Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analysis approach”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

TCO Analysis Approach and Regional Analysis of dWPT for Class 8 Tractors

Dynamic Wireless Power Transfer (dWPT) is a method by which battery electric vehicles (BEVs) can charge their battery while traveling on the road without the need for a physical conductive connection to the power source. dWPT has been proposed as a strategy to enable a reduction in vehicle battery capacity and associated mass and cost. In this slide deck presented at the EVs@Scale Consortium - Wireless Power Transfer Pillar Deep-Dive Meeting on November 11th, 2023, NREL provides results from an evaluation of dWPT using data from Class 8 tractors driving in the Atlanta Metro Area. NREL selected data for archetypal days representing local, regional, and long-haul trips, defined according to trip length, that included travel on primary roadways. EVI-InMotion (Electric Vehicle Infrastructure - InMotion), a systems planning and optimization tool developed at NREL, was used to evaluate dWPT performance assuming dWPT charging on 120 road segments for a total roadway lane distance of 2,365 miles. The EVI-InMotion results and representative day drive cycles were analyzed with NREL's T3CO (Transportation Technology Total Cost of Ownership) tool to estimate the total cost of ownership (TCO) for scenarios comprising two model years - 2030 and 2040 - and two technology progress cases. TCO was calculated for diesel, fuel cell electric, BEVs with batteries sized assuming no dWPT capabilities, and 200kWh BEVs with dWPT installed. This analysis finds that en-route stationary charging frequency and downtime when not on electrified roadways are the main contributors to TCO for the dWPT vehicles and that these vehicles can achieve cost parity with FCEVs at low electricity costs. Based on the scenario assumptions used here, low electricity costs would further help the cost parity with diesel vehicles in regional and long-haul cases due to stationary fueling downtime. This presentation also concludes that key factors affecting the parity potential of dWPT-capable vehicles include more extensive dWPT road coverage, higher en-route charging power, less expensive power batteries, and higher hydrogen or diesel fuel costs.

ADVANCED PROPULSION SYSTEMS,ENERGY PLANNING, POLIC↗
DOE OSTI2022

Nondestructive microstructural investigation of defects in 4H-SiC epilayers using a multiscale luminescence analysis approach

The development of metal oxide semiconductor field effect transistors (MOSFETs) utilizing epitaxially grown 4H-SiC has accelerated in recent years due to their favorable properties, including a high breakdown field, high saturated electron drift velocity, and good thermal conductivity. However, extended defects in epitaxial 4H-SiC can affect both device yields and operational lifetime. In this work, we demonstrate the importance of a multiscale luminescence characterization approach to studying nondestructively extended defects in epitaxial 4H-SiC semiconducting materials. Multiscale luminescence analysis reveals different aspects of excess charge carrier recombination behavior based on the scale of a particular measurement. Combining measurements of the same extended defect area at different scales tells us more about the essential nature of that defect and its microstructure. Here, we use photoluminescence imaging and cathodoluminescence spectrum imaging to investigate the recombination behavior of several different types of extended defects, including stacking faults, inclusions, and basal plane dislocations. A detailed understanding of the optoelectronic properties of extended defects in epitaxial SiC helps elucidate the microstructure of extended defects and can provide pathways to mitigate detrimental changes during device operation related to their evolution, such as the recombination enhanced dislocation glide effect that affects SiC-based MOSFETs.

3C-inclusion↗
DOE OSTI2022

Seven Percent Critical Experiment Core Analysis Approach on Fuel Rods – Core Configurations T155-NoMo, and T155-397Mo.

A series of experiments will be performed to test the integral effects of molybdenum on the reactivity of a critical system. These experiments will use the 7uPCX assembly with the 1.55 cm triangular pitch grid plates. Molybdenum sleeves, consisting of 19.6 inch long 0.5-inch nominal outside diameter molybdenum tubes with 0.031-inch nominal wall thickness and centering hardware, will be placed on some of the fuel rods in the array. The purpose of this analysis is to examine two configurations of the 7uPCX using the 1.55 cm triangular pitch grid plates in fully-reflected approach-to-critical experiments with the number of fuel rods in the array as the approach parameter. This document presents the results of the analysis that was done to allow completion of the 7uPCX Configuration Checklist from Appendix A of SPRF-AP-005 [SNL 2020] for the cores noted above. The checklists for these cores are shown in Appendix A.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

PET-FBA: A lightweight enzyme allocation and thermodynamics-constrained flux analysis approach to explore Escherichia coli metabolic adaptation to intracellular acidification

