Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cadmium selenide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Solid-gas phase equilibria and thermodynamic properties of cadmium selenide.

Accurate vapor pressures are determined through direct weight loss measurements using the Knudsen effusion technique. The experimental data are evaluated by establishing the mode of vaporization and determining the heat capacity of cadmium selenide at elevated temperatures. Additional information is obtained through a second- and third-law evaluation of data, namely, the heat of formation and the absolute entropy of cadmium selenide. A preferential loss of selenium during the initial heating of CdSe is observed, which leads to a deviation in stoichiometry.

Sigai, A. G.↗
NASA NTRS1977

Conversion of visible light to electrical energy - Stable cadmium selenide photoelectrodes in aqueous electrolytes

Stabilization of n-type CdSe to photoanodic dissolution is reported. The stabilization is accomplished by the competitive oxidation of S(--) or S(n)(--) at the CdSe photoanode in an electrochemical cell. Such stabilized cells are shown to sustain the conversion of low energy (not less than 1.7 eV) visible light to electricity with good efficiency and no deterioration of the CdSe photoelectrode or of the electrolyte. The electrolyte undergoes no net chemical change because the oxidation occurring at the photoelectrode is reversed at the cathode. Conversion of monochromatic light at 633 nm to electricity is shown to be up to approximately 9% efficient with output potentials of approximately 0.4 V. Conversion of solar energy to electricity is estimated to be approximately 2% efficient.

Wrighton, M. S.↗
NASA NTRS1965

A cdse-znse thin film rectifier.

Properties of thin film rectifier formed on glass substrate by vacuum-depositing cadmium selenide- zinc selenide film between two deposited gold electrodes

CADMIUM SELENIDE↗
DOE OSTI2024

Evaporated CdSe for Efficient Polycrystalline CdSeTe Thin-Film Solar Cells

Recent progress has shown that alloying cadmium telluride (CdTe) with cadmium selenide (CdSe) to create a CdSexTe1-x (CdSeTe) gradient region can significantly boost the performance of polycrystalline CdSeTe thin-film solar cells. However, improper CdSeTe alloying might introduce problematic band alignment and deleterious voids at the front interface, limiting the benefit maximization of this technique. Here, we show that the CdSe layers deposited by thermal evaporation result in CdSeTe cells with a higher performance than the sputtered CdSe. This is because evaporated CdSe can avoid the formation of voids at the front interface, producing improved front junction quality with suppressed front junction nonradiative recombination. The champion cell using evaporated CdSe demonstrated a power conversion efficiency (PCE) of 19.7%, much higher than 18.1% in the cell using sputtered CdSe.

cadmium selenide↗
DOE OSTI2024

Near-Infrared Optical Gain of Colloidal Quantum Wells via Intraband Transitions

Tunable, unipolar, near-infrared intraband optical gain is demonstrated in semiconductor colloidal quantum wells, expanding the form and optical range for potential infrared applications. Atomically flat colloidal quantum wells of cadmium selenide display photoinduced absorption features in the near-infrared assigned to intraband (alternatively intersubband) transitions from the first to second electron subbands of the quantum wells. Under ultraviolet optical excitation, these same transitions from the first to second electron subbands are shown to exhibit stimulated emission, resulting in optical gain covering the near-infrared spectral region. The modal gain, bandwidth, and lifetime of this intraband gain are manipulated by using excitation energy, fluence, temperature, and surface chemistry. Unlike previous demonstrations of intraband optical gain in epitaxial quantum wells (e.g., quantum cascade lasers), the colloidal quantum wells are undoped. As a result, nearly thresholdless gain is in principle possible and limited in practice by the measurement of small optical losses of the samples in the near-infrared. Furthermore, the observations may be understood as a modified "quantum fountain" employing the valence band, a strategy that may be applied to many other materials.

