Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “bulk properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Source function approach to turbulence bulk properties

A turbulence model to compute bulk properties is presented in which a prescribed source function is used to provide the rate of energy input into the turbulent flow, and the EDQNM model is used to treat the nonlinear transfer in the Navier-Stokes equations. The predictions of the model are tested against (1) the measured Nusselt number versus Rayleigh number relation in turbulent laboratory convection, and (2) the measured bulk kinetic energies and dissipation rates in turbulent channel flow for Reynolds numbers Re = 12,300 and 30,800. In addition, a sensitivity study is performed with respect to the choice of Kolmogorov constant. Generally, the predictions of the model are in reasonable accord with the available experimental data.

Canuto, V. M.↗
NASA NTRS1972

Determination of bulk properties of tropical cloud clusters from large scale heat and moisture budgets, appendix B

The bulk properties of tropical cloud clusters, as the vertical mass flux, the excess temperature, and moisture and the liquid water content of the clouds, are determined from a combination of the observed large-scale heat and moisture budgets over an area covering the cloud cluster, and a model of a cumulus ensemble which exchanges mass, heat, vapor and liquid water with the environment through entrainment and detrainment. The method also provides an understanding of how the environmental air is heated and moistened by the cumulus convection. An estimate of the average cloud cluster properties and the heat and moisture balance of the environment, obtained from 1956 Marshall Islands data, is presented.

Yanai, M.↗
NASA NTRS1995

Bulk Properties of Ni3Al(gamma') With Cu and Au Additions

The BFS method for alloys is applied to the study of 200 alloys obtained from adding Cu and Au impurities to a Ni3Al matrix. We analyze the trends in the bulk properties of these alloys (heat of formation, lattice parameter, and bulk modulus) and detect specific alloy compositions for which these quantities have particular values. A detailed analysis of the atomic interactions that lead to the preferred ordering patterns is presented.

Bozzolo, Guillermo↗
NASA NTRS1988

Theoretical study of turbulent channel flow: Bulk properties, pressure fluctuations, and propagation of electromagnetic waves

In this paper, we apply two theoretical turbulence models, DIA and the recent GISS model, to study properties of a turbulent channel flow. Both models provide a turbulent kinetic energy spectral function E(k) as the solution of a non-linear equation; the two models employ the same source function but different closures. The source function is characterized by a rate n sub s (k) which is derived from the complex eigenvalues of the Orr--Sommerfeld (OS) equation in which the basic flow is taken to be of a Poiseuille type. The O--S equation is solved for a variety of Reynolds numbers corresponding to available experimental data. A physical argument is presented whereby the central line velocity characterizing the basic flow, U0 sup L, is not to be identified with the U0 appearing in the experimental Reynolds number. The theoretical results are compared with two types of experimental data: (1) turbulence bulk properties, and (2) properties that depend stongly on the structure of the turbulence spectrun at low wave numbers. The only existing analytical expression for Pi (k) cannot be used in the present case because it applies to the case of a flat plate, not a finite channel.

Canuto, V. M.↗
NASA NTRS1990

Theoretical study of turbulent channel flow - Bulk properties, pressure fluctuations, and propagation of electromagnetic waves

In this paper, we apply two theoretical turbulence models, DIA and the recent GISS model, to study properties of a turbulent channel flow. Both models provide a turbulent kinetic energy spectral function E(k) as the solution of a non-linear equation; the two models employ the same source function but different closures. The source function is characterized by a rate n sub s (k) which is derived from the complex eigenvalues of the Orr-Sommerfeld (OS) equation in which the basic flow is taken to be of a Poiseuille type. The O-S equation is solved for a variety of Reynolds numbers corresponding to available experimental data. A physical argument is presented whereby the central line velocity characterizing the basic flow, U0 sup L, is not to be identified with the U0 appearing in the experimental Reynolds number. The theoretical results are compared with two types of experimental data: (1) turbulence bulk properties, and (2) properties that depend strongly on the structure of the turbulence spectrum at low wave numbers. The only existing analytical expression for Pi (k) cannot be used in the present case because it applies to the case of a flat plate, not a finite channel.

