Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aboveground biomass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Aboveground Biomass Estimation Using NISAR Simulated ALOS-2 Time Series Data

Aboveground biomass (AGB) is a critical parameter to better understand the global carbon cycle and to develop sustainable forest management. However, a large uncertainty prevails. L-band SAR data have demonstrated strong potential to accurately retrieve AGB over low-biomass regions (<100 Mg ha-1). The upcoming NASA-ISRO Synthetic Aperture Radar mission will collect data at L- and S-band over earth’s landmass with a repeat period of 12 days, allowing us to have ample data for monitoring biomass and its dynamics. One of the key science requirements of the mission is to produce annual AGB maps at 1-ha resolution with RMS accuracy of 20 Mg/ha for 80 percentage of area over low-biomass regions in Calibration/Validation sites. The NISAR biomass algorithm will generate AGB maps based on the parameterization of semi-empirical model along with NISAR time-series dual pol data (HH and HV). To calibrate and validate the model for mission requirements, the mission will use reference estimates of AGB produced from ground inventory plots and airborne LiDAR data collected over selected sites distributed across different global ecoregions. This paper presents the initial results of the calibration/validation of the NISAR AGB retrieval algorithm over the Lenoir Landing (LENO), Alabama, USA site using NISAR simulated ALOS-2 time series data. Five multi-temporal dual-pol HH and HV NISAR Simulated ALOS 2 data collections were used as input to assess the performance of the model. The model AGB retrieval results shows that the NISAR model was able to achieve RMS accuracy within 20 Mg/ha.

Ramachandran, Naveen [Jet Propulsion Laboratory, C↗

Meta-analysis of North American Arctic and boreal aboveground biomass datasets: assessing accuracy, dynamics, and similarities

The North American arctic and boreal regions (ABRs) are rapidly warming and experiencing intensifying disturbances. Accurately quantifying aboveground biomass (AGB) is critical for understanding the impacts of these changes on the carbon cycle and for designing climate change mitigation strategies. Several AGB maps have been developed for the North American ABRs, including recent contributions from National Aeronautics and Space Administration’s Arctic-Boreal Vulnerability Experiment (ABoVE) campaign. However, these maps differ widely in training data, methodology, and resulting AGB density estimates. Presently, a comprehensive comparative evaluation is lacking, making it difficult for users to select datasets suited to their research or management needs. Here, in this study, we conducted a comparative analysis of nine AGB density datasets across North American ABRs, specifically for Alaska and Canada. We (1) summarized AGB by ecoregion and Canadian provinces, (2) evaluated their accuracy against field-based measurements, (3) analyzed spatial and temporal similarities among datasets, and (4) assessed their ability to capture disturbance (fire and harvest) impacts on AGB. We found substantial variation in regional and local AGB estimates across datasets, with overall accuracy ranging from R 2 = 0.25–0.62 and Bias% from −47.8% to 69.9% when validated against field plots. Despite these differences, most datasets have comparatively consistent spatial patterns in AGB (r > 0.8 for most cases). In contrast, agreement on the temporal patterns of AGB change is generally low. We found datasets with spatial resolutions ⩽300 m are capable of capturing disturbance impacts on AGB dynamics, though sensitivity varies across products. Our findings and dataset summary provide guidance for selecting appropriate AGB datasets for different applications within our study area. Our analysis also highlights the need to decrease map bias and increase capability to detect temporal change to decrease uncertainty of AGB datasets potentially by using training data which is representative of major plant functional types within the mapped area.

