Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “atmospheric boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

A Multiscale Simulation Study of the Effects of Nantucket Island on Atmospheric Boundary Layer Flow

Multiscale atmospheric simulations were conducted to investigate how Nantucket Island modifies the marine atmospheric boundary layer (ABL) flow, how the mechanisms responsible are represented in mesoscale versus large-eddy simulation (LES) domains, and potential impacts on wind energy production downstream, in moderate and high wind speed cases. Here, to isolate the effects of the island, each case study was simulated (i) with and without island topography included and (ii) with observed versus spatially uniform sea surface temperature (SST) values, the latter removing the influence of spatial variability in SST, while also enabling the examination of how the island effects vary with near-surface thermodynamic stability over the surrounding ocean. Island effects were found to be strongest during daytime heating, which generates convective rolls that redistribute momentum vertically over the island and downstream. Colder SSTs and weaker winds strengthen these rolls and extend their influence. Flow statistics within a representative wind turbine rotor-swept area downstream show that while vertical momentum redistribution enhances near-surface wind speeds, those aloft decrease, resulting in minimal net change to rotor-equivalent wind speed and slightly reduced vertical shear. Comparisons of mesoscale and LES domains reveal that both capture the roughness-driven near-surface slowdown, but mesoscale models underestimate vertical momentum transport compared to LES, which explicitly resolves convective rolls. Increasing LES resolution beyond the grid spacing required to begin capturing the largest convective roll structures ∼ O(100) m yields minimal additional momentum transport but increases resolved turbulence kinetic energy, relevant for stress loading.

Atmosphere-land interaction↗
DOE OSTI2024

Quantification and assessment of the atmospheric boundary layer height measured during the AWAKEN experiment by a scanning LiDAR

The atmospheric boundary layer (ABL) height plays a key role in many atmospheric processes as one of the dominant flow length scales. However, a systematic quantification of the ABL height over the entire range of scales (i.e., with periods ranging from one minute to one year) is still lacking in literature. In this work, the ABL height is quantified based on high-resolution measurements collected by a scanning pulsed Doppler LiDAR during the recent American WAKE experimeNt (AWAKEN) campaign. The high availability of ABL height estimates (≈2200 collected over one year and each of them based on 10-min averaged statistics) allows to robustly assess five different ABL height models, i.e., one for convective thermal conditions and four for stable conditions. Thermal condition is quantified by a stability parameter spanning three orders of magnitude and probed by near-ground 3D sonic anemometry. The free-atmosphere stability, quantified by the Brunt–Väisälä frequency, is both calculated from simultaneous radiosonde measurements and obtained from the best fit of two of the chosen ABL height models. Good agreement is found between the data and three of the chosen models, quantified by mean absolute errors on the ABL height between 281 and 585 m. Furthermore, the seasonal variability of the convective ABL height model parameters (−15% to +23% with respect to the year baseline) agrees with the variability of buoyancy-generated turbulence caused by the variation in solar radiation throughout the year.

17 WIND ENERGY↗
DOE OSTI2026

Observations of the Marine Atmospheric Boundary Layer’s Response to a Solar Eclipse

The atmospheric response to the solar eclipse of 8 April 2024 in North America is investigated with a specific focus on the marine atmospheric boundary layer (MABL). We leverage measurements collected during the Third Wind Forecast Improvement Project (WFIP3), including Doppler lidars, sonic anemometers, and thermodynamic profiler data to investigate the atmospheric response across sites that experienced partial eclipse conditions with nearly 90% obscuration. Using these measurements, we examine eclipse-induced changes in key meteorological parameters, such as temperature, wind speed, and turbulent fluxes. Most previous eclipse studies have been conducted over land, whereas this study provides new observations for both coastal and marine environments, offering additional insight into eclipse-driven variability in the MABL. The findings confirm a notable decrease in downwelling shortwave radiation during the eclipse, which results in rapid cooling of surface air. The temperature reduction ranges from $1.2^\circ \text {C}$ to $1.4^\circ \text {C}$ in coastal regions and from $0.3^\circ \text {C}$ to $0.5^\circ \text {C}$ over the ocean. This analysis suggests that the MABL’s higher thermal inertia compared to coastal regions moderates the temperature decrease during the eclipse. Wind speed exhibits a more complex behavior, as it is influenced by both the MABL and preexisting synoptic conditions. Although a reduction in wind speed is observable up to approximately 140 m above ground level (AGL) at more inland sites, at other locations closer to the coast, this reduction is constrained to the lowest 100 m AGL. Turbulence parameters retrieved from sonic anemometers, such as turbulence kinetic energy, turbulent heat flux, and friction velocity, decrease during the eclipse at coastal sites, accompanied by a brief transition of atmospheric stability from unstable to neutral or weakly stable conditions. For the open-ocean sites, the variability in turbulence statistics and atmospheric stability is minimal during the occurrence of the eclipse.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

