Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “black carbon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Evaluation of a catalytically aided thermal regeneration method for quartz filter-based black carbon sensing

Black carbon (BC)–a strong indicator of diesel particulate matter and other sources of incomplete carbonaceous fuel combustion–is an important air pollutant that affects public health, yet low-cost sensors capable of long-term, autonomous BC monitoring remain underdeveloped. We report on the development and evaluation of a novel BC prototype sensor that integrates soot collection on a quartz filter, in-situ optical transmission measurement, and thermal filter regeneration. To enable regeneration at lower temperatures, we evaluated the catalytic effects of various alkali metal salts pre-applied to the filter. Among these, cesium carbonate (Cs 2 CO 3 ) exhibited the strongest catalytic activity, lowering the temperature required for complete BC removal by up to 190 °C and reducing energy consumption by more than 75% compared to that required for untreated filters. The catalytic effect persisted through 10 BC collection–regeneration cycles. These findings demonstrate the potential of catalytically aided thermal regeneration in BC sensors and suggest a pathway toward energy-efficient and reduced maintenance air quality monitoring suitable for distributed BC monitoring networks.

Tang, Xiaochen [Lawrence Berkeley National Laborat↗
DOE OSTI2025

Improved representation of black carbon mixing structures suggests stronger direct radiative heating

Black carbon significantly influences the Earth system because of its strong solar radiation absorption. However, its direct radiative effect remains poorly understood in current climate models, partly because current climate models oversimplify the diverse structures formed when black carbon mixes with other atmospheric components. Here we show that incorporating more realistic, multi-mixing-structure representations of black carbon increases the direct radiative effect. We find that aged black carbon particles, with thicker coatings and higher embedded fractions, enhance the direct radiative effect more efficiently. Using machine learning alongside the Community Earth System Model, we show that the direct radiative effect at the top of the atmosphere in regions with heavy black carbon pollution is 31.6% greater when multi-mixing structures are considered. These findings highlight the importance of modeling complex mixing structures of particle-resolved black carbon to accurately capture their warming impacts on global atmosphere, particularly in highly polluted regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

China's Contribution to Arctic Black Carbon Declined From 2009 to 2022

Black carbon (BC) aerosol is an important driver of Arctic warming, and China used to be a major contributor to the Arctic BC burden through long-range atmospheric transport. Here we show that China's contribution declined significantly from 2009 to 2022, primarily due to reductions in domestic BC emissions following the implementation of clean air policies. Global chemistry-transport model simulations indicate a relative decline of ∼3% yr −1 ( p < 0.05) in China's Arctic BC contribution, exceeding the decrease rate in the underlying emission inventory. Sensitivity simulations further suggest that climate change-induced shifts in atmospheric transport may have amplified this decline. Observations of aerosol absorption coefficients (σ ap ) at Arctic background observatories revealed steeper declines in σ ap when modeled China-to-total BC ratios were higher. Moreover, σ ap correlated positively with modeled BC from China, with stronger relationships as the modeled China-to-total BC ratios increased. Together, these results provide robust evidence that China's emission reductions have diminished its role in Arctic BC, contributing an estimated 0.02 W m −2 decrease in the direct radiative effect during the Arctic haze season.

GEOS-chem model↗
DOE OSTI2025

Constraining Black Carbon Aging in Global Models to Reflect Timescales for Internal Mixing

The radiative effects of black carbon depend critically on its atmospheric lifetime, which is controlled by the rate at which freshly emitted combustion particles become internally mixed with other aerosol components. Global aerosol models strive to represent this process, but the timescale for aerosol mixing is not easily constrained using observations. In this study, we apply a timescale parameterization derived from particle‐resolved simulations to quantify, in a global aerosol model, the timescale for internal mixing. We show that, while highly variable, the average timescale for internal mixing is approximately 3 hr, which is much shorter than the 24‐hr aging timescale traditionally applied in bulk aerosol models. We then use the mixing timescale to constrain the aging criterion in the Modal Aerosol Module. Our analysis reveals that, to best reflect timescales for internal mixing, modal models should assume that particles transition from the hydrophobic (fresh) to the hydrophilic (aged) class once they accumulate a coating thickness equal to four monolayers of sulfuric acid, as opposed to the model's current aging criterion of eight monolayers. We show that, in remote regions like the Arctic and Antarctic, predictions of black carbon loading and its seasonal variation are particularly sensitive to the model representation of aging. By constraining aging in global models to reflect mixing timescales simulated by the particle‐resolved model, we eliminate one of the free parameters governing black carbon's long‐range transport and spatiotemporal distribution.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Surfactant Effects on Carbon Black Slurries for Aqueous Flow-Electrode Applications

