Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atmospheric pressure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

TGA Study of the Reaction Kinetics of a CuFeMnAlO 4+δ Oxygen Carrier for Methane Chemical Looping Combustion under High Pressure and Atmospheric Pressure Conditions

Reduction and oxidation kinetics of a CuFeMnAlO 4+δ oxygen carrier for methane were studied using an atmospheric thermogravimetric analyzer (TGA) and a pressurized TGA. Important parameters such as temperature (500–900 °C), particle size distribution (150–650 μm), and partial pressures of reactants (methane and oxygen) were evaluated. Results showed that the reduction of the oxygen carrier was not affected by particle size distribution studied in this work, and that above 750 °C, the effect of the temperature on oxygen carrier reduction started to diminish. The reaction time approaches an asymptotic limit as methane partial pressure increases. For oxygen carrier oxidation, it was found that the rate of oxidation increased with increasing oxygen concentration. The effect of the oxygen concentration was more noticeable when the oxygen concentration was below 7.5%. Because of the inherent feature of the oxygen carrier, its chemical looping with oxygen uncoupling property was also assessed. A phase boundary-controlled shrinking sphere model was used to model the test data from the TGAs. Modeling results showed that the oxygen carrier reduction had a reaction order of 1 with an activation energy of ∼46 kJ/mol. Oxygen carrier oxidation demonstrated a reaction order of 1.1 with an activation energy of ∼55 kJ/mol. Additionally, the differences of the experimental results between the atmospheric pressure TGA and the pressurized TGA were discussed in detail and the limitations of the pressurized TGA were highlighted.

Hydrocarbons↗
DOE OSTI2023

Influence of strong Coulomb coupling on diffusion in atmospheric pressure plasmas

Ion diffusion in atmospheric pressure plasmas is examined and particular attention is paid to the fact that ion–ion interactions can be influenced by strong Coulomb coupling. Three regimes are identified. At low ionization fractions (x i ≲ 10 —6 ), standard weakly correlated ion-neutral interactions set the diffusion rate. At moderate ionization fractions (10 —6 ≲ x i ≲ 10 —2 ) there is a transition from ion-neutral to ion–ion collisions setting the diffusion rate. In this regime, the effect of strong Coulomb coupling in ion–ion collisions is accounted for by applying the mean force kinetic theory. Since both ion-neutral and ion–ion interactions contribute a comparable amount to the total diffusion rate, models (such as particle-in-cell or fluid) must account for both contributions. At high ionization fractions (x i ≳ 10 —2 ), strongly correlated ion–ion collisions dominate and the plasma is heated substantially by a disorder-induced heating (DIH) process associated with strong correlations. The temperature increase due to DIH strongly influences the ion diffusion rate. This effect becomes even more important, and occurs at lower ionization fractions, as the pressure increases above atmospheric pressure. In addition to ion diffusion, DIH affects the neutral gas temperature, therefore influencing the neutral diffusion rate. Model predictions are tested using molecular dynamics simulations, which included a Monte Carlo collision routine to simulate the effect of ion-neutral collisions at the lowest ionization fractions. The model and simulations show good agreement over a broad range of ionization fractions. Importantly, the results provide a model for ion diffusion, on a wide range of ionization fractions and pressures, solely considering the elastic contribution to the diffusion coefficient—as an illustration of how strong Coulomb coupling influences diffusion processes in general.

fast neutral gas heating↗
DOE OSTI2023

Understanding the Mechanisms of Self-Organization in Atmospheric Pressure DC Glows

One of the most challenging areas in atmospheric pressure plasmas is controlling uniformity and contact area. Indeed it is this problem which is closely related to scale up that has impeded the widespread applications of these plasmas. The atmospheric pressure plasma glow is a type of atmospheric pressure discharge akin to a traditional low pressure glow particularly when compared with discharge morphology. But this is where the similarities end. Unlike low pressure glows, atmospheric pressure glows do not rely on electrode processes such as secondary electron emission to make the discharge self-sustaining, rather the discharge is sustained by typically processes such as the presence of a resistive layer or through favorable atomic collisional processes such as that which prevail in helium that stabilizes the discharge so that the thermal instability is mitigated. These discharges can feature either solid metal electrodes or geometries where at least one electrode is a liquid water electrolyte. Regardless of the implementation, DC 1 Atm glows are fascinating in that the plasma attachment under certain conditions can self-organize. The attachment surface area therefore changes as a result. Therefore, self-organization could be the key to optimizing plasma contact area and thereby open the door to applications in the real world. The plasma physical processes prevailing at the surface where the self-organization takes place remain largely unexplored. There is very little published research on the conditions that prevail at the surface and virtually no scholarship on measured plasma parameters of the self-organized attachments themselves or the surface electric field. This effort breaks new ground by elucidating these largely unexplored physical processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Three-dimensional modelling of a self-sustained atmospheric pressure glow discharge