Quantifying the Thermodynamic Impacts on the Atmospheric Boundary Layer due to the Sea Breeze in the Coastal Houston Region

The atmospheric boundary layer (ABL) is unique in coastal regions because of kinematic and thermodynamic influences from continental and marine environments. Sea-breeze (SB) circulations act to equilibrate the land–sea temperature gradient through advecting marine air onshore. The strength of the SB varies in terms of stability, temperature, and moisture advection and influences air quality and weather forecasts. The Tracking Aerosol Convection Interactions Experiment (TRACER) collected a wealth of data on coastal boundary layer evolution, including observations from uncrewed aerial systems (UASs). Vertical profiles of temperature, humidity, and winds were collected by the OU CopterSonde UAS from June to September in the coastal region of Houston. These profiles offer 5-m vertical resolution, on average, every 30 min through diurnal transitions, SB events, and nearby deep convection. During the campaign, CopterSonde observations were gathered through 17 SB events, six of which led to convection initiation. The UAS data can resolve the thermodynamic evolution and interactions between the SB and the preexisting convective boundary layer. Results show large variability across observed SBs and their impacts on temperature and moisture. The intensity of thermodynamic changes depends on the time of sea-breeze passage and influence from the Galveston Bay Breeze, a secondary marine circulation commonly observed in this region. In quantifying the spectrum of SB impacts, equivalent potential temperature θ e is used to contextualize its role in convection initiation and evolution. In conclusion, while all SBs tend to increase θ e from moisture advection, the rate and timing of the θ e rise can distinguish convective from nonconvective cases.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Resolution dependence of the turbulent atmospheric boundary layer in global storm-resolving climate simulations

The current generation of state-of-the-art global climate models are being run at increasingly higher horizontal resolutions, with the goal of resolving organised deep convection explicitly. How a kilometre-scale resolution impacts the representation of the atmospheric boundary layer is, however, not well known. Using statistical analysis on global fields as well as high-frequency data at selected locations, produced with the Integrated Forecasting System (IFS) model for the Next Generation Earth-system Models (nextGEMS) project, we investigate the horizontal resolution dependence of some boundary-layer processes. We find that a change in resolution from 9 to 2.8 km causes no substantial changes to boundary-layer properties and processes at most of the locations studied, although some global changes are detected that indicate circulation changes. Small changes to the boundary-layer depth and structure are found in the Tropics. The short simulation length and lack of data for optimal boundary-layer analysis limits the conclusions, especially in relation to the connection between the boundary layer and the atmosphere general circulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

The vertical-velocity skewness in the atmospheric boundary layer without buoyancy and Coriolis effects

