Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “brush”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Some metallographic results for brush bristles and brush segments of a shroud ring brush seal tested in a T-700 engine

Post-test investigation of a T-700 engine brush seal found regions void of bristles ('yanked out'), regions of bent-over bristles near the inlet, some 'snapped' bristles near the fence, and a more uniform smeared bristle interface between the first and last axial rows of bristles. Several bristles and four brush segments were cut from the brush seal, wax mounted, polished, and analyzed. Metallographic analysis of the bristle near the rub tip showed tungsten-rich phases uniformly distributed throughout the bristle, no apparent change within 1 mu m of the interface, and possibly a small amount of titanium, which would represent a transfer from the rotor. Analysis of the bristle wear face showed nonuniform tungsten, which is indicative of material resolidification. The cut end contained oxides and internal fractures; the worn end was covered with oxide scale. Material losses due to wear and elastoplastic deformation within the shear zone and third-body lubrication effects in the contact zone are discussed.

Hendricks, Robert C.↗

Improving Brush Polymer Infrared One-Dimensional Photonic Crystals via Linear Polymer Additives

Brush block copolymers (BBCPs) enable the rapid fabrication of self-assembled one-dimensional photonic crystals with photonic band gaps that are tunable in the UV-vis-IR, where the peak wavelength of reflection scales with the molecular weight of the BBCPs. Due to the difficulty in synthesizing very large BBCPs, the fidelity of the assembled lamellar nanostructures drastically erodes as the domains become large enough to reflect IR light, severely limiting their performance as optical filters. To overcome this challenge, short linear homopolymers are used to swell the arrays to ~180% of the initial domain spacing, allowing for photonic band gaps up to~1410 nm without significant opacity in the visible, demonstrating improved ordering of the arrays. Additionally, blending BBCPs with random copolymers enables functional groups to be incorporated into the BBCP array without attaching them directly to the BBCPs. The addition of short linear polymers to the BBCP arrays thus offers a facile means of improving the self-assembly and optical properties of these materials, as well as adding a route to achieving films with greater functionality and tailorability, without the need to develop or optimize the processing conditions for each new brush polymer synthesized.

Macfarlane, Robert J.↗

Antielectrophoretic Response-Driven Bending–Tilting Deformation of Cationic Polyelectrolyte Brushes Drives Nonlinear Electroosmotic Transport in Brush-Grafted Nanochannels

In this paper, we use all-atom molecular dynamics (MD) simulations to describe a non-linearly enhanced electroosmotic (EOS) flow, where, in a nanochannel grafted with cationic PMETAC ([Poly(2-(Methacryloyloxy)Ethyl) Trimethylammonium Chloride]) brushes, a two-fold increase in the electric field strength leads to a several-fold (more than two-fold) increase in the EOS flow strength and volume flow rate. The electric field enforces the PMETAC brushes to undergo a bending-tilting driven deformation with a significant portion of the brush layer becoming parallel to the grafting surface. In response, a substantial fraction of the counterions leave the brush layer (hence become more mobile), but instead of going into the bulk, accumulate at the brush-bulk interface, i.e., stay in proximity of the brush segments aligned parallel to the grafting surface. This creates an interesting situation, where the counterions are not completely within the brush layer, yet they fully screen the brush charges. Such “freer” conditions enable the counterions to achieve very high velocity, thereby ensuring that the water solvating the counterions themselves move very fast triggering the significantly augmented EOS transport. Probing deeper we can identify that the bending-tilting driven brush deformation, enforcing the brushes to align parallel to the substrate, results from the anti-electrophoretic behavior of the brushes, where despite being positively charged, the brushes move against the electric field direction. Such an anti-electrophoretic behavior of the PE brushes, which has not been reported before, can be associated with the very fast velocities of the negatively charged counterions and the electrostatic and hydrodynamic coupling of the counterions with the positive functional groups of the brushes. Here, we anticipate that the findings of this paper will shed light on strategies for nanochannel flow, the anti-electrophoretic response of charged polymer chains, and the significance of capturing the detailed chemical architecture of polyelectrolytes in nanoscale science and engineering.