Escherichia coli employs diverse strategies to adapt to acidic environments that disrupt enzyme activity and the thermodynamic feasibility of essential reactions. To understand the impact of pH stress on cell metabolism, we present the PET-FBA (pH-, Enzyme protein allocation-, and Thermodynamics-constrained Flux Balance Analysis) framework. PET-FBA extends genome-scale modeling by integrating enzyme protein costs and reaction Gibbs free energy changes. Additionally, by incorporating pH-dependent enzyme kinetics in response to intracellular acidification, this framework enables the simulation of E. coli's metabolic adjustments across varying external pH levels. The model's accuracy is validated by comparing in silico growth simulations with experimental measurements under both anaerobic and aerobic conditions, as well as in silico gene knockouts of essential genes. By explicitly incorporating pH effects, our model accurately replicates the metabolic shift towards lactate production as the primary fermentation product at low pH in anaerobic conditions. This shift is only predicted when enzyme kinetics are dynamically adjusted as a function of pH. Further analysis revealed that this shift can be attributed to the reduced protein efficiency of the acetyl-CoA branch compared to lactate dehydrogenase under acidic stress, which then becomes crucial for maintaining NAD regeneration and cell growth at low pH. Furthermore, we identified strategies for enhancing cell growth under acidic anaerobic conditions by improving the enzyme activity of lactate dehydrogenase and pyruvate formate lyase, which increases NAD production efficiency and reduces enzyme protein allocation costs. Designed as a lightweight yet versatile framework, PET-FBA enables efficient genome-scale metabolic analysis. Using E. coli as a model system, our framework provides a systematic approach to understanding metabolic responses to environmental stress, pinpointing key metabolic bottlenecks, and identifying potential targets for strain optimization.

42 ENGINEERING↗
DOE OSTI2025

Comparative Economic Analysis Between Bioenergy and Forage Types of Switchgrass for Sustainable Biofuel Feedstock Production: A Data Envelopment Analysis and Cost–Benefit Analysis Approach

ABSTRACT The capacity to produce switchgrass efficiently and cost‐effectively across diverse environments can be pivotal in achieving the short‐ and medium‐term Sustainable Aviation Fuel targets set by the U.S. Department of Energy. This study evaluated the economic performance of forage‐ and bioenergy‐type switchgrass cultivars and their response to N fertilization under diverse marginal environments across the US Midwest that included Illinois (IL), Iowa (IA), Nebraska (NE), and South Dakota (SD). Data Envelopment Analysis (DEA) was used to evaluate the efficiency of 23 Decision‐Making Units (DMUs)—cultivar types and N fertilization rate combinations—while a cost–benefit analysis calculated their profitability over 5 years. Results showed that two energy‐type cultivars—“Independence” and “Liberty”—were superior economically to the forage cultivars. Independence performed best with the highest profit margin when fertilized at 56 kg N ha −1 , particularly in the US hardiness zone 6a (Urbana, IL). Liberty exhibited the highest profit margins in hardiness zone 5b (Madrid, IA, and Ithaca, NE) at 56 kg N ha −1 and showed exceptional profitability with 28 kg N ha −1 in hardiness zone 6b (Brighton, IL). Switchgrass cultivar “Carthage” showed better efficiency score and profitability results in hardiness zone 4b (South Shore, SD) at 56 kg N ha −1 . The profit trends observed in current study sites may indicate broader patterns across similar US hardiness zones. This study provides valuable insights for decision‐makers to optimize input strategies for biomass production of bioenergy switchgrass to meet renewable energy demands.

Arshad, Muhammad Umer [Department of Crop Sciences↗
DOE OSTI2026

Quantifying market volume sensitivity to material property modifications in polyhydroxybutyrate: A parametric analysis approach

Polyhydroxybutyrate (PHB), a biodegradable biopolymer, represents a promising alternative to petroleum-based thermoplastics. However, despite consistent market growth, PHB faces persistent commercialization challenges that limit widespread adoption. Existing research has focused predominantly on optimizing PHB production processes, leaving a critical gap in understanding which material property modifications would most effectively enhance market competitiveness. This study addresses this gap by systematically analyzing the relationship between polymer material properties and market performance using U.S. market data from 2008 to 2021 for 21 thermoplastic polymers across 19 material properties. We employed principal component regression to identify property modifications that could maximize market volume while reducing CO 2 emissions. Our parametric analysis revealed that two specific material properties – Hardness Shore A and Sheet Extrusion Temperature – significantly influence PHB marketability across different price points. Market simulations demonstrated that a 10% increase in Hardness Shore A could increase PHB market volume by 431.5 million kg while reducing emissions by 188.7 kg CO 2 . A similar 10% increase to Sheet Extrusion Temperature could yield a 297.5 million kg volume increase and a 99.2 kg CO 2 reduction in emissions. Critically, this approach is agnostic to the specific methods required to achieve these property changes, instead providing material scientists with quantitative, data-driven targets for R&D prioritization. Here, this framework offers a novel methodology for evaluating biopolymer competitiveness and supporting strategic decisions to accelerate PHB market adoption and contribute to decarbonization of the plastics industry.