ABoVE↗

Forest aboveground biomass estimation through integration of sentinel-2 and PALSAR-2 time series: assessing models trained on GEDI and field inventory benchmarks

Accurate and spatially explicit forest Aboveground Biomass (AGB) mapping through remote sensing is critical for quantifying terrestrial carbon stocks and informing effective forest management strategies. However, AGB estimation in dense forests with complex terrain remains challenging due to satellite sensor signal saturation problem (saturation issue occurs in high biomass forests), structural complexity, and limited ground truth for calibration. This study presents a novel framework that integrates multi-temporal Sentinel-2 optical imagery, ALOS PALSAR-2 Synthetic Aperture Radar (SAR) data, and topographic variables with explainable Machine Learning to map AGB across mountainous forests within subtropical and temperate oceanic climate zones of Mexico. We evaluate the effects of temporal granularity and sensor synergy by comparing multiple temporal inputs and sensor configurations (Sentinel-2, PALSAR-2, and their fusion), and assess model performance using two reference datasets: NASA GEDI LiDAR-derived biomass and Mexico’s National Forest and Soil Inventory (INFyS). Our results showed that models trained on INFyS consistently outperformed those trained on GEDI, highlighting limitations in GEDI’s reliability in biomass estimates within this study region. Furthermore, the integration of Sentinel-2 and PALSAR-2 provided improved predictions compared to single-sensor models, particularly when combined with temporally explicit yearly statistics. The best-performing model, which was trained on INFyS data, and considered both Sentinel-2 and PALSAR-2 yearly statistics, as well as topographic variables, achieved an R2 of 0.64, RMSE of 51.10 Mg/ha, and relative RMSE (rRMSE) of 58.69%. Explainable ML analysis identified Sentinel-2 spectral indices and topographic features as key predictors, while PALSAR-2 metrics provided complementary information, partially mitigating saturation effects in high-biomass areas. Specifically, integrating both sensors substantially improved AGB estimation in high biomass forest (≥200 Mg/ha), yielding 98% gains over optical-only model, with resulting estimates exceeding GEDI L4B by 29% and ESA-CCI-BIOMASS by 174%. Terrain-stratified analysis indicated close agreement with GEDI in low-slope areas, with increasing divergence as slope steepness increased, while estimates remained consistently higher than ESA-CCI-BIOMASS across all slope classes. The proposed approach advances multi-sensor fusion and temporal feature engineering for AGB mapping using open-access satellite datasets, providing a scalable and reproducible framework for annual biomass monitoring in topographically complex mountainous forests. The resulting 25 m resolution biomass product has the potential to provide spatially detailed information for forest monitoring and may support applications in carbon accounting and forest management.

54 ENVIRONMENTAL SCIENCES↗

Estimation of Forest Aboveground Biomass from Derivatives of Vegetation-Structure Profiles

Several studies have found that the vertical Fourier transform of lidar, interferometric Synthetic Aperture Radar (SAR), and stereo photogrammetric profiles at empirically-determined spatial frequencies enables high-performance forest aboveground biomass (AGB) estimation. Linear combinations of real and imaginary parts of Fourier transforms of Tomographic (multi-baseline) SAR (TomoSAR) profiles, from Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) airborne data, generate ~20%-precision estimates of AGB in the Saskatchewan area of Canada. We found that this 20% precision can be improved to ~15%, a factor of 30% improvement in root mean square error (RMSE) if, in addition to using Fourier transforms of the profile itself, we use Fourier transforms of the spatial, vertical derivative of the profile. The formulation of this "derivative" algorithm is the subject of this paper.

Treuhaft, Robert↗

Comparison of Global Aboveground Biomass Estimates From Satellite Observations and Dynamic Global Vegetation Models

The global forest carbon stocks represent the amount of carbon stored in woody vegetation and are important for quantifying the ability of the global forests to sequester atmospheric CO 2 and to provide ecosystem services (e.g., timber) under climate change. The forest ecosystem carbon pool estimates are highly variable and poorly quantified in areas lacking forest inventory estimates. Here, we compare and analyze aboveground biomass (AGB) estimates from five satellite-based global data sets and nine dynamic global vegetation models (DVGMs). We find that across the data sets, mean AGB exhibits the largest variability around the tropical area. In addition, AGB shows a similar latitudinal trend but large variability among the data sets. Satellite-based AGB estimates are lower than those simulated by DVGMs. The divergence among the satellite-based AGB estimates can be driven by the methodology, input satellite products, and the forested areas used to estimate AGB. The modeled NPP, autotrophic respiration, and carbon allocation mostly drive the variability of AGB simulated by DGVMs. The future availability of a high-quality global forest area map is anticipated to improve AGB estimate accuracy and to reduce the discrepancies among different satellite- and model-based AGB estimates. Furthermore, we suggest the carbon-modeling community reexamine the methodology used to estimate AGB and forested areas for a more robust global forest carbon stock estimation.