36 MATERIALS SCIENCE↗

Explicit Solvent Simulations of Friction between Brush Layers of Charged and Neutral Bottle-Brush Macromolecules

We study friction between charged and neutral brush layers of bottle-brush macromolecules using molecular dynamics simulations. In our simulations the solvent molecules were treated explicitly. The deformation of the bottle-brush macromolecules under the shear were studied as a function of the substrate separation and shear stress. For charged bottle-brush layers we study effect of the added salt on the brush lubricating properties to elucidate factors responsible for energy dissipation in charged and neutral brush systems. Our simulations have shown that for both charged and neutral brush systems the main deformation mode of the bottle-brush macromolecule is associated with the backbone deformation. This deformation mode manifests itself in the backbone deformation ratio, , and shear viscosity, , to be universal functions of the Weissenberg number W. The value of the friction coefficient, , and viscosity, , are larger for the charged bottle-brush coatings in comparison with those for neutral brushes at the same separation distance, D, between substrates. The additional energy dissipation generated by brush sliding in charged bottle-brush systems is due to electrostatic coupling between bottle-brush and counterion motion. This coupling weakens as salt concentration, cs, increases resulting in values of the viscosity, , and friction coefficient, , approaching corresponding values obtained for neutral brush systems.

Carrillo, Jan-Michael↗

All-atom molecular dynamics simulations of weak polyionic brushes: influence of charge density on the properties of polyelectrolyte chains, brush-supported counterions, and water molecules

All atom molecular dynamics (MD) simulations of planar Na+-counterion-neutralized polyacrylic acid (PAA) brushes are performed for varying degrees of ionization (and thereby varying charge density) and varying grafting density. Variation in the PE charge density (or degree of ionization) and grafting density leads to massive changes of the properties of the PE molecules (quantified by the changes in the height and the mobility of the PE brushes) as well as the local arrangement and distribution of the brush-supported counterions and water molecules within the brushes. The effect on the counterions is manifested by the corresponding variation of the counterion mobility, counterion concentration, extent of counterion binding to the charged site of the PE brushes, water-in-salt-like structure formation, and counterion-water–oxygen radial distribution function within the PE brushes. On the other hand, the effect on water molecules is manifested by the corresponding variation of water–oxygen–water–oxygen RDF, local water density, water–water and water–PE functional group hydrogen bond networks, static dielectric constant of water molecules, orientational tetrahedral order parameter, and water mobility. Enforcing such varying degree of ionization of weak polyelectrolytes is possible by changing the pH of the surrounding medium. Thus, our results provide insights into the changes in microstructure (at the atomistic level) of weak polyionic brushes at varying pH. Finally, we anticipate that this knowledge will prove to be vital for the efficient design of several nano-scale systems employing PE brushes such as nanomechanical gates, current rectifiers, etc.

42 ENGINEERING↗

Accelerated Self-Healing and Property Recovery in Brush Particle Solids Featuring Brush Dispersity

Brush particles, hybrid materials consisting of polymer chains tethered to particle surfaces, offer tunable properties that make them promising candidates for advanced functional materials. This study investigated the role of chain dispersity in the viscoelastic self-healing of poly (methyl acrylate) (PMA)-based brush particle solids. Increasing the molecular weight dispersity of grafted chains significantly enhanced both strain-to-fracture and toughness of brush particle solids, while the elastic modulus and glass transition temperature were independent of chain dispersity. Cut-and-adhere testing revealed a significant acceleration of the rate of toughness recovery in high-dispersity systems as compared to low-dispersity analogs for which toughness recovery markedly lagged the recovery of Young’s modulus. The results suggest that structure and property recovery in brush particle solids are sensitive to the dynamical heterogeneity of brush canopies and highlight the role of molecular weight dispersity as a design parameter to enable hybrid materials with advanced self-healing ability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aggregation control in natural brush-printed conjugated polymer films and implications for enhancing charge transport