Optical gain↗
DOE OSTI2026

In-Situ Ligand-Induced Chirality Transfer in Emissive CdSe Nanoplatelets

Terminating semiconductor nanocrystals with chiral organic ligands can induce chiroptical properties that combine the chiral character of the ligands with the strong and tunable optical properties of the nanocrystal. However, the synthesis of such chiral-modified nanocrystals is currently limited by solvent incompatibility between polar chiral ligands and nonpolar traditional ligands, as well as by ligand dissolution behavior that ultimately compromises nanocrystal quality and the degree to which chiroptical properties can be manipulated. In this work, we demonstrate a single-step synthesis of chiral cadmium selenide (CdSe) nanoplatelets (NPLs) that eliminates the need for postsynthetic ligand exchange in aqueous solvents, resulting in highly emissive chiral CdSe NPLs. By directly incorporating chiral aminodecanoic acid ligands during synthesis, we achieve in situ ligand binding and chirality transfer to CdSe NPLs. This approach produces CdSe NPLs with high photoluminescence quantum efficiencies of 50% and circular dichroism dissymmetry factors (gCD) on the order of 10 –4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Increased Voltage in CdSe Solar Cells by Mitigation of Charge Carrier Trapping Due to Se Vacancies

Cadmium selenide (CdSe), with a 1.7 eV bandgap, is a promising high-bandgap semiconductor for tandem solar cells, yet device efficiencies are hindered by rapid minority carrier recombination. Here, in this study, polycrystalline CdSe solar cells are investigated using radiative emission spectroscopy, time-resolved photoluminescence, and density functional theory, revealing fast (sub-nanosecond) minority carrier trapping by selenium vacancy-related defect states with densities of (5–50) × 10 17 cm −3 , limiting carrier mobility and increasing recombination. By reducing absorber thickness to ≈0.5 µm, trapping effects are mitigated, achieving a record open-circuit voltage of 917 mV, a 165 mV improvement over prior reports. These findings clarify the role of Se vacancies in limiting CdSe solar cell performance and provide insights applicable to CdSe and CdSeTe thin-film photovoltaics. This work advances understanding of defect-mediated losses in II–VI semiconductors and suggests pathways for improving solar cell performance through defect control.

14 SOLAR ENERGY↗
DOE OSTI2026

Forming Gas Annealing Improves the Performance of Ex Situ Sb-Doped CdSeTe Thin-Film Solar Cells

Group V doping in cadmium-selenide-telluride (CdSeTe) polycrystalline thin-film solar cells has demonstrated improved power conversion efficiencies (PCEs) and long-term stabilities as compared to the traditional Cu doping in the last decade. The dopants can be successfully incorporated by either in situ or ex situ doping. Here, we report that forming gas (FG) annealing enhances the efficiencies of CdSeTe polycrystalline thin-film solar cells utilizing ex situ antimony (Sb) doping via close-space sublimation of SbCl3 at ambient pressure. The FG annealing increases the hole density and carrier lifetime, reduces the back barrier height, and, therefore, leads to improved open-circuit voltages (VOCs) and fill factors (FFs). The champion device achieves a PCE of 19.2% with a VOC of 877 mV, a current density (JSC) of 30.2 mA/cm2, and an FF of 72.4%. Importantly, the Sb-doped devices showed improved stability under stress tests as compared to Cu-doped devices.

14 SOLAR ENERGY↗
DOE OSTI2025

Modulating Hole Transfer from CdSe Quantum Dots by Manipulating the Surface Ligand Density

The structure and density of surface capping ligands in cadmium chalcogenide quantum dots (QDs) are important considerations for controlling the efficiency of charge separation via the transfer of electrons or holes to molecular acceptors. Here we show how the manipulation of the surface ligand density of oleic acid-capped cadmium selenide (CdSe) QDs impacts the efficiency of hole transfer (HT) to polyoxovanadate alkoxides. Meerwein’s salt is used as a ligand-stripping agent, providing opportunities to quantitatively manipulate the ligand density at the surface of the nanocrystal, as evidenced by 1 H NMR spectroscopy. Time-resolved photoluminescence and transient absorption spectroscopies reveal that the extent of HT is quantitatively related to increased surface accessibility. Collectively, these results show that the reduction of surface ligand density can be used to tune the extent of interactions of molecular acceptors with QDs, providing a route to control charge-transfer processes relevant to improving the efficiency of QDs as photosensitizers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

