Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boresight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

A Boresight Adjusment Mechanism For Use in Laser Altimeters

This paper describes the development of the Boresight Adjustment Mechanism (BAM) for the Geoscience Laser Altimeter System (GLAS) Instrument. The BAM was developed late in the integration and test phase of the GLAS instrument flight program. Thermal vacuum tests of the GLAS instrument indicated that the instrument-boresight alignment stability over temperature may be marginal. To reduce the risk that GLAS may not be able to meet the boresight alignment requirements an intensive effort was started to develop a BAM. Observatory-level testing and further evaluation of the boresight alignment data indicated that sufficient margin could be obtained utilizing existing instrument resources and therefore the BAM was never integrated onto the GLAS Instrument. However, the BAM was designed fabricated and fully qualified over a 4 month timeframe to be capable of precisely steering (less than 2 arcsec over plus or minus 300 arcsec) the output of three independent lasers to ensure the alignment between the transmit and receive paths of the GLAS instrument. The short timeline for the development of the mechanism resulted in several interesting design solutions. This paper discusses the requirement definition design, and testing processes of the BAM development effort how the design was affected by the extremely tight development schedule and the lessons learned throughout the process.

Hakun, Claef↗
NASA NTRS2004

A Boresight Adjustment Mechanism for use on Laser Altimeters

This paper describes the development of the Boresight Adjustment Mechanism (BAM) for the Geoscience Laser Altimeter System (GLAS) Instrument. The BAM was developed late in the integration and test phase of the GLAS instrument flight program. Thermal vacuum tests of the GLAS instrument indicated that the instrument boresight alignment stability over temperature may be marginal. To reduce the risk that GLAS may not be able to meet the boresight alignment requirements, an intensive effort was started to develop a BAM. Observatory-level testing and further evaluation of the boresight alignment data indicated that sufficient margin could be obtained utilizing existing instrument resources and therefore the BAM was never integrated onto the GLAS Instrument. However, the BAM was designed fabricated and fully qualified over a 4 month timeframe to be capable of precisely steering (< 1 arcsec over 300 arcsec) the output of three independent lasers to ensure the alignment between the transmit and receive paths of the GLAS instrument. The short timeline for the development of the mechanism resulted in several interesting design solutions. This paper discusses the requirement definition, design, and testing processes of the BAM development effort, how the design was affected by the extremely tight development schedule, and the lessons learned throughout the process.

Hakun, Claef↗
NASA NTRSDate not supplied

Hazard Boresight Relative Navigation for Safe Lunar Landing

Hazard Boresight Relative Navigation greatly simplifies Hazard Detection and Avoidance methodologies by providing a common interface between the Hazard DEM, the Safe Site Selection Algorithm, the size of the landing ellipse, the divert distance and the Guidance targeting algorithm. After the Safe Site is selected from the DEM, Hazard Boresight Relative Navigation will replace the original planet target with the boresight target. The location of the safe site relative to the boresight is sent back to GNC for the divert maneuver.

Stephen R. Steffes↗
NASA NTRS1976

Radio frequency boresight analysis of the low cost 64-meter antenna

Configurations (two) of the reflector-only assemblies, using different width backup cones, are analyzed for RF boresight direction changes and wind distortions. The wider backup cone is best for minimum weight; however, there is an optimum weight which minimizes the RF boresight errors for a wind load that produces the maximum pitching moment of both configurations.

Katow, M. S.↗
NASA NTRS1986

Sensitivity of synthetic aperture radar boresight orientation to orbit parameters

Attendant upon the use of synthetic aperture radar (SAR) in upcoming planetary missions, is the need to assess errors in the pointing angles of the instrument boresight due to spacecraft ephemeris errors. Developed herein are the constrained analytic partials of these boresight angles not only with respect to a motion-related, cartesian frame but also with respect to classical orbital elements. While both systems have great utility for spacecraft based instruments, the former system should prove useful for SAR instruments on aircraft.

Russell, R. K.↗
NASA NTRS1987

Sun sensor boresight alignment testing for the Halogen Occultation Experiment

The boresight alignment testing for the sun sensor assembly on the Halogen Occultation Experiment (HALOE) is described. The sun sensor assembly consists of three sensors that provide feedback signals for controlling dual axes gimbals. Two energy balancing silicon detectors are operated as wideband sensors in the azimuth and elevation axes. The third sensor is a silicon photodiode array operated as a narrow-band sensor in the elevation axis. These sensors are mounted on a common Invar structure which is mounted to the HALOE telescope. A blackbody was used as the stimulating source to perform the initial boresight alignment and this was checked with a heliostat solar look and a direct solar look. These tests are explained with a comparison between each source used.