Shear-printing of electroactive polymers using natural brushes is a promising film deposition technique for printed electronics capable of microstructure control and electrical properties enhancement over large areas. Nevertheless, the interplay between film printing parameters, microstructure development, and charge transport is not well-understood. We report that natural brush-printing greatly enhances charge transport by as much as 5.7× through control of polymer nanofibril aggregate growth and backbone alignment, attributable to the oriented squamae of the natural hair. However, while brush shear-induced aggregation enhances charge transport, we show that backbone alignment alone does not guarantee charge transport anisotropy. These results provide additional understanding of shear-induced enhanced charge transport and set processing guidelines for high-performance printed organic circuitry.

natural brush-printing↗

Fluctuation Effects on the Brush Structure of Mixed Brush Nanoparticles in Solution

A potentially attractive way to control nanoparticle assembly is to graft one or more polymers on the nanoparticle, to control the nanoparticle–nanoparticle interactions. When two immiscible polymers are grafted on the nanoparticle, they can microphase separate to form domains at the nanoparticle surface. Here, we computationally investigate the phase behavior of such binary mixed brush nanoparticles in solution, across a large and experimentally relevant parameter space. Specifically, we calculate the mean-field phase diagram, assuming uniform grafting of the two polymers, as a function of the nanoparticle size relative to the length of the grafted chains, the grafting density, the enthalpic repulsion between the grafted chains, and the solvent quality. We find a variety of phases including a Janus phase and phases with varying numbers of striped domains. Using a nonuniform, random distribution of grafting sites on the nanoparticle instead of the uniform distribution leads to the development of defects in the mixed brush structures. Introducing fluctuations as well leads to increasingly defective structures for the striped phases. Furthermore, we find that the simple Janus phase is preserved in all calculations, even with the introduction of nonuniform grafting and fluctuations. We conclude that the formation of the Janus phase is more realistic experimentally than is the formation of defect-free multivalent mixed brush nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of a Brush Seals Program Leading to Ceramic Brush Seals

Some events of a U.S. Army/NASA Lewis Research Center brush seals program are reviewed, and the development of ceramic brush seals is described. Some preliminary room-temperature flow data are given, and the results of testing metallic brushes in cryogenic nitrogen are discussed.

Hendricks, Robert C.↗

Core–Shell Structure and Aggregation Number of Micelles Composed of Amphiphilic Block Copolymers and Amphiphilic Heterografted Polymer Brushes Determined by Small-Angle X-ray Scattering

A large group of functional nanomaterials employed in biomedical applications, including targeted drug delivery, relies on amphiphilic polymers to encapsulate therapeutic payloads via self-assembly processes. Knowledge of the micelle structures will provide critical insights into design of polymeric drug delivery systems. Core–shell micelles composed of linear diblock copolymers poly(ethylene glycol)-b-poly(caprolactone) (PEG-b-PCL), poly(ethylene oxide)-b-poly(lactic acid) (PEG-b-PLA), as well as a heterografted brush consisting of a poly(glycidyl methacrylate) backbone with PEG and PLA branches (PGMA-g-PEG/PLA) were characterized by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) measurements to gain structural information regarding the particle morphology, core–shell size, and aggregation number. The structural information at this quasi-equilibrium state can also be used as a reference when studying the kinetics of polymer micellization.

36 MATERIALS SCIENCE↗

Metallographic Analysis of Brush Bristle and Integrity Testing of Brush Seal in Shroud Ring of T-700 Engine

Post-test investigation of a T-700 engine brush seal found regions void of bristles ('yanked out'), regions of bent-over bristles near the inlet, some 'snapped' bristles near the fence, and a more uniform 'smeared' bristle interface between the first and last axial rows of bristles. Several bristles were cut from the brush seal, wax mounted, polished, and analyzed. Metallographic analysis of the bristles near the rub tip showed tungsten-rich phases uniformly distributed throughout the bristle with no apparent change within 1 to 2 micron of the interface except for possibly a small amount of titanium, which would represent a transfer from the rotor. Analysis of the bristle wear face showed nonuniform tungsten, which is indicative of material resolidification. The cut end contained oxides and internal fractures; the worn end was covered with oxide scale. Material losses due to wear and elastoplastic deformation within the shear zone and third-body lubrication effects in the contact zone are discussed.

Hendricks, Robert C.↗