Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ZINC 70”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2011

Double {beta} experiments with the help of scintillation and HPGe detectors at Gran Sasso

A search for double beta decay of {sup 64,70}Zn, {sup 180,186}W was carried out by using low background ZnWO{sub 4} crystal scintillators, while a CeCl{sub 3} scintillation detector was applied to investigate 2{beta} processes in {sup 136,138,142}Ce. A search for 2{beta} decay of {sup 96,104}Ru, {sup 156,158}Dy, {sup 190,198}Pt and study of 2{nu}2{beta} decay of {sup 100}Mo to the first excited 0{sup +} level of {sup 100}Ru were realized by ultra-low background HPGe {gamma} spectrometry. Moreover, CdWO{sub 4} crystal scintillators from enriched {sup 106}Cd and {sup 116}Cd isotopes were developed to search for 2{beta} decay of {sup 106}Cd and {sup 116}Cd. Finally, experiments aimed to investigate {sup 96,104}Ru and {sup 116}Cd are in progress and a new phase of the experiment to search for 2{beta} processes in {sup 106}Cd is in preparation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Nuclear Data Sheets for A = 70

Spectroscopic data for all nuclei with mass number A = 70 have been evaluated, and the corresponding level schemes from radioactive decay and reaction studies are presented. Since the previous evaluation, the half-life of {sup 70}Mn has been measured and excited states in {sup 70}Fe observed for the first time. Excited states in {sup 70}Ni have been more extensively studied while Coulomb excitation and collinear laser spectroscopy measurements in {sup 70}Cu have allowed for firm Jπ assignments. Despite new measurements, there remain some discrepancies in half-lives of low lying states in {sup 70}Zn. New measurements have extended the knowledge of high-spin band structures in {sup 70}Ge and {sup 70}As. This evaluation supersedes the prior A = 70 evaluation of 2004Tu09.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2013

Development of deformation in the island of inversion at N=40

The A Asymptotically-Equal-To 60-70 mass region of neutron-rich nuclei with Z{<=} 28 presents several interesting properties when approaching N= 40. At this subshell closure a new region of deformation develops. From the experimental side, these nuclei can be populated by means of multi-nucleon and deep inelastic collisions. Recent results on the gamma-ray spectroscopy of the neutron-rich nuclei in this mass region are discussed. In particular, the evolution of the nuclear shape is studied in {sup 65,67}Co isotopes, populated by bombarding a {sup 238}U target with a 460 MeV {sup 70}Zn beam at the Legnaro National Laboratory. A shape-coexistence structure is observed in {sup 67}Co. The experimental results are interpreted within the shell model framework in a very large model space. These calculations are able to describe with good accuracy the excited states observed in {sup 65,67}Co, at the edge of the island of inversion at N=40.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Evolution of the N = 40 neutron subshell in 20 ≤ Z ≤ 30 nuclei within the dispersive optical model

The evolution of single-particle neutron spectra in the N = 40 isotones {sup 60}Ca, {sup 62}Ti, {sup 64}Cr, {sup 66}Fe, {sup 68}Ni, and {sup 70}Zn is calculated on the basis of the mean-field model featuring a dispersive optical potential. The results of these calculations agree with the idea that the degree of collectivity becomes higher in the {sup 64}Сr nucleus and that the coupling of single-particle motion to this collectivity becomes stronger, as well as with available experimental data, which are indicative of the closure of the N = 40 subshell in {sup 68}Ni and of the trend toward this closure in {sup 60}Ca.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1972

Development of GaAs solar cells

Solar cells and mesa diodes were fabricated by the implantation of zinc or beryllium ions into n-type gallium arsenide. Annealing temperatures above 750 C (zinc) or 650 C (beryllium) were found to produce 50% to 100% activation of the implanted ions. Junction depths of about 0.4 micron were produced by 600 keV zinc implants or 70 keV beryllium implants. P-layer sheet resistance was about 150 ohms for 2 x 10 to the 15th power cm/2 zinc or 1 x 10 to the 15th power cm/2 beryllium implants. This is sufficiently low for efficient solar cell fabrication. Contacting procedures were improved to yield reproducibly adherent, low resistance front and back contacts.