The atmospheric pressure glow discharge (APGD) is a relatively simple and versatile plasma source used in diverse applications. Stable APGD operation at high currents, generally a challenge due to instabilities leading to glow-to-arc transition, has been demonstrated using actively-controlled cathodic cooling. This article presents the computational modelling and simulation of a self-sustained direct-current APGD in helium within a 10 mm pin-to-plate inter-electrode gap for currents ranging from 4 to 40 mA. The APGD model is comprised of the conservation equations for total mass, chemical species, momentum, thermal energy of heavy-species and of free electrons, and electric charge. The model equations are discretized using a nonlinear variational multi-scale finite element method that has demonstrated superior accuracy in other plasma flow problems, on a temporal and three-dimensional computational domain suitable to unveil the potential occurrence of instabilities. Modelling results show good agreement with experimental measurements of voltage drop and the same trend but higher values of temperature. The higher temperatures obtained by the simulations appear to be due to the absence of a near-cathode heat dissipation model. Here, the results also reveal that the distribution of electron density and of the ratio of atomic helium ions to total ions transitions from monotonically increasing away from the cathode to presenting a minimum near the centre of the gap with increasing current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Effect of Cathode Cooling in Three-Dimensional Simulations of an Atmospheric Pressure Glow Discharge

The Atmospheric Pressure Glow Discharge (APGD) is a relatively simple and versatile plasma source used in a wide range of applications. Active cooling of the cathode can effectively mitigate instabilities, leading to glow-to-arc transitions. This study investigates the effect of varying the degree of cathode cooling in APGD with a planar cathode in helium. The plasma flow model incorporates mass conservation, chemical species transport, momentum conservation, conservation of thermal energy of heavy species and of electrons, and electrostatics. The model is applied to time-dependent simulations through a three-dimensional computational domain describing the whole discharge, without geometric symmetry or steady-state assumptions. Simulations of an experimentally characterized APGD explore the effects of electric current and cathode cooling—ranging from thermally insulated to extreme convective cooling. Results show the formation of an annular region with high electric field over the cathode surface under conditions of high current and low cooling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Sheath formation around a dielectric droplet in a He atmospheric pressure plasma

Interactions at the interface between atmospheric pressure plasmas and liquids are being investigated to address applications ranging from nanoparticle synthesis to decontamination and fertilizer production. Furthermore, many of these applications involve activation of droplets wherein the droplet is fully immersed in the plasma and synergistically interacts with the plasma. To better understand these interactions, two-dimensional modeling of radio frequency (RF) glow discharges at atmospheric pressure operated in He with an embedded lossy dielectric droplet (tens of microns in size) was performed. The properties of the sheath that forms around the droplet were investigated over the RF cycle. The electric field in the bulk plasma polarizes the dielectric droplet while the electron drift in the external electric field is shadowed by the droplet. The interaction between the bulk and sheath electric fields produces a maximum in E/N (electric field/gas number density) at the equator on one side of the droplet where the bulk and sheath fields are aligned in the same direction and a minimum along the opposite equator. Due to resistive heating, the electron temperature T e is maximum 45° above and below the equator of the droplet where power deposition per electron is the highest. Although the droplet is, on the average, negatively charged, the charge density on the droplet is positive on the poles and negative on the equator, as the electron motion is primarily due to diffusion at the poles but due to drift at the equator.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Disorder-induced heating in molecular atmospheric pressure plasmas