2D Semiconductor Nanosheets Supported on Colloidal Quantum Cubes

Two-dimensional (2D) colloidal nanocrystals bridge the physics of epitaxial quantum wells with the synthetic scalability of solution-processed nanomaterials, making them an attractive platform for future LEDs, lasers, and photodetectors. However, their strongly anisotropic 2D morphology complicates the formation of close-packed films required for electrically interfaced devices. Here, we address this limitation by introducing semiconductor quantum cubes (QCs) in which 2D CdSe nanosheets are conformally grown on six faces of CdS cubic scaffolds. This architecture preserves excitonic physics of quasi-2D nanosheets while leveraging the mechanical rigidity and self-assembly of nanocubes, enabling close-packed films with improved electronic coupling and electrical conductivity. By extending CdS/CdSe QCs into a CdS/CdSe/CdS core/shell/shell structure, we realize 2D quantum wells that exhibit unusual multiexciton behavior. In particular, CdS/CdSe/CdS QCs show repulsive exciton–exciton interactions, which decouple CdSe facets into quasi-independent emitters. This leads to the suppressed Auger recombination, long multiexciton lifetimes, and broadband optical gain. The demonstrated combination of unusual multiexciton photophysics and favorable film self-assembly characteristics in QCs presents opportunities for solution-processed optoelectronic devices.

perovskites↗
DOE OSTI2025

Stimulated Emission from Below the Bandgap in Giant Quantum Shells

Colloidal semiconductor nanocrystals (NCs) have emerged as promising candidates for developing solution-processable optical gain media, with potential applications in integrated photonic circuits and lasers. However, the deployment of NCs in these technologies has been hindered by nonradiative Auger recombination of multiexciton states, which shortens the optical gain lifetime and reduces its spectral range. Here, we demonstrate that these limitations can be overcome by using giant colloidal quantum shells (g-QSs), comprising a quantum-confined CdSe shell grown over a large (~14 nm) CdS bulk core. Such bulk-nanoscale architecture minimizes exciton–exciton interactions, leading to suppressed Auger recombination and one of the broadest gain bandwidths reported for colloidal nanomaterials, spanning energies both above and, remarkably, below the bandgap. Ultrafast transient absorption and photoluminescence measurements demonstrate that the high-energy portion of optical gain arises from states containing more than 15 excitons per particle while the unusual sub-bandgap gain behaviour results from an Auger-assisted radiative recombination, a mechanism that has traditionally been viewed as a loss pathway. Altogether, these results reveal a unique gain regime associated with bulk-nanocrystal hybrid systems, which offers a promising path toward solution-processable light sources.

Absorption↗
DOE OSTI2025

Modulating thermal conductance at ligand/nanocrystal interfaces via oxygen-coordinated ligands

Here, the interfacial thermal conductance (h lig–NC ) between a cadmium selenide (CdSe) nanocrystal (NC) and three related organic ligands—olealdehyde, oleyl alcohol, and oleic acid—was investigated computationally. These ligands have the same carbon backbone but differ in the number and type of oxygen-coordinated headgroups (carbonyl and/or hydroxyl), leading to distinct bonding geometries involving monodentate and bidentate bonds. For a fully encapsulated NC, h lig–NC increases in the order of olealdehyde, oleic acid, and oleyl alcohol ligands. To isolate the contributions of h lig–NC from each headgroup type, the distinct bonding geometries were analyzed. Aldehyde and alcohol ligands, each featuring a single oxygen headgroup (carbonyl or hydroxyl), exhibit similar O–Cd separations and nearly identical h lig–NC per ligand at full surface coverage. However, the hydroxyl group in the alcohol ligand enables a higher ligand grafting density on the NC surface, resulting in a greater overall h lig–NC than the aldehyde-grafted NCs. In contrast, the oleic acid ligand forms multidentate bonds with the NC, leading to a shorter average O–Cd separation and a higher h lig–NC per ligand compared to monodentate bonds. Nevertheless, steric hindrance from the acid ligand's larger headgroup reduces its grafting density relative to alcohol ligands, ultimately resulting in a lower overall h lig–NC .

Wong, Kae-Lin [Zhejiang Univ., Hangzhou (China)] (↗