Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biased wedge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Blade Designs For Improved Multi-Phase Performance In sCO 2 Compressors; Part II - Optical Diagnostics In sCO 2 And Experimental Evaluation With Particle Image Velocimetry

This paper presents the second part of a study in which the leading-edge and suction surface of a compressor blade was modified to delay onset of phase change for sCO 2 compressors operating near the critical point. Using a first-of-its-kind apparatus for the measurement of sCO 2 flow fields, Particle Image Velocimetry (PIV) is used for local flow field measurements of two compressor blade geometries: the modified “biased-wedge,” and a conventional constant thickness blade. Utilizing the developed hardware, the feasibility of a simple, laser-based diagnostic for qualitatively measuring liquid phase regions, is also presented. The design of the optical diagnostics rig, a discussion of numerous challenges, and necessary considerations involved in performing optical-based measurements like PIV, in sCO 2 , are discussed. Velocity field measurements for the modified compressor profile show a much lower suction peak compared to a conventional blade. Furthermore, these results validate numerical results at the tested conditions, where the suction side profile of the biased wedge works to minimize the local pressure gradient.

14 SOLAR ENERGY↗
DOE OSTI2024

Enabling Robust Compressor Operation Under Various sCO 2 Conditions at Compressor Inlet

The supercritical carbon dioxide (sCO 2 ) power cycle is one of the most investigated power conversion systems in last decade. The reason for this is its wide range of potential applications from fossil fuels (Natural gas), nuclear (Fusion, Fission), through concentrated solar power, energy storage system and waste heat recovery systems to power-to-x systems. The main advantage of the sCO 2 power cycle is very similar operation conditions, especially for the compressor, for all potential applications. Because of this the potential cost of the system can be reduced. However, the sCO 2 power cycle has still several issue that needs to address before commercial application. The current key issue is design of the primary compressor. The primary compressor is one of the key components in the sCO 2 power cycle; it operates with inlet conditions just above the critical point of CO 2 to maintain high fluid density and reduce power requirements.

14 SOLAR ENERGY↗
NASA NTRS2001

Adjustable Focus Optical Correction Lens (AFOCL)

This report describes the activities and accomplishments along with the status of the characterization of a PLZT-based Adjustable Focus Optical Correction Lens (AFOCL) test device. The activities described in this report were undertaken by members of the Center for Applied Optics (CAO) at the University of Alabama in Huntsville (UAH) under NASA Contract NAS8-00188. The effort was led by Dr. Bruce Peters as the Principal Investigator and supported by Dr. Patrick Reardon, Ms. Deborah Bailey, and graduate student Mr. Jeremy Wong. The activities outlined for the first year of the contract were to identify vendors and procure a test device along with performing the initial optical characterization of the test device. This activity has been successfully executed and test results are available and preliminary information was published at the SPIE Photonics West Conference in San Jose, January 2001. The paper, "Preliminary investigation of an active PLZT lens," was well received and generated response with several questions from the audience. A PLZT test device has been commercially procured from an outside vendor: The University of California in San Diego (UCSD) in partnership with New Interconnect Packaging Technologies (NIPT) Inc. The device has been subjected to several tests to characterize the optical performance of the device at wavelengths of interest. The goal was to evaluate the AFOCL similar to a conventional lens and measure any optical aberrations present due to the PLZT material as a deviation in the size of the diffraction limited spot (blur), the presence of diffracted energy into higher orders surrounding the focused spot (a variation in Strehl), and/or a variation or spread in the location of the focused energy away from the optical axis (a bias towards optical wedge, spherical, comma, or other higher order aberrations). While data has been collected indicative of the imaging quality of the AFOCL test device, it was not possible to fully characterize the optical performance of the AFOCL alone because there were significant optical distortions due to fabrication related issues.

Peters, Bruce R.↗
DOE OSTI2020

Enhanced positive and negative exchange bias in FeF 2 /Ni with dusted interfaces

An enhanced exchange bias was found in FeF 2 /Ni interfaces by inserting dusting of Pd and Cu atoms. We have used an ultrathin wedge to investigate systematically the effect of a discontinuous nonmagnetic spacer between the antiferromagnetic and ferromagnetic layers. Negative and positive exchange biases are symmetric and maximized for less than two angstroms of the nonmagnetic layer. Moreover, the dusting reduces the field cooling threshold to switch between the negative and the positive exchange bias. This finding demonstrates that nonmagnetic dusted layers can improve the interfacial exchange energy density in antiferromagnetic/ferromagnetic heterostructures and modify the bulk antiferromagnetic domain structure. Other dusting materials such as Ag, Ti, V, and SiO 2 showed no enhancement in FeF 2 /Ni bilayers, which indicates the atomic sensitivity of this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Locking hinge

The space station configuration currently studied utilizes structures which require struts to be hinged in the middle in the stowed mode and locked into place in the deployed mode. Since there are hundreds of hinges involved, it is necessary that they have simple, positive locking features with a minimum of joint looseness or slack. This invention comprises two similar housings hinged together with a spring loaded locking member which assists in making as well as breaking the lock. This invention comprises a bracket hinge and bracket members with a spring biased and movable locking member. The locking or latch member has ear parts received in locking openings where wedging surfaces on the ear parts cooperate with complimentary surfaces on the bracket members for bringing the bracket members into a tight end-to-end alignment when the bracket members are in an extended position. When the locking member is moved to an unlocking position, pivoting of the hinge about a pivot pin automatically places the locking member to retain the locking member in an unlocked position. In pivoting the hinge from an extended position to a folded position, longitudinal spring members are placed under tension over annular rollers so that the spring tension in a folded position assists in return of the hinge from a folded to an extended position. Novelty lies in the creation of a locking hinge which allows compact storage and easy assembly of structural members having a minimal number of parts.

