SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The light-absorbing chemical components of atmospheric organic aerosols are commonly referred to as Brown Carbon (BrC), reflecting the characteristic yellowish to brown appearance of aerosol.
Secondary organic aerosols (SOA) have complex, multicomponent composition that controls particle viscosity and gas-particle partitioning, key factors to their atmospheric evolution. This study investigates the chemical composition, volatility and viscosity of SOA formed by ozonolysis of cyclic α-pinene (PSOA) and acyclic ocimene (OSOA) monoterpenes. Using Temperature-Programmed Desorption combined with Direct Analysis in Real-Time ionization and High-Resolution Mass Spectrometry, we determined the molecular composition and saturation mass concentration of individual SOA constituents. These data enabled gas-particle partitioning and viscosity estimates under varied atmospheric conditions. PSOA, composed of higher molecular weight and less oxidized species, shows higher condensability and viscosity under high total organic mass (tOM) loadings. Here, in contrast, OSOA, consisting of more oxidized, lower molecular weight species, exhibits greater sensitivity to tOM, with viscosity increasing significantly upon dilution. Poke-flow experiments support this trend, indicating that OSOA undergoes more dynamic compositional and phase changes during atmospheric aging. These observations reveal distinct dynamic trends in the atmospheric transformations and reactivity of SOA from cyclic and acyclic monoterpenes, with the latter showing greater compositional changes during aging that alter viscosity and diffusion. This highlights the importance of incorporating such dynamic transformations into atmospheric models to improve predictions of SOA atmospheric loadings, lifetimes, and impacts.
Atmospheric aerosols play critical roles in the Earth’s energy budget, directly by scattering or absorbing solar and terrestrial radiation and indirectly by serving as seeds (nuclei) for cloud droplet and ice crystal formation and by depositing on snow and ice surface, thereby changing the surface albedo. These effects are dependent on aerosol particle size and chemical composition and impact the hydrological cycle as well. This project provided single-particle size and chemical composition measurements across the entire annual cycle in the high Arctic and in the Alaskan Arctic during fall – winter, addressing the most significant gaps in Arctic aerosol observational data. These needs were based on recent rapid sea ice loss across the entire Arctic, as well as the major annual delays in sea ice freeze-up during fall in the Chukchi Sea and increased wintertime sea ice fracturing in the Beaufort Sea, both off the North Slope of Alaska. Two DOE Atmospheric Radiation Measurement (ARM) field campaigns were conducted for atmospheric aerosol sampling. The Aerosols during the Polar Utqiagvik Night (APUN – ‘snow on ground’ in Iñupiaq) ARM field campaign at Utqagivik, Alaska was conducted from Oct. 28 – Dec. 22, 2018. Aerosol sizing instrumentation and a single-particle mass spectrometer were successfully deployed for size-resolved number concentration measurements and measurements of individual particle size and chemical composition, respectively. These results show the influence of locally-produced sea spray aerosol, with high cloud-forming potential, due to delayed sea ice freeze-up in the fall. During the 2019‐2020 international Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition, daily atmospheric aerosol particles were collected aboard the German icebreaker Polarstern in the Central Arctic from Nov. 2019 – Oct. 2020. Sea salt aerosol and marine organics were observed year-round during MOSAiC with varying morphologies and sources. These findings are important because most Arctic models do not include a sea spray aerosol source, despite this source increasing with declining sea ice extent. In addition to collecting new samples and data, this project also conducted further analysis of previously collected single-particle chemical composition measurements within the North Slope of Alaska oil fields and at Utqiaġvik, AK, during Aug. – Sep. 2015 and 2016 field campaigns. This work resulted in the discovery of chemical reactions of oil field combustion emissions occurring within fog droplets across the North Slope of Alaska and forming secondary aerosol, showing the impact of Arctic oil field emissions beyond black carbon aerosol and greenhouse gases. In addition, the distribution of chemical species across the aerosol population within the oil fields was quantified, using these data and a previously development framework. We also presented the first ambient evidence of the collision of two atmospheric particles resulting in formation of an organic-coated ammonium sulfate particle of marine origin, which has implications for cloud formation with declining sea ice extent. Overall, this project has elucidated connections between seawater biogeochemistry, resource extraction activities, atmospheric composition, clouds, and the energy budget of the Arctic region. The results of this project are expected to improve weather and sea ice forecasting for security and development in the Arctic and beyond.