Aqueous carbon black (CB) slurries are promising for flow-electrode applications due to their low cost and high electrical conductivity. Here, in this study, we investigate the impact of introducing a nonionic surfactant (Tween 20) on the rheological and electrical properties of 5 wt % Vulcan XC72R CB slurries in a 50 mM NaCl aqueous solution. We observe a Tween 20 critical concentration around 1.2 wt % that triggers an abrupt transition from a conductive gel to a high-resistance Newtonian fluid. This sudden network collapse coincides with a 250-fold reduction in settled mass, a 1–2 order of magnitude drop in viscosity, and a nearly 100-fold decrease in slurry conductivity. Centrifuged pellet conductivity measurements support the conclusion that this performance loss is largely due to the destruction of the gel network, rather than increased particle-to-particle resistance. SEM imaging suggests that the network is built from large 10 to 50 μm agglomerates that are fully dissolved above the critical surfactant concentration. We found that subcritical surfactant addition improved slurry shelf stability over 90 days, but that electrochemical cell testing revealed progressive performance degradation during operation. These results highlight the need for strategies that maximize long-term electrical conductivity without compromising viscosity, sedimentation stability, or resistance to accumulation on internal surfaces.

Materials science↗
DOE OSTI2025

Radiocarbon Fingerprinting Black Carbon Source History in the Himalayas

Abstract Black carbon (BC) is considered as an important contributor to the Himalayan glaciers melt in the past few decades. However, the long‐term source apportionment of BC remains unclear. Here we present the first radiocarbon ( 14 C)‐based annual variation of BC source apportionment in an ice core spanning the period of 1959–2012 drilled from the Southeastern Tibetan Plateau, a receptor site of South Asia outflow. We find fossil fuel combustion is a major contribution (73% ± 5%), yet the biomass burning fraction ( ƒ biomass ) has grown from 24% ± 4% to 30% ± 4% since 1990. Intriguingly, we further find the ƒ biomass demonstrating a robust correlation with South Asian wildfires linked to climate oscillations. Thus, for mitigating BC impacts on Himalayan glaciers, South Asia's transition from fossil fuels to clean energy is a more efficient and urgent strategy than reducing residential biomass burning.

Wang, Mo [State Key Laboratory of Tibetan Plateau ↗
DOE OSTI2025

Steady-state mixing state of black carbon aerosols from a particle-resolved model

Abstract. Black carbon (BC) exerts a notable warming effect due to its strong light absorption, largely influenced by its “mixing state”. However, due to computational constraints, the mixing state is challenging to accurately represent in large-scale models. In this study, we employ a particle-resolved model to simulate the evolution of BC mixing state based on field observation. Our result shows that aerosol compositions, coating thickness (CT) distribution, and optical properties of BC aerosols all exhibit a tendency toward a steady state with a characteristic timescale of less than 1 d, considerably shorter than the BC atmospheric lifetime. The rapid attainment of a steady state suggests that it is reasonable to disregard this pre-steady-state period and instead concentrate on the average properties of BC across extensive spatial and temporal scales. The distribution of CT follows an exponential linear distribution and can be characterized by a single slope parameter k. This distribution is independent of the BC core's distribution. In the model simulation, the mean CT, equivalent to the 1/k, is 62 nm, which is consistent with the statistical results indicating a mean CT of 63 nm. Utilizing the slope parameter k, which effectively characterizes the CT distribution under the steady-state simplifying assumption, the BC absorption enhancement closely corresponds to the results obtained via the particle-resolved method. This study simplifies the BC mixing state description and yields a precise evaluation of the BC optical properties, which has the potential utility for modeling efforts in the refinement of the assessment of BC's radiative effects.

Zhang, Zhouyang↗
DOE OSTI2025

Continuum laser absorption spectroscopy of C 2 (a 3 Π u ) in a sublimating cloud of carbon black

A direct optical absorption diagnostic has been developed for rotationally resolved measurements of diatomic carbon (a 3 Π u →d 3 Π g (0,0) and (1,1)) at a repetition rate of 525 kHz and resolution of 7.3 pm over the range of 511.1–514.1 nm. The diagnostic utilizes a high-power pulsed continuum laser light source dispersed in a spectrograph and imaged by a high-speed camera. Measurements have been performed that capture the temporal evolution of C 2 number density and temperature of a cloud of carbon black sublimating in shock heated gas at high temperature and pressure (T = 5500 K, P = 3.7 atm). A simultaneous light absorption measurement of the condensed phase enables comparisons of the gaseous C 2 number density to the condensed phase mass. The continuum laser absorption diagnostic is applied to C 2 in this work but shows promise in being a simple “drop-in” system for absorption spectroscopy in the visible range at rapid repetition rates and high dispersion, filling an important gap for laser diagnostic systems.