Wesselski, Clarence J.↗
NASA NTRS1991

Robotic tool change mechanism

An assembly of three major components is disclosed which included a wrist interface plate which is secured to the wrist joint of a robotic arm, a tool interface plate which is secured to each tool intended for use by the robotic arm, and a tool holster for each tool attached to the interface plate. The wrist interface plate and a selected tool interface plate are mutually connectable together through an opening or recess in the upper face of the interface plate by means of a notched tongue protruding from the front face of the wrist interface plate which engages a pair of spring-biased rotatable notched wheels located within the body of the tool interface plate. The tool holster captures and locks onto the tool interface plate by means of a pair of actuation claws including a locking tab and an unlocking wedge which operate respective actuation bosses on each of the notched wheels in response to a forward and backward motion of the tool interface plate as a result of motion of the robotic arm to either park the tool or use the tool.

Voellmer, George M.↗
DOE OSTI2025

Field-level reconstruction from foreground-contaminated 21-cm maps

Current and upcoming 21-cm experiments will soon be able to map 21-cm spatial fluctuations in three dimensions for a wide range of redshifts. However, bright foreground contamination and the nature of radio interferometry create significant challenges, making it difficult to access rich cosmological information from the Fourier modes that lie within the “foreground wedge”. Here, in this work, we introduce two approaches aiming to reconstruct the full 21-cm density field, including the missing modes in the wedge: (a) a field-level inference under an effective field theory (EFT) framework; (b) a diffusion-based deep generative model trained on simulations. Under the EFT framework, we implement a fully differentiable forward model that maps the initial conditions of matter fluctuations to the observed, foreground-filtered 21-cm maps. This enables a gradient-based sampler to simultaneously sample the initial conditions and bias parameters, allowing a physically motivated mode reconstruction. Alternatively, we apply a variational diffusion model to perform 21-cm density reconstruction at the map level. Our model is trained on semi-numerical simulations over a wide range of astrophysical parameters. Our results from both approaches should provide improved cosmological constraints from the field level and also enable cross-correlation between experiments that have little or no overlapping modes.

cosmological perturbation theory↗
DOE OSTI2022

Graph identification of proteins in tomograms ( GRIP‐Tomo )

Abstract In this study, we present a method of pattern mining based on network theory that enables the identification of protein structures or complexes from synthetic volume densities, without the knowledge of predefined templates or human biases for refinement. We hypothesized that the topological connectivity of protein structures is invariant, and they are distinctive for the purpose of protein identification from distorted data presented in volume densities. Three‐dimensional densities of a protein or a complex from simulated tomographic volumes were transformed into mathematical graphs as observables. We systematically introduced data distortion or defects such as missing fullness of data, the tumbling effect, and the missing wedge effect into the simulated volumes, and varied the distance cutoffs in pixels to capture the varying connectivity between the density cluster centroids in the presence of defects. A similarity score between the graphs from the simulated volumes and the graphs transformed from the physical protein structures in point data was calculated by comparing their network theory order parameters including node degrees, betweenness centrality, and graph densities. By capturing the essential topological features defining the heterogeneous morphologies of a network, we were able to accurately identify proteins and homo‐multimeric complexes from 10 topologically distinctive samples without realistic noise added. Our approach empowers future developments of tomogram processing by providing pattern mining with interpretability, to enable the classification of single‐domain protein native topologies as well as distinct single‐domain proteins from multimeric complexes within noisy volumes.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

Aircraft rotor blade with passive tuned tab

A structure for reducing vibratory airloading in a rotor blade with a leading edge and a trailing edge includes a cut out portion at the trailing edge. A substantially wedge shaped cross section, inertially deflectable tab, also with a leading edge and a trailing edge is pivotally mounted in the cut out portion. The trailing edge of the tab may move above and below the rotor blade. A torsion strap applies force against the tab when the trailing edge of the tab is above and below the rotor blade. A restraining member is slidably movable along the torsion strap to vary torsional biasing force supplied by the torsion bar to the tab. A plurality of movable weights positioned between plates vary a center of gravity of the tab. Skin of the tab is formed from unidirectional graphite and fiberglass layers. Sliders coupled with a pinned degree of freedom at rod eliminate bending of tab under edgewise blade deflection.

Campbell, T. G.↗
DOE OSTI2022

Optical depth to reionization from perturbative 21 cm clustering

The optical depth τ is the least well determined parameter in the standard model of cosmology, and one whose precise value is important for both understanding reionization and for inferring fundamental physics from cosmological measurements. Here, we forecast how well future epoch of reionization experiments could constraint τ using a symmetries-based bias expansion that highlights the special role played by anisotropies in the power spectrum on large scales. Given a parametric model for the ionization evolution inspired by the physical behavior of more detailed reionization simulations, we find that future 21 cm experiments could place tight constraints on the timing and duration of reionization and hence constraints on τ that are competitive with proposed, space-based CMB missions provided they can measure k ≈ 0.1 h Mpc -1 with a clean foreground wedge across redshifts spanning the most active periods of reionization, corresponding to ionization fractions 0.2 ≲ x ≲ 0.8. Significantly improving upon existing CMB-based measurements with next-generation 21 cm surveys would require substantially longer observations (~ 5 years) than standard $\mathscr{O}$(1000 hour) integration times. Precise measurements of smaller scales will not improve constraints on τ until a better understanding of the astrophysics of reionization is achieved. In the presence of noise and foregrounds even future 21 cm experiments will struggle to constrain τ if the ionization evolution deviates significantly from simple parametric forms.

79 ASTRONOMY AND ASTROPHYSICS↗