl-formamide/dimethyl-sulfoxide solvent preparation method results in a poor crystal quality and microstructure of the polycrystalline perovskite films. In this work, we introduce a high-temperature dimethyl-sulfoxide-free processing method that utilizes dimethylammonium chloride as an additive to control the perovskite intermediate precursor phases. By controlling the crystallization sequence, we tune the grain size, texturing, orientation (corner-up versus face-up) and crystallinity of the formamidinium (FA)/caesium (FA) y Cs 1-y Pb(I x Br 1-x )3 perovskite system. A population of encapsulated devices showed improved operational stability, with a median T80 lifetime (the time over which the device power conversion efficiency decreases to 80% of its initial value) for the steady-state power conversion efficiency of 1,190 hours, and a champion device showed a T80 of 1,410 hours, under simulated sunlight at 65 degrees C in air, under open-circuit conditions. In conclusion, this work highlights the importance of material quality in achieving the long-term operational stability of perovskite optoelectronic devices.

14 SOLAR ENERGY↗
DOE OSTI2022

Expanding the Cage of 2D Bromide Perovskites by Large A-Site Cations

Two-dimensional (2D) halide perovskites have outstanding optoelectronic properties, and they feature a variety of organic cation spacers and cage A-site cations that can be incorporated into their structures. It has recently been reported that the Goldschmidt tolerance factor can be relaxed and expanded in iodide 2D perovskites. Bromide 2D perovskites, whose multilayer structures and optical properties are much less studied, provide a great platform for studying structure-property relationships for 2D perovskites with large Asite cations. Herein, we report the synthesis and structure of three new 2D bromide perovskites-(BA)(2)(MHy)(2)Pb3Br10 (BA, butylammonium; MHy, methylhydrazinium), (BA)(2)(EA)(2)Pb3Br10 (EA is ethylammonium), and (BA)(2)(DMA)Pb2Br7 (DMA is dimethylammonium). We compared them with other 2D perovskites with different A-site cations but with the same spacer and layer thickness. Single-crystal structures show that the Pb-Br bonds are elongated to accommodate the large A-site cations. Additionally, the octahedra in (BA)(2)(MHy)(2)Pb3Br10 and (BA)(2)(EA)(2)Pb3Br10 are highly distorted, and their different stacking patterns of the inner and outer layers lead to the formation of the n = 3 phases. Density functional theory calculations show that 2D perovskites with larger A-site cations (e.g., DMA, MHy, and EA) have smaller band dispersions and larger effective masses than those with Cs+ and MA. (BA)(2)(MHy)(2)Pb3Br10 also exhibits one of the largest Rashba splittings in the literature. Structures with large cage cations also exhibit high band gaps within the same n number and short photoluminescence (PL) lifetimes. Temperature- and power-dependent PL measurements reveal that the broad shoulder in the PL peak originates from the trap states.

Emission↗
DOE OSTI2021

High resolution measurements reveal abiotic and biotic mechanisms of elevated nitric oxide emission after wetting dry soil

Wetting dry soil triggers emission of nitric oxide (NO), which can harm air quality and influence ecosystem N balance. NO released after wetting may be derived from two primary mechanisms: (1) abiotic decomposition of nitrite (NO 2 -) present in the dry soil and (2) biologically-mediated production of NO. The relative contributions of these mechanisms to NO emission are challenging to partition. To differentiate the two mechanisms, we made continuous observations of NO emission from a range of soils that varied in texture, pH, and exchangeable cations. Additionally, we coupled NO gas exchange measurements with automated, non-destructive high-resolution sampling of inorganic N species via microdialysis. We identified two distinct phases of NO production (1) an initial phase that reached its maximum less than 30 min after rewetting; and (2) a second phase lasting up to 36 h. The magnitude of the initial phase of NO production was correlated with the initial nitrous acid concentration (calculated from NO 2 - concentrations and soil pH) and soil exchangeable calcium. The second phase of NO emission coincided with a peak in NO 2 - that preceded NO 3 - accumulation. Together, these results suggest that NO emissions following wetting are defined by an initial pulse of abiotic NO formation mediated by soil acidity at mineral surfaces, followed by a prolonged pulse of NO emission driven by a lag between the biological processes of ammonia oxidation and nitrite oxidation. These results can inform mechanistic models of NO emissions from soils to improve predictions of the terrestrial N cycle and atmospheric chemistry.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Beyond Thermodynamics: Assessing the Dynamical Softness of Hydrated Ions from First Principles