One of the main features of near-neutral atmospheric boundary layer (ABL) turbulence is the positive vertical velocity skewness $Sk_w$ above the roughness sublayer or the buffer region in smooth-walls. The $Sk_w$ variations are receiving renewed interest in many climate-related parameterizations of the ABL given their significance to cloud formation and to testing sub-grid schemes for Large Eddy Simulations (LES). The vertical variations of $Sk_w$ are explored here using wind tunnel and flume experiments collected above smooth, rough, and permeable-walls in the absence of buoyancy and Coriolis effects. These laboratory experiments form a necessary starting point to probe the canonical structure of $Sk_w$ as they deal with a key limiting case (i.e., near-neutral conditions). Diagnostic models based on cumulant expansions, realizability constraints, and constant mass flux approach routinely employed in the convective boundary layer as well as prognostic models based on third-order budgets are used to explain variations in $Sk_w$ for the idealized laboratory conditions. The failure of flux-gradient relations to model $Sk_w$ from the gradients of the vertical velocity variance σ$_w^2$ are explained and corrections based on models of energy transport offered. Novel links between the diagnostic and prognostic models are also featured, especially for the inertial term in the third-order budget of the vertical velocity fluctuation. The co-spectral properties of w′/σ w vs w′ 2 /σ$_w^2$ are also presented for the first time to assess the dominant scales governing $Sk_w$ in the inner and outer layers, where w′ is the fluctuating vertical velocity and σ w is the vertical velocity standard deviation.>

Boundary layer flow↗
DOE OSTI2024

Modification of wind turbine wakes by large-scale, convective atmospheric boundary layer structures

In this study, we consider the impact of large-scale, convective structures in an unstable atmospheric boundary layer on wind turbine wakes. Simulation data from a high-fidelity large-eddy simulation (LES) of the AWAKEN wind farm site matching unstable atmospheric conditions were analyzed, and both turbine performance and wake behavior were affected based on their location relative to the convective structures. Turbines located in updraft regions of the flow experienced lower inflow velocity and generated less power, but their wakes were observed to recover faster and saw greater turbulent kinetic energy mixing higher in the boundary layer. The opposite effect was found for turbines in the downdraft regions of the convective structures. A simplified model of this wake behavior was also developed based on a two-dimensional k–ε Reynolds-Averaged Navier–Stokes formulation. This simplified model included the effects of vertical transport, but could be efficiently solved as a parabolic system, and was found to capture similar wake modifications observed in the high-fidelity LES computations.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Spatially distributed atmospheric boundary layer properties in Houston – A value-added observational dataset

Abstract In 2022, Houston, TX became a nexus for field campaigns aiming to further our understanding of the feedbacks between convective clouds, aerosols and atmospheric boundary layer (ABL) properties. Houston’s proximity to the Gulf of Mexico and Galveston Bay motivated the collection of spatially distributed observations to disentangle coastal and urban processes. This paper presents a value-added ABL dataset derived from observations collected by eight research teams over 46 days between 2 June - 18 September 2022. The dataset spans 14 sites distributed within a ~80-km radius around Houston. Measurements from three types of instruments are analyzed to objectively provide estimates of nine ABL parameters, both thermodynamic (potential temperature, and relative humidity profiles and thermodynamic ABL depth) and dynamic (horizontal wind speed and direction, mean vertical velocity, updraft and downdraft speed profiles, and dynamical ABL depth). Contextual information about cloud occurrence is also provided. The dataset is prepared on a uniform time-height grid of 1 h and 30 m resolution to facilitate its use as a benchmark for forthcoming numerical simulations and the fundamental study of atmospheric processes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Probing the atmospheric boundary layer with integrated remote-sensing platforms during the American WAKE ExperimeNt (AWAKEN) campaign

The American WAKE ExperimeNt (AWAKEN) collaboration is an observational-based field campaign in northern Oklahoma intended to analyze the potential influence of onshore wind farms and their collective wakes on wind power production, turbine structural loads, and on the atmospheric boundary layer (ABL). Focusing on the ABL effects, the University of Oklahoma and the Lawrence Livermore National Laboratory collected continuous high-resolution kinematic and thermodynamic profile measurements during 2022 and Summer 2023. The deployment strategy for these campaigns is detailed first, followed by an initial comparison of data from two sites in the AWAKEN domain: a near-farm site to examine collective wake impacts on the ABL, and a far-field site remaining outside the wind farm-waked region. Here, we summarize the datasets available and demonstrate the benefits of these observations and multiple value-added products (VAPs) for investigation of ABL features observed during AWAKEN. We also highlight examples of preliminary analyses, including ABL height detection and nocturnal low-level jet examination, which are produced using novel VAPs based on optimal estimation to retrieve deeper Doppler lidar wind profiles than previously resolved, along with their uncertainty. By including the near-farm and far-field site in these analyses, we identified a pattern of stronger lower-atmospheric mixing at the near-farm site than the far-field site, motivating deeper investigation into the relationship between wind farms and general ABL characteristics. Future analysis will delve deeper into this relationship by examining other ABL characteristics, such as atmospheric stability and convection.