54 ENVIRONMENTAL SCIENCES↗

Predicted aboveground biomass of Typha angustifolia in an upland brackish tidal marsh, PIE LTER, Byfield, MA (2022-2024)

This dataset contains predicted monthly aboveground Typha angustifolia biomass per sample and per square meter in a brackish tidal marsh site dominated by Typha angustifolia near the Parker River in the upper estuary of the Plum Island Sound, Massachusetts (MA) during the growing seasons (May-September) of 2022, 2023, and 2024. This site is also located within the Plum Island Ecosystems Long Term Ecological Research Station (PIE LTER). Allometric equations were developed from dry weight data and associated maximum heights collected in 2022 and 2023. The goal of this study was to investigate the difference in aboveground biomass between the site’s marsh interior (MI) and the creek bank (CB). Metadata files (Typha_biomass_predictions_dd.csv and Typha_biomass_predictions_flmd.csv) contain detailed information on variable definitions, calculations, sampling methods, and the location of the site.

DATE↗

Belowground plant allocation regulates rice methane emissions from degraded peat soils

Carbon-rich peat soils have been drained and used extensively for agriculture throughout human history, leading to significant losses of their soil carbon. One solution for rewetting degraded peat is wet crop cultivation. Crops such as rice, which can grow in water-saturated conditions, could enable agricultural production to be maintained whilst reducing CO 2 and N 2 O emissions from peat. However, wet rice cultivation can release considerable methane (CH 4 ). Water table and soil management strategies may enhance rice yield and minimize CH 4 emissions, but they also influence plant biomass allocation strategies. It remains unclear how water and soil management influences rice allocation strategies and how changing plant allocation and associated traits, particularly belowground, influence CH 4 -related processes. We examined belowground biomass (BGB), aboveground biomass (AGB), belowground:aboveground ratio (BGB:ABG), and a range of root traits (root length, root diameter, root volume, root area, and specific root length) under different soil and water treatments; and evaluated plant trait linkages to CH 4 . Rice (Oryza sativa L.) was grown for six months in field mesocosms under high (saturated) or low water table treatments, and in either degraded peat soil or degraded peat covered with mineral soil. We found that BGB and BGB:AGB were lowest in water saturated conditions where mineral soil had been added to the peat, and highest in low-water table peat soils. Furthermore, CH 4 and BGB were positively related, with BGB explaining 60% of the variation in CH 4 but only under low water table conditions. Our results suggest that a mix of low water table and mineral soil addition could minimize belowground plant allocation in rice, which could further lower CH 4 likely because root-derived carbon is a key substrate for methanogenesis. Minimizing root allocation, in conjunction with water and soil management, could be explored as a strategy for lowering CH 4 emissions from wet rice cultivation in degraded peatlands.

54 ENVIRONMENTAL SCIENCES↗

Aboveground woody biomass estimation of young bioenergy plantations of Populus and its hybrids using mobile (backpack) LiDAR remote sensing

Woody aboveground biomass (AGB) including short-rotation Populus is used as a feedstock for renewable and carbon-neutral bioenergy. While woody AGB can be estimated with allometric equations requiring labor-intensive field data, remote sensing technologies like mobile terrestrial light detection and ranging (LiDAR) can estimate woody AGB quickly and accurately. Therefore, the goals of this study were to develop a model to predict woody AGB of 2-year-old Populus spp. from three taxa (P. deltoides, P. deltoides × P. maximowiczii and P. deltoides × P. trichocarpa) using allometric (height and diameter at breast height (DBH)) or LiDAR-derived metrics from a mobile terrestrial (backpack) system. Likewise, we sought to compare LiDAR-estimated tree height and DBH with field-measured values. We found that a taxa-specific model containing LiDAR-measured tree height, crown volume, and taxa interactions with the height of the 10 th percentile, and the density of the lowest interval (density metric 0) explained 84 % of the variation in woody AGB with a root mean square error (RMSE) of 28.7 % and performed slightly better than the allometric model. The best model excluding taxa had a slightly higher RMSE but lower bias than the allometric model. LiDAR-derived tree heights were highly correlated with field-measured heights, but DBH could not be estimated accurately. Therefore, terrestrial mobile LiDAR systems can accurately estimate woody AGB and tree height of Populus in short rotation systems to aid in the fast and efficient quantification of woody bioenergy production and renewable energy resources.