Moore, A. S.↗
NASA NTRS1992

Analysis and applications of a general boresight algorithm for the DSS-13 beam waveguide antenna

A general antenna beam boresight algorithm is presented. Equations for axial pointing error, peak received signal level, and antenna half-power beamwidth are given. A pointing error variance equation is derived that illustrates the dependence of the measurement estimation performance on the various algorithm inputs, including RF signal level uncertainty. Plots showing pointing error uncertainty as function of algorithm inputs are presented. Insight gained from the performance analysis is discussed in terms of its application to the areas of antenna controller and receiver interfacing, pointing error compensation, and antenna calibrations. Current and planned applications of the boresight algorithm, including its role in the upcoming Ka-band downlink experiment (KABLE), are highlighted.

Alvarez, L. S.↗
NASA NTRSDate not supplied

Hazard Boresight Relative Navigation for Safe Lunar Landing

In the area of planetary landing, hazard detection and avoidance is the act of driving a vehicle to a safe landing area using onboard resources. A hazard detection sensor is used to scan the terrain and these measurements are evaluated to determine where the safe landing sites are located. The selected site is generally not the same as the nominal target, so the vehicle must divert to the new site. This activity involves the interaction between several components, including a suite of onboard GNC algorithms that work together to efficiently choose and divert to a new site. This paper presents the Hazard Boresight Relative Navigation concept, which is a method that provides a common interface between the hazard scan, safe-site selection algorithm, size of the target-relative landing ellipse, divert offset distance and guidance targeting algorithm. After the safe-site is selected from the hazard scan, the original inertial target is replaced with a vehicle-relative target, which is initialized by a measurement from the hazard scan. The new target-relative position state is estimated over time in the navigation filter, and is fed to the guidance algorithm to perform the divert maneuver. In addition to detailing the Hazard Boresight Relative Navigation concept, this paper also presents some general landing terms that can be used in the greater discussion, as well as analysis on how to estimate and predict the vehicle footprint dispersion ellipse during flight, which is used in the safe-site selection algorithm.

Stephen R. Steffes↗
NASA NTRSDate not supplied

Hazard Boresight Relative Navigation for Safe Lunar Landing

In the area of planetary landing, hazard detection and avoidance is the act of driving a vehicle to a safe landing area using onboard resources. A hazard detection sensor is used to scan the terrain and these measurements are evaluated to determine where the safe landing sites are located. The selected site is generally not the same as the nominal target, so the vehicle must divert to the new site. This activity involves the interaction between several components, including a suite of onboard GNC algorithms that work together to efficiently choose and divert to a new site. This paper presents the Hazard Boresight Relative Navigation concept, which is a method that provides a common interface between the hazard scan, safe-site selection algorithm, size of the target-relative landing ellipse, divert offset distance and guidance targeting algorithm. After the safe-site is selected from the hazard scan, the original inertial target is replaced with a vehicle-relative target, which is initialized by a measurement from the hazard scan. The new target-relative position state is estimated over time in the navigation filter, and is fed to the guidance algorithm to perform the divert maneuver. In addition to detailing the Hazard Boresight Relative Navigation concept, this paper also presents some general landing terms that can be used in the greater discussion, as well as analysis on how to estimate and predict the vehicle footprint dispersion ellipse during flight, which is used in the safe-site selection algorithm.

Stephen Steffes↗
NASA NTRS1984

Structural design of a vertical antenna boresight 18.3 by 18.3-m planar near-field antenna measurement system

A large very precise near-field planar scanner was proposed for NASA Lewis Research Center. This scanner would permit near-field measurements over a horizontal scan plane measuring 18.3 m by 18.3 m. Large aperture antennas mounted with antenna boresight vertical could be tested up to 60 GHz. When such a large near field scanner is used for pattern testing, the antenna or antenna system under test does not have to be moved. Hence, such antennas and antenna systems can be positioned and supported to simulate configuration in zero g. Thus, very large and heavy machinery that would be needed to accurately move the antennas are avoided. A preliminary investigation was undertaken to address the mechanical design of such a challenging near-field antenna scanner. The configuration, structural design and results of a parametric NASTRAN structural optimization analysis are contained. Further, the resulting design was dynamically analyzed in order to provide resonant frequency information to the scanner mechanical drive system designers. If other large near field scanners of comparable dimensions are to be constructed, the information can be used for design optimization of these also.

Sharp, G. R.↗