09 BIOMASS FUELS↗
DOE OSTI2022

Resonant Ultrasonic Spectroscopy: A Modal-Analysis Approach for Additive Manufacturing

Resonant ultrasonic spectroscopy is a methodology capable of measuring a change in modal resonant frequencies of material structures. It encompasses an inversion technique based on the eigen-frequencies of a simple regular sample geometry to estimate the elastic tensor of a solid. Obtaining an accurate and complete set of resonant frequencies is a critical first step in the RUS process. In this paper a variety of techniques to extract and validate material resonances from complicated RUS measurement spectra are developed. Various processing methodologies employing modal analysis techniques are applied to estimate the underlying resonances that lead to the extraction of the elastic coefficients characterizing the specimen under test. A case study of a simple isotropic material (304 SS) is investigated to analyze the algorithms and evaluate their performance

Coal, lignite, and peat↗
DOE OSTI2022

A Combined DFT, Energy Decomposition, and Data Analysis Approach to Investigate the Relationship Between Noncovalent Interactions and Selectivity in a Flexible DABCOnium/Chiral Anion Catalyst System

Developing strategies to study reactivity and selectivity in flexible catalyst systems has become an important topic of research. Herein, we report a combined experimental and computational study aimed at understanding the mechanistic role of an achiral DABCOnium cofactor in a regio- and enantiodivergent bromocyclization reaction. In this study, it was found that electron-deficient aryl substituents enable rigidified transition states via an anion–π interaction with the catalyst, which drives the selectivity of the reaction. In contrast, electron-rich aryl groups on the DABCOnium result in significantly more flexible transition states, where interactions between the catalyst and substrate are more important. An analysis of not only the lowest-energy transition state structures but also an ensemble of low-energy transition state conformers via energy decomposition analysis and machine learning was crucial to revealing the dominant noncovalent interactions responsible for observed changes in selectivity in this flexible system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Towards Redefining the Reproducibility in Quantum Computing: A Data Analysis Approach on NISQ Devices

Although the building of quantum computers has kept making rapid progress in recent years, noise is still the main challenge for any application to leverage the power of quantum computing. Existing works addressing noise in quantum devices proposed noise reduction when deploying a quantum algorithm to a specified quantum computer. The reproducibility issue of quantum algorithms has been raised since the noise levels vary on different quantum computers. Importantly, existing works largely ignore the fact that the noise of quantum devices varies as time goes by. Therefore, reproducing the results on the same hardware will even become a problem. We analyze the reproducibility of quantum machine learning (QML) algorithms based on daily model training and execution data collection. Our analysis shows a correlation between our QML models’ test accuracy and quantum computer hardware’s calibration features. We also demonstrate that noisy simulators for quantum computers are not a reliable tool for quantum machine learning applications.

Senapati, Priyabrata↗
DOE OSTI2023

Polychlorinated biphenyls, polychlorinated dibenzo- p -dioxins, polychlorinated dibenzofurans, pesticides, and diabetes in the Anniston Community Health Survey follow-up (ACHS II): single exposure and mixture analysis approaches