Ion (de)hydration is a key rate-determining step in interfacial processes from corrosion to electrochemical energy storage. However, predicting the kinetics of ion (de)hydration remains challenging, prompting the use of static proxies such as hydration energy and valence. While useful for assessing thermodynamic preferences, such descriptors cannot fully capture the dynamical softness of the hydration shell that dictates kinetics. Accordingly, we use first-principles molecular dynamics to analyze hydration shell softness for a diverse set of metal cations. Additionally, three dynamic metrics are introduced to intuitively describe the bond rigidity, shape deformability, and exchange fluidity of the solvation shell. Together, these metrics capture the relevant physics in the static descriptors, while offering a far more complete and efficient representation for the overall propensity for (de)hydration. Application to the hydrated ion set demonstrates a weak connection between dynamical softness and hydration energy, confirming that dynamical descriptors of hydration are key for correctly describing ion transfer processes.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N 2 Reduction

We recently reported a reaction sequence that activates C–H bonds in simple arenes as well as the N–N triple bond in N 2 , delivering the aryl group to N 2 to form a new N–C bond ( Nature 2020 , 584, 221). This enables the transformation of abundant feedstocks (arenes and N 2 ) into N-containing organic compounds. The key N–C bond forming step occurs upon partial silylation of N 2 . However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, in this work, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N 2 must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)–NN(SiMe 3 ) 2 intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi 2 ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N–C bond formation offers a method for functionalizing N 2 using organometallic chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The surface chemistry of the atomic layer deposition of metal thin films

Abstract In this perspective we discuss the progress made in the mechanistic studies of the surface chemistry associated with the atomic layer deposition (ALD) of metal films and the usefulness of that knowledge for the optimization of existing film growth processes and for the design of new ones. Our focus is on the deposition of late transition metals. We start by introducing some of the main surface-sensitive techniques and approaches used in this research. We comment on the general nature of the metallorganic complexes used as precursors for these depositions, and the uniqueness that solid surfaces and the absence of liquid solvents bring to the ALD chemistry and differentiate it from what is known from metalorganic chemistry in solution. We then delve into the adsorption and thermal chemistry of those precursors, highlighting the complex and stepwise nature of the decomposition of the organic ligands that usually ensued upon their thermal activation. We discuss the criteria relevant for the selection of co-reactants to be used on the second half of the ALD cycle, with emphasis on the redox chemistry often associated with the growth of metallic films starting from complexes with metal cations. Additional considerations include the nature of the substrate and the final structural and chemical properties of the growing films, which we indicate rarely retain the homogeneous 2D structure often aimed for. We end with some general conclusions and personal thoughts about the future of this field.

Materials Science↗
DOE OSTI2021

From Intermolecular Interaction Energies and Observable Shifts to Component Contributions and Back Again: A Tale of Variational Energy Decomposition Analysis

Quantum chemistry in the form of density functional theory (DFT) calculations is a powerful numerical experiment for predicting intermolecular interaction energies. However, no chemical insight is gained in this way beyond predictions of observables. Energy decomposition analysis (EDA) can quantitatively bridge this gap by providing values for the chemical drivers of the interactions, such as permanent electrostatics, Pauli repulsion, dispersion, and charge transfer. These energetic contributions are identified by performing DFT calculations with constraints that disable components of the interaction. This review describes the second-generation version of the absolutely localized molecular orbital EDA (ALMO-EDA-II). The effects of different physical contributions on changes in observables such as structure and vibrational frequencies upon complex formation are characterized via the adiabatic EDA. Example applications include red- versus blue-shifting hydrogen bonds; the bonding and frequency shifts of CO, N 2 , and BF bound to a [Ru(II)(NH 3 ) 5 ] 2 + moiety; and the nature of the strongly bound complexes between pyridine and the benzene and naphthalene radical cations. Additionally, the use of ALMO-EDA-II to benchmark and guide the development of advanced force fields for molecular simulation is illustrated with the recent, very promising, MB-UCB potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fast-Charging Li 4 Ti 5 O 12 Anode Driven by Light