Canuto, V. M.↗
NASA NTRS1996

Bulk Properties of Isentropic Mixing into the Tropics in the Lower Stratosphere

Timescales for mixing of midlatitude air into the tropical lower stratosphere are deduced from observations of long-lived tracers N2O and CCl3F. Bulk mixing between tropical and midlatitude regions is assumed to be isentropic and relatively slow compared with local mixing within each region. The mean value of the mixing timescale ranges from 12 to 18 months near 20 km. There is a tendency for shorter mixing times at higher and lower altitudes, although vertical profiles of mixing cannot be definitively established by the data. A more robust quantity is given by the fraction of midlatitude air entrained into the tropical upwelling region. Implied mixing fractions exceed 50% above 22 km.

Minschwaner, K.↗
NASA NTRS1990

Bulk properties and velocity distributions of water group ions at Comet Halley - Giotto measurements

In the region upstream of Comet Halley, pickup heavy ions of cometary origin were directly observed by the implanted ion spectrometer on Giotto. Diffusion of this population in pitch angle and in energy, during the approach to the comet and on the outbound leg is discussed. The two data sets are compared and qualitative ideas on scattering timescales are inferred. In addition the bulk parameters of these distributions have been computed and a comparison of the observed speed in the solar wind frame and the observed density with expectations is presented. Pitch angle scattering occurs more slowly than expected with filled shells appearing at 2,500,000 km, and significant energy diffusion does not occur until the bow shock region. Also the shell distributions downstream of the shock flow at the bispherical bulk speed (related to the Alfven speed) along the magnetic field with respect to the solar wind in accordance with conservation of energy between the pickup ions and the wave turbulence.

Coates, A. J.↗
NASA NTRS1978

The radial evolution of the bulk properties of the solar wind

Simultaneous solar-wind proton data obtained at several heliocentric distances during radial alignments are compared. The radial variations associated with two high-speed streams in the solar wind are studied as examples of the radial evolution of the solar-wind speed distribution and of high-speed streams in the solar wind as observed in the ecliptic plane in 1973. Pioneer 11 data on high-speed streams in the solar wind observed at about 1.5 and 3.7 AU are compared with the corresponding high-speed-stream data obtained at earth. These analyses indicate that as these high-speed streams propagated to these extended heliocentric distances, there was an erosion of the highest speeds and a general narrowing of the speed distribution. These observations are consistent with the exchange of momentum in the solar wind between high-speed streams and low-speed streams as they propagate outward from the sun.

Intriligator, D. S.↗
NASA NTRS1994

The X-ray AGN content of the Molonglo 408 MHz Survey: Bulk properties of previously optically identified sources

The cross-correlation of a source list from the ROSAT All Sky Survey with the Molonglo 408 MHz Survey (MRC) yields a calalogue of 549 sources. The majority of the objects are quasars and radio galaxies with known optical counterparts, most of them detected in X-rays for the first time. More than one third of the objects are optically unidentified. In this paper we will present a discussion of the representative properties of the 337 previously optically identified active galactic nuclei (AGN). We find strong correlations between luminosities in the radio, optical, and X-ray bands which differ for quasars and radio galaxies. Several of the statistical source characteristics seem not to support simple unification schemes. However, for many objects some of their key properties like redshift, radio morphology and environmental conditions are not known yet. The fraction of X-ray detected quasars in the MRC is around 30%, higher than that of radio galaxies (less tha 8%). It is not currently known which intrinsic properties are responsible for the X-ray loudness of these radio objects. We further have evidence for a considerable number of objects being radio- and X-ray loud, but optically very faint.

Brinkmann, W.↗
NASA NTRS2002

Atomistic Modeling of Surface and Bulk Properties of Cu, Pd and the Cu-Pd System

The BFS (Bozzolo-Ferrante-Smith) method for alloys is applied to the study of the Cu-Pd system. A variety of issues are analyzed and discussed, including the properties of pure Cu or Pd crystals (surface energies, surface relaxations), Pd/Cu and Cu/Pd surface alloys, segregation of Pd (or Cu) in Cu (or Pd), concentration dependence of the lattice parameter of the high temperature fcc CuPd solid solution, the formation and properties of low temperature ordered phases, and order-disorder transition temperatures. Emphasis is made on the ability of the method to describe these properties on the basis of a minimum set of BFS universal parameters that uniquely characterize the Cu-Pd system.