Dioxins and dioxin-like compounds measurements were added to polychlorinated biphenyls (PCBs) and organochlorine pesticides to expand the exposure profile in a follow-up to the Anniston Community Health Survey (ACHS II, 2014) and to study diabetes associations. Participants of ACHS I (2005–2007) still living within the study area were eligible to participate in ACHS II. Diabetes status (type-2) was determined by a doctor's diagnosis, fasting glucose ≥125 mg/dL, or being on any glycemic control medication. Incident diabetes cases were identified in ACHS II among those who did not have diabetes in ACHS I, using the same criteria. Thirty-five ortho-substituted PCBs, 6 pesticides, 7 polychlorinated dibenzo-p-dioxins (PCDD), 10 furans (PCDF), and 3 non-ortho PCBs were measured in 338 ACHS II participants. Dioxin toxic equivalents (TEQs) were calculated for all dioxin-like compounds. Main analyses used logistic regression models to calculate odds ratios (OR) and 95 % confidence intervals (CI). In models adjusted for age, race, sex, BMI, total lipids, family history of diabetes, and taking lipid lowering medication, the highest ORs for diabetes were observed for PCDD TEQ: 3.61 (95 % CI: 1.04, 12.46), dichloro-diphenyl dichloroethylene (p,p’-DDE): 2.07 (95 % CI 1.08, 3.97), and trans-Nonachlor: 2.55 (95 % CI 0.93, 7.02). The OR for sum 35 PCBs was 1.22 (95 % CI: 0.58–2.57). To complement the main analyses, we used BKMR and g-computation models to evaluate 12 mixture components including 4 TEQs, 2 PCB subsets and 6 pesticides; suggestive positive associations for the joint effect of the mixture analyses resulted in ORs of 1.40 (95% CI: -1.13, 3.93) for BKMR and 1.32 (95% CI: -1.12, 3.76) for g-computation. Furthermore, the mixture analyses provide further support to previously observed associations of trans-Nonachlor, p,p’- DDE, PCDD TEQ and some PCB groups with diabetes.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Quantitative approaches for multiscale structural analysis with atomic resolution electron microscopy

Atomic-resolution imaging with scanning transmission electron microscopy is a powerful tool for characterizing the nanoscale structure of materials, in particular features such as defects, local strains, and symmetry-breaking distortions. In addition to advanced instrumentation, the effectiveness of the technique depends on computational image analysis to extract meaningful features from complex datasets recorded in experiments, which can be complicated by the presence of noise and artifacts, small or overlapping features, and the need to scale analysis over large representative areas. Here, we present image analysis approaches which synergize real and reciprocal space information to efficiently and reliably obtain meaningful structural information with picometer scale precision across hundreds of nanometers of material from atomic-resolution electron microscope images. Damping superstructure peaks in reciprocal space allows symmetry-breaking structural distortions to be disentangled from other sources of inhomogeneity and measured with high precision. Real-space fitting of the wavelike signals resulting from Fourier filtering enables absolute quantification of lattice parameter variations and strain, as well as the uncertainty associated with these measurements. Implementations of these algorithms are made available as an open source python package.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Study of η(1405)/η(1475) in $J/\psi \to \gamma {K}_S^0{K}_S^0{\pi}^0$ decay

Using a sample of (10 . 09 ± 0 . 04) × 10 9 J/ψ decays collected with the BESIII detector, partial wave analyses of the decay $ J/\psi \to \gamma {K}_S^0{K}_S^0{\pi}^0$ are performed within the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass region below 1.6 GeV/ c 2 . The covariant tensor amplitude method is used in both mass independent and mass dependent approaches. Both analysis approaches exhibit dominant pseudoscalar and axial vector components, and show good consistency for the other individual components. Furthermore, the mass dependent analysis reveals that the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass spectrum for the pseudoscalar component can be well described with two isoscalar resonant states using relativistic Breit-Wigner model, i.e., the η (1405) with a mass of $1391.7\pm {0.7}_{-0.3}^{+11.3}$ MeV/ c 2 and a width of $60.8\pm {1.2}_{-12.0}^{+5.5}$ MeV, and the η (1475) with a mass of $1507.6\pm {1.6}_{-32.2}^{+15.5}$ MeV/ c 2 and a width of $115.8\pm {2.4}_{-10.9}^{+14.8}$ MeV. The first and second uncertainties are statistical and systematic, respectively. Alternate models for the pseudoscalar component are also tested, but the description of the ${K}_S^0{K}_S^0{\pi}^0$ invariant mass spectrum deteriorates significantly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Predictive Modeling of NOx Emissions from Lean Direct Injection of Hydrogen and Hydrogen/Natural Gas Blends Using Flame Imaging and Machine Learning

This research paper explores the use of machine learning to relate images of flame structure and luminosity to measured NOx emissions. Images of reactions produced by 16 aero-engine derived injectors for a ground-based turbine operated on a range of fuel compositions, air pressure drops, preheat temperatures and adiabatic flame temperatures were captured and postprocessed. The experimental investigations were conducted under atmospheric conditions, capturing CO, NO and NOx emissions data and OH* chemiluminescence images from 27 test conditions. The injector geometry and test conditions were based on a statistically designed test plan. These results were first analyzed using the traditional analysis approach of analysis of variance (ANOVA). The statistically based test plan yielded 432 data points, leading to a correlation for NOx emissions as a function of injector geometry, test conditions and imaging responses, with 70.2% accuracy. As an alternative approach to predicting emissions using imaging diagnostics as well as injector geometry and test conditions, a random forest machine learning algorithm was also applied to the data and was able to achieve an accuracy of 82.6%. This study offers insights into the factors influencing emissions in ground-based turbines while emphasizing the potential of machine learning algorithms in constructing predictive models for complex systems.