Lithium-ion batteries with fast charging capabilities are crucial for widespread adoption of electric vehicles, as they will increase acceptance of the technology and reduce range anxiety for drivers. To achieve this, advanced fast charging technologies and alternative methods to enhance the slow electrochemical processes are desperately required. This study applied light-emitting diode (LED) photo-assisted fast charging to Li 4 Ti 5 O 12 (LTO), a large bandgap cubic spinel material, to enhance charging speed through electronic-structure coupling. UV LED-generated light irradiation on to the electrode interface boosted the ion diffusion and lithium cation addition by a factor of 1.3 during electrochemical lithiation, resulting in a 30% decrease in charging time under ambient conditions. Red LED light was not effective in accelerating the reaction as it does not provide sufficient energy. The first-principles calculations support the concept that UV illumination generates charges by overcoming the material’s bandgap and effectively reducing it through the introduction of additional titanium defect states.

25 ENERGY STORAGE↗
DOE OSTI2022

Geopolymer Cements: Resistance-Engineered Sewer Infrastructure for Longevity using Innovative, Energy-efficient, Synthesis Techniques (RESILIENT)

The primary objective of this project was to engineer an ultra-acid-resistant low-calcium alkali-activated cement paste for wastewater infrastructure applications to address the critical need for concrete materials with enhanced sulfuric acid resistance compared to ordinary Portland cement (OPC) concrete. In this project, the first milestone was to benchmark the sulfuric acid (SA) resistance of OPC and metakaolin-based geopolymer cement pastes. The second milestone was to model, select, and evaluate the efficacy of metal cation additions on the SA resistance of geopolymer cements. The third milestone was to create synthetic metakaolin that performed similarly to natural metakaolin. The fourth milestone was to design, build, and test the efficacy of four abiotic and biotic nano seeding agents. The fifth and final milestone was to quantify the breakeven material cost requirements and estimated environmental lifecycle costs of the most durable geopolymer cement formulations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2006

Low conductivity and sintering-resistant thermal barrier coatings

A thermal barrier coating composition is provided. The composition has a base oxide, a primary stabilizer, and at least two additional cationic oxide dopants. Preferably, a pair of group A and group B defect cluster-promoting oxides is used in conjunction with the base and primary stabilizer oxides. The new thermal barrier coating is found to have significantly lower thermal conductivity and better sintering resistance. In preferred embodiments, the base oxide is selected from zirconia and hafnia. The group A and group B cluster-promoting oxide dopants preferably are selected such that the group A dopant has a smaller cationic radius than the primary stabilizer oxide, and so that the primary stabilizer oxide has a small cationic radius than that of the group B dopant.

Zhu, Dongming↗
NASA NTRS2007

Low conductivity and sintering-resistant thermal barrier coatings

A thermal barrier coating composition is provided. The composition has a base oxide, a primary stabilizer, and at least two additional cationic oxide dopants. Preferably, a pair of group A and group B defect cluster-promoting oxides is used in conjunction with the base and primary stabilizer oxides. The new thermal barrier coating is found to have significantly lower thermal conductivity and better sintering resistance. In preferred embodiments, the base oxide is selected from zirconia and hafnia. The group A and group B cluster-promoting oxide dopants preferably are selected such that the group A dopant has a smaller cationic radius than the primary stabilizer oxide, and so that the primary stabilizer oxide has a small cationic radius than that of the group B dopant.