Bozzolo, Guillermo↗
NASA NTRS2020

A Flexible Parameterization for Shortwave and Longwave Optical Properties of Ice Crystals and Derived Bulk Optical Properties for Climate Models

We provide a parameterization of the extinction efficiency, single scattering albedo and asymmetry parameter of single ice crystals with any combination of particle volume, projected area, component aspect ratio and crystal distortion at any wavelength between 0.2 and 100 mm. The paramerization is an extension of the one previously published by van Diedenhoven et al. (2014, https://doi.org/10.1175/JAS-D-13-0205.1). In addition, the parameterized optical properties are integrated over size distributions yielding bulk extinction efficiencies, single scattering albedos and asymmetry parameters for large ranges of effective radii, particle component aspect ratios and crystal distortion values. The parameterization of single particle optical properties is evaluated with a reference database. The bulk optical properties are evaluated against the ice model selected for the Moderate Resolution Imaging Spectroradiometer (MODIS) Collection 6 products, for which accurate optical properties are available. Mean absolute errors in parameterized extinction efficiency, asymmetry parameter and single scattering albedo are shown to be 0.0272, 0.00890 and 0.00468, respectively for shortwave wavelengths, while they are 0.0641, 0.0368 and 0.0200 in the longwave. Shortwave and longwave asymmetry parameter and single scattering albedos are shown to vary strongly with particle component aspect ratio and distortion, resulting in substantial variation in shortwave fluxes, but relatively small variations in longwave cloud emissivity. The parameterization and bulk optical properties are made publicly available.

Bastiaan Van Diedenhoven↗
NASA NTRS1991

A new approximate sum rule for bulk alloy properties

A new, approximate sum rule is introduced for determining bulk properties of multicomponent systems, in terms of the pure components properties. This expression is applied for the study of lattice parameters, cohesive energies, and bulk moduli of binary alloys. The correct experimental trends (i.e., departure from average values) are predicted in all cases.

Bozzolo, Guillermo↗
NASA NTRS1992

A new approximate sum rule for bulk alloy properties

A new, approximate sum rule is introduced for determining bulk properties of multicomponent systems, in terms of the pure components properties. This expression is applied for the study of lattice parameters, cohesive energies, and bulk moduli of binary alloys. The correct experimental trends (i.e., departure from average values) are predicted in all cases.

Bozzolo, Guillermo↗
NASA NTRS1983

Comparison of three methods for measuring acoustic properties of bulk materials

Three methods for measuring the acoustic properties of bulk materials have been evaluated. The methods differ from one another in their practical implementation and reliability. The two more convenient methods exploit changes in surface impedance of test samples resulting from a change in the test sample geometry or boundary conditions. The results from these surface methods are compared with that obtained using Scott's method. In Scott's method the propagation constant is obtained by a 'direct' measurement inside the test material by means of a probe tube. The comparisons suggest that the surface methods will provide reliable and accurate results when the test sample behaves as a rigid porous structure.

Smith, C. D.↗
NASA NTRS1990

Voyager 2's encounter with the gas giants

The findings made by Voyager 2 as it passed by the gas giants are reviewed. The unexpected problems that had to be overcome during the mission, including receiver failure and scan platform problems, are described. The scientific instrumentation aboard Voyager is briefly examined, and the major types of Voyager scientific investigations and principal investigators are listed. The scientific findings regarding the atmospheres, thermal properties, electromagnetic environments, ring systems, satellite surfaces, body properties, and bulk properties are examined.

Miner, Ellis D.↗
NASA NTRS2000

AC Calorimetry and Thermophysical Properties of Bulk Glass-Forming Metallic Liquids

Thermo-physical properties of two bulk metallic glass forming alloys, Ti34Zr11Cu47Ni8 (VIT 101) and Zr57Nb5Ni12.6Al10CU15.4 (VIT 106), were investigated in the stable and undercooled melt. Our investigation focused on measurements of the specific heat in the stable and undercooled liquid using the method of AC modulation calorimetry. The VIT 106 exhibited a maximum undercooling of 140 K in free radiative cooling. Specific heat measurements could be performed in stable melt down to an undercooling of 80 K. Analysis of the specific heat data indicate an anomaly near the equilibrium liquidus temperature. This anomaly is also observed in y the temperature dependencies of the external relaxation time, the specific volume, and the surface tension; it is tentatively attributed to a phase separation in the liquid state. The VIT 101 specimen exhibited a small undercooling of about 50 K. Specific heat measurements were performed in the stable and undercooled melt. These various results will be combined with ground based work such as the measurement of T-T-T curves in the electrostatic levitator and low temperature viscosity and specific heat measurements for modeling the nucleation kinetics of these alloys.

Johnson, William L.↗