AGB↗

Allometric and Mobile Terrestrial LiDAR Modeling of Aboveground Woody Biomass of Populus in Coppice Production

Poplars ( Populus spp.) and their hybrids are increasingly being grown in coppice production to generate bioenergy feedstocks at frequent intervals. Allometric equations are re-quired to predict aboveground biomass (AGB) of coppiced individuals with minimal field measurements. Likewise, remote sensing tools like LiDAR (light detection and ranging) can be used if models are available to predict AGB from point cloud data. Therefore, this study sought to develop equations to predict dry woody AGB from field measurements and LiDAR data from coppiced poplar field trials containing eastern cottonwood ( P. del-toides ) and hybrid poplar taxa. We found that taxa-specific allometric models containing the summed basal area of the three largest stems in the coppice provided the best predictive model, with stem height and stem count failing to provide additional explanatory power. The best predictive LiDAR-based model was independent of taxa but had slightly lower adjusted R 2 and higher RMSE than the allometric model. It contained four parameters including crown volume, leaf area index, variance of height returns, and the top point density (i.e., density metric 9 or the proportion of points in the highest point interval when the point cloud is evenly divided into ten vertical intervals). In total, these models can be used to quickly and efficiently estimate dry woody AGB of Populus coppice systems for bioenergy feedstock production.

AGB↗

Integrating State Data Assimilation and Innovative Model Parameterization Reduces Simulated Carbon Uptake in the Arctic and Boreal Region

Model representation of carbon uptake and storage is essential for accurate projection of the response of the arctic-boreal zone to a rapidly changing climate. Land model estimates of LAI and aboveground biomass that can have a marked influence on model projections of carbon uptake and storage vary substantially in the arctic and boreal zone, making it challenging to correctly evaluate model estimates of Gross Primary Productivity (GPP). To understand and correct bias of LAI and aboveground biomass in the Community Land Model (CLM), we assimilated the 8-day Moderate Resolution Imaging Spectroradiometer (MODIS) LAI observation and a machine learning product of annual aboveground biomass into CLM using an Ensemble Adjustment Kalman Filter (EAKF) in an experimental region including Alaska and Western Canada. Assimilating LAI and aboveground biomass reduced these model estimates by 58% and 72%, respectively. The change of aboveground biomass was consistent with independent estimates of canopy top height at both regional and site levels. The International Land Model Benchmarking system assessment showed that data assimilation significantly improved CLM's performance in simulating the carbon and hydrological cycles, as well as in representing the functional relationships between LAI and other variables. Here, to further reduce the remaining bias in GPP after LAI bias correction, we re-parameterized CLM to account for low temperature suppression of photosynthesis. The LAI bias corrected model that included the new parameterization showed the best agreement with model benchmarks. Combining data assimilation with model parameterization provides a useful framework to assess photosynthetic processes in LSMs.

58 GEOSCIENCES↗

Next generation Arctic vegetation maps: Aboveground plant biomass and woody dominance mapped at 30 m resolution across the tundra biome