08 HYDROGEN↗
DOE OSTI2022

Initial Development of Variable Design Lifetimes and Creep-Fatigue Evaluations for ASME Section III, Division 5, Class B Code Rules

This report summarizes the initial development of new ASME Section III, Division 5, Class B rules to address the gaps identified for new high temperature reactor designs. The overall objective is to introduce the design-by-analysis approach, the variable design lifetimes for primary load design, and the strain limits and creep-fatigue damage evaluations for Class B components. It is also desired that the new evaluation procedures do not require stress classification and stress linearization. Further, the data requirements to support the development of design parameters for the new Class B rules would not be overly burdensome, and less extensive than those supporting Class A rules. We have identified the Elastic, Perfectly Plastic (EPP) method as the design by-analysis approach for primary load design, and developed allowable stress criteria for variable design lifetimes, up to 500,000 hours, that only require data typical for the allowable stresses in Section II, Part D, Tables 1A and 1B. We have also adapted the elastic analysis approach from HBB-T-1400 and Section III, Mandatory Appendix XIII, XIII-2400 and XIII-3520(e) for the new Class B creep-fatigue evaluation procedure. A new elastic follow-up-based Isochronous Stress Strain Curve (ISSC) stress relaxation procedure has been developed to provide adequate conservatism commensurate with Class B constructions. No stress classification and stress linearization are required in the new procedure. Future work needed to complete the development is also summarized.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Interim Development of new Class B Code Case with Variable Design Lifetime and enhanced design rules to guard against cyclic structural failure mode

This report summarizes updates on the ongoing development of the new American Society of Mechanical Engineers Section III, Division 5, Class B rules to address the potential failure modes of Class B components. An initial design-by-analysis approach and supporting design rules are presented. The elastic-perfectly plastic (EPP) analysis approach has been adopted for primary stress limit and ratcheting check to prevent the component failure against the structural failure mode against primary load and strain accumulation due to cyclic loads. The creep-fatigue damage assessment uses explicitly defined elastic follow-up calculated from the stress concentration region of given component. Damage fraction calculation uses a novel coupled approach to capture the influence of the elastic follow-up and provide adequate conservatism for Class B components. The proposed Class B rules does not use the stress classification approach and uses the combined loads to assess component.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dynamic Approach to Dependency Analysis in Human Reliability Analysis: Application in a Stream Generator Tube Rupture Scenario

Dependency analysis in human reliability analysis (HRA) is a method of adjusting the failure probability of a given action by considering the impact of the action preceding it. It plays a role in reasonably accounting for human actions in the context of probabilistic safety assessments (PSAs), preventing PSA results from being estimated too optimistically based on the HRA results. Nevertheless, the existing dependency methods present a couple of challenges in that the quantification approaches rarely explain the adjustment of human error probabilities (HEPs). For this reason, the authors’ previous research has pointed out challenges of the existing dependency approaches and conceptually, theoretically proposed a performance shaping factor (PSF)-based dynamic dependency analysis method for HRA in order to complement the existing dependency methods. The current paper explores the latest version of the method and guidance for applying it to a steam generator tube rupture (SGTR) scenario.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Mechanism Analysis of Wind Turbine Var Oscillations

Electromagnetic transient simulation of parallel connected 4-MW type-3 wind turbines based on original equipment manufacturer's real-code turbine model shows 1.2-Hz turbine-turbine oscillations in reactive power. This letter reveals why such oscillations occur in the individual var measurement, while being insignificant in the total var measurement, regardless of the varying grid impedance. We adopt two analysis approaches: open-loop single-input single-output analysis and network decomposition. The two approaches differ in their treatment of turbine-network interaction. The open-loop analysis shows that the turbine-turbine oscillation mode is due to an open-loop system pole being attracted to an open-loop system zero. Furthermore, we use network decomposition method to explain why this mode is observable in individual vars while not observable in the total var. The entire system of n -turbines can be viewed as n decoupled circuits. For the two-turbine case, the system has an aggregated mode and a turbine-turbine oscillation mode. Here, the aggregated mode is associated with a circuit associated with the total var, while the turbine-turbine oscillation mode is associated with the var difference and is insensitive to the grid parameters.

17 WIND ENERGY↗