Abstract Recent work has shown that ions are strongly coupled in atmospheric pressure plasmas when the ionization fraction is sufficiently large, leading to a temperature increase from disorder-induced heating (DIH) that is not accounted for in standard modelling techniques. Here, we extend this study to molecular plasmas. A main finding is that the energy gained by ions in DIH gets spread over both translational and rotational degrees of freedom on a nanosecond timescale, causing the final ion and neutral gas temperatures to be lower in the molecular case than in the atomic case. A model is developed for the equilibrium temperature that agrees well with molecular dynamics simulations. The model and simulations are also applied to pressures up to ten atmospheres. We conclude that DIH is a significant and predictable phenomena in molecular atmospheric pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

OH density, flux and loss probability measurements in a room temperature atmospheric pressure surface discharge by microscopic laser induced fluorescence

Many applications involving atmospheric pressure plasma-substrate interactions are enabled by the large fluxes of short-lived reactive species such as OH radicals to the substrate, nonetheless, the accurate measurement of radical densities and fluxes at substrates at atmospheric pressure has received little attention to date, particularly for surface ionization waves. We report the measurement of the OH density distribution in a surface discharge on a fused silica (quartz) substrate generated by an impinging atmospheric pressure plasma jet in dry and humid helium. The OH density is measured by microscopic laser induced fluorescence with a spatial resolution of 10 µm in the direction perpendicular to the quartz substrate. The measured OH diffusive flux varied for the investigated experimental conditions by almost three orders of magnitude and had a maximum value of 1.7 × 10 15 cm -2 s -1 . The corresponding surface loss probability of OH on the quartz surface was determined to be ~0.01. The high spatial resolution was required to accurately resolve the near surface gradient of OH radicals.

plasma-surface interactions↗
DOE OSTI2023

The transport dynamics of tens of micrometer-sized water droplets in RF atmospheric pressure glow discharges

Abstract Charging of particles having diameters of tens of microns has been extensively studied at atmospheric pressure in the context of, for example, electrostatic precipitators where the focus was on unipolar charging. The ambipolar charging of particles in atmospheric pressure plasmas, and of droplets in particular, has received less attention. The plasma activation of droplets is of interest for water purification, fertilizer production and materials synthesis, all of which depend on the transport of the droplets through the plasma, which in turn depends on their charging. In this paper, we report on the transport dynamics of water droplets, tens of microns in diameter, carried by the gas flow through an atmospheric pressure radiofrequency glow discharge sustained in helium. The droplets pass through the plasma with minimal evaporation and without reaching the Rayleigh limit. The droplet trajectory in the presence and absence of the plasma provides insights on the forces acting on the droplet. The measurements were analyzed using results from a three-dimensional fluid model and a two-dimensional plasma hydrodynamics model. We found that the transport dynamics as the droplet enters and leaves the plasma are due to differential charging of the droplet in the plasma gradients of the bounding sheaths to the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Atmospheric pressure plasma functionalization of polystyrene

Atmospheric pressure plasma jets (APPJs) are used to improve the adhesive and hydrophilic properties of commodity hydrocarbon polymers such as polypropylene, polyethylene, and polystyrene (PS). These improvements largely result from adding oxygen functional groups to the surface. PS functionalization is of interest to produce high value biocompatible well-plates and dishes, which require precise control over surface properties. In this paper, we discuss results from a computational investigation of APPJ functionalization of PS surfaces using He/O 2 /H 2 O gas mixtures. A newly developed surface reaction mechanism for functionalization of PS upon exposure to these plasmas is discussed. A global plasma model operated in plug-flow mode was used to predict plasma-produced species fluxes onto the PS surface. A surface site balance model was used to predict oxygen-functionalization of the PS following exposure to the plasma and ambient air. We found that O-occupancy on the surface strongly correlates with the O-atom flux to the PS, with alcohol groups and cross-linked products making the largest contributors to total oxygen fraction. Free radical sites, such as alkoxy and peroxy, are quickly consumed in the post-plasma exposure to air through passivation and cross-linking. O-atom fluences approaching 10 17 cm -2 saturate the O-occupancy on the PS surface, creating functionality that is not particularly sensitive to moderate changes in operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reaction Pathways and Energy Consumption in NH 3 Decomposition for H 2 Production by Low Temperature, Atmospheric Pressure Plasma