17 WIND ENERGY↗
DOE OSTI2025

Spectral proper orthogonal decomposition of active wake mixing dynamics in a stable atmospheric boundary layer

Recent advancements in the use of active wake mixing (AWM) to reduce wake effects on downstream turbines open new avenues for increasing power generation in wind farms. However, a better understanding of the fluid dynamics underlying AWM is still needed to make wake mixing a reliable strategy for wind farm flow control. In this work, a spectral proper orthogonal decomposition (SPOD) is used to analyze the dynamics of coherent flow structures that are induced in the wake through blade pitch actuation. The data are generated using the ExaWind software suite to perform large eddy simulations of an NREL 2.8 MW turbine operating in a stable atmospheric boundary layer. SPOD tracks the modal behavior of flow structures from their generation in the turbine induction field through their growth in the near-wake region and to their subsequent evolution and energy transfers in the far wake. SPOD is shown to be a useful tool in the context of AWM because it translates the wavenumber and frequency inputs to the turbine controller to structures in the wake. A decomposition of the radial shear stress flux in the wake is also developed using SPOD to measure the contribution of coherent flow structures to mean flow turbulent entrainment and wake recovery. The effectiveness of AWM is connected to its ability to excite inherent structures in the wake of the turbine that arise using baseline controls. The effects of AWM on blade loading are also analyzed by connecting the axial force along the blade to the SPOD analysis of the turbine induction field. Lastly, the performance of different AWM strategies is demonstrated in a two-turbine array.

17 WIND ENERGY↗
DOE OSTI2026

Large Eddy Simulations of the Atmospheric Boundary Layer Over Satellite‐Sensed Sea Ice Maps

Surface heterogeneity in the marginal ice zone (MIZ) causes multiscale secondary atmospheric circulations that are challenging to model or observe. The absence or inadequate representation of these circulations in ocean‐atmosphere exchange schemes in climate models is partially responsible for the underestimation of Arctic sea ice loss. Observationally, such circulations obfuscate the interpretation of polar atmospheric chemistry measurements, among others. To address this open challenge, large‐eddy simulations are conducted over real‐world satellite‐sensed sea ice maps with an ice‐sea temperature contrast, as well as over idealizations of these maps that alter the ice pattern but conserve its fraction, showing that the ice fraction of a surface is not sufficient to predict the surface heat flux. In a second suite of simulations, three other heterogeneity metrics (representing the surface fragmentation, patch edge tortuosity, and patch size variability) are introduced to complement the ice fraction in describing the surface. Simulations varying these parameters suggest that they also significantly impact surface‐air interactions. A roughness contrast is then added to the surface temperature contrast, indicating that the contribution of roughness changes to the resulting atmospheric circulations is less pronounced than that of thermal heterogeneity. Based on these results, we illustrate, using a multi‐linear regression on these map features, that MIZ surface parameterizations in Earth Systems Models can be improved if they account for these various characteristics of the sea‐ice patterns.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Estimating scalar turbulent fluxes with slow-response sensors in the stable atmospheric boundary layer