The Arctic is rapidly warming, and aerosols play an increasingly important role by scattering and absorbing sunlight and by participating in cloud formation. Their optical and cloud-forming properties depend on the mixing state and chemical composition, but observations of these features remain limited. This study comprehensively characterizes 25,254 individual particles collected at Ny-Ålesund, Svalbard (November −December 2020), using microspectroscopy techniques to investigate their size, morphology, mixing state, and chemical composition. Fresh sea salt aerosols (SSA) were identified as the most abundant (∼85%), of the total observed aerosol population, with potential sources from sea spray and blowing snow. Air masses originating from the Arctic Ocean surrounding Svalbard likely contribute to increased concentrations of sub-micrometer “Fresh SSA” particles. “Aged SSA” particles (7.4%) are enriched in sulfur and nitrogen, compared to “Fresh SSA”. These elevated ratios may result from various atmospheric aging processes including the uptake of sulfuric and nitric acids. Here, our results suggest that aged SSA, with sizes larger than 300 nm, likely underwent chlorine depletion by sulfuric and nitric acids during transport. Additionally, elemental analysis reveals that both fresh and aged SSA can mix with dust particles, regardless of the SSA size (49.9% in sub-micrometer size and 50.1% in super-micrometer size, respectively). Dust particles are efficient ice-nucleating particles (INPs), and SSA is known to act as cloud condensation nuclei (CCN), and therefore, their mixtures may inherit both properties. The non-negligible number (4.4%) of SSA-dust mixtures underscores the importance of these particles as potential sources of CCN and INP in the Arctic atmosphere.
The effects of biomass burning aerosols (BBA) on radiative forcing and cloud formation depend on chemical composition and the internal structures of individual particles within smoke plumes. To improve our understanding of the chemical and physical properties of BBA emitted at different times of the day and their evolution during atmospheric aging, we conducted a study as a part of the Fire Influence on Regional to Global Environments and Air Quality field campaign. Particle samples were collected onboard a research aircraft from smoke plumes from a wildfire in eastern Oregon during late afternoon and nighttime flights on August 28, 2019. A time-resolved aerosol collector was used to collect samples on substrates for offline spectromicroscopic imaging to investigate the single-particle characteristics of BBA particles. Approximately 20,400 individual particles from 10 selected samples were analyzed using computer-controlled scanning electron microscopy coupled with energy-dispersive X-ray microanalysis, revealing their elemental composition, morphology, and viscosity. Elemental microanalysis indicated that aged potassium is likely found in the form of K 2 SO 4 , KNO 3 , and possible K-organic salts. Further chemical speciation and carbon bonding mapping within individual particles were conducted using synchrotron-based scanning transmission X-ray microscopy (STXM) coupled with near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Real-time, water-soluble light absorption measurements were acquired using a particle-into-liquid sampler instrument coupled to a liquid waveguide capillary cell and total organic analyzer. In the late afternoon samples, 65% of the total particle number population consisted entirely of organic components, compared to 46% in the nighttime particles. These differences were attributed to discrepancies in composition at the time of emission and to the daytime condensation and accumulation of photochemically formed secondary organic material on existing BBA particles, a process that halts at night. Microscopy images indicated that particle viscosity was lower in the nighttime particles (<10 1 Pa·s), likely due to increased relative humidity and a higher contribution from hygroscopic inorganic components. The chemical heterogeneity of individual particles was quantified using STXM-derived mixing state parameters. The nature of carbon bonding within individual particles was inferred from the extent of carbon sp 2 hybridization derived from NEXAFS spectra. Average percentages of sp 2 hybridization range between 40% and 60%, with no noticeable differences between late afternoon and nighttime flights. These findings were compared with the online optical properties of both late afternoon and nighttime smoke plumes, providing valuable insights into the complex relationship between chemical composition and optical properties of BBA particles at different times of the day.