Pathways for NH 3 decomposition to N 2 and N 2 H 4 by atmospheric pressure nonthermal plasma are analyzed using a combination of molecular beam mass spectrometry measurements and zero-dimensional kinetic modeling. Experimental measurements show that NH 3 conversion and selectivity towards N 2 formation scale monotonically with the specific energy input into the plasma with ~ 100% selectivity to N 2 formation achieved at specific energy inputs above 0.12 J cm −3 (3.1 eV (molecule NH 3 ) −1 ). The kinetic model recovers these trends, although it underpredicts N 2 selectivity at low specific energy input. These discrepancies can be explained by the underestimation of reaction rate coefficients for reactions that consume N 2 H x species in collisions with H radicals and/or radial nonuniformities in power deposition, gas temperature, and species concentrations that are not represented by the plug flow approximation used in the model. The kinetic model shows that N 2 formation proceeds through N 2 H x decomposition pathways rather than NH x decomposition pathways in low temperature, atmospheric pressure plasma. Higher selectivity toward N 2 production can be achieved by operating at higher NH 3 conversion and with a higher gas temperature. Furthermore, the high energy cost of NH 3 decomposition by atmospheric pressure nonthermal plasma found in this work (25–50 eV (molecule NH 3 converted) −1 ; 17–33 eV (molecule H 2 formed) −1 ) is a result of the energy requirement for electron-impact dissociation of NH 3 and the significant re-formation of NH 3 by three-body recombination reactions between NH 2 and H.

Nonthermal plasma↗
DOE OSTI2024

Disorder-induced heating as a mechanism for fast neutral gas heating in atmospheric pressure plasmas

Abstract Recent findings suggest that ions are strongly correlated in atmospheric pressure plasmas if the ionization fraction is sufficiently high ( ≳ 10 − 5 ). A consequence is that ionization causes disorder-induced heating (DIH), which triggers a significant rise in ion temperature on a picosecond timescale. This is followed by a rise in the neutral gas temperature on a longer timescale of up to nanoseconds due to ion–neutral temperature relaxation. The sequence of DIH and ion–neutral temperature relaxation suggests a new mechanism for ultrafast neutral gas heating. Previous work considered only the case of an instantaneous ionization pulse, whereas the ionization pulse extends over nanoseconds in many experiments. Here, molecular dynamics simulations are used to analyze the evolution of ion and neutral gas temperatures for a gradual ionization over several nanoseconds. The results are compared with published experimental results from a nanosecond pulsed discharge, showing good agreement with a measurement of fast neutral gas heating.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Data-driven prediction of the output composition of an atmospheric pressure plasma jet

Cold atmospheric plasma (CAP) in open air hosts numerous chemical species engaged in thousands of chemical reactions. Comprehensive diagnosis of its chemical composition is important across various fields from medicine, where reactive oxygen and nitrogen play key roles, to surface modification. In applications, a centimeter-scale helium–air jet operates for minutes, featuring micrometer-sized streamers and an atmospheric pressure-induced collision frequency in the hundreds of GHz range. To address this intricate multi-scale issue, we introduce a machine learning approach: using a physics-informed neural network (PINN) to tackle the multi-scale complexities inherent in predicting the complete list of species concentrations, gas temperature, and electron temperature of a CAP jet supplied with a mixture of helium and air. Experimental measurements of O 3 , N 2 O, and NO 2 concentrations downstream of the plasma jet, combined with fundamental physics laws, the conservation of mass and charge, constrain the PINN, enabling it to predict the concentrations of all species that are not available from the experiment, along with gas and electron temperatures. The results, therefore, obey all the physical laws we provided and can have a chemical balance with the measured concentrations. In conclusion, this methodology holds promise for describing and potentially regulating complex systems with limited experimental datasets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Strong Coulomb coupling influences ion and neutral temperatures in atmospheric pressure plasmas

Molecular dynamics simulations are used to model ion and neutral temperature evolution in partially-ionized atmospheric pressure plasma at different ionization fractions. Results show that ion–ion interactions are strongly coupled at ionization fractions as low as 10 –5 and that the temperature evolution is influenced by effects associated with the strong coupling. Specifically, disorder-induced heating is found to rapidly heat ions on a timescale of the ion plasma period (~10 s ps) after an ionization pulse. This is followed by the collisional relaxation of ions and neutrals, which cools ions and heats neutrals on a longer (~ns) timescale. Slight heating then occurs over a much longer (~100 s ns) timescale due to ion-neutral three-body recombination. An analytic model of the temperature evolution is developed that agrees with the simulation results. Finally, a conclusion is that strong coupling effects are important in atmospheric pressure plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

