Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Zirconium Carbide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Irradiation test of tungsten clad uranium carbide-zirconium carbide ((U,Zr)C) specimens for thermionic reactor application at conditions conductive to long-term performance

Uranium carbide fueled, thermionic emitter configurations were encapsulated and irradiated. One capsule contained a specimen clad with fluoride derived chemically vapor deposited (CVD) tungsten. The other capsule used a duplex clad specimen consisting of chloride derived on floride derived CVD tungsten. Both fuel pins were 16 millimeters in diameter and contained a 45.7-millimeter length of fuel.

Creagh, J. W. R.↗
DOE OSTI2022

Thermal Neutron Scattering Law Evaluation for Zirconium Carbide and Critical Mass Calculations

Zirconium carbide (ZrC) is a candidate material for use in advanced high temperature reactors, including space nuclear thermal propulsion applications. Thermal neutron scattering laws (TSLs) are generated for carbon bound in ZrC, C(ZrC), and zirconium bound in ZrC, Zr(ZrC), using ab initio lattice dynamics methods. These evaluations are to be submitted for inclusion in ENDF/B-VIII.1 and use the incoherent approximation for inelastic scattering as well as the new mixed elastic scattering treatment. The application of disordered alloy theory is introduced to appropriately capture the isotopic composition of Zr and C in the elastic scattering cross section. Localized higher energy vibrations in the C(ZrC) phonon density of states that are separated from lower energy modes result in quantized oscillations in the inelastic contributions to the TSL with a significant likelihood of large energy down-scattering and up-scattering interactions, where the latter increases in probability with temperature. The quanta of energy transfer during neutron thermalization is substantially greater than classically expected within the thermal neutron energy range. MC21 critical mass calculations of ZrC mixtures with high-enriched uranium demonstrate an impact of the TSLs when compared to free-gas treatment for 235 U concentrations less than 0.2 g/cm 3 . Additional MC21 critical mass calculations with homogenous mixtures of ZrC and reactor-grade graphite also demonstrate sensitivity to the ZrC TSL for thermal spectrum driven fission systems.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Exploring laser-material interactions of zirconium carbide under additive manufacturing conditions

Zirconium carbide (ZrC) is an ultra-high temperature ceramic with a melting temperature above 3000°C and a broad range of high temperature applications. Given the high melting and sintering temperatures of pure ZrC, producing near-net shape and fully dense parts remains challenging with conventional techniques. In this study, we investigate the fundamental laser-material interactions of ZrC under laser powder bed fusion (LPBF) additive manufacturing (AM) conditions. Normalized enthalpy, a scaling law term that is used in welding and AM literature for detailing laser-material interactions in metallic alloys, was calculated to determine the predictive capabilities of melt pool features in ZrC. Further, the melt pool quality of laser irradiated ZrC was used to compare LPBF relevant laser parameter combinations of laser power, scan speed, and beam diameter. Laser build parameters that resulted in desirable melt pool morphologies were applied to the fabrication of ZrC coupons using LPBF AM. A custom LPBF system was used to determine hatch spacing and layer height parameters that resulted in a fabricated sample with a density of 85% as measured by Archimedes and a Vicker's microhardness of 20.9 ± 1.9 GPa. This investigation reveals the laser-material interactions of ZrC under AM relevant conditions and is the first step towards LPBF fabrication of ZrC parts.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterization of zirconium carbide microspheres synthesized via internal gelation

Microspheres of zirconium carbide with grain size 40-320 nm were synthesized using internal gelation techniques and characterized by scanning electron microscopy, synchrotron X-ray diffraction, and neutron total scattering. Compared with a polycrystalline benchmark ZrC sample prepared by plasma vapor phase deposition, the microspheres display lower variance in grain size and considerably lower microstrain representative of a more homogenous internal microstructure. However, excess carbon was present in the microspheres, evident in both the X-ray and neutron diffraction data as well as a corresponding hypostoichiometric ZrC phase. Furthermore, the excess carbon phase is assumed to be pockets of carbon that remained unreacted through the combined internal gelation and subsequent carbothermic reduction synthesis process. Atomic-scale structural characterization with neutron PDF analysis confirmed the presence of localized nano-sized domains of graphite-like carbon material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal Neutron Scattering Law Evaluations for Zirconium Carbide and Critical Mass Calculations [Slides]