Biomass burning aerosol (BBA) from agricultural fires in southern Africa contributes about one-third of the global carbonaceous aerosol load. These particles have strong radiative effects in the southeast Atlantic (SEA), which depend in part on the radiative contrast between the aerosol layer in the free troposphere (FT) and the underlying cloud layer. However, there is large disagreement in model estimates of aerosol-driven climate forcing due to uncertainties in the vertical distribution, optical properties, and life cycle of these particles. This study applies a novel method combining remote sensing observations with regional model outputs to investigate the aging of the BBA and its impact on the optical properties during transatlantic transport from emission sources in Africa to the SEA. Results show distinct variations in extinction Ångström exponent (EAE) and single-scattering albedo (SSA) as aerosols age. Near the source, fresh aerosols are characterized by low mean SSA (0.84) and high EAE (1.85), indicating smaller, highly absorbing particles. By isolating marine contributions from the total column during BBA transport across the SEA, our analysis reveals an initial decrease in BBA absorptivity, with mean FT SSA of 0.87 after 6–7 d, followed by increased absorptivity with mean FT SSA of 0.84 after 10 d, suggesting enhanced absorption due to chemical aging. These findings indicate that BBA becomes more absorbing during extended transport across the SEA, with implications for reducing model uncertainties. Our remote-sensing-based results agree well with previous in situ studies and offer new insights into aerosol–radiation interactions and the energy balance over the SEA.
Not Available
Biomass burning is one of the most significant sources of organic aerosol in the atmosphere. Biomass burning organic aerosol (BBOA) has been observed to undergo liquid– liquid phase separation (LLPS) to give core–shell morphology with the hydrophobic phase encapsulating the hydrophilic phase, potentially impacting the evolution of light-absorbing components, i.e., brown carbon (BrC), through multiphase processes. Here, we demonstrate how multiphase processing differs between the watersoluble (i.e., hydrophilic) and insoluble (i.e., hydrophobic) phases of BBOA in terms of reactive uptake of ozone in a coated-wall flow tube. Effects of relative humidity (RH) and ultraviolet (UV) irradiation were investigated. Experimental timeseries were used to inform simulations using multilayer kinetic modeling. Among non-irradiated thin films, the uptake coefficient was greatest for the water-soluble phase at 75% RH (3 × 10 –5 , corresponding to a diffusion coefficient of BrC, D BrC , of 3 × 10 –9 cm 2 s –1 ) and least for the same phase at 0% RH (1 × 10 –5 , corresponding to D BrC of 1 × 10 –10 cm 2 s –1 ). The uptake coefficient for the water-insoluble phase fell between these two (about 1.5 × 10 –5 ), regardless of RH, and the corresponding D BrC increased only slightly (8 × 10 –10 cm 2 s –1 at 0% RH to 9 × 10 –10 cm 2 s –1 at 75% RH). The uptake coefficients of both phases at 0% RH decreased significantly after UV irradiation, consistent with a transition from viscous liquid to solid and supported by qualitative microscopy observations. Modeling multiphase ozone oxidation of primary BrC components in the atmosphere demonstrated, first, that LLPS may extend the lifetime of water-soluble BBOA encapsulated by water-insoluble species by a factor of 1.5 at moderate to high RH and, also, that UV irradiation may extend the lifetime of both phases by more than a factor of 2.5.