When should PIC simulations be applied to atmospheric pressure plasmas? Impact of correlation heating

Abstract Molecular dynamics simulations are used to test when the particle-in-cell (PIC) method applies to atmospheric pressure plasmas. It is found that PIC applies only when the plasma density and macroparticle weight are sufficiently small because of two effects associated with correlation heating. The first is the physical effect of disorder-induced heating (DIH). This occurs if the plasma density is large enough that a species (typically ions) is strongly correlated in the sense that the Coulomb coupling parameter exceeds one. In this situation, DIH causes ions to rapidly heat following ionization. PIC is not well suited to capture DIH because doing so requires using a macroparticle weight of one and a grid that well resolves the physical interparticle spacing. These criteria render PIC intractable for macroscale domains. The second effect is a numerical error due to artificial correlation heating (ACH). ACH is like DIH in that it is caused by the Coulomb repulsion between particles, but differs in that it is a numerical effect caused by a macroparticle weight larger than one. Like DIH, it is associated with strong correlations. However, here the macroparticle coupling strength is found to scale as Γ w 2 / 3 , where Γ is the physical coupling strength and w is the macroparticle weight. So even if the physical coupling strength of a species is small, as is expected for electrons in atmospheric pressure plasmas, a sufficiently large macroparticle weight can cause the macroparticles to be strongly coupled and therefore heat due to ACH. Furthermore, it is shown that simulations in reduced dimensions exacerbate these issues.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Nanosecond Repetitively Pulsed (NRP) Plasmas: Relationship Between Induced Flow and Plasma Characteristics at Atmospheric Pressure (Final Technical Report)

The local flow fields induced by plasma discharges at atmospheric pressure can play a critical role in aerodynamic flow and combustion control and have significant implications for plasma-based technologies in medicine and environmental engineering. However, the coupling between the plasma characteristics, the geometry and the induced flow field is not well understood. The primary goal of this work is to determine the relationship between the plasma characteristics and the induced flow field for nanosecond pulsed discharges at atmospheric pressure. A comprehensive experimental investigation of plasmas produced by nanosecond high-voltage pulses in a pin-to-pin electrode configuration was conducted, employing several measurement techniques including microwave and laser Rayleigh scattering, optical emission spectroscopy, and high-speed imaging. The flow field induced by the nanosecond plasma was measured and characterized using measurements of the velocity (particle image velocimetry) and density (background oriented schlieren) with unprecedented spatiotemporal resolution. The experimental measurements were complemented by development of a one-dimensional model of the plasma discharge and a high-fidelity computational fluid dynamics (CFD) simulation of the subsequent plasma-induced flow field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electrified vapour deposition at ultrahigh temperature and atmospheric pressure for nanomaterials synthesis

Vapour-phase synthesis methods have shown promise for the scalable synthesis of nanomaterials and coatings. However, the vaporization of different precursors for the synthesis of a broad nanomaterial space, particularly at atmospheric pressure, while maintaining compositional and structural control of the final product is challenging. Here we report the generation of an ultrahigh-temperature atomic vapour at atmospheric pressure based on electrified heating, for the growth of multi-elemental nanomaterials and thin films. This process relies on a reactor design whereby solid-state precursors are vaporized within a semi-confined space beneath an electrified heater that can reach ~3,000 K. The proximity of the heater rapidly breaks down the bonds of metal salt precursors and decomposes them into an atomic vapour that expands into a high-temperature (>2,000 K), highly reactive and high-flux vapour (10 21 –10 22 atoms per cm 2 per second) that travels upwards in a directional flow. When mixed with entrained ambient gases, the highly reactive atomic species rapidly nucleate and grow into the desired final products, including alloys, oxides, sulfides and thin films, which can be deposited on a low-temperature substrate. This EVD approach can synthesize a broad range of functional nanomaterials at atmospheric pressure, including single-phase multi-elemental nanomaterials formed under thermodynamically non-equilibrium conditions.

36 MATERIALS SCIENCE↗