Zirconium Carbide (ZrC) is a refractory material currently being investigated for high temperature reactor applications. ZrC was studied as a base of (U,Zr)C solid solution and UC 2 composite fuels for NERVA-type cores during the Rover program. Testing of the material was performed at Nuclear Furnace 1 (NF-1) located at Los Alamos. Thermal Scattering Law (TSL) evaluations generated with FLASSH are a new contribution to ENDF/B-VIII.1.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2026

Thermodynamic Properties of Uranium-Zirconium Carbide Solid Solutions with Oxygen

Uranium-zirconium carbide solid solutions are potential candidates for fuel in space nuclear reactors. To support development of advanced robust fuels for space applications, (U y Zr 1-y )C x O z solid solutions were synthesized via carbothermic reduction with uranium, carbon, and oxygen contents raging from y=0.05 – 0.3, x=0.95 – 0.98, and z = 0.02 – 0.07. These solid solutions were subsequently characterized by X-ray diffraction and elemental combustion analysis. High-temperature oxidative drop solution calorimetry in molten sodium molybdate solvent at 1073 K was employed to determine the formation, oxidation, and mixing enthalpies of (U y Zr 1-y )C x O z solid solutions, and thereby for evaluating their thermodynamic stability. The solid solutions are enthalpically less stable than the UC and ZrC end members. They also become less stable and more reactive towards oxidation with increasing uranium content. Incorporation of oxygen into solid solutions increases their solid solution-stability and improves their oxidation resistance.

Calorimetry↗
NASA NTRS1976

Plastic deformation of polycrystalline zirconium carbide

The compressive yield strength of arc-melted polycrystalline zirconium carbide has been found to vary from 77 kg per sq mm at 1200 C to 19 kg per sq mm at 1800 C. Yield drops were observed with plastic strain-rates greater than 0.003/sec but not with slower strain rates. Strain-rate change experiments yielded values for the strain-rate sensitivity parameter m which range from 6.5 at 1500 C to 3.8 at 1800 C, and the product dislocation velocity stress exponent times T was found to decrease linearly with increasing temperature. The deformation rate results are consistent with the Kelly-Rowcliffe model in which the diffusion of carbon assists the motion of dislocations.

Darolia, R.↗
DOE OSTI2020

An investigation of the long-range and local structure of sub-stoichiometric zirconium carbide sintered at different temperatures

ZrC 1-x (sub-stoichiometric zirconium carbide), a group IV transition metal carbide, is being considered for various high temperature applications. Departure from stoichiometry changes the thermo-physical response of the material. Reported thermo-physical properties exhibit, in some cases, a degree of scatter with one likely contributor to this being the uncertainty in the C/Zr ratio of the samples produced. Conventional, methods for assigning C/Zr to samples are determined either by nominal stochiometric ratios or combustion carbon analysis. In this study, a range of stoichiometries of hot-pressed ZrC 1-x were examined by SEM, XRD, Raman spectroscopy and static 13 C NMR spectroscopy and used as a basis to correct the C/Zr. Graphite, amorphous, and ZrC 1-x carbon signatures are observed in the 13 C NMR spectra of samples and are determined to vary in intensity with sintering temperature and stoichiometry. In this study a method is outlined to quantify the stoichiometry of ZrC 1-x and free carbon phases, providing an improvement over the sole use and reliance of widely adopted bulk carbon combustion analysis. We report significantly lower C/Zr values determined by 13 C NMR analysis compared with carbon analyser and nominal methods. Furthermore, the location of carbon disassociated from the ZrC 1-x structure is analysed using SEM and Raman spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Zirconium Carbide Mediates Coke‐Resistant Methane Dry Reforming on Nickel‐Zirconium Catalysts

Abstract Graphitic deposits anti‐segregate into Ni 0 nanoparticles to provide restored CH 4 adsorption sites and near‐surface/dissolved C atoms, which migrate to the Ni 0 /ZrO 2 interface and induce local Zr x C y formation. The resulting oxygen‐deficient carbidic phase boundary sites assist in the kinetically enhanced CO 2 activation toward CO(g). This interface carbide mechanism allows for enhanced spillover of carbon to the ZrO 2 support, and represents an alternative catalyst regeneration pathway with respect to the reverse oxygen spillover on Ni‐CeZr x O y catalysts. It is therefore rather likely on supports with limited oxygen storage/exchange kinetics but significant carbothermal reducibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRSDate not supplied