Source record↗
DOE OSTI2021

Reducing Zinc Redistribution and Extending Cycle Life Via Electrochemical Synthesis of Zinc/Zinc Oxide Anodes in Rechargeable Alkaline Batteries

Redistribution of zinc over the electrode surface, also known as shape change, is a major problem and a cause of failure in alkaline zinc anode batteries. To mitigate this phenomenon, we propose a scalable approach based on an in situ formed, highly porous electrochemically synthesized ZnO matrix with uniformly electrodeposited zinc particles. This results in ∼70% improvement in cycle life performance at a rate of 10 mA cm −2 compared to control Zn anodes, which have not gone through the formation process. A quantitative electrolyte analysis revealed under-saturated zincate ion concentration in the electrochemically synthesized ZnO/Zn cells indicating reduced zincate movement. Post mortem analysis of the anodes indicated higher retention of both Zn and ZnO on the electrochemically synthesized ZnO anodes signifying reduced redistribution of active material. Image analysis of the cycled anodes revealed a narrower Zn particle size distribution (62−79 μ m) in contrast to a wider particle size distribution of 51–96 μ m observed in the control anodes. The formation approach results in electrochemically synthesized ZnO/Zn anodes providing a stable ZnO matrix in which Zn particles retain their localized distribution on cycling better than control electrodes conventionally made by pasting zinc particles together with a binder.

Kolhekar, Snehal (ORCID:0000000210321153)↗
DOE OSTI2019

High Resistance of Resting Eggs of Cladoceran Moina macrocopa to the Effect of Heavy Metals

The research aimed to determine critical concentrations of heavy metals at which survival of resting eggs of the cladoceran Moina macrocopa is negatively affected. Resting eggs’ viability was not affected over a 30-days exposure towards copper, cadmium, zinc or nickel at concentrations up to 60–70 g/L. When resting eggs were exposed to sediment contaminated with heavy metals for 8 months, the hatching success was affected at 30 g copper/kg. Thus, resting eggs of Cladocera can tolerate heavy metals at concentrations that far exceed lethal concentrations of heavy metals to active life stage and exceed low or moderate levels of environmental pollution. Follow up investigation of life table parameters of hatchlings from resting eggs exposed to heavy metals demonstrated that neither lifespan nor fecundity of hatchlings differ from control animals. These results demonstrate that zooplankton may rapidly recover from resting egg bank once aquatic habitat becomes unpolluted.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

β Decay in the Region of Neutron-deficient {sup 69,70,71}Kr

Decay spectroscopy was performed for neutron-deficient nuclei ranging from zinc to krypton with isospin −3/2 ≤T{sub z}≤0. Measurements of correlated β-delayed protons allowed us to determine the isobaric analog states fed from the decay of {sup 65}Se and {sup 69}Kr, constraining the spin of the {sup 69}Kr ground state. Preliminary results regarding the half lives for the T{sub z}=−1 systems, relevant to the rapid proton capture (rp) process, are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2015

Semiconductor to metallic transition in bulk accumulated amorphous indium-gallium-zinc-oxide dual gate thin-film transistor