The Arctic is warming faster than anywhere else on Earth, placing tundra ecosystems at the forefront of global climate change. Plant biomass is a fundamental ecosystem attribute that is sensitive to changes in climate, closely tied to ecological function, and crucial for constraining ecosystem carbon dynamics. However, the amount, functional composition, and distribution of plant biomass are only coarsely quantified across the Arctic. Therefore, we developed the first moderate resolution (30 m) maps of live aboveground plant biomass (g m −2 ) and woody plant dominance (%) for the Arctic tundra biome, including the mountainous Oro Arctic. We modeled biomass for the year 2020 using a new synthesis dataset of field biomass harvest measurements, Landsat satellite seasonal synthetic composites, ancillary geospatial data, and machine learning models. Additionally, we quantified pixel-wise uncertainty in biomass predictions using Monte Carlo simulations and validated the models using a robust, spatially blocked and nested cross-validation procedure. Observed plant and woody plant biomass values ranged from 0 to ∼6000 g m −2 (mean ≈ 350 g m −2 ), while predicted values ranged from 0 to ∼4000 g m −2 (mean ≈ 275 g m −2 ), resulting in model validation root-mean-squared-error (RMSE) ≈ 400 g m −2 and R 2 ≈ 0.6. Our maps not only capture large-scale patterns of plant biomass and woody plant dominance across the Arctic that are linked to climatic variation (e.g., thawing degree days), but also illustrate how fine-scale patterns are shaped by local surface hydrology, topography, and past disturbance. By providing data on plant biomass across Arctic tundra ecosystems at the highest resolution to date, our maps can significantly advance research and inform decision-making on topics ranging from Arctic vegetation monitoring and wildlife conservation to carbon accounting and land surface modeling.

Climate change↗

The Importance of Accounting for Landscape Position When Investigating Grasslands: A Multidisciplinary Characterisation of a California Coastal Grassland

Abstract Grasslands are one of the most common land‐cover types, providing important ecosystem services globally, yet few studies have examined grassland critical‐zone functioning throughout hillslopes. This study characterised a coastal grassland over a small hillslope at Point Reyes National Seashore, California, using multidisciplinary techniques, combining remotely‐sensed, geophysical, plant, and soil measurements. Clustering techniques delineated the study area into four landscape zones, up‐, mid‐, and down‐slope, and a bordering riparian ecotone, which had distinct environmental properties that varied spatially across the site, with depth, and time. Soil moisture increased with depth and down slope towards a bordering riparian zone, and co‐varied with soil CO 2 flux rates both spatially and temporally. This highlighted three distinct controls of soil moisture on soil respiration: CO 2 fluxes were inhibited by high moisture content in the down‐slope during the wet winter months, and converged across landscape positions in the dry summer months, while also displaying post‐rain pulses. The normalised difference vegetation index (NDVI) ranged from 0.32 (September)–0.80 (April) and correlated positively with soil moisture and aboveground biomass, moving down slope. Yet, NDVI, aboveground biomass, and soil moisture were not correlated to soil organic carbon (SOC) content (0.4%–4.5%), which was highest in the mid‐slope. The SOC content may instead be linked to shifts in dominant grassland species and their rhizosphere properties with landscape position. This multidisciplinary characterisation highlighted significant heterogeneity in grassland properties with landscape position, and demonstrated an approach that could be used to characterise other critical‐zone environments on hillslopes.

54 ENVIRONMENTAL SCIENCES↗

Data for Identifying the best high-biomass sorghum hybrids based on biomass yield potential and feedstock quality affected by nitrogen fertility management under various environments

Data were collected from agronomy fields in Urbana and Ewing, IL, during the 2022 and 2023 growing seasons. The dataset includes dry biomass yield, nitrogen, phosphorus, and potassium concentrations and removals, and chemical composition elements (cellulose, hemicellulose, lignin, and soluble fractions) for 13 high-biomass sorghum hybrids. data_sharing.xlsx contains 20 columns and 104 rows. Below is the explanation of all variables in the file: Year: 2022; 2023 Location: Urbana, IL; Ewing, IL N rate (kg-N/ha): 0; 112 Hybrid #: H1-H13 Pedigree: Pedigree for 13 hybrids Dry biomass yield (Mg/ha): Aboveground dry biomass yield N (g/kg): Nitrogen concentration in plant tissue P (g/kg): Phosphorus concentration in plant tissue K (g/kg): Potassium concentration in plant tissue N (kg/ha): Nitrogen removal by aboveground biomass P (kg/ha): Phosphorus removal by aboveground biomass K (kg/ha): Potassium removal by aboveground biomass Cellulose (g/kg): Cellulose concentration in plant tissue Hemicellulose (g/kg): Hemicellulose concentration in plant tissue Lignin (g/kg): Lignin concentration in plant tissue Soluble (g/kg): Soluble concentration in plant tissue Cellulose (Mg/ha): Cellulose content in aboveground biomass Hemicellulose (Mg/ha): Hemicellulose content in aboveground biomass Lignin (Mg/ha): Lignin content in aboveground biomass Soluble (Mg/ha): Soluble content in aboveground biomass