Conventional and recently developed approaches for estimating turbulent scalar fluxes under stable atmospheric conditions are evaluated, with a focus on gases for which fast sensors are not readily available. First, the relaxed eddy accumulation (REA) classical approach and a recently proposed mixing length parameterization, labeled A22, are tested against eddy-covariance computations. Using high-frequency measurements collected from two contrasting sites (the frozen tundra near Utqiaġvik, Alaska, and a sparsely vegetated grassland in Wendell, Idaho, during winter), it is shown that the REA and A22 models outperform the conventional Monin–Obukhov similarity theory (MOST) utilized widely to infer fluxes from mean gradients. Second, scenarios where slow trace gas sensors are the only viable option in field measurements are investigated using digital filtering applied to fast-response sensors to simulate their slow-response counterparts. With a filtered scalar signal, the observed filtered eddy-covariance fluxes are referred to here as large-eddy-covariance (LEC) fluxes. A virtual eddy accumulation (VEA) approach, akin to the REA model but not requiring a mechanical apparatus to separate the gas flows, is also formulated and tested. A22 outperforms VEA and LEC in predicting the observed unfiltered (total) eddy-covariance (EC) fluxes; however, VEA can still capture the LEC fluxes well. This finding motivates the introduction of a sensor response time correction into the VEA formulation to offset the effect of sensor filtering on the underestimated net averaged fluxes. The only needed parameter for this correction is the mean velocity at the instrument height, a surrogate of the advective timescale. The VEA approach is very suitable and simple to use with gas sensors of intermediate speed (∼ 0.5 to 1 Hz) and with conventional open- or closed-path setups.

58 GEOSCIENCES↗
DOE OSTI2025

Using ground-based lidar data to investigate the water–vapor budget in the daytime atmospheric boundary layer

The moisture advection term in the water–vapor budget equation is investigated with a combination of a vertically-staring water–vapor lidar and Doppler lidar systems. These instruments make it possible to get the mean profile of moisture tendency and the latent heat flux (LHF) divergence. We use data of the Land–Atmosphere Feedback Experiment (LAFE) at the Atmospheric Radiation Measurement (ARM) Program’s Southern Great Plains (SGP) site, Oklahoma, USA, collected on 30 August 2017 between 15 and 24 UTC, which corresponds to 09 to 18 LT. The lidars provide turbulence resolving profiles of moisture and vertical wind fluctuations. The LHF profile is derived from the covariance of these moisture and vertical wind fluctuations. The mean boundary layer height z i is determined from the peak of the moisture variance. The results demonstrate that the combination of two remote sensing instruments can be applied for determining the dominant water–vapor budget terms, namely moisture tendency, latent heat flux divergence and moisture advection.

Advection↗
DOE OSTI2026

Active-wake mixing in atmospheric boundary layers with one-turbine arrays

This dataset includes results of high fidelity simulations of a single, offshore wind turbine under a variety of atmospheric conditions. Of primary interest is the turbine performance and wake characteristics when different turbine control strategies are applied, including when wake steering or active wake control are used. The simulations were performed with the LES code AMR-Wind (https://github.com/Exawind/amr-wind/), coupled with OpenFAST (https://github.com/OpenFAST/openfast) and the ROSCO open-source turbine controller (https://github.com/NREL/ROSCO). The turbine used in the simulations is the IEA 15MW reference turbine model.

17 WIND ENERGY↗
DOE OSTI2025

Ensemble‐Based, Large‐Eddy Reconstruction of Wind Turbine Inflow in a Near‐Stationary Atmospheric Boundary Layer Through Generative Artificial Intelligence

ABSTRACT To validate the second‐by‐second dynamics of turbines in field experiments, it is necessary to accurately reconstruct the winds going into the turbine. Current time‐resolved inflow reconstruction techniques estimate wind behavior in unobserved regions using relatively simple spectral‐based models of the atmosphere. Here, we develop a technique for time‐resolved inflow reconstruction that is rooted in a large‐eddy simulation model of the atmosphere. Our “large‐eddy reconstruction” technique blends observations and atmospheric model information through a diffusion model machine learning algorithm, allowing us to generate probabilistic ensembles of reconstructions for a single 10‐min observational period. Our generated inflows can be used directly by aeroelastic codes or as inflow boundary conditions in a large‐eddy simulation. We verify the second‐by‐second reconstruction capability of our technique in three synthetic field campaigns, finding positive Pearson correlation coefficient values () between ground‐truth and reconstructed streamwise velocity, as well as smaller positive correlation coefficient values for unobserved fields (spanwise velocity, vertical velocity, and temperature). We validate our technique in three real‐world case studies by driving large‐eddy simulations with reconstructed inflows and comparing to independent inflow measurements. The reconstructions are visually similar to measurements, follow desired power spectra properties, and track second‐by‐second behavior ().

17 WIND ENERGY↗