We investigated the effects of top gate voltage (V{sub TG}) and temperature (in the range of 25 to 70 {sup o}C) on dual-gate (DG) back-channel-etched (BCE) amorphous-indium-gallium-zinc-oxide (a-IGZO) thin film transistors (TFTs) characteristics. The increment of V{sub TG} from -20V to +20V, decreases the threshold voltage (V{sub TH}) from 19.6V to 3.8V and increases the electron density to 8.8 x 10{sup 18}cm{sup −3}. Temperature dependent field-effect mobility in saturation regime, extracted from bottom gate sweep, show a critical dependency on V{sub TG}. At V{sub TG} of 20V, the mobility decreases from 19.1 to 15.4 cm{sup 2}/V ⋅ s with increasing temperature, showing a metallic conduction. On the other hand, at V{sub TG} of - 20V, the mobility increases from 6.4 to 7.5cm{sup 2}/V ⋅ s with increasing temperature. Since the top gate bias controls the position of Fermi level, the temperature dependent mobility shows metallic conduction when the Fermi level is above the conduction band edge, by applying high positive bias to the top gate.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Recovery of yttrium from fluorescent powder of cathode ray tube, CRT: Zn removal by sulphide precipitation

Highlights: • Treatment of fluorescent powder of CRT waste. • Factorial experimental designs to study acid leaching of fluorescent powder and the purification of leach liquors. • Recover of yttrium by precipitation using oxalic acid. • Suitable flowsheet to recover yttrium from fluorescent powder. - Abstract: This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 2{sup 2} full factorial plan and the highest extraction yields for yttrium and zinc equal to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H{sub 2}O{sub 2} concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction. Two series of precipitation tests for zinc are carried out: a 2{sup 2} full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na{sub 2}S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%. Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2007

A Hard-X-Ray Telescope Science Enhancement Package for the Constellation-X Mission

We present a science enhancement package (SEP) for NASA's planned Constellation-X mission submitted in response to a call for white papers. The call solicited proposals for either extending the bandwidth of Con-X to higher energies or enhancing the low-energy spectral resolution. The ground rules were that enhancement package should cost no more than $100M and weigh no more than 100 kg. The nickel-replicated-optics team responded with a stand-alone hard-x-ray telescope SEP concept. This consisted of two mirror modules, each with approximately 70 multilayer and iridium-coated shells, and two corresponding cadmium-zinc-telluride-based focal plane detectors. Addition of this package permits measurement of the hard-x-ray continuum up to 30-40 keV, which is essential for a quantitative measurement of the spectrum of gravitationally broadened iron lines that appear in the spectra of many black hole candidates. Full details of the instrument will be presented showing trades in energy bandwidth and effective area together with the full science justification for the enhancement package.

Ramsey, Brian↗
DOE OSTI2013

Third order nonlinear optical properties of bismuth zinc borate glasses

Third order nonlinear optical characterization of bismuth zinc borate glasses are reported here using different laser pulse durations. Bismuth zinc borate glasses with compositions xBi{sub 2}O{sub 3}-30ZnO-(70-x) B{sub 2}O{sub 3} (where x = 30, 35, 40, and 45 mol. %) have been prepared by melt quenching method. These glasses were characterized by Raman, UV-Vis absorption, and Z scan measurements. Raman and UV-Vis spectroscopic results indicate that non-bridging oxygens increase with increase of bismuth content in the glass. Nonlinear absorption and refraction behavior in the nanosecond (ns), picosecond (ps), and femtosecond (fs) time domains were studied in detail. Strong reverse saturable absorption due to dominant two-photon absorption (TPA) was observed with both ps and fs excitations. In the case of ns pulse excitations, TPA and free-carrier absorption processes contribute for the nonlinear absorption. Two-photon absorption coefficient (β) and the absorption cross section due to free carriers (σ{sub e}) are estimated by theoretical fit of the open aperture Z-scan measurements and found to be dependent on the amount of bismuth oxide in the glass composition. In both ns and fs regimes the sign and magnitude of the third order nonlinearity are evaluated, and the optical limiting characteristics are also reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1974

Long life, rechargeable nickel-zinc battery

A production version of the inorganic separator was evaluated for improving the life of the nickel-zinc system. Nickel-zinc cells (7-10 Ah capacities) of different electrode separator configurations were constructed and tested. The nickel-zinc cells using the inorganic separator encasing the zinc electrode, the nickel electrode, or both electrodes had shorter lives than cells using Visking and cellophane separation. Cells with the inorganic separation all fell below 70% of their theoretical capacity within 30 cycles, but the cells constructed with organic separation required 80 cycles. Failure of the cells using the ceramic separator was irreversible capacity degradation due to zinc loss through cracks developed in the inorganic separator. Zinc loss through the separator was minimized with the use of combinations of the inorganic separator with Visking and cellophane. Cells using the combined separation operated 130 duty cycles before degrading to 70% of their theoretical capacity.