Not Available
Organic aerosol (OA) particles constitute a substantial fraction of sub-micron particulate mass in the atmosphere and play a critical role in climate system. OA undergoes dynamic aging processes in the atmosphere, with photolytic aging induced by ultraviolet solar irradiance being an important yet poorly characterized mechanism. Knowledge gaps persist regarding the role of volatility transformations during photolytic aging on the OA mass decay kinetics and the evolution of climate-relevant properties, such as hygroscopicity, hindering the model evaluation of OA spatiotemporal distributions and atmospheric budgets. In this study, we conduct isothermal photolytic aging experiments on both laboratory-generated secondary organic aerosols and ambient-collected particles from urban Atlanta, utilizing a high-sensitivity Quartz Crystal Microbalance. Our results reveal that photolytic aging reduces 40–66% of the low-volatility OA mass with lifetimes ranging from 8 to 200 hours under solar irradiance, and 44–92% of the photolytic mass loss is through slow evaporation of semi- or intermediate-volatile products, kinetically limited by their volatility. We observe up to ±50% changes in OA hygroscopicity with the transformation of fresh OA to photo-recalcitrant low-volatility products, associated with changes in oxygen-to-carbon ratio and molecular weight. A kinetic model incorporating photolytic volatility transformation provides a cohesive explanation for the observed photolysis-induced changes in mass, volatility, and hygroscopicity. Our results can help constrain model representation of the dynamic evolutions of mass and climate-relevant properties during photolytic aging processes of the ambient OA, improving our understanding of OA atmospheric behavior and climate impact.
To improve upon our conventional thermally accelerated aging study methods which require periodic interruption of aging to perform load testing in an Instron machine, a new aging system is being developed to: (1) automate/facilitate data acquisition/analysis, (2) improve data quality, and (3) enable uninterrupted aging conditions (compression, temperature, atmosphere) which represents the service condition. In FY24, a thermal aging vessel instrumented with load cells was fabricated and tested. That unit demonstrated the primary function of the vessel: to continuously monitor the in situ load retention of up to three compressed polymer coupons undergoing thermally accelerated aging under nitrogen. A secondary objective, not realized in the unit due to inadequate sealing, was to enable a single initial nitrogen backfill (as opposed to a continuous purge) and gas sampling of the vessel headspace during thermal aging. Heating of the vessel was achieved using a custom heater jacket.
In this work, we present high-resolution (R ~ 100,000), high signal-to-noise ratio (S/N ~ 800) spectroscopic observations for the well-known, bright, extremely metal-poor, carbon-enhanced star BD+44°493. We determined chemical abundances and upper limits for 17 elements from WIYN/NEID data, complemented with 11 abundances redetermined from Subaru and Hubble data, using the new, more accurate, stellar atmospheric parameters calculated in this work. Our analysis suggests that BD+44°493 is a low-mass (0.83 M ⊙ ), old (12.1–13.2 Gyr) second-generation star likely formed from a gas cloud enriched by a single metal-free 20.5 M ⊙ Population III star in the early Universe. With a disk-like orbit, BD+44°493 does not appear to be associated with any major merger event in the early history of the Milky Way. From the precision radial-velocity NEID measurements (median absolute deviation = 16 m s –1 ), we were able to constrain companion planetary masses around BD+44°493 and rule out the presence of planets as small as $m\sin i=2$ M J out to periods of 100 days. This study opens a new avenue of exploration for the intersection between stellar archaeology and exoplanet science using NEID.
Ambient soot particles significantly impact Earth’s radiative balance, human health, and atmospheric visibility. Their microstructural properties depend on formation and aging mechanisms, which vary by emission source and atmospheric processes. Hence, accurately identifying sources of soot enhances our understanding of their physicochemical properties and atmospheric implications. This study used a multi-modal approach to characterize and attribute sources of submicron soot particles collected in Israel during new particle formation events, biomass burning episodes, and background atmospheric conditions. Synchrotron-based X-ray microscopy was used to map soot (elemental carbon), organic carbon, and inorganic species. Implemented atomic force microscopy showed highly diverse phase states, with soot consistently exhibiting a solid-like phase. Automated µ-Raman analysis was subsequently performed on ~690 particles, identifying three soot classes based on spectral features corresponding to the "Defect" (D) and "Graphite" (G) bands of soot. We applied two-peak and five-peak fitting approaches to deconvolute the “Defect” peaks (D1, D2, D3, and D4) and G band from average Raman, revealing varying degrees of graphitic order. The degree of graphitic order was determined from metrics such as the D3 peak area, often observed when soot was internally mixed with organic material. Raman spectral features, along with temporal variations in particle classes contributions, suggest that Particle Type 1 corresponds to traffic related soot and Particle Type 2 to less graphitic soot from biomass burning, while Particle Type 3 is associated with more heterogeneous particulate representative of soot-OC mixtures emitted during new particle formation and biomass burning episodes.