Additive Manufacture of Porous Zirconium Carbide for Nuclear Thermal Propulsion In-Core Insulators

Nuclear Thermal Propulsion (NTP) requires the use of in-core insulators to manage to thermal environment between high temperature fuel elements and lower temperature structural components. The unforgiving in-core operating conditions severely limit potential material candidates. Zirconium Carbide (ZrC) is a promising candidate due to a high melting temperature, high compressive strength, hardness, wear resistance, hydrogen compatibility, and low neutron absorption cross sections. However, fully dense ZrC is not an insulator but it has been found that the thermal conductivity of ZrC decreases by increasing porosity to approximately 60 % theoretical density (%TD). Previous methods for generating porous ZrC were difficult, expensive, and time consuming. Binder jet additive manufacture (AM) can print ceramic materials to near net shape. Binder jet AM is not utilized in many applications due to an inherently low post-sintering density on the order of 60 %TD. For this specific application the inherent lower density is leveraged as an advantage in production porous ZrC in order to control the thermal conductivity. A feasibility study was conducted to investigate binder jet AM parameter development for ZrC, heat treatment optimization (burn-out and sinter), microstructural characterization, mechanical testing, and thermal testing to generate near-net shape ZrC components with ~60 %TD with the desired thermal conductivity and mechanical strength.

Zirconium Carbide Additive Manufacture↗
NASA NTRSDate not supplied

Additive Manufacture of Porous Zirconium Carbide for Nuclear Thermal Propulsion In-Core Insulators

Nuclear Thermal Propulsion (NTP) requires the use of in-core insulators to manage to thermal environment between high temperature fuel elements and lower temperature structural components. The unforgiving in-core operating conditions severely limit potential material candidates. Zirconium Carbide (ZrC) is a promising candidate due to a high melting temperature, high compressive strength, hardness, wear resistance, hydrogen compatibility, and low neutron absorption cross sections. However, fully dense ZrC is not an insulator but it has been found that the thermal conductivity of ZrC decreases by increasing porosity to approximately 60 % theoretical density (%TD). Previous methods for generating porous ZrC were difficult, expensive, and time consuming. Binder jet additive manufacture (AM) can print ceramic materials to near net shape. Binder jet AM is not utilized in many applications due to an inherently low post-sintering density on the order of 60 %TD. For this specific application the inherent lower density is leveraged as an advantage in production porous ZrC in order to control the thermal conductivity. A feasibility study was conducted to investigate binder jet AM parameter development for ZrC, heat treatment optimization (burn-out and sinter), microstructural characterization, mechanical testing, and thermal testing to generate near-net shape ZrC components with ~60 %TD with the desired thermal conductivity and mechanical strength.

Zirconium Carbide Additive Manufacture↗
DOE OSTI2023

Grain size dependence of thermally induced oxidation in zirconium carbide

Here complementary analytical approaches were employed to probe the effect of grain size on thermally induced oxidation of zirconium carbide (ZrC) utilizing thermogravimetric analysis, differential scanning calorimetry, and Raman spectroscopy, as well as synchrotron-based and laboratory-based X-ray diffraction (XRD) experiments. The oxidation mechanism and phase behavior of nanocrystalline ZrC (grain size ~ 20 nm) were compared with that of the more documented microcrystalline ZrC (grain size ~ 1 µm). Synchrotron XRD at the Advanced Photon Source with a hydrothermal diamond anvil cell (HDAC) used as a sample chamber revealed that the onset of oxidation is at ~ 380 °C for microcrystalline ZrC which is in agreement with previous work. In contrast, the critical oxidation temperature was ~ 330 °C for nanocrystalline ZrC. Additional high-temperature synchrotron XRD experiments at the National Synchrotron Light Source II using a lamp furnace in combination with Raman analysis showed that tetragonal ZrO 2 forms as an initial oxidation product and transforms at higher temperatures to the monoclinic phase. Thermogravimetric analysis (TGA) coupled with differential scanning calorimetry (DSC) confirmed the X-ray results of a lower critical oxidation temperature for the nanocrystalline sample. The phase transformations in the oxide phase with associated critical temperatures were also evident in the thermodynamic data as exothermic heat events.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