Luksha, E.↗
DOE OSTI2017

Study of silicon doped with zinc ions and annealed in oxygen

The results of studies of the surface layer of silicon and the formation of precipitates in Czochralski n-Si (100) samples implanted with {sup 64}Zn{sup +} ions with an energy of 50 keV and a dose of 5 × 10{sup 16} cm{sup –2} at room temperature and then oxidized at temperatures from 400 to 900°C are reported. The surface is visualized using an electron microscope, while visualization of the surface layer is conducted via profiling in depth by elemental mapping using Auger electron spectroscopy. The distribution of impurity ions in silicon is analyzed using a time-of-flight secondary-ion mass spectrometer. Using X-ray photoelectron spectroscopy, the chemical state of atoms of the silicon matrix and zinc and oxygen impurity atoms is studied, and the phase composition of the implanted and annealed samples is refined. After the implantation of zinc, two maxima of the zinc concentration, one at the wafer surface and the other at a depth of 70 nm, are observed. In this case, nanoparticles of the Zn metal phase and ZnO phase, about 10 nm in dimensions, are formed at the surface and in the surface layer. After annealing in oxygen, the ZnO · Zn{sub 2}SiO{sub 4} and Zn · ZnO phases are detected near the surface and at a depth of 50 nm, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2013

X-ray Thomson scattering measurements of temperature and density from multi-shocked CH capsules

Proof-of-principle measurements of the electron densities, temperatures, and ionization states of spherically compressed multi-shocked CH (polystyrene) capsules have been achieved using spectrally resolved x-ray Thomson scattering. A total energy of 13.5 kJ incident on target is used to compress a 70 μm thick CH shell above solid-mass density using three coalescing shocks. Separately, a laser-produced zinc He-α x-ray source at 9 keV delayed 200 ps-800 ps after maximum compression is used to probe the plasma in the non-collective scattering regime. The data show that x-ray Thomson scattering enables a complete description of the time-dependent hydrodynamic evolution of shock-compressed CH capsules, with a maximum measured density of ρ > 6 g cm –3 . Additionally, the results demonstrate that accurate measurements of x-ray scattering from bound-free transitions in the CH plasma demonstrate strong evidence that continuum lowering is the primary ionization mechanism of carbon L-shell electrons.

42 ENGINEERING↗
DOE OSTI2013

Preparation of patterned graphene-ZnO hybrid nanoflower and nanorods on ITO surface

Hybrid ZnO nanostructure with controlled morphology have been proved to enhance the physical and chemical properties of the material and used as photodiode and sensor. In this paper, hybrid graphene-ZnO nanoflower and nanorods have been successfully synthesized via a seed mediated method with micropatterned ZnO nanoseed treated with multilayer graphene (MLG) in a hydrothermal process. In typical process, the ZnO nanoseeds with and without resists were spin coated with a multilayer graphene prior to the growth process. The treated seed was then used to grow the ZnO nanostructures in the growth solution that contained equimolar (0.04 M) of zinc nitrate hexahydrate and hexamethylenetetramine. The growth process was carried out inside an autoclave at temperature 70 °C. The growth time was 4 h. It was proved that the MLG treatment on micropatterning substrate may induce new morphology formation of ZnO nanostructure. It is expected that the heteroepitaxy reaction occurred between the MLG and ZnO interface. This presence method can be used as an alternative approach to control the morphology of hybrid ZnO nanostructure growth.

36 MATERIALS SCIENCE↗