Willhardt, Colton Dean [Univ. of Illinois at Urban↗
DOE OSTI2025

Non-catalytic pyrolysis of associated gas to zero CO 2 hydrogen and high value carbon black

The overall objective of this work is to perform a pre-Front End Engineering Design (pre-FEED) study of the conversion of associated gas produced at an active oil pad of a Bakken oil field producer, to high value carbon black and hydrogen using the Microwave Plasma Pyrolysis of Associated Gas (MPP-AG) process developed by H Quest Vanguard, Inc (HQV). The University of North Dakota’s Center for Process Engineering Research (CPER) collaborated with HQV to complete a design and techno-economic analysis for the MPP-AG deployed at an active Bakken well site flaring an average of 54,000 standard cubic feet per day of AG. The proposed design consists of: • A Microwave Pyrolysis Unit (MPU) which consists of H Quest’s proprietary MPP technology • A patent-pending Gas Conditioning Unit (GCU) designed by the University of North Dakota to condition intermittent and variable flow gas prior to pyrolysis. • An auxiliary unit running on the associated gas to power the GCU and MPU in an “island mode” configuration.

03 NATURAL GAS↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- SP2 Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured refractory black carbon with a single particle soot photometer (SP2) at the ARM facility’s North Slope of Alaska site. Measurements were made at the meteorological tower between 9 Sept and 27 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Black carbon mass concentration↗
DOE OSTI2026

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- ACSM Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. In support of black carbon (SP2) and particles (UHSAS) flux measurements at the meteorological tower, we measured non-refractory chemically-speciated aerosol composition with an Aerosol Chemical Speciation Monitor at the the NSA Central Facility (C1). ACSM measurements were made between 9 Sept and 26 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Chl_ACSM↗
DOE OSTI2026

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- ACSM Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. In support of black carbon (SP2) and particles (UHSAS) flux measurements at the meteorological tower, we measured non-refractory chemically-speciated aerosol composition with an Aerosol Chemical Speciation Monitor at the the NSA Central Facility (C1). ACSM measurements were made between 9 Sept and 26 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Aerosol Chemical Speciation Monitor↗
DOE OSTI2026

Measured indoor PM2.5, black carbon, and oxidative potential before and after replacing gas with induction cooking in asthmatic households

Cooking is a major source of fine particulate matter (PM) in homes and evidence to date is inconclusive about the impact of cooking fuel on measures of residential PM exposure. The Cooking Energy and Ventilation Impacts on Children's Asthma (CEVICA) study measured cooking frequency, range hood use, indoor air quality (IAQ) and respiratory health indicators of children with asthma living in homes with gas stoves in California's San Joaquin Valley. Intensive measurements occurred over three 2-week intensive periods: at baseline and at the end of two consecutive 3-month study phases. Participants were randomly assigned to have their gas stoves replaced with electric induction at the start of Phase 1 or Phase 2. As part of the IAQ assessment, we collected particulate matter on Teflon filters using ultrasonic personal air samplers (UPAS). The filters were analyzed to quantify time-integrated PM 2.5 mass concentration, black carbon (BC) oxidative potential (OP). OP was measured using the SLF-OH assay, an acellular chemical assay that quantifies production of OH radicals in simulated lung fluid (SLF). Across all comparisons, PM 2.5 mass tended to be higher during gas cooking than induction electric cooking, although only one transition (Baseline to Phase 1) was statistically discernible at p<0.05. BC and mass-normalized OP showed no measurable differences across stove types or across phases. These preliminary findings suggest that stove fuel alone may not be the dominant determinant of indoor PM 2.5 concentrations in this sample, as previous studies have reported that indoor PM 2.5 during cooking can also be influenced by factors such as cooking practices, food and oil type, kitchen ventilation, and outdoor infiltration.

Lin, Zhuoying↗
DOE OSTI2024

Low-Power Characterization and Integration of Carbon Black Resistive Ink for Aerosol Jet-Printed RF Components

Aerosol jet printing (AJP) is gaining attention in additive manufacturing research, especially in the discipline of microwave engineering. Currently, no reliable AJP method exists to fabricate resistors that are both electrically small and with a resistance compatible with waveguide impedances for use in microwave components. In this work, the commercially available Metalon JR-038 is characterized and used to fabricate a resistor that is 100 μ m long by 250 μ m wide for the first time to the best of our knowledge. Furthermore, this resistor was then used to fabricate a Ka-band Wilkinson power divider using only the AJP process.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- UHSAS Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured fluxes of size resolved particles with an ultrahigh sensitivity aerosol spectrometer (UHSAS) at the ARM facility’s North Slope Alaska site. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location and received snow during the project.

Aerosol concentration↗
DOE OSTI2025

Arctic Black Carbon Aerosol Deposition Study North Slope of Alaska 2020- Sonic Anemometer Measurements

Particles are removed from the atmosphere through both wet and dry deposition. These processes are poorly understood, though they constitute important uncertainties in climate and air quality models. This project aims to use observational constraints on particle fluxes to improve model representations of dry deposition. Within this data set, we measured wind properties using a sonic anemometer. Measurements were made at the meteorological tower between 9 Sept and 25 Oct 2021. This site is a coastal tundra location, and received snow during the project.

Gill Windmaster 3D Ultrasonic Anemometer↗