Venus' thick atmosphere rotates in the same direction as the solid body, but ∼60 times faster. This atmospheric superrotation has produced dozens of windblown ejecta deposits (“parabolas”) on the surface of Venus. The formation and modification of parabolas is an interplay between impacts, aeolian modification, and atmospheric dynamics. We conducted a survey to explore the nature of these sedimentary surface features. First, we observe trends in parabolas' morphology that shed light on how they are deposited and gradated. Changes in the size and radar albedo of parabolas are likely linked to the height and density (respectively) of ejecta plumes at time of formation. Next, we discovered that parabolas show orientations inconsistent with present atmospheric dynamics. This discrepancy may record a change in these dynamics or geologically recent true polar wander at a rate of ∼1° Myr −1 , which is similar to that observed on Earth over the past century. These results highlight how overlapping observations at different radar wavelengths provide important insights into the history and character of geologic processes on Venus. Overall, atmospheric superrotation has probably persisted for at least the age of Venus' surface.
Absorbing aerosols (AA) have an important impact on the global radiation budget. The composition and properties of AA can vary substantially throughout the atmosphere, depending on the particle source and the influence of chemical aging. Uncertainties associated with the radiative effects of AA remain substantial. A key contributor to this uncertainty is understanding the extent to which water uptake alters absorption by AA particles and how this depends on particle composition. We have used new and existing experimental tools to systematically characterize the relationship(s) between AA chemical and physical characteristics, relative humidity, and mixing of AA with other aerosol components through a combination of laboratory and field measurements. We have developed fundamental understanding through laboratory experiments that will enable interpretation of field observations at DOE ARM sites and facilitate process-based improvements in the simulation of absorption by carbonaceous aerosols in climate models. In the laboratory experiments we have considered a variety of different AA types, including fullerene soot (a surrogate for refractory black carbon, or BC) and nigrosine (a surrogate for partially soluble brown carbon, or BrC). By examining a range of AA types we will develop insight into how the chemical and physical properties of AA particles (e.g. whether they are refractory or soluble) impact the influence of water uptake on absorption. These AA particles will also be mixed—both internally and externally—with compounds having a wide range of hygroscopic properties to establish how the impact of water uptake on absorption will vary with photochemical processing. These laboratory observations have been compared with commonly used theoretical models, enabling development of empirical models that will facilitate improved representation of absorption by AA particles in regional and global climate models. Overall, our study has contributed to the mission of the Atmospheric System Research program by quantifying how interactions between aerosols and radiation depend on relative humidity. Through this, our work will improve understanding and model representation of aerosol processes as they affect the Earth’s radiation budget.