Zhu, Dongming↗
NASA NTRS1980

The role of P2O5 in silicate melts

Phase equilibria data in the systems SiO2-P2O5, P2O5-M(x)O(y), and P2O5-M(x)O(y)-SiO2 are employed in conjunction with chromatographic and spectral data to investigate the role of P2O5 in silicate melts. P2O5 depolymerizes pure SiO2 melts by entering the network as a four-fold coordinated cation, but polymerizes melts in which an additional metal cation other than silicon is present. In this complex system P2O5 acts to increase phase separation by further enrichment of the high charge density cations Ti, Fe, Mg, Mn, Ca, in the ferrobasaltic liquid. The dual behavior of P2O5 is explained in a model which requires complexing of phosphate anions and metal cations in the melt. This interaction destroys Si-O-M-O-Si bonds polymerizing the melt. The higher concentration of Si-O-M-O-Si bond complexes in immiscible ferrobasaltic liquids relative to their conjugate immiscible granite liquids explains the partitioning of P2O5 into the ferrobasaltic liquid.

Ryerson, F. J.↗
DOE OSTI2021

Molecular Level Differences in Ionic Solvation and Transport Behavior in Ethylene Oxide-Based Homopolymer and Block Copolymer Electrolytes

Block copolymer electrolytes (BCE) such as polystyrene-block-poly(ethylene oxide) (SEO) blended with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and composed of mechanically robust insulating and rubbery conducting nanodomains are promising solid-state electrolytes for Li batteries. Here, we compare ionic solvation, association, distribution, and conductivity in SEO-LiTFSI BCEs and their homopolymer PEO-LiTFSI analogs toward a fundamental understanding of the maximum in conductivity and transport mechanisms as a function of salt concentration. Ionic conductivity measurements reveal that SEO-LiTFSI and PEO-LiTFSI exhibit similar behaviors up to a Li/EO ratio of 1/12, where roughly half of the available solvation sites in the system are filled, and conductivity is maximized. As the Li/EO ratios increase to 1/5 the conductivity, of the PEO-LiTFSI drops nearly 3-fold, while the conductivity of SEO-LiTFSI remains constant. FTIR spectroscopy reveals that additional Li cations in the homopolymer electrolyte are complexed by additional EO units when the Li/EO ratio exceeds 1/12, while in the BCE, the proportion of complexed and uncomplexed EO units remains constant; Raman spectroscopy data at the same concentrations show that Li cations in the SEO-LiTFSI samples tend to coordinate more to their counteranions. Atomistic-scale molecular dynamics simulations corroborate these results and further show that associated ions tend to segregate to the SEO-LiTFSI domain interfaces. The opportunity for "excess" salt to be sequestered at BCE interfaces results in the retention of an optimum ratio of uncompleted and complexed PEO solvation sites in the middle of the conductive nanodomains of the BCE and maximized conductivity over a broad range of salt concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Calcium Cosalt Addition to Alter the Cation Solvation Structure and Enhance the Ca Metal Anode Performance

Accessing the energy density and sustainability of calcium metal batteries requires mastering reversible calcium electrodeposition through electrolyte design. Several electrolytes support reversible, ambient temperature deposition but at utilization and rate too low for practical applications. These challenges stem from solvation structures characterized by either high barriers for cation desolvation or thermodynamic instability, leading to parasitic decomposition of the salt and solvent. The optimal solvation structure for the effective delivery of calcium to the electrode interface is not known. In this work, we show that adding a relatively small amount of a weakly associating calcium salt (calcium carba-closo-dodecaborate) to an otherwise strongly associated solution (calcium borohydride in tetrahydrofuran) produces a surprising population of fully solvent-coordinated Ca2+ cations in the form of solvent-separated ion pairs (SSIPs). We further demonstrate that the formation of these SSIPs beneficially impacts the kinetics and thermodynamics of calcium electrodeposition, revealing the unexpected finding that direct coordination of Ca2+ by the BH4– anion limits the electrodeposition process. These findings reveal how the competition between solvent and anion coordination to Ca2+ affects calcium deposition kinetics and cycling stability, setting the stage for a new calcium electrolyte design based on mixed anion electrolytes.

Landers, Alan T.↗