environmental adaptability↗

Functional but not taxonomic diversity increases productivity of Populus in the southeastern United States

Plant interactions like competition and facilitation impact ecosystem function and resilience. Improving our understanding of the relationships between these interactions and community productivity has important implications for managers of production systems in forestry and agriculture as well as conservation science. Populus spp. are an excellent model system for exploring how inter‐ and intraspecific interactions impact ecosystem functions, such as productivity, in forest plantations. In this study, we compared aboveground productivity of six Populus clones from three different taxa grown in monoclonal and mixed‐clonal plots. The different mixture treatments were intended to experimentally test aboveground biomass response to contrasting levels of taxonomic diversity and functional diversity based on nitrogen use characteristics of Populus clones. We hypothesize that functional diversity would be more important than taxonomic diversity in increasing aboveground productivity of mixed‐clonal plantings compared to monocultures. In addition, a subset of treatments was carried out on additional sites representing a productivity gradient in order to determine if the relationship between biodiversity and productivity in these systems diminished at more productive sites as suggested by the stress‐gradient hypothesis. We found that functionally diverse mixtures of clones had greater yield of aboveground biomass than the average of their constituent monocultures, while more taxonomically diverse mixes of clones did not differ from the average of their constituent monocultures. However, when reestablished on sites with extremely high or low productivity, the best performing clone mixture also did not differ from the average of its constituent monocultures. Our results suggest that intimate clone mixtures of Populus have the potential to significantly increase productivity, but results vary by mixture and by site. To capitalize on positive biodiversity effects on yield in production systems, targeted mixtures based on divergent functional traits linked to different use and acquisition strategies for site‐specific limiting resources are most likely to be successful.

BEF↗

Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape

Arctic warming is altering vegetation and carbon dynamics with global implications, yet Earth System Model (ESM) predictions in the Arctic remain highly uncertain, in part due to historically limited data for model parameterization and validation. As such, ESMs typically represent Arctic ecosystems in an oversimplified manner. Recently, nine plant functional types (PFTs) designed to realistically represent tundra vegetation were integrated into the Energy Exascale Earth System Model (E3SM) Land Model (ELM) and parameterized using plot-scale observations from a single site. Additional evaluation was needed to determine their transferability across the Arctic. Here, in this study, we evaluated whether refined representation of tundra vegetation improved model accuracy by conducting spatially explicit 100 × 100 m resolution ELM simulations on Alaska's Seward Peninsula. Simulations with the default two-PFT configuration and with the nine Arctic-specific PFTs were benchmarked against observations of net ecosystem exchange, gross primary production, and aboveground biomass from multiple data streams including an eddy covariance flux tower, flux chambers, and aircraft and unoccupied aerial system hyperspectral remote sensing. Evaluation revealed that Arctic-specific PFT simulations produced more realistic landscape-level carbon exchanges, and better captured observed heterogeneity in biomass and productivity, explaining 60%–70% of spatial variance (R 2 = 0.6–0.7) compared to just 12%–18% (R 2 = 0.12–0.18) with the default configuration. However, the refined model failed to reproduce observed aboveground biomass for highly productive alder-willow communities, requiring further evaluation of carbon allocation parameterizations for tall shrubs that are increasingly expanding across tundra landscapes. Our results demonstrate that enhanced representation of vegetation heterogeneity boosts predictive understanding of tundra carbon dynamics, facilitating regional to pan-Arctic model and remote-sensing scaling.

Murphy, Bailey A. [Oak Ridge National Laboratory (↗