Absorbing aerosols (AA) have an important impact on the global radiation budget and cloud properties. The composition and properties of AA can vary substantially throughout the atmosphere, depending on the particle source and the influence of chemical aging. Uncertainties associated with the radiative effects of AA remain substantial. A key contributor to this uncertainty is understanding the extent to which coatings in general, and water uptake especially, alters absorption by AA particles and how this depends on particle composition. We deployed new and existing experimental tools during the Tracking Aerosol Convection Interactions Experiment (TRACER) campaign in Houston, TX as part of the Carbonaceous Aerosols Thrust (CAT) to provide detailed characterization of aerosol optical, chemical, and physical properties. Our TRACER-CAT measurements complemented and expanded on the planned TRACER instrumentation, allowing for more detailed characterization of aerosol properties of relevance to cloud development (a core focus of TRACER), such as the composition of particles that can act as cloud condensation nuclei, than would otherwise be available. Our measurements have allowed for assessment of the relationship(s) between AA optical properties (with a focus on absorption) and the chemical and physical characteristics (including the mixing state of black carbon (BC) containing particles). These field observations occurred in collaboration with Los Alamos National Laboratory in summer 2022 during the TRACER intensive operating period. The instrumentation we co-deployed provided for measurement of (i) multi-wavelength dry aerosol absorption, scattering, and extinction, (ii) the size-dependent composition and abundance of sub-micron aerosol, differentiating between those particles that do and do not contain BC, (iii) BC-specific concentrations and size distributions, (iv) particle size, and (v) the first field measurements at an ARM site of the influence of RH on multi-wavelength absorption by ambient AA. We have leveraged the natural variability of the atmosphere and of aerosol sources in the Houston region to (i) specifically disentangle contributions to light absorption from BC, absorbing organic carbon (brown carbon), and coatings on BC, (ii) characterize the mixing state of BC and assess the factors that give rise to compositional differences between BC-containing and BC-free aerosol, and (iii) establish how water uptake influences absorption and how any such effect depends on particle composition and BC mixing state. Overall, our study contributed to the mission of the Atmospheric System Research program in multiple ways. Through the deployment of complementary, advanced instrumentation for characterization of a wide range of aerosol properties our work helped to maximize the scientific impact of the TRACER campaign. Our work also allowed for development of new insights into the relationship(s) between aerosol composition, hygroscopicity, and the mixing state of BC with aerosol optical properties. Through this, our work has provided knowledge that can improve understanding and model representation of aerosol processes as they affect the Earth’s radiation budget.
Here, using observations from the Martha’s Vineyard Coastal Observatory, this paper investigates how momentum flux in the marine atmospheric surface layer over the coastal ocean varies with fetch, wave age, and wave slope and assesses the performance of the COARE 3.5 bulk parameterization. Long-fetch (at least 300 km) and short-fetch (3–6 km away from land) conditions have very similar momentum flux, with the latter being just 15% higher. The COARE 3.5 wind speed–dependent formulation closely matches the observations. The sea state dependence of wave age and wave slope is analyzed by considering both peak frequency and mean frequency in a wave spectrum. The slope of regression lines between normalized roughness and wave age is sensitive to wind speed ranges and the scatter of momentum flux, potentially explaining why earlier studies did not find a universal formula to characterize the wave dependence. Although the observed momentum flux exhibits an obvious dependence on wave age, a robust quadratic fit between momentum flux and the 10-m neutral wind speed exists only for young waves. For the short-fetch conditions, the momentum flux does not increase as wave slope increases. This may be because waves generated by local wind are still weak and swell that propagates from other areas dominates the wave spectra. In other words, the wave slope computed by considering the spectra does not properly reflect the local wind–wave interaction.
Electrified transportation is calling for insulation design criteria that is adequate to provide elevated levels of power density, power dynamics and reliability. Increasing voltage levels are expected to cause accelerated intrinsic and extrinsic aging effects which will not be easily predictable at the design stage due to a lack of suitable modeling. Designing reliable insulation systems would require finding solutions able to control accelerated aging due to an unpredictable increase of intrinsic stresses and the onset of extrinsic stresses as partial discharges. This paper proposes the concept of reliability redundancy for the insulation design of aerospace electrical asset components, which is also validated at lower-than-standard atmospheric pressure. The principle is that extrinsic-aging-free design might be achieved upon determining the aging stress or abnormal service stresses distribution and being sure that aging will not generate conditions that can incept extrinsic aging (partial discharges) during operation life. However, such information is never, in practice, fully available to insulation system designers. Hence, especially in critical applications such as electrified aircraft, aerospace, and combat ships a further level of reliability should be added to a partial-discharge-free design, which can consist of the use of corona-resistant materials and/or of life models able to consider the accelerated aging effect of partial discharges (or any other type of extrinsic-accelerated aging factor). Innovative life modeling considering both extrinsic and intrinsic aging stresses, insulating material testing to estimate model parameters, and a metric for quantifying the extent of corona (or partial discharge) resistance can lead to establishing feasibility and limit conditions for optimized or fully reliability-redundant design. It is shown in the paper that if an extrinsic-aging-free design is not feasible, and it is therefore replaced by a redundant design, a further level of reliability redundancy can be provided by effective condition monitoring plans.